Subversion Repositories s1_core

#!/bin/bash

# Check command line parameter
if ( (test $# != 1) || ((test $1 != "-me") && (test $1 != "-se") && (test $1 != "-ee")) ) then
  echo "update_sparccore - Script to update SPARC Core sources from a fresh OpenSPARC installation";
  echo "(C) 2007 by Simply RISC";
  echo "Usage:";
  echo "      update_sparccore {-me|-se|-ee}";
  echo "where parameter refers to the S1 Core version you want to obtain in your environment:";
  echo "      -me : S1 Core Memory-less Edition (single-thread, no L1 caches)";
  echo "      -se : S1 Core Single-thread Edition (single-thread, normal 16K+8K caches)";
  echo "      -ee : S1 Core Elite Edition (four threads support, normal 16K+8K caches)";
  echo "NOTE: To run this script you MUST have the OpenSPARC T1 environment unpacked";
  echo "      and the T1_ROOT variable properly set in your S1_ROOT/sourceme file.";
  exit 1;
fi

# Set source and destination directories
SRC_DIR=$T1_ROOT/design/sys/iop
DST_DIR=$S1_ROOT/hdl/rtl/sparc_core

# Clean destination directory
rm -f $DST_DIR/*.*
rm -f $DST_DIR/include/*.*

# Copy all the Verilog files of the SPARC Core into destination directory
cp $SRC_DIR/include/*.h $DST_DIR/include
cp $SRC_DIR/srams/rtl/*.v $DST_DIR
cp $SRC_DIR/analog/bw_clk/rtl/*.v $DST_DIR
cp $SRC_DIR/analog/bw_rng/rtl/*.v $DST_DIR
find $SRC_DIR/common -name "*.v" -exec cp {} $DST_DIR \;
find $SRC_DIR/pr_macro -name "*.v" -exec cp {} $DST_DIR \;
find $SRC_DIR/sparc -name "*.v" -exec cp {} $DST_DIR \;

# Remove synthetized files -- if any
find $DST_DIR -name "*_flat.v" -exec rm -f {} \;
find $DST_DIR -name "*_flat_nc.v" -exec rm -f {} \;
find $DST_DIR -name "*_hier.v" -exec rm -f {} \;

# Remove unused files (according to liuyadong)
cd $DST_DIR
rm bw_r_l2t.v bw_r_cm16x40.v bw_r_cm16x40b.v bw_r_dcm.v bw_r_efa.v bw_r_l2d.v bw_r_l2d_32k.v \
    bw_r_l2d_rep_bot.v bw_r_l2d_rep_top.v bw_r_rf16x128d.v bw_r_rf32x108.v bw_rf_16x65.v bw_rf_16x81.v \
    bw_clk_cclk_hdr_48x.v bw_clk_cclk_hdr_64x.v bw_clk_cclk_inv_128x.v bw_clk_cclk_inv_48x.v \
    bw_clk_cclk_inv_64x.v bw_clk_cclk_inv_96x.v bw_clk_cclk_scanlasr_2x.v bw_clk_cclk_sync.v \
    bw_clk_gclk_center_3inv.v bw_clk_gclk_inv_192x.v bw_clk_gclk_inv_224x.v bw_clk_gclk_inv_288x.v \
    bw_clk_gclk_inv_r90_192x.v bw_clk_gclk_inv_r90_224x.v bw_clk_gclk_inv_r90_256x.v bw_clk_gclk_sctag_3inv.v \
    bw_clk_gl.v bw_clk_gl_fdbk.v bw_clk_gl_hz.v bw_clk_gl_rstce_rtl.v bw_clk_gl_vrt_all.v flop_rptrs_xa0.v \
    flop_rptrs_xa1.v flop_rptrs_xb0.v flop_rptrs_xb1.v flop_rptrs_xb2.v flop_rptrs_xb3.v flop_rptrs_xc0.v \
    flop_rptrs_xc1.v flop_rptrs_xc2.v flop_rptrs_xc3.v flop_rptrs_xc4.v flop_rptrs_xc5.v flop_rptrs_xc6.v \
    flop_rptrs_xc7.v bw_rng.v cluster_header_ctu.v cluster_header_dup.v cluster_header_sync.v dbl_buf.v \
    sync_pulse_synchronizer.v synchronizer_asr_dup.v ucb_bus_in.v ucb_bus_out.v ucb_flow_2buf.v \
    ucb_flow_jbi.v ucb_flow_spi.v ucb_noflow.v spc_pcx_buf.v

