URL
https://opencores.org/ocsvn/scarts/scarts/trunk
Subversion Repositories scarts
[/] [scarts/] [trunk/] [toolchain/] [scarts-gcc/] [gcc-4.1.1/] [gcc/] [config/] [v850/] [v850.md] - Rev 20
Go to most recent revision | Compare with Previous | Blame | View Log
;; GCC machine description for NEC V850
;; Copyright (C) 1996, 1997, 1998, 1999, 2002, 2004, 2005
;; Free Software Foundation, Inc.
;; Contributed by Jeff Law (law@cygnus.com).
;; This file is part of GCC.
;; GCC is free software; you can redistribute it and/or modify
;; it under the terms of the GNU General Public License as published by
;; the Free Software Foundation; either version 2, or (at your option)
;; any later version.
;; GCC is distributed in the hope that it will be useful,
;; but WITHOUT ANY WARRANTY; without even the implied warranty of
;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
;; GNU General Public License for more details.
;; You should have received a copy of the GNU General Public License
;; along with GCC; see the file COPYING. If not, write to
;; the Free Software Foundation, 51 Franklin Street, Fifth Floor,
;; Boston, MA 02110-1301, USA.
;; The original PO technology requires these to be ordered by speed,
;; so that assigner will pick the fastest.
;; See file "rtl.def" for documentation on define_insn, match_*, et. al.
;; The V851 manual states that the instruction address space is 16M;
;; the various branch/call instructions only have a 22bit offset (4M range).
;;
;; One day we'll probably need to handle calls to targets more than 4M
;; away.
;; The size of instructions in bytes.
(define_attr "length" ""
(const_int 4))
(define_attr "long_calls" "yes,no"
(const (if_then_else (symbol_ref "TARGET_LONG_CALLS")
(const_string "yes")
(const_string "no"))))
;; Types of instructions (for scheduling purposes).
(define_attr "type" "load,mult,other"
(const_string "other"))
;; Condition code settings.
;; none - insn does not affect cc
;; none_0hit - insn does not affect cc but it does modify operand 0
;; This attribute is used to keep track of when operand 0 changes.
;; See the description of NOTICE_UPDATE_CC for more info.
;; set_znv - sets z,n,v to usable values; c is unknown.
;; set_zn - sets z,n to usable values; v,c is unknown.
;; compare - compare instruction
;; clobber - value of cc is unknown
(define_attr "cc" "none,none_0hit,set_zn,set_znv,compare,clobber"
(const_string "clobber"))
;; Function units for the V850. As best as I can tell, there's
;; a traditional memory load/use stall as well as a stall if
;; the result of a multiply is used too early.
(define_insn_reservation "v850_other" 1
(eq_attr "type" "other")
"nothing")
(define_insn_reservation "v850_mult" 2
(eq_attr "type" "mult")
"nothing")
(define_insn_reservation "v850_memory" 2
(eq_attr "type" "load")
"nothing")
(include "predicates.md")
;; ----------------------------------------------------------------------
;; MOVE INSTRUCTIONS
;; ----------------------------------------------------------------------
;; movqi
(define_expand "movqi"
[(set (match_operand:QI 0 "general_operand" "")
(match_operand:QI 1 "general_operand" ""))]
""
"
{
/* One of the ops has to be in a register or 0 */
if (!register_operand (operand0, QImode)
&& !reg_or_0_operand (operand1, QImode))
operands[1] = copy_to_mode_reg (QImode, operand1);
}")
(define_insn "*movqi_internal"
[(set (match_operand:QI 0 "general_operand" "=r,r,r,Q,r,m,m")
(match_operand:QI 1 "general_operand" "Jr,n,Q,Ir,m,r,I"))]
"register_operand (operands[0], QImode)
|| reg_or_0_operand (operands[1], QImode)"
"* return output_move_single (operands);"
[(set_attr "length" "2,4,2,2,4,4,4")
(set_attr "cc" "none_0hit,none_0hit,none_0hit,none_0hit,none_0hit,none_0hit,none_0hit")
(set_attr "type" "other,other,load,other,load,other,other")])
;; movhi
(define_expand "movhi"
[(set (match_operand:HI 0 "general_operand" "")
(match_operand:HI 1 "general_operand" ""))]
""
"
{
/* One of the ops has to be in a register or 0 */
if (!register_operand (operand0, HImode)
&& !reg_or_0_operand (operand1, HImode))
operands[1] = copy_to_mode_reg (HImode, operand1);
}")
(define_insn "*movhi_internal"
[(set (match_operand:HI 0 "general_operand" "=r,r,r,Q,r,m,m")
(match_operand:HI 1 "general_operand" "Jr,n,Q,Ir,m,r,I"))]
"register_operand (operands[0], HImode)
|| reg_or_0_operand (operands[1], HImode)"
"* return output_move_single (operands);"
[(set_attr "length" "2,4,2,2,4,4,4")
(set_attr "cc" "none_0hit,none_0hit,none_0hit,none_0hit,none_0hit,none_0hit,none_0hit")
(set_attr "type" "other,other,load,other,load,other,other")])
;; movsi and helpers
(define_insn "*movsi_high"
[(set (match_operand:SI 0 "register_operand" "=r")
(high:SI (match_operand 1 "" "")))]
""
"movhi hi(%1),%.,%0"
[(set_attr "length" "4")
(set_attr "cc" "none_0hit")
(set_attr "type" "other")])
(define_insn "*movsi_lo"
[(set (match_operand:SI 0 "register_operand" "=r")
(lo_sum:SI (match_operand:SI 1 "register_operand" "r")
(match_operand:SI 2 "immediate_operand" "i")))]
""
"movea lo(%2),%1,%0"
[(set_attr "length" "4")
(set_attr "cc" "none_0hit")
(set_attr "type" "other")])
(define_expand "movsi"
[(set (match_operand:SI 0 "general_operand" "")
(match_operand:SI 1 "general_operand" ""))]
""
"
{
/* One of the ops has to be in a register or 0 */
if (!register_operand (operand0, SImode)
&& !reg_or_0_operand (operand1, SImode))
operands[1] = copy_to_mode_reg (SImode, operand1);
/* Some constants, as well as symbolic operands
must be done with HIGH & LO_SUM patterns. */
if (CONSTANT_P (operands[1])
&& GET_CODE (operands[1]) != HIGH
&& ! TARGET_V850E
&& !special_symbolref_operand (operands[1], VOIDmode)
&& !(GET_CODE (operands[1]) == CONST_INT
&& (CONST_OK_FOR_J (INTVAL (operands[1]))
|| CONST_OK_FOR_K (INTVAL (operands[1]))
|| CONST_OK_FOR_L (INTVAL (operands[1])))))
{
rtx temp;
if (reload_in_progress || reload_completed)
temp = operands[0];
else
temp = gen_reg_rtx (SImode);
emit_insn (gen_rtx_SET (SImode, temp,
gen_rtx_HIGH (SImode, operand1)));
emit_insn (gen_rtx_SET (SImode, operand0,
gen_rtx_LO_SUM (SImode, temp, operand1)));
DONE;
}
}")
;; This is the same as the following pattern, except that it includes
;; support for arbitrary 32 bit immediates.
;; ??? This always loads addresses using hilo. If the only use of this address
;; was in a load/store, then we would get smaller code if we only loaded the
;; upper part with hi, and then put the lower part in the load/store insn.
