URL
https://opencores.org/ocsvn/s6soc/s6soc/trunk
Subversion Repositories s6soc
[/] [s6soc/] [trunk/] [sw/] [zipos/] [cmodram.ld] - Rev 45
Compare with Previous | Blame | View Log
/*******************************************************************************
*
* Filename: cmodram.ld
*
* Project: Cmod S6 ZipCPU demonstration
*
* Purpose: This script provides a description of the Cmod S6 Zip CPU
* build for the purposes of where to place memory when linking.
*
* This script is different from the cmod.ld script in that this script
* places specific pieces of code into RAM rather than FLASH. This is to
* speed up those particular pieces of code. This script also depends
* upon a bootloader to load the RAM sections into RAM with their initial
* values.
*
* Creator: Dan Gisselquist, Ph.D.
* Gisselquist Technology, LLC
*
********************************************************************************
*
* Copyright (C) 2016, Gisselquist Technology, LLC
*
* This program is free software (firmware): you can redistribute it and/or
* modify it under the terms of the GNU General Public License as published
* by the Free Software Foundation, either version 3 of the License, or (at
* your option) any later version.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTIBILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* for more details.
*
* License: GPL, v3, as defined and found on www.gnu.org,
* http://www.gnu.org/licenses/gpl.html
*
*
*******************************************************************************/
ENTRY(_start)
MEMORY
{
blkram (wx) : ORIGIN = 0x0004000, LENGTH = 0x0004000
flash (rx) : ORIGIN = 0x1000000, LENGTH = 0x1000000
}
_flash = ORIGIN(flash);
_blkram = ORIGIN(blkram);
_sdram = 0;
_top_of_stack = ORIGIN(blkram) + LENGTH(blkram) - 4;
_sdram_image_start = 0;
_sdram_image_end = 0;
SECTIONS
{
.rocode 0x1200000 : ALIGN(4) {
_boot_address = .;
*(.start) *(.boot)
obj-zip/bootloader.o(.text)
obj-zip/ksetup.o(.text)
obj-zip/pipesetup.o(.text)
obj-zip/taskp.o(.text)
obj-zip/keypad.o(.text*)
obj-zip/display.o(.text*)
obj-zip/rtcsim.o(.text*)
obj-zip/doorbell.o(.text*)
*(.rodata*)
*(.strings*)
__rocode_alignment = (. + 3) & ~ 3;
. = __rocode_alignment;
} > flash
_kernel_image_start = . ;
.ramcode : ALIGN_WITH_INPUT {
obj-zip/kernel.o(.text*)
obj-zip/syspipe.o(.text*)
} > blkram AT> flash
.data : ALIGN_WITH_INPUT {
*(.kernel*)
*(.fixdata*)
*(.data*)
*(COMMON*)
_kernel_image_end = . ;
}> blkram AT> flash
_blkram_image_end = . ;
.bss : ALIGN_WITH_INPUT {
*(.bss*)
_bss_image_end = . ;
} > blkram
_top_of_heap = .;
}