# Clean the files by substituting the $error System Task and applying defines with Icarus preprocessor
for file in $DST_DIR/*.v ; do
  sed -e 's/\$error/\$display/g' $file | sed -e 's/negedge rclk or rst_l/negedge rclk/g' > $DST_DIR/temp.v
  if(test $1 == "-me" || test $1 == "-se") then
    iverilog -E -D FPGA_SYN -D FPGA_SYN_1THREAD -D FPGA_SYN_NO_SPU -I $DST_DIR/include -o$file $DST_DIR/temp.v
  else
    iverilog -E -D FPGA_SYN -D FPGA_SYN_NO_SPU -I $DST_DIR/include -o$file $DST_DIR/temp.v
  fi
  sed -e 's/\* ========== Copyright Header Begin/\/\* ========== Copyright Header Begin/g' $file | sed -e 's/if (\$time > (4\* ))/if(\$time>2)/g' > $DST_DIR/temp.v
  mv -f $DST_DIR/temp.v $file
done

# Disable L1 Instruction and Data Caches
if(test $1 == "-me") then
  cp -f $S1_ROOT/tools/src/bw_r_dcd.v $DST_DIR
  cp -f $S1_ROOT/tools/src/bw_r_icd.v $DST_DIR
  cp -f $S1_ROOT/tools/src/bw_r_idct.v $DST_DIR
fi

# Hack the SPARC Core to add the external stall input from the bridge
sed -e 's/pcx_spc_grant_px,/pcx_spc_grant_px, wbm_spc_stallreq,/g' $DST_DIR/sparc.v |
  sed -e 's/pcx_spc_grant_px;/pcx_spc_grant_px; input wbm_spc_stallreq;/g' |
  sed -e 's/sparc_ifu ifu(/sparc_ifu ifu( .wbm_spc_stallreq(wbm_spc_stallreq),/g' > $DST_DIR/sparc_TMP.v
mv -f $DST_DIR/sparc_TMP.v $DST_DIR/sparc.v
sed -e 's/ffu_ifu_stallreq,/ffu_ifu_stallreq, wbm_spc_stallreq,/g' $DST_DIR/sparc_ifu.v |
  sed -e 's/ffu_ifu_stallreq;/ffu_ifu_stallreq; input wbm_spc_stallreq;/g' |
  sed -e 's/sparc_ifu_fcl fcl(/sparc_ifu_fcl fcl( .wbm_spc_stallreq(wbm_spc_stallreq),/g' > $DST_DIR/sparc_ifu_TMP.v
mv -f $DST_DIR/sparc_ifu_TMP.v $DST_DIR/sparc_ifu.v
sed -e 's/ffu_ifu_stallreq,/ffu_ifu_stallreq, wbm_spc_stallreq,/g' $DST_DIR/sparc_ifu_fcl.v |
  sed -e 's/assign all_stallreq = ifq_fcl_stallreq/assign all_stallreq = ifq_fcl_stallreq | wbm_spc_stallreq/g' > $DST_DIR/sparc_ifu_fcl_TMP.v
mv -f $DST_DIR/sparc_ifu_fcl_TMP.v $DST_DIR/sparc_ifu_fcl.v

# Copy also behavioral libraries used for RTL simulations
DST_DIR=$S1_ROOT/hdl/behav/sparc_libs
rm -f $DST_DIR/*.*
cp $SRC_DIR/../../../lib/m1/m1.behV $DST_DIR/m1_lib.v
cp $SRC_DIR/../../../lib/u1/u1.behV $DST_DIR/u1_lib.v