(define_insn "*movsi_internal_v850e"
[(set (match_operand:SI 0 "general_operand" "=r,r,r,r,Q,r,r,m,m,r")
(match_operand:SI 1 "general_operand" "Jr,K,L,Q,Ir,m,R,r,I,i"))]
"TARGET_V850E
&& (register_operand (operands[0], SImode)
|| reg_or_0_operand (operands[1], SImode))"
"* return output_move_single (operands);"
[(set_attr "length" "2,4,4,2,2,4,4,4,4,6")
(set_attr "cc" "none_0hit,none_0hit,none_0hit,none_0hit,none_0hit,none_0hit,none_0hit,none_0hit,none_0hit,none_0hit")
(set_attr "type" "other,other,other,load,other,load,other,other,other,other")])
(define_insn "*movsi_internal"
[(set (match_operand:SI 0 "general_operand" "=r,r,r,r,Q,r,r,m,m")
(match_operand:SI 1 "movsi_source_operand" "Jr,K,L,Q,Ir,m,R,r,I"))]
"register_operand (operands[0], SImode)
|| reg_or_0_operand (operands[1], SImode)"
"* return output_move_single (operands);"
[(set_attr "length" "2,4,4,2,2,4,4,4,4")
(set_attr "cc" "none_0hit,none_0hit,none_0hit,none_0hit,none_0hit,none_0hit,none_0hit,none_0hit,none_0hit")
(set_attr "type" "other,other,other,load,other,load,other,other,other")])
(define_expand "movdi"
[(set (match_operand:DI 0 "general_operand" "")
(match_operand:DI 1 "general_operand" ""))]
""
"
{
/* One of the ops has to be in a register or 0 */
if (!register_operand (operand0, DImode)
&& !reg_or_0_operand (operand1, DImode))
operands[1] = copy_to_mode_reg (DImode, operand1);
}")
(define_insn "*movdi_internal"
[(set (match_operand:DI 0 "general_operand" "=r,r,r,r,r,m,m,r")
(match_operand:DI 1 "general_operand" "Jr,K,L,i,m,r,IG,iF"))]
"register_operand (operands[0], DImode)
|| reg_or_0_operand (operands[1], DImode)"
"* return output_move_double (operands);"
[(set_attr "length" "4,8,8,16,8,8,8,16")
(set_attr "cc" "none_0hit,none_0hit,none_0hit,none_0hit,none_0hit,none_0hit,none_0hit,none_0hit")
(set_attr "type" "other,other,other,other,load,other,other,other")])
(define_expand "movsf"
[(set (match_operand:SF 0 "general_operand" "")
(match_operand:SF 1 "general_operand" ""))]
""
"
{
/* One of the ops has to be in a register or 0 */
if (!register_operand (operand0, SFmode)
&& !reg_or_0_operand (operand1, SFmode))
operands[1] = copy_to_mode_reg (SFmode, operand1);
}")
(define_insn "*movsf_internal"
[(set (match_operand:SF 0 "general_operand" "=r,r,r,r,r,Q,r,m,m,r")
(match_operand:SF 1 "general_operand" "Jr,K,L,n,Q,Ir,m,r,IG,iF"))]
"register_operand (operands[0], SFmode)
|| reg_or_0_operand (operands[1], SFmode)"
"* return output_move_single (operands);"
[(set_attr "length" "2,4,4,8,2,2,4,4,4,8")
(set_attr "cc" "none_0hit,none_0hit,none_0hit,none_0hit,none_0hit,none_0hit,none_0hit,none_0hit,none_0hit,none_0hit")
(set_attr "type" "other,other,other,other,load,other,load,other,other,other")])
(define_expand "movdf"
[(set (match_operand:DF 0 "general_operand" "")
(match_operand:DF 1 "general_operand" ""))]
""
"
{
/* One of the ops has to be in a register or 0 */
if (!register_operand (operand0, DFmode)
&& !reg_or_0_operand (operand1, DFmode))
operands[1] = copy_to_mode_reg (DFmode, operand1);
}")
(define_insn "*movdf_internal"
[(set (match_operand:DF 0 "general_operand" "=r,r,r,r,r,m,m,r")
(match_operand:DF 1 "general_operand" "Jr,K,L,i,m,r,IG,iF"))]
"register_operand (operands[0], DFmode)
|| reg_or_0_operand (operands[1], DFmode)"
"* return output_move_double (operands);"
[(set_attr "length" "4,8,8,16,8,8,8,16")
(set_attr "cc" "none_0hit,none_0hit,none_0hit,none_0hit,none_0hit,none_0hit,none_0hit,none_0hit")
(set_attr "type" "other,other,other,other,load,other,other,other")])
;; ----------------------------------------------------------------------
;; TEST INSTRUCTIONS
;; ----------------------------------------------------------------------
(define_insn "*v850_tst1"
[(set (cc0) (zero_extract:SI (match_operand:QI 0 "memory_operand" "m")
(const_int 1)
(match_operand:QI 1 "const_int_operand" "n")))]
""
"tst1 %1,%0"
[(set_attr "length" "4")
(set_attr "cc" "clobber")])
;; This replaces ld.b;sar;andi with tst1;setf nz.
;; ??? The zero_extract sets the Z bit to the opposite of what one would
;; expect. This perhaps should be wrapped in a (eq: X (const_int 0)).
(define_split
[(set (match_operand:SI 0 "register_operand" "")
(zero_extract:SI (match_operand:QI 1 "memory_operand" "")
(const_int 1)
(match_operand 2 "const_int_operand" "")))]
""
[(set (cc0) (zero_extract:SI (match_dup 1)
(const_int 1)
(match_dup 2)))
(set (match_dup 0) (ne:SI (cc0) (const_int 0)))])
(define_insn "tstsi"
[(set (cc0) (match_operand:SI 0 "register_operand" "r"))]
""
"cmp %.,%0"
[(set_attr "length" "2")
(set_attr "cc" "set_znv")])
(define_insn "cmpsi"
[(set (cc0)
(compare (match_operand:SI 0 "register_operand" "r,r")
(match_operand:SI 1 "reg_or_int5_operand" "r,J")))]
""
"@
cmp %1,%0
cmp %1,%0"
[(set_attr "length" "2,2")
(set_attr "cc" "compare")])
;; ----------------------------------------------------------------------
;; ADD INSTRUCTIONS
;; ----------------------------------------------------------------------
(define_insn "addsi3"
[(set (match_operand:SI 0 "register_operand" "=r,r,r")
(plus:SI (match_operand:SI 1 "register_operand" "%0,r,r")
(match_operand:SI 2 "nonmemory_operand" "rJ,K,U")))]
""
"@
add %2,%0
addi %2,%1,%0
addi %O2(%P2),%1,%0"
[(set_attr "length" "2,4,4")
(set_attr "cc" "set_zn,set_zn,set_zn")])
;; ----------------------------------------------------------------------
;; SUBTRACT INSTRUCTIONS
;; ----------------------------------------------------------------------
(define_insn "subsi3"
[(set (match_operand:SI 0 "register_operand" "=r,r")
(minus:SI (match_operand:SI 1 "register_operand" "0,r")
(match_operand:SI 2 "register_operand" "r,0")))]
""
"@
sub %2,%0
subr %1,%0"
[(set_attr "length" "2,2")
(set_attr "cc" "set_zn")])
(define_insn "negsi2"
[(set (match_operand:SI 0 "register_operand" "=r")
(neg:SI (match_operand:SI 1 "register_operand" "0")))]
""
"subr %.,%0"
[(set_attr "length" "2")
(set_attr "cc" "set_zn")])
;; ----------------------------------------------------------------------
;; MULTIPLY INSTRUCTIONS
;; ----------------------------------------------------------------------
(define_expand "mulhisi3"
[(set (match_operand:SI 0 "register_operand" "")
(mult:SI
(sign_extend:SI (match_operand:HI 1 "register_operand" ""))
(sign_extend:SI (match_operand:HI 2 "nonmemory_operand" ""))))]
""
"if (GET_CODE (operands[2]) == CONST_INT)
{
emit_insn (gen_mulhisi3_internal2 (operands[0], operands[1], operands[2]));
DONE;
}")
(define_insn "*mulhisi3_internal1"
[(set (match_operand:SI 0 "register_operand" "=r")
(mult:SI
(sign_extend:SI (match_operand:HI 1 "register_operand" "%0"))
(sign_extend:SI (match_operand:HI 2 "register_operand" "r"))))]
""
"mulh %2,%0"
[(set_attr "length" "2")
(set_attr "cc" "none_0hit")
(set_attr "type" "mult")])
(define_insn "mulhisi3_internal2"
[(set (match_operand:SI 0 "register_operand" "=r,r")
(mult:SI
(sign_extend:SI (match_operand:HI 1 "register_operand" "%0,r"))
(match_operand:HI 2 "const_int_operand" "J,K")))]
""
"@
mulh %2,%0
mulhi %2,%1,%0"
[(set_attr "length" "2,4")
(set_attr "cc" "none_0hit,none_0hit")
(set_attr "type" "mult")])
;; ??? The scheduling info is probably wrong.
;; ??? This instruction can also generate the 32 bit highpart, but using it
;; may increase code size counter to the desired result.
;; ??? This instructions can also give a DImode result.
;; ??? There is unsigned version, but it matters only for the DImode/highpart
;; results.
(define_insn "mulsi3"
[(set (match_operand:SI 0 "register_operand" "=r")
(mult:SI (match_operand:SI 1 "register_operand" "%0")
(match_operand:SI 2 "reg_or_int9_operand" "rO")))]
"TARGET_V850E"
"mul %2,%1,%."
[(set_attr "length" "4")
(set_attr "cc" "none_0hit")
(set_attr "type" "mult")])
;; ----------------------------------------------------------------------
;; DIVIDE INSTRUCTIONS
;; ----------------------------------------------------------------------
;; ??? These insns do set the Z/N condition codes, except that they are based
;; on only one of the two results, so it doesn't seem to make sense to use
;; them.
;; ??? The scheduling info is probably wrong.
(define_insn "divmodsi4"
[(set (match_operand:SI 0 "register_operand" "=r")
(div:SI (match_operand:SI 1 "register_operand" "0")
(match_operand:SI 2 "register_operand" "r")))
(set (match_operand:SI 3 "register_operand" "=r")
(mod:SI (match_dup 1)
(match_dup 2)))]
"TARGET_V850E"
"div %2,%0,%3"
[(set_attr "length" "4")
(set_attr "cc" "clobber")
(set_attr "type" "other")])
(define_insn "udivmodsi4"
[(set (match_operand:SI 0 "register_operand" "=r")
(udiv:SI (match_operand:SI 1 "register_operand" "0")
(match_operand:SI 2 "register_operand" "r")))
(set (match_operand:SI 3 "register_operand" "=r")
(umod:SI (match_dup 1)
(match_dup 2)))]
"TARGET_V850E"
"divu %2,%0,%3"
[(set_attr "length" "4")
(set_attr "cc" "clobber")
(set_attr "type" "other")])
;; ??? There is a 2 byte instruction for generating only the quotient.
;; However, it isn't clear how to compute the length field correctly.
(define_insn "divmodhi4"
[(set (match_operand:HI 0 "register_operand" "=r")
(div:HI (match_operand:HI 1 "register_operand" "0")
(match_operand:HI 2 "register_operand" "r")))
(set (match_operand:HI 3 "register_operand" "=r")
(mod:HI (match_dup 1)
(match_dup 2)))]
"TARGET_V850E"
"divh %2,%0,%3"
[(set_attr "length" "4")
(set_attr "cc" "clobber")
(set_attr "type" "other")])
;; Half-words are sign-extended by default, so we must zero extend to a word
;; here before doing the divide.
