OpenCores
URL https://opencores.org/ocsvn/rtf65002/rtf65002/trunk

Subversion Repositories rtf65002

[/] [rtf65002/] [trunk/] [software/] [asm/] [t65002d.asm] - Rev 11

Go to most recent revision | Compare with Previous | Blame | View Log

UART            EQU             $CF00
XMIT_FUL        EQU             8

        cpu     rtf65002
        org $0FFFFE000          ; 8kB ROM
start
        sei
        lda     #0x01                   ; turn on instruction cache
        trs     r1,cc                   ; transfer to cache control reg
        ldx     #$1000                  ; set stack pointer to word address $1000
        txs
        emm                                     ; switch to emulation mode
;------------------------------------------------------------------------------
; 65C02 testing
;------------------------------------------------------------------------------
        cpu     W65C02                  ; tell assembler to use 6502 tables
        ldx     #$FF
        txs
        jsr             putmsg
        db              "C02 Testing Processor", 13, 10, 0
        bra             braok8
        jsr             putmsg
        db              "BRA:F", 13, 10, 0
braok8
        brl             brlok8
        jsr             putmsg
        db              "BRL:F", 13, 10, 0
brlok8
        sec
        bcs             bcsok8
        jsr             putmsg
        db              "BCS:F", 13, 10, 0
bcsok8
        clc
        bcc             bccok8
        jsr             putmsg
        db              "BCC:F", 13, 10, 0
bccok8
        ld              r1,#$00
        beq             beqok8
        jsr             putmsg
        db              "BEQ:F", 13, 10, 0
beqok8
        ld              r1,#$80000000
        bne             bneok8
        jsr             putmsg
        db              "BNE:F", 13, 10, 0
bneok8
        or              r1,r1,#$00
        bmi             bmiok8
        jsr             putmsg
        db              "BMI:F", 13, 10, 0
bmiok8
        eor             r1,r1,#$80000000
        bpl             bplok8
        jsr             putmsg
        db              "BPL:F", 13, 10, 0
bplok8
        ld              r1,#$7fffffff
        add             r1,r1,#$1               ; should give signed overflow
        bvs             bvsok8
        jsr             putmsg
        db              "BVS:F", 13, 10, 0
bvsok8
        clv
        bvc             bvcok
        jsr             putmsg
        db              "BVC:F", 13, 10, 0
bvcok8

;--------------------------------------------------------------------------------------
; Native mode tests
;--------------------------------------------------------------------------------------

        nat                                     ; switch to native mode
        cpu             rtf65002
        jsr             putmsg3
        db              "65k Testing Processor", 13, 10, 0

;- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 
; First thing to test is branches. If you can't branch reliably
; then the validity of the remaining tests are in question.
; Test branches and also simultaneously some other simple
; instructions.
;- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 

        sei

        bra             braok
        jsr             putmsg3
        db              "BRA:F", 13, 10, 0
braok
        brl             brlok
        jsr             putmsg3
        db              "BRL:F", 13, 10, 0
brlok
        sec
        bcs             bcsok
        jsr             putmsg3
        db              "BCS:F", 13, 10, 0
bcsok
        clc
        bcc             bccok
        jsr             putmsg3
        db              "BCC:F", 13, 10, 0
bccok
        ld              r1,#$00
        beq             beqok
        jsr             putmsg3
        db              "BEQ:F", 13, 10, 0
beqok
        ld              r1,#$80000000
        bne             bneok
        jsr             putmsg3
        db              "BNE:F", 13, 10, 0
bneok
        or              r1,r1,#$00
        bmi             bmiok
        jsr             putmsg3
        db              "BMI:F", 13, 10, 0
bmiok
        eor             r1,r1,#$80000000
        bpl             bplok
        jsr             putmsg3
        db              "BPL:F", 13, 10, 0
bplok
        ld              r1,#$7fffffff
        add             r1,r1,#$1               ; should give signed overflow
        bvs             bvsok
        jsr             putmsg3
        db              "BVS:F", 13, 10, 0
bvsok
        clv
        bvc             bvcok
        jsr             putmsg3
        db              "BVC:F", 13, 10, 0
bvcok

;- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 
; Compare Instructions
;- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 

        jsr             putmsg3
        db              "test cmp/cpx/cpy", 13, 10, 0

        ld              r1,#27                  ; bit 7 = 0
        clc
        cmp             r1,#27
        bcs             cmperr
        bne             cmperr
        bmi             cmperr
        lda             #$A1000000
        cmp             r1,#20000000
        bpl             cmperr          ; should be neg.
        sec
        lda             #10
        cmp             r1,#20                  ; should be a borrow here
        bcc             cmperr
        clv
        lda             #$80000000              ; -128 - 32 = -160 should overflow
        cmp             r1,#$20000000           ; compare doesn't affect overflow
        bvs             cmperr
        bvc             cmpok

cmperr
        jsr             putmsg
        db              "CMP:F", 13, 10, 0

cmpok
        ldx             #27
        clc
        cpx             #27
        bcs             cpxerr
        bne             cpxerr
        bmi             cpxerr
        ldx             #$A1000000
        cpx             #20000000
        bpl             cpxerr
        ldx             #10
        cpx             #20                     ; should be a borrow here
        bcc             cpxerr
        clv
        ldx             #$80000000              ; -128 - 32 = -160 should overflow
        cpx             #$20000000              ; but cpx shouldn't change overflow
        bvs             cpxerr          
        bvc             cpxok

cpxerr
        jsr             putmsg
        db              "CPX:F", 13, 10, 0

cpxok
        ldy             #27
        clc
        cpy             #27
        bcs             cpyerr
        bne             cpyerr
        bmi             cpyerr
        ldy             #$B0000000
        cpy             #20000000
        bpl             cpyerr
        ldy             #10
        cpy             #20                     ; should be a borrow here
        bcc             cpyerr
        clv
        ldy             #$80000000              ; -128 - 32 = -160 should overflow
        cpy             #$20000000              ; but cpy shouldn't change overflow
        bvs             cpyerr          
        bvc             cpyok

cpyerr
        jsr             putmsg
        db              "CPY:F", 13, 10, 0

cpyok

;- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 
; Accumulator ops
;- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 

        jsr             putmsg
        db              "Test Acc ops", 13, 10, 0
; OR
        clv
        clc
        lda             #0
        or              r1,r1,#0
        bne             oraerr
        bvs             oraerr
        bmi             oraerr
        bcs             oraerr
        sec
        or              r1,r1,#0
        bcc             oraerr
        or              r1,r1,#$55
        beq             oraerr
        cmp             r1,#$55
        bne             oraerr
        or              r1,r1,#$aa
        cmp             r1,#$ff
        bne             oraerr
        beq             oraok
        
oraerr
        jsr             putmsg
        db              "ORA:F", 13, 10, 0

oraok
; SUB
        lda             #27                     ; bit 7 = 0
        sec
        sub             r1,r1,#27
        bcs             sbcerr1
        bne             sbcerr3
        bmi             sbcerr2
        bvs             sbcerr4
        lda             #$A1000000
        sub             r1,r1,#$20000000
        bpl             sbcerr2         ; should be neg.
        cmp             r1,#$81000000
        bne             sbcerr3
        sec
        lda             #10
        sub             r1,r1,#20                       ; should be a borrow here
        bcc             sbcerr1
        clv
        lda             #$80000000              ; -128 - 32 = -160 should overflow
        sub             r1,r1,#$20000000                ; 
        bvc             sbcerr4
        bvs             sbcok

sbcerr
        bsr             putmsg
        db              "SBC:F", 13, 10, 0
        jmp             sbcok

sbcerr1
        bsr             putmsg
        db              "SBC:C", 13, 10, 0
        jmp             sbcok

sbcerr2
        jsr             putmsg
        db              "SBC2:N", 13, 10, 0
        jmp             sbcok

sbcerr3
        jsr             putmsg
        db              "SBC3:Z", 13, 10, 0
        jmp             sbcok

sbcerr4
        jsr             putmsg
        db              "SBC:V", 13, 10, 0
        jmp             sbcok

sbcok


; BIT / AND

        clv
        lda             #$ffFFFFFF
        bit             r1,n5555
        bvc             biterr
        bmi             biterr
        bit             r1,nAAAA
        bvs             biterr
        bpl             biterr
        bmi             bitok

biterr
        jsr             putmsg
        db              "BIT:F", 13, 10, 0

bitok

; PLP

        lda             #$DFFFFFFF      ; leave em bit clear
        pha
        plp
        bpl     plperr
        bvc             plperr
        bne             plperr
        bcc             plperr
        bcs             plpok

plperr
        jsr             putmsg
        db              "PLP:F", 13, 10, 0

plpok

;- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 
; Load
;- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 

        jsr             putmsg
        db              "Test lda/ldx/ldy", 13, 10, 0
        
; lda

        clc
        lda             #0
        bne             ldaerr
        bmi             ldaerr
        bcs             ldaerr
        lda             #$80000000
        beq             ldaerr
        bpl             ldaerr

