OpenCores
URL https://opencores.org/ocsvn/qaz_libs/qaz_libs/trunk

Subversion Repositories qaz_libs

[/] [qaz_libs/] [trunk/] [basal/] [src/] [FIFOs/] [ohmkara/] [sync_fifo.v] - Rev 35

Go to most recent revision | Compare with Previous | Blame | View Log

///////////////////////////////////////////////
// Author: Deepak (28/03/2009 08:54)
// Module: fifo.v
// Project:
// Description: Synchronous FIFO
//    data output (dout) is un-registered.
// Version: 1.1 (not icarus verilog compatible)
//
///////////////////////////////////////////////
 
module sync_fifo
#(
 parameter DATA_WIDTH = 8,
 parameter DEPTH = 8</pre>
)
(
 input [DATA_WIDTH-1:0]  din,
 input wr_en,
 input rd_en,
 output [DATA_WIDTH-1:0] dout,
 output reg full,
 output reg empty,
 
 input clk,
 input reset
);
 
function integer log2;
 input integer n;
 begin
 log2 = 0;
 while(2**log2 < n) begin
 log2=log2+1;
 end
 end
endfunction
 
parameter ADDR_WIDTH = log2(DEPTH);
reg   [ADDR_WIDTH : 0]     rd_ptr; // note MSB is not really address
reg   [ADDR_WIDTH : 0]     wr_ptr; // note MSB is not really address
wire  [ADDR_WIDTH-1 : 0]  wr_loc;
wire  [ADDR_WIDTH-1 : 0]  rd_loc;
reg   [DATA_WIDTH-1 : 0]  mem[DEPTH-1 : 0];
 
assign wr_loc = wr_ptr[ADDR_WIDTH-1 : 0];
assign rd_loc = rd_ptr[ADDR_WIDTH-1 : 0];
 
always @(posedge clk) begin
 if(reset) begin
 wr_ptr <= 'h0;
 rd_ptr <= 'h0;
end // end if
else begin
 if(wr_en & (~full))begin
 wr_ptr <= wr_ptr+1;
 end
 if(rd_en & (~empty))
 rd_ptr <= rd_ptr+1;
 end //end else
end//end always
 
//empty if all the bits of rd_ptr and wr_ptr are the same.
//full if all bits except the MSB are equal and MSB differes
always @(rd_ptr or wr_ptr)begin
 //default catch-alls
 empty <= 1'b0;
 full  <= 1'b0;
 if(rd_ptr[ADDR_WIDTH-1:0]==wr_ptr[ADDR_WIDTH-1:0])begin
 if(rd_ptr[ADDR_WIDTH]==wr_ptr[ADDR_WIDTH])
 empty <= 1'b1;
 else
 full  <= 1'b1;
 end//end if
end//end always
 
always @(posedge clk) begin
 if (wr_en)
 mem[wr_loc] <= din;
end //end always
 
//comment if you want a registered dout
assign dout = rd_en ? mem[rd_loc]:'h0;
//uncomment if you want a registered dout
//always @(posedge clk) begin
//   if (reset)
//      dout <= 'h0;
//   else if (rd_en)
//      dout <= mem[rd_ptr];
//end
endmodule
 

Go to most recent revision | Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.