(define_insn "udivmodhi4"
[(set (match_operand:HI 0 "register_operand" "=r")
(udiv:HI (match_operand:HI 1 "register_operand" "0")
(match_operand:HI 2 "register_operand" "r")))
(set (match_operand:HI 3 "register_operand" "=r")
(umod:HI (match_dup 1)
(match_dup 2)))]
"TARGET_V850E"
"zxh %0 ; divhu %2,%0,%3"
[(set_attr "length" "4")
(set_attr "cc" "clobber")
(set_attr "type" "other")])
;; ----------------------------------------------------------------------
;; AND INSTRUCTIONS
;; ----------------------------------------------------------------------
(define_insn "*v850_clr1_1"
[(set (match_operand:QI 0 "memory_operand" "=m")
(subreg:QI
(and:SI (subreg:SI (match_dup 0) 0)
(match_operand:QI 1 "not_power_of_two_operand" "")) 0))]
""
"*
{
rtx xoperands[2];
xoperands[0] = operands[0];
xoperands[1] = GEN_INT (~INTVAL (operands[1]) & 0xff);
output_asm_insn (\"clr1 %M1,%0\", xoperands);
return \"\";
}"
[(set_attr "length" "4")
(set_attr "cc" "clobber")])
(define_insn "*v850_clr1_2"
[(set (match_operand:HI 0 "indirect_operand" "=m")
(subreg:HI
(and:SI (subreg:SI (match_dup 0) 0)
(match_operand:HI 1 "not_power_of_two_operand" "")) 0))]
""
"*
{
int log2 = exact_log2 (~INTVAL (operands[1]) & 0xffff);
rtx xoperands[2];
xoperands[0] = gen_rtx_MEM (QImode,
plus_constant (XEXP (operands[0], 0), log2 / 8));
xoperands[1] = GEN_INT (log2 % 8);
output_asm_insn (\"clr1 %1,%0\", xoperands);
return \"\";
}"
[(set_attr "length" "4")
(set_attr "cc" "clobber")])
(define_insn "*v850_clr1_3"
[(set (match_operand:SI 0 "indirect_operand" "=m")
(and:SI (match_dup 0)
(match_operand:SI 1 "not_power_of_two_operand" "")))]
""
"*
{
int log2 = exact_log2 (~INTVAL (operands[1]) & 0xffffffff);
rtx xoperands[2];
xoperands[0] = gen_rtx_MEM (QImode,
plus_constant (XEXP (operands[0], 0), log2 / 8));
xoperands[1] = GEN_INT (log2 % 8);
output_asm_insn (\"clr1 %1,%0\", xoperands);
return \"\";
}"
[(set_attr "length" "4")
(set_attr "cc" "clobber")])
(define_insn "andsi3"
[(set (match_operand:SI 0 "register_operand" "=r,r,r")
(and:SI (match_operand:SI 1 "register_operand" "%0,0,r")
(match_operand:SI 2 "nonmemory_operand" "r,I,M")))]
""
"@
and %2,%0
and %.,%0
andi %2,%1,%0"
[(set_attr "length" "2,2,4")
(set_attr "cc" "set_znv")])
;; ----------------------------------------------------------------------
;; OR INSTRUCTIONS
;; ----------------------------------------------------------------------
(define_insn "*v850_set1_1"
[(set (match_operand:QI 0 "memory_operand" "=m")
(subreg:QI (ior:SI (subreg:SI (match_dup 0) 0)
(match_operand 1 "power_of_two_operand" "")) 0))]
""
"set1 %M1,%0"
[(set_attr "length" "4")
(set_attr "cc" "clobber")])
(define_insn "*v850_set1_2"
[(set (match_operand:HI 0 "indirect_operand" "=m")
(subreg:HI (ior:SI (subreg:SI (match_dup 0) 0)
(match_operand 1 "power_of_two_operand" "")) 0))]
""
"*
{
int log2 = exact_log2 (INTVAL (operands[1]));
if (log2 < 8)
return \"set1 %M1,%0\";
else
{
rtx xoperands[2];
xoperands[0] = gen_rtx_MEM (QImode,
plus_constant (XEXP (operands[0], 0),
log2 / 8));
xoperands[1] = GEN_INT (log2 % 8);
output_asm_insn (\"set1 %1,%0\", xoperands);
}
return \"\";
}"
[(set_attr "length" "4")
(set_attr "cc" "clobber")])
(define_insn "*v850_set1_3"
[(set (match_operand:SI 0 "indirect_operand" "=m")
(ior:SI (match_dup 0)
(match_operand 1 "power_of_two_operand" "")))]
""
"*
{
int log2 = exact_log2 (INTVAL (operands[1]));
if (log2 < 8)
return \"set1 %M1,%0\";
else
{
rtx xoperands[2];
xoperands[0] = gen_rtx_MEM (QImode,
plus_constant (XEXP (operands[0], 0),
log2 / 8));
xoperands[1] = GEN_INT (log2 % 8);
output_asm_insn (\"set1 %1,%0\", xoperands);
}
return \"\";
}"
[(set_attr "length" "4")
(set_attr "cc" "clobber")])
(define_insn "iorsi3"
[(set (match_operand:SI 0 "register_operand" "=r,r,r")
(ior:SI (match_operand:SI 1 "register_operand" "%0,0,r")
(match_operand:SI 2 "nonmemory_operand" "r,I,M")))]
""
"@
or %2,%0
or %.,%0
ori %2,%1,%0"
[(set_attr "length" "2,2,4")
(set_attr "cc" "set_znv")])
;; ----------------------------------------------------------------------
;; XOR INSTRUCTIONS
;; ----------------------------------------------------------------------
(define_insn "*v850_not1_1"
[(set (match_operand:QI 0 "memory_operand" "=m")
(subreg:QI (xor:SI (subreg:SI (match_dup 0) 0)
(match_operand 1 "power_of_two_operand" "")) 0))]
""
"not1 %M1,%0"
[(set_attr "length" "4")
(set_attr "cc" "clobber")])
(define_insn "*v850_not1_2"
[(set (match_operand:HI 0 "indirect_operand" "=m")
(subreg:HI (xor:SI (subreg:SI (match_dup 0) 0)
(match_operand 1 "power_of_two_operand" "")) 0))]
""
"*
{
int log2 = exact_log2 (INTVAL (operands[1]));
if (log2 < 8)
return \"not1 %M1,%0\";
else
{
rtx xoperands[2];
xoperands[0] = gen_rtx_MEM (QImode,
plus_constant (XEXP (operands[0], 0),
log2 / 8));
xoperands[1] = GEN_INT (log2 % 8);
output_asm_insn (\"not1 %1,%0\", xoperands);
}
return \"\";
}"
[(set_attr "length" "4")
(set_attr "cc" "clobber")])
(define_insn "*v850_not1_3"
[(set (match_operand:SI 0 "indirect_operand" "=m")
(xor:SI (match_dup 0)
(match_operand 1 "power_of_two_operand" "")))]
""
"*
{
int log2 = exact_log2 (INTVAL (operands[1]));
if (log2 < 8)
return \"not1 %M1,%0\";
else
{
rtx xoperands[2];
xoperands[0] = gen_rtx_MEM (QImode,
plus_constant (XEXP (operands[0], 0),
log2 / 8));
xoperands[1] = GEN_INT (log2 % 8);
output_asm_insn (\"not1 %1,%0\", xoperands);
}
return \"\";
}"
[(set_attr "length" "4")
(set_attr "cc" "clobber")])
(define_insn "xorsi3"
[(set (match_operand:SI 0 "register_operand" "=r,r,r")
(xor:SI (match_operand:SI 1 "register_operand" "%0,0,r")
(match_operand:SI 2 "nonmemory_operand" "r,I,M")))]
""
"@
xor %2,%0
xor %.,%0
xori %2,%1,%0"
[(set_attr "length" "2,2,4")
(set_attr "cc" "set_znv")])
;; ----------------------------------------------------------------------
;; NOT INSTRUCTIONS
;; ----------------------------------------------------------------------
(define_insn "one_cmplsi2"
[(set (match_operand:SI 0 "register_operand" "=r")
(not:SI (match_operand:SI 1 "register_operand" "r")))]
""
"not %1,%0"
[(set_attr "length" "2")
(set_attr "cc" "set_znv")])
;; -----------------------------------------------------------------
;; BIT FIELDS
;; -----------------------------------------------------------------
;; ??? Is it worth defining insv and extv for the V850 series?!?
;; An insv pattern would be useful, but does not get used because
;; store_bit_field never calls insv when storing a constant value into a
;; single-bit bitfield.
;; extv/extzv patterns would be useful, but do not get used because
;; optimize_bitfield_compare in fold-const usually converts single
;; bit extracts into an AND with a mask.
