OpenCores
URL https://opencores.org/ocsvn/scarts/scarts/trunk

Subversion Repositories scarts

[/] [scarts/] [trunk/] [toolchain/] [scarts-gcc/] [gcc-4.1.1/] [gcc/] [ada/] [s-osprim-mingw.adb] - Rev 12

Compare with Previous | Blame | View Log

------------------------------------------------------------------------------
--                                                                          --
--                 GNAT RUN-TIME LIBRARY (GNARL) COMPONENTS                 --
--                                                                          --
--                  S Y S T E M . O S _ P R I M I T I V E S                 --
--                                                                          --
--                                  B o d y                                 --
--                                                                          --
--          Copyright (C) 1998-2005 Free Software Foundation, Inc.          --
--                                                                          --
-- GNARL is free software; you can  redistribute it  and/or modify it under --
-- terms of the  GNU General Public License as published  by the Free Soft- --
-- ware  Foundation;  either version 2,  or (at your option) any later ver- --
-- sion. GNARL is distributed in the hope that it will be useful, but WITH- --
-- OUT ANY WARRANTY;  without even the  implied warranty of MERCHANTABILITY --
-- or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License --
-- for  more details.  You should have  received  a copy of the GNU General --
-- Public License  distributed with GNARL; see file COPYING.  If not, write --
-- to  the  Free Software Foundation,  51  Franklin  Street,  Fifth  Floor, --
-- Boston, MA 02110-1301, USA.                                              --
--                                                                          --
-- As a special exception,  if other files  instantiate  generics from this --
-- unit, or you link  this unit with other files  to produce an executable, --
-- this  unit  does not  by itself cause  the resulting  executable  to  be --
-- covered  by the  GNU  General  Public  License.  This exception does not --
-- however invalidate  any other reasons why  the executable file  might be --
-- covered by the  GNU Public License.                                      --
--                                                                          --
-- GNARL was developed by the GNARL team at Florida State University.       --
-- Extensive contributions were provided by Ada Core Technologies, Inc.     --
--                                                                          --
------------------------------------------------------------------------------
 
--  This is the NT version of this package
 
with Interfaces.C;
 
package body System.OS_Primitives is
 
   ---------------------------
   -- Win32 API Definitions --
   ---------------------------
 
   --  These definitions are copied from System.OS_Interface because we do not
   --  want to depend on gnarl here.
 
   type DWORD is new Interfaces.C.unsigned_long;
 
   type LARGE_INTEGER is delta 1.0 range -2.0**63 .. 2.0**63 - 1.0;
 
   type BOOL is new Boolean;
   for BOOL'Size use Interfaces.C.unsigned_long'Size;
 
   procedure GetSystemTimeAsFileTime (lpFileTime : access Long_Long_Integer);
   pragma Import (Stdcall, GetSystemTimeAsFileTime, "GetSystemTimeAsFileTime");
 
   function QueryPerformanceCounter
     (lpPerformanceCount : access LARGE_INTEGER) return BOOL;
   pragma Import
     (Stdcall, QueryPerformanceCounter, "QueryPerformanceCounter");
 
   function QueryPerformanceFrequency
     (lpFrequency : access LARGE_INTEGER) return BOOL;
   pragma Import
     (Stdcall, QueryPerformanceFrequency, "QueryPerformanceFrequency");
 
   procedure Sleep (dwMilliseconds : DWORD);
   pragma Import (Stdcall, Sleep, External_Name => "Sleep");
 
   ----------------------------------------
   -- Data for the high resolution clock --
   ----------------------------------------
 
   --  Declare some pointers to access multi-word data above. This is needed
   --  to workaround a limitation in the GNU/Linker auto-import feature used
   --  to build the GNAT runtime DLLs. In fact the Clock and Monotonic_Clock
   --  routines are inlined and they are using some multi-word variables.
   --  GNU/Linker will fail to auto-import those variables when building
   --  libgnarl.dll. The indirection level introduced here has no measurable
   --  penalties.
   --
   --  Note that access variables below must not be declared as constant
   --  otherwise the compiler optimization will remove this indirect access.
 
   type DA is access all Duration;
   --  Use to have indirect access to multi-word variables
 
   type LIA is access all LARGE_INTEGER;
   --  Use to have indirect access to multi-word variables
 
   type LLIA is access all Long_Long_Integer;
   --  Use to have indirect access to multi-word variables
 
   Tick_Frequency : aliased LARGE_INTEGER;
   TFA : constant LIA := Tick_Frequency'Access;
   --  Holds frequency of high-performance counter used by Clock
   --  Windows NT uses a 1_193_182 Hz counter on PCs.
 
   Base_Ticks : aliased LARGE_INTEGER;
   BTA : constant LIA := Base_Ticks'Access;
   --  Holds the Tick count for the base time.
 
   Base_Monotonic_Ticks : aliased LARGE_INTEGER;
   BMTA : constant LIA := Base_Monotonic_Ticks'Access;
   --  Holds the Tick count for the base monotonic time
 
   Base_Clock : aliased Duration;
   BCA : constant DA := Base_Clock'Access;
   --  Holds the current clock for the standard clock's base time
 
   Base_Monotonic_Clock : aliased Duration;
   BMCA : constant DA := Base_Monotonic_Clock'Access;
   --  Holds the current clock for monotonic clock's base time
 
   Base_Time : aliased Long_Long_Integer;
   BTiA : constant LLIA := Base_Time'Access;
   --  Holds the base time used to check for system time change, used with
   --  the standard clock.
 
   procedure Get_Base_Time;
   --  Retrieve the base time and base ticks. These values will be used by
   --  clock to compute the current time by adding to it a fraction of the
   --  performance counter. This is for the implementation of a
   --  high-resolution clock. Note that this routine does not change the base
   --  monotonic values used by the monotonic clock.
 
