URL
https://opencores.org/ocsvn/rise/rise/trunk
Subversion Repositories rise
[/] [rise/] [trunk/] [vhdl/] [idmem.vhd] - Rev 110
Go to most recent revision | Compare with Previous | Blame | View Log
-------------------------------------------------------------------------------- -- This file is owned and controlled by Xilinx and must be used -- -- solely for design, simulation, implementation and creation of -- -- design files limited to Xilinx devices or technologies. Use -- -- with non-Xilinx devices or technologies is expressly prohibited -- -- and immediately terminates your license. -- -- -- -- XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" -- -- SOLELY FOR USE IN DEVELOPING PROGRAMS AND SOLUTIONS FOR -- -- XILINX DEVICES. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION -- -- AS ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION -- -- OR STANDARD, XILINX IS MAKING NO REPRESENTATION THAT THIS -- -- IMPLEMENTATION IS FREE FROM ANY CLAIMS OF INFRINGEMENT, -- -- AND YOU ARE RESPONSIBLE FOR OBTAINING ANY RIGHTS YOU MAY REQUIRE -- -- FOR YOUR IMPLEMENTATION. XILINX EXPRESSLY DISCLAIMS ANY -- -- WARRANTY WHATSOEVER WITH RESPECT TO THE ADEQUACY OF THE -- -- IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY WARRANTIES OR -- -- REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM CLAIMS OF -- -- INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS -- -- FOR A PARTICULAR PURPOSE. -- -- -- -- Xilinx products are not intended for use in life support -- -- appliances, devices, or systems. Use in such applications are -- -- expressly prohibited. -- -- -- -- (c) Copyright 1995-2005 Xilinx, Inc. -- -- All rights reserved. -- -------------------------------------------------------------------------------- -- You must compile the wrapper file idmem.vhd when simulating -- the core, idmem. When compiling the wrapper file, be sure to -- reference the XilinxCoreLib VHDL simulation library. For detailed -- instructions, please refer to the "CORE Generator Help". -- The synopsys directives "translate_off/translate_on" specified -- below are supported by XST, FPGA Compiler II, Mentor Graphics and Synplicity -- synthesis tools. Ensure they are correct for your synthesis tool(s). library ieee; use ieee.std_logic_1164.all; -- synopsys translate_off library XilinxCoreLib; -- synopsys translate_on entity idmem is port ( addr : in std_logic_vector(11 downto 0); clk : in std_logic; din : in std_logic_vector(15 downto 0); dout : out std_logic_vector(15 downto 0); sinit : in std_logic; we : in std_logic); end idmem; architecture idmem_a of idmem is -- synopsys translate_off component wrapped_idmem port ( addr : in std_logic_vector(11 downto 0); clk : in std_logic; din : in std_logic_vector(15 downto 0); dout : out std_logic_vector(15 downto 0); sinit : in std_logic; we : in std_logic); end component; -- Configuration specification for all : wrapped_idmem use entity XilinxCoreLib.blkmemsp_v6_2(behavioral) generic map( c_sinit_value => "0", c_has_en => 0, c_reg_inputs => 0, c_yclk_is_rising => 1, c_ysinit_is_high => 0, c_ywe_is_high => 1, c_yprimitive_type => "8kx2", c_ytop_addr => "1024", c_yhierarchy => "hierarchy1", c_has_limit_data_pitch => 0, c_has_rdy => 0, c_write_mode => 0, c_width => 16, c_yuse_single_primitive => 0, c_has_nd => 0, c_has_we => 1, c_enable_rlocs => 0, c_has_rfd => 0, c_has_din => 1, c_ybottom_addr => "0", c_pipe_stages => 0, c_yen_is_high => 1, c_depth => 4096, c_has_default_data => 0, c_limit_data_pitch => 18, c_has_sinit => 1, c_mem_init_file => "idmem.mif", c_yydisable_warnings => 1, c_default_data => "0", c_ymake_bmm => 0, c_addr_width => 12); -- synopsys translate_on begin -- synopsys translate_off U0 : wrapped_idmem port map ( addr => addr, clk => clk, din => din, dout => dout, sinit => sinit, we => we); -- synopsys translate_on end idmem_a;
Go to most recent revision | Compare with Previous | Blame | View Log