;; -----------------------------------------------------------------
;; Scc INSTRUCTIONS
;; -----------------------------------------------------------------
(define_insn "sle"
[(set (match_operand:SI 0 "register_operand" "=r")
(le:SI (cc0) (const_int 0)))]
""
"*
{
if ((cc_status.flags & CC_OVERFLOW_UNUSABLE) != 0)
return 0;
return \"setf le,%0\";
}"
[(set_attr "length" "4")
(set_attr "cc" "none_0hit")])
(define_insn "sleu"
[(set (match_operand:SI 0 "register_operand" "=r")
(leu:SI (cc0) (const_int 0)))]
""
"setf nh,%0"
[(set_attr "length" "4")
(set_attr "cc" "none_0hit")])
(define_insn "sge"
[(set (match_operand:SI 0 "register_operand" "=r")
(ge:SI (cc0) (const_int 0)))]
""
"*
{
if ((cc_status.flags & CC_OVERFLOW_UNUSABLE) != 0)
return 0;
return \"setf ge,%0\";
}"
[(set_attr "length" "4")
(set_attr "cc" "none_0hit")])
(define_insn "sgeu"
[(set (match_operand:SI 0 "register_operand" "=r")
(geu:SI (cc0) (const_int 0)))]
""
"setf nl,%0"
[(set_attr "length" "4")
(set_attr "cc" "none_0hit")])
(define_insn "slt"
[(set (match_operand:SI 0 "register_operand" "=r")
(lt:SI (cc0) (const_int 0)))]
""
"*
{
if ((cc_status.flags & CC_OVERFLOW_UNUSABLE) != 0)
return 0;
return \"setf lt,%0\";
}"
[(set_attr "length" "4")
(set_attr "cc" "none_0hit")])
(define_insn "sltu"
[(set (match_operand:SI 0 "register_operand" "=r")
(ltu:SI (cc0) (const_int 0)))]
""
"setf l,%0"
[(set_attr "length" "4")
(set_attr "cc" "none_0hit")])
(define_insn "sgt"
[(set (match_operand:SI 0 "register_operand" "=r")
(gt:SI (cc0) (const_int 0)))]
""
"*
{
if ((cc_status.flags & CC_OVERFLOW_UNUSABLE) != 0)
return 0;
return \"setf gt,%0\";
}"
[(set_attr "length" "4")
(set_attr "cc" "none_0hit")])
(define_insn "sgtu"
[(set (match_operand:SI 0 "register_operand" "=r")
(gtu:SI (cc0) (const_int 0)))]
""
"setf h,%0"
[(set_attr "length" "4")
(set_attr "cc" "none_0hit")])
(define_insn "seq"
[(set (match_operand:SI 0 "register_operand" "=r")
(eq:SI (cc0) (const_int 0)))]
""
"setf z,%0"
[(set_attr "length" "4")
(set_attr "cc" "none_0hit")])
(define_insn "sne"
[(set (match_operand:SI 0 "register_operand" "=r")
(ne:SI (cc0) (const_int 0)))]
""
"setf nz,%0"
[(set_attr "length" "4")
(set_attr "cc" "none_0hit")])
;; ----------------------------------------------------------------------
;; CONDITIONAL MOVE INSTRUCTIONS
;; ----------------------------------------------------------------------
;; Instructions using cc0 aren't allowed to have input reloads, so we must
;; hide the fact that this instruction uses cc0. We do so by including the
;; compare instruction inside it.
;; ??? This is very ugly. The right way to do this is to modify cmpsi so
;; that it doesn't emit RTL, and then modify the bcc/scc patterns so that
;; they emit RTL for the compare instruction. Unfortunately, this requires
;; lots of changes that will be hard to sanitize. So for now, cmpsi still
;; emits RTL, and I get the compare operands here from the previous insn.
(define_expand "movsicc"
[(set (match_operand:SI 0 "register_operand" "=r")
(if_then_else:SI
(match_operator 1 "comparison_operator"
[(match_dup 4) (match_dup 5)])
(match_operand:SI 2 "reg_or_const_operand" "rJ")
(match_operand:SI 3 "reg_or_const_operand" "rI")))]
"TARGET_V850E"
"
{
rtx insn = get_last_insn_anywhere ();
rtx src;
if ( (GET_CODE (operands[2]) == CONST_INT
&& GET_CODE (operands[3]) == CONST_INT))
{
int o2 = INTVAL (operands[2]);
int o3 = INTVAL (operands[3]);
if (o2 == 1 && o3 == 0)
FAIL; /* setf */
if (o3 == 1 && o2 == 0)
FAIL; /* setf */
if (o2 == 0 && (o3 < -16 || o3 > 15) && exact_log2 (o3) >= 0)
FAIL; /* setf + shift */
if (o3 == 0 && (o2 < -16 || o2 > 15) && exact_log2 (o2) >=0)
FAIL; /* setf + shift */
if (o2 != 0)
operands[2] = copy_to_mode_reg (SImode, operands[2]);
if (o3 !=0 )
operands[3] = copy_to_mode_reg (SImode, operands[3]);
}
else
{
if (GET_CODE (operands[2]) != REG)
operands[2] = copy_to_mode_reg (SImode,operands[2]);
if (GET_CODE (operands[3]) != REG)
operands[3] = copy_to_mode_reg (SImode, operands[3]);
}
gcc_assert (GET_CODE (insn) == INSN
&& GET_CODE (PATTERN (insn)) == SET
&& SET_DEST (PATTERN (insn)) == cc0_rtx);
src = SET_SRC (PATTERN (insn));
switch (GET_CODE (src))
{
case COMPARE:
operands[4] = XEXP (src, 0);
operands[5] = XEXP (src, 1);
break;
case REG:
case SUBREG:
operands[4] = src;
operands[5] = const0_rtx;
break;
default:
gcc_unreachable ();
}
}")
;; ??? Clobbering the condition codes is overkill.
;; ??? We sometimes emit an unnecessary compare instruction because the
;; condition codes may have already been set by an earlier instruction,
;; but we have no code here to avoid the compare if it is unnecessary.
(define_insn "*movsicc_normal"
[(set (match_operand:SI 0 "register_operand" "=r")
(if_then_else:SI
(match_operator 1 "comparison_operator"
[(match_operand:SI 4 "register_operand" "r")
(match_operand:SI 5 "reg_or_int5_operand" "rJ")])
(match_operand:SI 2 "reg_or_int5_operand" "rJ")
(match_operand:SI 3 "reg_or_0_operand" "rI")))]
"TARGET_V850E"
"cmp %5,%4 ; cmov %c1,%2,%z3,%0"
[(set_attr "length" "6")
(set_attr "cc" "clobber")])
(define_insn "*movsicc_reversed"
[(set (match_operand:SI 0 "register_operand" "=r")
(if_then_else:SI
(match_operator 1 "comparison_operator"
[(match_operand:SI 4 "register_operand" "r")
(match_operand:SI 5 "reg_or_int5_operand" "rJ")])
(match_operand:SI 2 "reg_or_0_operand" "rI")
(match_operand:SI 3 "reg_or_int5_operand" "rJ")))]
"TARGET_V850E"
"cmp %5,%4 ; cmov %C1,%3,%z2,%0"
[(set_attr "length" "6")
(set_attr "cc" "clobber")])
(define_insn "*movsicc_tst1"
[(set (match_operand:SI 0 "register_operand" "=r")
(if_then_else:SI
(match_operator 1 "comparison_operator"
[(zero_extract:SI
(match_operand:QI 2 "memory_operand" "m")
(const_int 1)
(match_operand 3 "const_int_operand" "n"))
(const_int 0)])
(match_operand:SI 4 "reg_or_int5_operand" "rJ")
(match_operand:SI 5 "reg_or_0_operand" "rI")))]
"TARGET_V850E"
"tst1 %3,%2 ; cmov %c1,%4,%z5,%0"
[(set_attr "length" "8")
(set_attr "cc" "clobber")])
(define_insn "*movsicc_tst1_reversed"
[(set (match_operand:SI 0 "register_operand" "=r")
(if_then_else:SI
(match_operator 1 "comparison_operator"
[(zero_extract:SI
(match_operand:QI 2 "memory_operand" "m")
(const_int 1)
(match_operand 3 "const_int_operand" "n"))
(const_int 0)])
(match_operand:SI 4 "reg_or_0_operand" "rI")
(match_operand:SI 5 "reg_or_int5_operand" "rJ")))]
"TARGET_V850E"
"tst1 %3,%2 ; cmov %C1,%5,%z4,%0"
[(set_attr "length" "8")
(set_attr "cc" "clobber")])
;; Matching for sasf requires combining 4 instructions, so we provide a
;; dummy pattern to match the first 3, which will always be turned into the
;; second pattern by subsequent combining. As above, we must include the
;; comparison to avoid input reloads in an insn using cc0.