        lda             #$00
        st              r1,$800
        bne             ldaerr
        bmi             ldaerr
        bcs             ldaerr
        
        lda             #-1
        lda             $800
        bne             ldaerr
        bmi             ldaerr
        bcs             ldaerr
        
        cmp             r1,#0
        bne             ldaerr
        
        sec
        lda             #-1
        st              r1,$800
        beq             ldaerr
        bpl             ldaerr
        bcc             ldaerr
        
        lda             #0
        lda             $800
        beq             ldaerr
        bpl             ldaerr
        bcc             ldaerr
        
        cmp             r1,#-1
        beq             ldaok

ldaerr
        jsr             putmsg
        db              "LDA:F", 13, 10, 0

ldaok


; ldx

        clc
        lda             #$80000000              ; z = 0, n = 1
        ldx             #0
        bcs             ldxerr
        bne             ldxerr
        bmi             ldxerr

        stx             $800
        bne             ldxerr
        bmi             ldxerr
        bcs             ldxerr
        
        ldx             #-1
        ldx             $800
        bne             ldxerr
        bmi             ldxerr
        bcs             ldxerr
        
        cpx             #0
        bne             ldxerr
        
        sec
        ldx             #-1
        stx             $800
        beq             ldxerr
        bpl             ldxerr
        bcc             ldxerr
        
        ldx             #0
        ldx             $800
        beq             ldxerr
        bpl             ldxerr
        bcc             ldxerr
        
        cpx             #-1
        beq             ldxok

ldxerr
        jsr             putmsg
        db              "LDX:F", 13, 10, 0


; ldy

ldxok
        clc
        lda             #$80000000              ; z = 0, n = 1
        ldy             #0
        bcs             ldyerr
        bne             ldyerr
        bmi             ldyerr

        sty             $800
        bne             ldyerr
        bmi             ldyerr
        bcs             ldyerr
        
        ldy             #-1
        ldy             $800
        bne             ldyerr
        bmi             ldyerr
        bcs             ldyerr
        
        cpy             #0
        bne             ldyerr
        
        sec
        ldy             #-1
        sty             $800
        beq             ldyerr
        bpl             ldyerr
        bcc             ldyerr
        
        ldy             #0
        ldy             $800
        beq             ldyerr
        bpl             ldyerr
        bcc             ldyerr
        
        cpy             #-1
        beq             ldyok

ldyerr
        jsr             putmsg
        db              "LDY:F", 13, 10, 0

ldyok
;- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 
; Test register transfers
;- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 

        jsr             putmsg
        db              "Test tax/tay/txa/tya/tsx/txs", 13, 10, 0
        
; tax

        clc
        lda             #0
        ldx             #$80000000              ; z = 0, n = 1
        tax
        bcs             taxerr
        bmi             taxerr
        bne             taxerr
        
        txa
        bne             taxerr

        lda             #-1
        sec
        ldx             #0
        tax
        bcc             taxerr
        bpl             taxerr
        beq             taxerr
        
        txa
        cmp             r1,#-1
        beq             taxok

taxerr
        jsr             putmsg
        db              "TAX:F", 13, 10, 0
taxok

; tay

        clc
        lda             #0
        ldy             #$80000000                      ; z = 0, n = 1
        tay
        bcs             tayerr
        bmi             tayerr
        bne             tayerr
        
        tya
        bne             tayerr

        lda             #-1
        sec
        ldy             #0
        tay
        bcc             tayerr
        bpl             tayerr
        beq             tayerr
        
        tya
        cmp             r1,#-1
        beq             tayok

tayerr
        jsr             putmsg
        db              "TAY:F", 13, 10, 0
tayok


; txs

        ldx             #15
        txs
        ldx             #87
        tsx
        cpx             #15
        beq             txsok
        ldx             #$1000
        txs
        jsr             putmsg
        db              "TSX:F", 13, 10, 0
txsok
        ldx             #87
        txa
        cmp             r1,#87
        beq             txaok
        jsr             putmsg
        db              "TXA:F", 13, 10, 0
txaok
        tay
        cpy             #87
        beq             tayok1
        jsr             putmsg
        db              "TAY:F", 13, 10, 0
tayok1
        tya
        beq             tyaerr
        bmi             tyaerr
        cmp             r1,#87
        beq             tyaok
tyaerr
        jsr             putmsg
        db              "TYA:F", 13, 10, 0
tyaok

;- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 
; Increment / Decrement
;- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 

        jsr             putmsg
        db              "Test inx/dex/iny/dey/ina/dea/inc/dec", 13, 10, 0

        ldx             #$FFFFFFFE
        clc
        lda             #0
        inx
        bcs             inxerr
        beq             inxerr
        bpl             inxerr
        
        cpx             #$ffFFFFFF
        bne             inxerr
        
        sec
        lda             #$80
        inx
        bcc             inxerr
        bne             inxerr
        bmi             inxerr
        
        cpx             #0
        bne             inxerr
        
        clc
;inxl1                          ; test loop
;       inx
;       bcs             inxerr
;       bne             inxl1
        
        sec
;inxl2
;       inx
;       bcc             inxerr
;       bne             inxl2
        
        beq             inxok
        
inxerr
        jsr             putmsg
        db              "INX:F", 13, 10, 0

inxok

;       dex

        ldx             #2
        clc
        lda             #0
        dex
        bcs             dexerr
        beq             dexerr
        bmi             dexerr
        
        cpx             #1
        bne             dexerr
        
        sec
        lda             #$80
        dex
        bcc             dexerr
        bne             dexerr
        bmi             dexerr
        
        cpx             #0
        bne             dexerr
        
        lda             #0
        dex
        beq             dexerr
        bpl             dexerr
        
        cpx             #$ffffffff
        bne             dexerr
        
        clc
;dexl1
;       dex
;       bcs             dexerr
;       bne             dexl1
        
;       sec
dexl2
;       dex
;       bcc             dexerr
;       bne             dexl2
        
        beq             dexok
        
dexerr
        jsr             putmsg
        db              "DEX:F", 13, 10, 0
        
dexok

; iny

        ldy             #$FFFFFFFE
        clc
        add             r1,r1,#0
        iny
        bcs             inyerr
        beq             inyerr
        bpl             inyerr
        
        cpy             #$ffffffff
        bne             inyerr
        
        sec
        lda             #$80
        iny
        bcc             inyerr
        bne             inyerr
        bmi             inyerr
        
        cpy             #0
        bne             inyerr
        
        clc
inyl1                           ; test loop
;       iny
;       bcs             inyerr
;       bne             inyl1
        
        sec
inyl2
;       iny
;       bcc             inyerr
;       bne             inyl2
        
        beq             inyok
        
inyerr
        jsr             putmsg
        db              "INY:F", 13, 10, 0


;       dey

inyok

        ldy             #2
        clc
        lda             #0
        dey
        bcs             deyerr
        beq             deyerr
        bmi             deyerr
        
        cpy             #1
        bne             deyerr
        
        sec
        lda             #$80
        dey
        bcc             deyerr
        bne             deyerr
        bmi             deyerr
        
        cpy             #0
        bne             deyerr
        
        lda             #0
        dey
        beq             deyerr
        bpl             deyerr
        
        cpy             #$ffffffff
        bne             deyerr
        
;       clc
deyl1
;       dey
;       bcs             deyerr
;       bne             deyl1
        
;       sec
deyl2
;       dey
;       bcc             deyerr
;       bne             deyl2
        
        bra             deyok
        
deyerr
        jsr             putmsg
        db              "DEY:F", 13, 10, 0
        
deyok


        lda             #1
        ina
        cmp             r1,#2
        beq             inaok
        
        jsr             putmsg
        db              "INA:F", 13, 10, 0

inaok
        
        lda             #2
        dea
        cmp             r1,#1
        beq             deaok
        
        jsr             putmsg
        db              "DEA:F", 13, 10, 0

deaok


        stp

putmsg
putmsg3
        plx                             ; pop the return address off the stack
pm5
        lb              r1,$0,x ; load byte into accumulator
        inx
        ora             #0              ; test for end of string
        beq             pm6
        bsr             putSer
        bra             pm5
pm6
        jmp             (x)             ; return to next code byte

; put character to serial port
; test and,bne,pha,pla,sta,lda,rts

putSer
        pha                                     ; temporarily save character
ps1
        lb              r1,UART+1               ; get serial port status
        and             #XMIT_FUL       ; is it full ?
        bne             ps1                     ; If full then wait
        pla                                     ; get back the char to write
        sb              r1,UART         ; write it to the xmit register
        rts

nmirout
        rti

        align   4
n5555
        dw              $55555555
nAAAA
        dw              $AAAAAAAA
        
        dw              12
        dw              34

        org $0FFFFFFF4          ; NMI vector
        dw      nmirout

        org     $0FFFFFFF8              ; reset vector, native mode
        dw      start

Go to most recent revision | Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.