   -----------
   -- Clock --
   -----------
 
   --  This implementation of clock provides high resolution timer values
   --  using QueryPerformanceCounter. This call return a 64 bits values (based
   --  on the 8253 16 bits counter). This counter is updated every 1/1_193_182
   --  times per seconds. The call to QueryPerformanceCounter takes 6
   --  microsecs to complete.
 
   function Clock return Duration is
      Max_Shift            : constant Duration        := 2.0;
      Hundreds_Nano_In_Sec : constant Long_Long_Float := 1.0E7;
      Current_Ticks        : aliased LARGE_INTEGER;
      Elap_Secs_Tick       : Duration;
      Elap_Secs_Sys        : Duration;
      Now                  : aliased Long_Long_Integer;
 
   begin
      if not QueryPerformanceCounter (Current_Ticks'Access) then
         return 0.0;
      end if;
 
      GetSystemTimeAsFileTime (Now'Access);
 
      Elap_Secs_Sys :=
        Duration (Long_Long_Float (abs (Now - BTiA.all)) /
                    Hundreds_Nano_In_Sec);
 
      Elap_Secs_Tick :=
        Duration (Long_Long_Float (Current_Ticks - BTA.all) /
                  Long_Long_Float (TFA.all));
 
      --  If we have a shift of more than Max_Shift seconds we resynchonize the
      --  Clock. This is probably due to a manual Clock adjustment, an DST
      --  adjustment or an NTP synchronisation. And we want to adjust the
      --  time for this system (non-monotonic) clock.
 
      if abs (Elap_Secs_Sys - Elap_Secs_Tick) > Max_Shift then
         Get_Base_Time;
 
         Elap_Secs_Tick :=
           Duration (Long_Long_Float (Current_Ticks - BTA.all) /
                     Long_Long_Float (TFA.all));
      end if;
 
      return BCA.all + Elap_Secs_Tick;
   end Clock;
 
   -------------------
   -- Get_Base_Time --
   -------------------
 
   procedure Get_Base_Time is
      --  The resolution for GetSystemTime is 1 millisecond.
 
      --  The time to get both base times should take less than 1 millisecond.
      --  Therefore, the elapsed time reported by GetSystemTime between both
      --  actions should be null.
 
      Max_Elapsed    : constant := 0;
 
      Test_Now       : aliased Long_Long_Integer;
 
      epoch_1970     : constant := 16#19D_B1DE_D53E_8000#; -- win32 UTC epoch
      system_time_ns : constant := 100;                    -- 100 ns per tick
      Sec_Unit       : constant := 10#1#E9;
 
   begin
      --  Here we must be sure that both of these calls are done in a short
      --  amount of time. Both are base time and should in theory be taken
      --  at the very same time.
 
      loop
         GetSystemTimeAsFileTime (Base_Time'Access);
 
         if not QueryPerformanceCounter (Base_Ticks'Access) then
            pragma Assert
              (Standard.False,
               "Could not query high performance counter in Clock");
            null;
         end if;
 
         GetSystemTimeAsFileTime (Test_Now'Access);
 
         exit when Test_Now - Base_Time = Max_Elapsed;
      end loop;
 
      Base_Clock := Duration
        (Long_Long_Float ((Base_Time - epoch_1970) * system_time_ns) /
         Long_Long_Float (Sec_Unit));
   end Get_Base_Time;
 
   ---------------------
   -- Monotonic_Clock --
   ---------------------
 
   function Monotonic_Clock return Duration is
      Current_Ticks  : aliased LARGE_INTEGER;
      Elap_Secs_Tick : Duration;
   begin
      if not QueryPerformanceCounter (Current_Ticks'Access) then
         return 0.0;
      end if;
 
      Elap_Secs_Tick :=
        Duration (Long_Long_Float (Current_Ticks - BMTA.all) /
                  Long_Long_Float (TFA.all));
 
      return BMCA.all + Elap_Secs_Tick;
   end Monotonic_Clock;
 
   -----------------
   -- Timed_Delay --
   -----------------
 
   procedure Timed_Delay (Time : Duration; Mode : Integer) is
      Rel_Time   : Duration;
      Abs_Time   : Duration;
      Check_Time : Duration := Monotonic_Clock;
 
   begin
      if Mode = Relative then
         Rel_Time := Time;
         Abs_Time := Time + Check_Time;
      else
         Rel_Time := Time - Check_Time;
         Abs_Time := Time;
      end if;
 
      if Rel_Time > 0.0 then
         loop
            Sleep (DWORD (Rel_Time * 1000.0));
            Check_Time := Monotonic_Clock;
 
            exit when Abs_Time <= Check_Time;
 
            Rel_Time := Abs_Time - Check_Time;
         end loop;
      end if;
   end Timed_Delay;
 
   ----------------
   -- Initialize --
   ----------------
 
   Initialized : Boolean := False;
 
   procedure Initialize is
   begin
      if Initialized then
         return;
      end if;
 
      Initialized := True;
 
      --  Get starting time as base
 
      if not QueryPerformanceFrequency (Tick_Frequency'Access) then
         raise Program_Error
           with "cannot get high performance counter frequency";
      end if;
 
      Get_Base_Time;
 
      --  Keep base clock and ticks for the monotonic clock. These values
      --  should never be changed to ensure proper behavior of the monotonic
      --  clock.
 
      Base_Monotonic_Clock := Base_Clock;
      Base_Monotonic_Ticks := Base_Ticks;
   end Initialize;
 
end System.OS_Primitives;
 

Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2025 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.