(define_insn "*sasf_1"
[(set (match_operand:SI 0 "register_operand" "")
(ior:SI (match_operator 1 "comparison_operator" [(cc0) (const_int 0)])
(ashift:SI (match_operand:SI 2 "register_operand" "")
(const_int 1))))]
"TARGET_V850E"
"* gcc_unreachable ();")
(define_insn "*sasf_2"
[(set (match_operand:SI 0 "register_operand" "=r")
(ior:SI
(match_operator 1 "comparison_operator"
[(match_operand:SI 3 "register_operand" "r")
(match_operand:SI 4 "reg_or_int5_operand" "rJ")])
(ashift:SI (match_operand:SI 2 "register_operand" "0")
(const_int 1))))]
"TARGET_V850E"
"cmp %4,%3 ; sasf %c1,%0"
[(set_attr "length" "6")
(set_attr "cc" "clobber")])
(define_split
[(set (match_operand:SI 0 "register_operand" "")
(if_then_else:SI
(match_operator 1 "comparison_operator"
[(match_operand:SI 4 "register_operand" "")
(match_operand:SI 5 "reg_or_int5_operand" "")])
(match_operand:SI 2 "const_int_operand" "")
(match_operand:SI 3 "const_int_operand" "")))]
"TARGET_V850E
&& ((INTVAL (operands[2]) ^ INTVAL (operands[3])) == 1)
&& ((INTVAL (operands[2]) + INTVAL (operands[3])) != 1)
&& (GET_CODE (operands[5]) == CONST_INT
|| REGNO (operands[0]) != REGNO (operands[5]))
&& REGNO (operands[0]) != REGNO (operands[4])"
[(set (match_dup 0) (match_dup 6))
(set (match_dup 0)
(ior:SI (match_op_dup 7 [(match_dup 4) (match_dup 5)])
(ashift:SI (match_dup 0) (const_int 1))))]
"
{
operands[6] = GEN_INT (INTVAL (operands[2]) >> 1);
if (INTVAL (operands[2]) & 0x1)
operands[7] = operands[1];
else
operands[7] = gen_rtx_fmt_ee (reverse_condition (GET_CODE (operands[1])),
GET_MODE (operands[1]),
XEXP (operands[1], 0), XEXP (operands[1], 1));
}")
;; ---------------------------------------------------------------------
;; BYTE SWAP INSTRUCTIONS
;; ---------------------------------------------------------------------
(define_expand "rotlhi3"
[(set (match_operand:HI 0 "register_operand" "")
(rotate:HI (match_operand:HI 1 "register_operand" "")
(match_operand:HI 2 "const_int_operand" "")))]
"TARGET_V850E"
"
{
if (INTVAL (operands[2]) != 8)
FAIL;
}")
(define_insn "*rotlhi3_8"
[(set (match_operand:HI 0 "register_operand" "=r")
(rotate:HI (match_operand:HI 1 "register_operand" "r")
(const_int 8)))]
"TARGET_V850E"
"bsh %1,%0"
[(set_attr "length" "4")
(set_attr "cc" "clobber")])
(define_expand "rotlsi3"
[(set (match_operand:SI 0 "register_operand" "")
(rotate:SI (match_operand:SI 1 "register_operand" "")
(match_operand:SI 2 "const_int_operand" "")))]
"TARGET_V850E"
"
{
if (INTVAL (operands[2]) != 16)
FAIL;
}")
(define_insn "*rotlsi3_16"
[(set (match_operand:SI 0 "register_operand" "=r")
(rotate:SI (match_operand:SI 1 "register_operand" "r")
(const_int 16)))]
"TARGET_V850E"
"hsw %1,%0"
[(set_attr "length" "4")
(set_attr "cc" "clobber")])
;; ----------------------------------------------------------------------
;; JUMP INSTRUCTIONS
;; ----------------------------------------------------------------------
;; Conditional jump instructions
(define_expand "ble"
[(set (pc)
(if_then_else (le (cc0)
(const_int 0))
(label_ref (match_operand 0 "" ""))
(pc)))]
""
"")
(define_expand "bleu"
[(set (pc)
(if_then_else (leu (cc0)
(const_int 0))
(label_ref (match_operand 0 "" ""))
(pc)))]
""
"")
(define_expand "bge"
[(set (pc)
(if_then_else (ge (cc0)
(const_int 0))
(label_ref (match_operand 0 "" ""))
(pc)))]
""
"")
(define_expand "bgeu"
[(set (pc)
(if_then_else (geu (cc0)
(const_int 0))
(label_ref (match_operand 0 "" ""))
(pc)))]
""
"")
(define_expand "blt"
[(set (pc)
(if_then_else (lt (cc0)
(const_int 0))
(label_ref (match_operand 0 "" ""))
(pc)))]
""
"")
(define_expand "bltu"
[(set (pc)
(if_then_else (ltu (cc0)
(const_int 0))
(label_ref (match_operand 0 "" ""))
(pc)))]
""
"")
(define_expand "bgt"
[(set (pc)
(if_then_else (gt (cc0)
(const_int 0))
(label_ref (match_operand 0 "" ""))
(pc)))]
""
"")
(define_expand "bgtu"
[(set (pc)
(if_then_else (gtu (cc0)
(const_int 0))
(label_ref (match_operand 0 "" ""))
(pc)))]
""
"")
(define_expand "beq"
[(set (pc)
(if_then_else (eq (cc0)
(const_int 0))
(label_ref (match_operand 0 "" ""))
(pc)))]
""
"")
(define_expand "bne"
[(set (pc)
(if_then_else (ne (cc0)
(const_int 0))
(label_ref (match_operand 0 "" ""))
(pc)))]
""
"")
(define_insn "*branch_normal"
[(set (pc)
(if_then_else (match_operator 1 "comparison_operator"
[(cc0) (const_int 0)])
(label_ref (match_operand 0 "" ""))
(pc)))]
""
"*
{
if ((cc_status.flags & CC_OVERFLOW_UNUSABLE) != 0
&& (GET_CODE (operands[1]) == GT
|| GET_CODE (operands[1]) == GE
|| GET_CODE (operands[1]) == LE
|| GET_CODE (operands[1]) == LT))
return 0;
if (get_attr_length (insn) == 2)
return \"b%b1 %l0\";
else
return \"b%B1 .+6 ; jr %l0\";
}"
[(set (attr "length")
(if_then_else (lt (abs (minus (match_dup 0) (pc)))
(const_int 256))
(const_int 2)
(const_int 6)))
(set_attr "cc" "none")])
(define_insn "*branch_invert"
[(set (pc)
(if_then_else (match_operator 1 "comparison_operator"
[(cc0) (const_int 0)])
(pc)
(label_ref (match_operand 0 "" ""))))]
""
"*
{
if ((cc_status.flags & CC_OVERFLOW_UNUSABLE) != 0
&& (GET_CODE (operands[1]) == GT
|| GET_CODE (operands[1]) == GE
|| GET_CODE (operands[1]) == LE
|| GET_CODE (operands[1]) == LT))
return 0;
if (get_attr_length (insn) == 2)
return \"b%B1 %l0\";
else
return \"b%b1 .+6 ; jr %l0\";
}"
[(set (attr "length")
(if_then_else (lt (abs (minus (match_dup 0) (pc)))
(const_int 256))
(const_int 2)
(const_int 6)))
(set_attr "cc" "none")])
;; Unconditional and other jump instructions.
(define_insn "jump"
[(set (pc)
(label_ref (match_operand 0 "" "")))]
""
"*
{
if (get_attr_length (insn) == 2)
return \"br %0\";
else
return \"jr %0\";
}"
[(set (attr "length")
(if_then_else (lt (abs (minus (match_dup 0) (pc)))
(const_int 256))
(const_int 2)
(const_int 4)))
(set_attr "cc" "none")])
(define_insn "indirect_jump"
[(set (pc) (match_operand:SI 0 "register_operand" "r"))]
""
"jmp %0"
[(set_attr "length" "2")
(set_attr "cc" "none")])
(define_insn "tablejump"
[(set (pc) (match_operand:SI 0 "register_operand" "r"))
(use (label_ref (match_operand 1 "" "")))]
""
"jmp %0"
[(set_attr "length" "2")
(set_attr "cc" "none")])
(define_insn "switch"
[(set (pc)
(plus:SI
(sign_extend:SI
(mem:HI
(plus:SI (ashift:SI (match_operand:SI 0 "register_operand" "r")
(const_int 1))
(label_ref (match_operand 1 "" "")))))
(label_ref (match_dup 1))))]
"TARGET_V850E"
"switch %0"
[(set_attr "length" "2")
(set_attr "cc" "none")])
(define_expand "casesi"
[(match_operand:SI 0 "register_operand" "")
(match_operand:SI 1 "register_operand" "")
(match_operand:SI 2 "register_operand" "")
(match_operand 3 "" "") (match_operand 4 "" "")]
""
"
{
rtx reg = gen_reg_rtx (SImode);
rtx tableaddress = gen_reg_rtx (SImode);
rtx mem;
/* Subtract the lower bound from the index. */
emit_insn (gen_subsi3 (reg, operands[0], operands[1]));
/* Compare the result against the number of table entries. */
emit_insn (gen_cmpsi (reg, operands[2]));
/* Branch to the default label if out of range of the table. */
emit_jump_insn (gen_bgtu (operands[4]));
/* Disabled because the switch pattern is not being recognized
properly at the moment. eg. compiling vfscanf.c in newlib. */
if (0 && ! TARGET_BIG_SWITCH && TARGET_V850E)
{
emit_jump_insn (gen_switch (reg, operands[3]));
DONE;
}
/* Shift index for the table array access. */
emit_insn (gen_ashlsi3 (reg, reg, GEN_INT (TARGET_BIG_SWITCH ? 2 : 1)));
/* Load the table address into a pseudo. */
emit_insn (gen_movsi (tableaddress,
gen_rtx_LABEL_REF (Pmode, operands[3])));
/* Add the table address to the index. */
emit_insn (gen_addsi3 (reg, reg, tableaddress));
/* Load the table entry. */
mem = gen_const_mem (CASE_VECTOR_MODE, reg);
if (! TARGET_BIG_SWITCH)
{
rtx reg2 = gen_reg_rtx (HImode);
emit_insn (gen_movhi (reg2, mem));
emit_insn (gen_extendhisi2 (reg, reg2));
}
else
emit_insn (gen_movsi (reg, mem));
/* Add the table address. */
emit_insn (gen_addsi3 (reg, reg, tableaddress));
/* Branch to the switch label. */
emit_jump_insn (gen_tablejump (reg, operands[3]));
DONE;
}")
;; Call subroutine with no return value.
(define_expand "call"
[(call (match_operand:QI 0 "general_operand" "")
(match_operand:SI 1 "general_operand" ""))]
""
"
{
if (! call_address_operand (XEXP (operands[0], 0), QImode)
|| TARGET_LONG_CALLS)
XEXP (operands[0], 0) = force_reg (SImode, XEXP (operands[0], 0));
if (TARGET_LONG_CALLS)
emit_call_insn (gen_call_internal_long (XEXP (operands[0], 0), operands[1]));
else
emit_call_insn (gen_call_internal_short (XEXP (operands[0], 0), operands[1]));
DONE;
}")
(define_insn "call_internal_short"
[(call (mem:QI (match_operand:SI 0 "call_address_operand" "S,r"))
(match_operand:SI 1 "general_operand" "g,g"))
(clobber (reg:SI 31))]
"! TARGET_LONG_CALLS"
"@
jarl %0,r31
jarl .+4,r31 ; add 4,r31 ; jmp %0"
[(set_attr "length" "4,8")]
)
(define_insn "call_internal_long"
[(call (mem:QI (match_operand:SI 0 "call_address_operand" "S,r"))
(match_operand:SI 1 "general_operand" "g,g"))
(clobber (reg:SI 31))]
"TARGET_LONG_CALLS"
"*
{
if (which_alternative == 0)
{
if (GET_CODE (operands[0]) == REG)
return \"jarl %0,r31\";
else
return \"movhi hi(%0), r0, r11 ; movea lo(%0), r11, r11 ; jarl .+4,r31 ; add 4, r31 ; jmp r11\";
}
else
return \"jarl .+4,r31 ; add 4,r31 ; jmp %0\";
}"
[(set_attr "length" "16,8")]
)
;; Call subroutine, returning value in operand 0
;; (which must be a hard register).
(define_expand "call_value"
[(set (match_operand 0 "" "")
(call (match_operand:QI 1 "general_operand" "")
(match_operand:SI 2 "general_operand" "")))]
""
"
{
if (! call_address_operand (XEXP (operands[1], 0), QImode)
|| TARGET_LONG_CALLS)
XEXP (operands[1], 0) = force_reg (SImode, XEXP (operands[1], 0));
if (TARGET_LONG_CALLS)
emit_call_insn (gen_call_value_internal_long (operands[0],
XEXP (operands[1], 0),
operands[2]));
else
emit_call_insn (gen_call_value_internal_short (operands[0],
XEXP (operands[1], 0),
operands[2]));
DONE;
}")
(define_insn "call_value_internal_short"
[(set (match_operand 0 "" "=r,r")
(call (mem:QI (match_operand:SI 1 "call_address_operand" "S,r"))
(match_operand:SI 2 "general_operand" "g,g")))
(clobber (reg:SI 31))]
"! TARGET_LONG_CALLS"
"@
jarl %1,r31
jarl .+4,r31 ; add 4,r31 ; jmp %1"
[(set_attr "length" "4,8")]
)
(define_insn "call_value_internal_long"
[(set (match_operand 0 "" "=r,r")
(call (mem:QI (match_operand:SI 1 "call_address_operand" "S,r"))
(match_operand:SI 2 "general_operand" "g,g")))
(clobber (reg:SI 31))]
"TARGET_LONG_CALLS"
"*
{
if (which_alternative == 0)
{
if (GET_CODE (operands[1]) == REG)
return \"jarl %1, r31\";
else
/* Reload can generate this pattern.... */
return \"movhi hi(%1), r0, r11 ; movea lo(%1), r11, r11 ; jarl .+4, r31 ; add 4, r31 ; jmp r11\";
}
else
return \"jarl .+4, r31 ; add 4, r31 ; jmp %1\";
}"
[(set_attr "length" "16,8")]
)
(define_insn "nop"
[(const_int 0)]
""
"nop"
[(set_attr "length" "2")
(set_attr "cc" "none")])
;; ----------------------------------------------------------------------
;; EXTEND INSTRUCTIONS
;; ----------------------------------------------------------------------
(define_insn ""
[(set (match_operand:SI 0 "register_operand" "=r,r,r,r")
(zero_extend:SI
(match_operand:HI 1 "nonimmediate_operand" "0,r,T,m")))]
"TARGET_V850E"
"@
zxh %0
andi 65535,%1,%0
sld.hu %1,%0
ld.hu %1,%0"
[(set_attr "length" "2,4,2,4")
(set_attr "cc" "none_0hit,set_znv,none_0hit,none_0hit")])
(define_insn "zero_extendhisi2"
[(set (match_operand:SI 0 "register_operand" "=r")
(zero_extend:SI
(match_operand:HI 1 "register_operand" "r")))]
""
"andi 65535,%1,%0"
[(set_attr "length" "4")
(set_attr "cc" "set_znv")])
(define_insn ""
[(set (match_operand:SI 0 "register_operand" "=r,r,r,r")
(zero_extend:SI
(match_operand:QI 1 "nonimmediate_operand" "0,r,T,m")))]
"TARGET_V850E"
"@
zxb %0
andi 255,%1,%0
sld.bu %1,%0
ld.bu %1,%0"
[(set_attr "length" "2,4,2,4")
(set_attr "cc" "none_0hit,set_znv,none_0hit,none_0hit")])
(define_insn "zero_extendqisi2"
[(set (match_operand:SI 0 "register_operand" "=r")
(zero_extend:SI
(match_operand:QI 1 "register_operand" "r")))]
""
"andi 255,%1,%0"
[(set_attr "length" "4")
(set_attr "cc" "set_znv")])
;;- sign extension instructions
;; ??? The extendhisi2 pattern should not emit shifts for v850e?
(define_insn "*extendhisi_insn"
[(set (match_operand:SI 0 "register_operand" "=r,r,r")
(sign_extend:SI (match_operand:HI 1 "nonimmediate_operand" "0,Q,m")))]
"TARGET_V850E"
"@
sxh %0
sld.h %1,%0
ld.h %1,%0"
[(set_attr "length" "2,2,4")
(set_attr "cc" "none_0hit,none_0hit,none_0hit")])
;; ??? This is missing a sign extend from memory pattern to match the ld.h
;; instruction.
(define_expand "extendhisi2"
[(set (match_dup 2)
(ashift:SI (match_operand:HI 1 "register_operand" "")
(const_int 16)))
(set (match_operand:SI 0 "register_operand" "")
(ashiftrt:SI (match_dup 2)
(const_int 16)))]
""
"
{
operands[1] = gen_lowpart (SImode, operands[1]);
operands[2] = gen_reg_rtx (SImode);
}")
;; ??? The extendqisi2 pattern should not emit shifts for v850e?
(define_insn "*extendqisi_insn"
[(set (match_operand:SI 0 "register_operand" "=r,r,r")
(sign_extend:SI (match_operand:QI 1 "nonimmediate_operand" "0,Q,m")))]
"TARGET_V850E"
"@
sxb %0
sld.b %1,%0
ld.b %1,%0"
[(set_attr "length" "2,2,4")
(set_attr "cc" "none_0hit,none_0hit,none_0hit")])
;; ??? This is missing a sign extend from memory pattern to match the ld.b
;; instruction.
(define_expand "extendqisi2"
[(set (match_dup 2)
(ashift:SI (match_operand:QI 1 "register_operand" "")
(const_int 24)))
(set (match_operand:SI 0 "register_operand" "")
(ashiftrt:SI (match_dup 2)
(const_int 24)))]
""
"
{
operands[1] = gen_lowpart (SImode, operands[1]);
operands[2] = gen_reg_rtx (SImode);
}")
;; ----------------------------------------------------------------------
;; SHIFTS
;; ----------------------------------------------------------------------
(define_insn "ashlsi3"
[(set (match_operand:SI 0 "register_operand" "=r,r")
(ashift:SI
(match_operand:SI 1 "register_operand" "0,0")
(match_operand:SI 2 "nonmemory_operand" "r,N")))]
""
"@
shl %2,%0
shl %2,%0"
[(set_attr "length" "4,2")
(set_attr "cc" "set_znv")])
(define_insn "lshrsi3"
[(set (match_operand:SI 0 "register_operand" "=r,r")
(lshiftrt:SI
(match_operand:SI 1 "register_operand" "0,0")
(match_operand:SI 2 "nonmemory_operand" "r,N")))]
""
"@
shr %2,%0
shr %2,%0"
[(set_attr "length" "4,2")
(set_attr "cc" "set_znv")])
(define_insn "ashrsi3"
[(set (match_operand:SI 0 "register_operand" "=r,r")
(ashiftrt:SI
(match_operand:SI 1 "register_operand" "0,0")
(match_operand:SI 2 "nonmemory_operand" "r,N")))]
""
"@
sar %2,%0
sar %2,%0"
[(set_attr "length" "4,2")
(set_attr "cc" "set_znv")])
;; ----------------------------------------------------------------------
;; PROLOGUE/EPILOGUE
;; ----------------------------------------------------------------------
(define_expand "prologue"
[(const_int 0)]
""
"expand_prologue (); DONE;")
(define_expand "epilogue"
[(return)]
""
"
{
/* Try to use the trivial return first. Else use the
full epilogue. */
if (0)
emit_jump_insn (gen_return ());
else
expand_epilogue ();
DONE;
}")
(define_insn "return"
[(return)]
"reload_completed && compute_frame_size (get_frame_size (), (long *)0) == 0"
"jmp [r31]"
[(set_attr "length" "2")
(set_attr "cc" "none")])
(define_insn "return_internal"
[(return)
(use (reg:SI 31))]
""
"jmp [r31]"
[(set_attr "length" "2")
(set_attr "cc" "none")])
;; ----------------------------------------------------------------------
;; HELPER INSTRUCTIONS for saving the prologue and epilog registers
;; ----------------------------------------------------------------------
;; This pattern will match a stack adjust RTX followed by any number of push
;; RTXs. These RTXs will then be turned into a suitable call to a worker
;; function.
;;
;; Actually, convert the RTXs into a PREPARE instruction.
;;
(define_insn ""
[(match_parallel 0 "pattern_is_ok_for_prepare"
[(set (reg:SI 3)
(plus:SI (reg:SI 3) (match_operand:SI 1 "immediate_operand" "i")))
(set (mem:SI (plus:SI (reg:SI 3)
(match_operand:SI 2 "immediate_operand" "i")))
(match_operand:SI 3 "register_is_ok_for_epilogue" "r"))])]
"TARGET_PROLOG_FUNCTION && TARGET_V850E"
"* return construct_prepare_instruction (operands[0]);
"
[(set_attr "length" "4")
(set_attr "cc" "none")])
(define_insn ""
[(match_parallel 0 "pattern_is_ok_for_prologue"
[(set (reg:SI 3)
(plus:SI (reg:SI 3) (match_operand:SI 1 "immediate_operand" "i")))
(set (mem:SI (plus:SI (reg:SI 3)
(match_operand:SI 2 "immediate_operand" "i")))
(match_operand:SI 3 "register_is_ok_for_epilogue" "r"))])]
"TARGET_PROLOG_FUNCTION && TARGET_V850"
"* return construct_save_jarl (operands[0]);
"
[(set (attr "length") (if_then_else (eq_attr "long_calls" "yes")
(const_string "16")
(const_string "4")))
(set_attr "cc" "clobber")])
;;
;; Actually, turn the RTXs into a DISPOSE instruction.
;;
(define_insn ""
[(match_parallel 0 "pattern_is_ok_for_dispose"
[(return)
(set (reg:SI 3)
(plus:SI (reg:SI 3) (match_operand:SI 1 "immediate_operand" "i")))
(set (match_operand:SI 2 "register_is_ok_for_epilogue" "=r")
(mem:SI (plus:SI (reg:SI 3)
(match_operand:SI 3 "immediate_operand" "i"))))])]
"TARGET_PROLOG_FUNCTION && TARGET_V850E"
"* return construct_dispose_instruction (operands[0]);
"
[(set_attr "length" "4")
(set_attr "cc" "none")])
;; This pattern will match a return RTX followed by any number of pop RTXs
;; and possible a stack adjustment as well. These RTXs will be turned into
;; a suitable call to a worker function.
(define_insn ""
[(match_parallel 0 "pattern_is_ok_for_epilogue"
[(return)
(set (reg:SI 3)
(plus:SI (reg:SI 3) (match_operand:SI 1 "immediate_operand" "i")))
(set (match_operand:SI 2 "register_is_ok_for_epilogue" "=r")
(mem:SI (plus:SI (reg:SI 3)
(match_operand:SI 3 "immediate_operand" "i"))))])]
"TARGET_PROLOG_FUNCTION && TARGET_V850"
"* return construct_restore_jr (operands[0]);
"
[(set (attr "length") (if_then_else (eq_attr "long_calls" "yes")
(const_string "12")
(const_string "4")))
(set_attr "cc" "clobber")])
;; Initialize an interrupt function. Do not depend on TARGET_PROLOG_FUNCTION.
(define_insn "callt_save_interrupt"
[(unspec_volatile [(const_int 0)] 2)]
"TARGET_V850E && !TARGET_DISABLE_CALLT"
;; The CALLT instruction stores the next address of CALLT to CTPC register
;; without saving its previous value. So if the interrupt handler
;; or its caller could possibly execute the CALLT insn, save_interrupt
;; MUST NOT be called via CALLT.
"*
{
output_asm_insn (\"addi -24, sp, sp\", operands);
output_asm_insn (\"st.w r10, 12[sp]\", operands);
output_asm_insn (\"stsr ctpc, r10\", operands);
output_asm_insn (\"st.w r10, 16[sp]\", operands);
output_asm_insn (\"stsr ctpsw, r10\", operands);
output_asm_insn (\"st.w r10, 20[sp]\", operands);
output_asm_insn (\"callt ctoff(__callt_save_interrupt)\", operands);
return \"\";
}"
[(set_attr "length" "26")
(set_attr "cc" "none")])
(define_insn "callt_return_interrupt"
[(unspec_volatile [(const_int 0)] 3)]
"TARGET_V850E && !TARGET_DISABLE_CALLT"
"callt ctoff(__callt_return_interrupt)"
[(set_attr "length" "2")
(set_attr "cc" "clobber")])
(define_insn "save_interrupt"
[(set (reg:SI 3) (plus:SI (reg:SI 3) (const_int -16)))
(set (mem:SI (plus:SI (reg:SI 3) (const_int -16))) (reg:SI 30))
(set (mem:SI (plus:SI (reg:SI 3) (const_int -12))) (reg:SI 4))
(set (mem:SI (plus:SI (reg:SI 3) (const_int -8))) (reg:SI 1))
(set (mem:SI (plus:SI (reg:SI 3) (const_int -4))) (reg:SI 10))]
""
"*
{
if (TARGET_PROLOG_FUNCTION && !TARGET_LONG_CALLS)
return \"add -16,sp\;st.w r10,12[sp]\;jarl __save_interrupt,r10\";
else
{
output_asm_insn (\"add -16, sp\", operands);
output_asm_insn (\"st.w r10, 12[sp]\", operands);
output_asm_insn (\"st.w ep, 0[sp]\", operands);
output_asm_insn (\"st.w gp, 4[sp]\", operands);
output_asm_insn (\"st.w r1, 8[sp]\", operands);
output_asm_insn (\"movhi hi(__ep), r0, ep\", operands);
output_asm_insn (\"movea lo(__ep), ep, ep\", operands);
output_asm_insn (\"movhi hi(__gp), r0, gp\", operands);
output_asm_insn (\"movea lo(__gp), gp, gp\", operands);
return \"\";
}
}"
[(set (attr "length")
(if_then_else (ne (symbol_ref "TARGET_LONG_CALLS") (const_int 0))
(const_int 10)
(const_int 34)))
(set_attr "cc" "clobber")])
;; Restore r1, r4, r10, and return from the interrupt
(define_insn "return_interrupt"
[(return)
(set (reg:SI 3) (plus:SI (reg:SI 3) (const_int 16)))
(set (reg:SI 10) (mem:SI (plus:SI (reg:SI 3) (const_int 12))))
(set (reg:SI 1) (mem:SI (plus:SI (reg:SI 3) (const_int 8))))
(set (reg:SI 4) (mem:SI (plus:SI (reg:SI 3) (const_int 4))))
(set (reg:SI 30) (mem:SI (reg:SI 3)))]
""
"*
{
if (TARGET_PROLOG_FUNCTION && !TARGET_LONG_CALLS)
return \"jr __return_interrupt\";
else
{
output_asm_insn (\"ld.w 0[sp], ep\", operands);
output_asm_insn (\"ld.w 4[sp], gp\", operands);
output_asm_insn (\"ld.w 8[sp], r1\", operands);
output_asm_insn (\"ld.w 12[sp], r10\", operands);
output_asm_insn (\"addi 16, sp, sp\", operands);
output_asm_insn (\"reti\", operands);
return \"\";
}
}"
[(set (attr "length")
(if_then_else (ne (symbol_ref "TARGET_LONG_CALLS") (const_int 0))
(const_int 4)
(const_int 24)))
(set_attr "cc" "clobber")])
;; Save all registers except for the registers saved in save_interrupt when
;; an interrupt function makes a call.
;; UNSPEC_VOLATILE is considered to use and clobber all hard registers and
;; all of memory. This blocks insns from being moved across this point.
;; This is needed because the rest of the compiler is not ready to handle
;; insns this complicated.
(define_insn "callt_save_all_interrupt"
[(unspec_volatile [(const_int 0)] 0)]
"TARGET_V850E && !TARGET_DISABLE_CALLT"
"callt ctoff(__callt_save_all_interrupt)"
[(set_attr "length" "2")
(set_attr "cc" "none")])
(define_insn "save_all_interrupt"
[(unspec_volatile [(const_int 0)] 0)]
""
"*
{
if (TARGET_PROLOG_FUNCTION && !TARGET_LONG_CALLS)
return \"jarl __save_all_interrupt,r10\";
output_asm_insn (\"addi -120, sp, sp\", operands);
if (TARGET_EP)
{
output_asm_insn (\"mov ep, r1\", operands);
output_asm_insn (\"mov sp, ep\", operands);
output_asm_insn (\"sst.w r31, 116[ep]\", operands);
output_asm_insn (\"sst.w r2, 112[ep]\", operands);
output_asm_insn (\"sst.w gp, 108[ep]\", operands);
output_asm_insn (\"sst.w r6, 104[ep]\", operands);
output_asm_insn (\"sst.w r7, 100[ep]\", operands);
output_asm_insn (\"sst.w r8, 96[ep]\", operands);
output_asm_insn (\"sst.w r9, 92[ep]\", operands);
output_asm_insn (\"sst.w r11, 88[ep]\", operands);
output_asm_insn (\"sst.w r12, 84[ep]\", operands);
output_asm_insn (\"sst.w r13, 80[ep]\", operands);
output_asm_insn (\"sst.w r14, 76[ep]\", operands);
output_asm_insn (\"sst.w r15, 72[ep]\", operands);
output_asm_insn (\"sst.w r16, 68[ep]\", operands);
output_asm_insn (\"sst.w r17, 64[ep]\", operands);
output_asm_insn (\"sst.w r18, 60[ep]\", operands);
output_asm_insn (\"sst.w r19, 56[ep]\", operands);
output_asm_insn (\"sst.w r20, 52[ep]\", operands);
output_asm_insn (\"sst.w r21, 48[ep]\", operands);
output_asm_insn (\"sst.w r22, 44[ep]\", operands);
output_asm_insn (\"sst.w r23, 40[ep]\", operands);
output_asm_insn (\"sst.w r24, 36[ep]\", operands);
output_asm_insn (\"sst.w r25, 32[ep]\", operands);
output_asm_insn (\"sst.w r26, 28[ep]\", operands);
output_asm_insn (\"sst.w r27, 24[ep]\", operands);
output_asm_insn (\"sst.w r28, 20[ep]\", operands);
output_asm_insn (\"sst.w r29, 16[ep]\", operands);
output_asm_insn (\"mov r1, ep\", operands);
}
else
{
output_asm_insn (\"st.w r31, 116[sp]\", operands);
output_asm_insn (\"st.w r2, 112[sp]\", operands);
output_asm_insn (\"st.w gp, 108[sp]\", operands);
output_asm_insn (\"st.w r6, 104[sp]\", operands);
output_asm_insn (\"st.w r7, 100[sp]\", operands);
output_asm_insn (\"st.w r8, 96[sp]\", operands);
output_asm_insn (\"st.w r9, 92[sp]\", operands);
output_asm_insn (\"st.w r11, 88[sp]\", operands);
output_asm_insn (\"st.w r12, 84[sp]\", operands);
output_asm_insn (\"st.w r13, 80[sp]\", operands);
output_asm_insn (\"st.w r14, 76[sp]\", operands);
output_asm_insn (\"st.w r15, 72[sp]\", operands);
output_asm_insn (\"st.w r16, 68[sp]\", operands);
output_asm_insn (\"st.w r17, 64[sp]\", operands);
output_asm_insn (\"st.w r18, 60[sp]\", operands);
output_asm_insn (\"st.w r19, 56[sp]\", operands);
output_asm_insn (\"st.w r20, 52[sp]\", operands);
output_asm_insn (\"st.w r21, 48[sp]\", operands);
output_asm_insn (\"st.w r22, 44[sp]\", operands);
output_asm_insn (\"st.w r23, 40[sp]\", operands);
output_asm_insn (\"st.w r24, 36[sp]\", operands);
output_asm_insn (\"st.w r25, 32[sp]\", operands);
output_asm_insn (\"st.w r26, 28[sp]\", operands);
output_asm_insn (\"st.w r27, 24[sp]\", operands);
output_asm_insn (\"st.w r28, 20[sp]\", operands);
output_asm_insn (\"st.w r29, 16[sp]\", operands);
}
return \"\";
}"
[(set (attr "length")
(if_then_else (ne (symbol_ref "TARGET_LONG_CALLS") (const_int 0))
(const_int 4)
(const_int 62)
))
(set_attr "cc" "clobber")])
(define_insn "_save_all_interrupt"
[(unspec_volatile [(const_int 0)] 0)]
"TARGET_V850 && ! TARGET_LONG_CALLS"
"jarl __save_all_interrupt,r10"
[(set_attr "length" "4")
(set_attr "cc" "clobber")])
;; Restore all registers saved when an interrupt function makes a call.
;; UNSPEC_VOLATILE is considered to use and clobber all hard registers and
;; all of memory. This blocks insns from being moved across this point.
;; This is needed because the rest of the compiler is not ready to handle
;; insns this complicated.
(define_insn "callt_restore_all_interrupt"
[(unspec_volatile [(const_int 0)] 1)]
"TARGET_V850E && !TARGET_DISABLE_CALLT"
"callt ctoff(__callt_restore_all_interrupt)"
[(set_attr "length" "2")
(set_attr "cc" "none")])
(define_insn "restore_all_interrupt"
[(unspec_volatile [(const_int 0)] 1)]
""
"*
{
if (TARGET_PROLOG_FUNCTION && !TARGET_LONG_CALLS)
return \"jarl __restore_all_interrupt,r10\";
if (TARGET_EP)
{
output_asm_insn (\"mov ep, r1\", operands);
output_asm_insn (\"mov sp, ep\", operands);
output_asm_insn (\"sld.w 116[ep], r31\", operands);
output_asm_insn (\"sld.w 112[ep], r2\", operands);
output_asm_insn (\"sld.w 108[ep], gp\", operands);
output_asm_insn (\"sld.w 104[ep], r6\", operands);
output_asm_insn (\"sld.w 100[ep], r7\", operands);
output_asm_insn (\"sld.w 96[ep], r8\", operands);
output_asm_insn (\"sld.w 92[ep], r9\", operands);
output_asm_insn (\"sld.w 88[ep], r11\", operands);
output_asm_insn (\"sld.w 84[ep], r12\", operands);
output_asm_insn (\"sld.w 80[ep], r13\", operands);
output_asm_insn (\"sld.w 76[ep], r14\", operands);
output_asm_insn (\"sld.w 72[ep], r15\", operands);
output_asm_insn (\"sld.w 68[ep], r16\", operands);
output_asm_insn (\"sld.w 64[ep], r17\", operands);
output_asm_insn (\"sld.w 60[ep], r18\", operands);
output_asm_insn (\"sld.w 56[ep], r19\", operands);
output_asm_insn (\"sld.w 52[ep], r20\", operands);
output_asm_insn (\"sld.w 48[ep], r21\", operands);
output_asm_insn (\"sld.w 44[ep], r22\", operands);
output_asm_insn (\"sld.w 40[ep], r23\", operands);
output_asm_insn (\"sld.w 36[ep], r24\", operands);
output_asm_insn (\"sld.w 32[ep], r25\", operands);
output_asm_insn (\"sld.w 28[ep], r26\", operands);
output_asm_insn (\"sld.w 24[ep], r27\", operands);
output_asm_insn (\"sld.w 20[ep], r28\", operands);
output_asm_insn (\"sld.w 16[ep], r29\", operands);
output_asm_insn (\"mov r1, ep\", operands);
}
else
{
output_asm_insn (\"ld.w 116[sp], r31\", operands);
output_asm_insn (\"ld.w 112[sp], r2\", operands);
output_asm_insn (\"ld.w 108[sp], gp\", operands);
output_asm_insn (\"ld.w 104[sp], r6\", operands);
output_asm_insn (\"ld.w 100[sp], r7\", operands);
output_asm_insn (\"ld.w 96[sp], r8\", operands);
output_asm_insn (\"ld.w 92[sp], r9\", operands);
output_asm_insn (\"ld.w 88[sp], r11\", operands);
output_asm_insn (\"ld.w 84[sp], r12\", operands);
output_asm_insn (\"ld.w 80[sp], r13\", operands);
output_asm_insn (\"ld.w 76[sp], r14\", operands);
output_asm_insn (\"ld.w 72[sp], r15\", operands);
output_asm_insn (\"ld.w 68[sp], r16\", operands);
output_asm_insn (\"ld.w 64[sp], r17\", operands);
output_asm_insn (\"ld.w 60[sp], r18\", operands);
output_asm_insn (\"ld.w 56[sp], r19\", operands);
output_asm_insn (\"ld.w 52[sp], r20\", operands);
output_asm_insn (\"ld.w 48[sp], r21\", operands);
output_asm_insn (\"ld.w 44[sp], r22\", operands);
output_asm_insn (\"ld.w 40[sp], r23\", operands);
output_asm_insn (\"ld.w 36[sp], r24\", operands);
output_asm_insn (\"ld.w 32[sp], r25\", operands);
output_asm_insn (\"ld.w 28[sp], r26\", operands);
output_asm_insn (\"ld.w 24[sp], r27\", operands);
output_asm_insn (\"ld.w 20[sp], r28\", operands);
output_asm_insn (\"ld.w 16[sp], r29\", operands);
}
output_asm_insn (\"addi 120, sp, sp\", operands);
return \"\";
}"
[(set (attr "length")
(if_then_else (ne (symbol_ref "TARGET_LONG_CALLS") (const_int 0))
(const_int 4)
(const_int 62)
))
(set_attr "cc" "clobber")])
(define_insn "_restore_all_interrupt"
[(unspec_volatile [(const_int 0)] 1)]
"TARGET_V850 && ! TARGET_LONG_CALLS"
"jarl __restore_all_interrupt,r10"
[(set_attr "length" "4")
(set_attr "cc" "clobber")])
;; Save r6-r9 for a variable argument function
(define_insn "save_r6_r9_v850e"
[(set (mem:SI (reg:SI 3)) (reg:SI 6))
(set (mem:SI (plus:SI (reg:SI 3) (const_int 4))) (reg:SI 7))
(set (mem:SI (plus:SI (reg:SI 3) (const_int 8))) (reg:SI 8))
(set (mem:SI (plus:SI (reg:SI 3) (const_int 12))) (reg:SI 9))
]
"TARGET_PROLOG_FUNCTION && TARGET_V850E && !TARGET_DISABLE_CALLT"
"callt ctoff(__callt_save_r6_r9)"
[(set_attr "length" "2")
(set_attr "cc" "none")])
(define_insn "save_r6_r9"
[(set (mem:SI (reg:SI 3)) (reg:SI 6))
(set (mem:SI (plus:SI (reg:SI 3) (const_int 4))) (reg:SI 7))
(set (mem:SI (plus:SI (reg:SI 3) (const_int 8))) (reg:SI 8))
(set (mem:SI (plus:SI (reg:SI 3) (const_int 12))) (reg:SI 9))
(clobber (reg:SI 10))]
"TARGET_PROLOG_FUNCTION && ! TARGET_LONG_CALLS"
"jarl __save_r6_r9,r10"
[(set_attr "length" "4")
(set_attr "cc" "clobber")])
Go to most recent revision | Compare with Previous | Blame | View Log