URL
https://opencores.org/ocsvn/sd_card_controller/sd_card_controller/trunk
Subversion Repositories sd_card_controller
[/] [sd_card_controller/] [trunk/] [bench/] [verilog/] [edge_detect_tb.sv] - Rev 9
Go to most recent revision | Compare with Previous | Blame | View Log
//////////////////////////////////////////////////////////////////////
//// ////
//// WISHBONE SD Card Controller IP Core ////
//// ////
//// edge_detect_tb.sv ////
//// ////
//// This file is part of the WISHBONE SD Card ////
//// Controller IP Core project ////
//// http://opencores.org/project,sd_card_controller ////
//// ////
//// Description ////
//// testbench for edge_detect module ////
//// ////
//// Author(s): ////
//// - Marek Czerski, ma.czerski@gmail.com ////
//// ////
//////////////////////////////////////////////////////////////////////
//// ////
//// Copyright (C) 2013 Authors ////
//// ////
//// This source file may be used and distributed without ////
//// restriction provided that this copyright statement is not ////
//// removed from the file and that any derivative work contains ////
//// the original copyright notice and the associated disclaimer. ////
//// ////
//// This source file is free software; you can redistribute it ////
//// and/or modify it under the terms of the GNU Lesser General ////
//// Public License as published by the Free Software Foundation; ////
//// either version 2.1 of the License, or (at your option) any ////
//// later version. ////
//// ////
//// This source is distributed in the hope that it will be ////
//// useful, but WITHOUT ANY WARRANTY; without even the implied ////
//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR ////
//// PURPOSE. See the GNU Lesser General Public License for more ////
//// details. ////
//// ////
//// You should have received a copy of the GNU Lesser General ////
//// Public License along with this source; if not, download it ////
//// from http://www.opencores.org/lgpl.shtml ////
//// ////
//////////////////////////////////////////////////////////////////////
module edge_detect_tb();
parameter TCLK = 20; // 50 MHz -> timescale 1ns
reg rst;
reg clk;
reg sig;
wire rise;
wire fall;
edge_detect edge_detect_dut(
.rst(rst),
.clk(clk),
.sig(sig),
.rise(rise),
.fall(fall)
);
// Generating clk clock
always
begin
clk=0;
forever #(TCLK/2) clk = ~clk;
end
initial
begin
rst = 1;
sig = 0;
#(3.2*TCLK);
rst = 0;
$display("edge_detect_tb start ...");
//one cycle sig
sig = 1;
#TCLK;
assert(rise == 1);
assert(fall == 0);
sig = 0;
#TCLK;
assert(rise == 0);
assert(fall == 1);
#TCLK;
assert(rise == 0);
assert(fall == 0);
#TCLK;
assert(rise == 0);
assert(fall == 0);
//multiple cycles sig
sig = 1;
#TCLK;
assert(rise == 1);
assert(fall == 0);
#TCLK;
assert(rise == 0);
assert(fall == 0);
#TCLK;
assert(rise == 0);
assert(fall == 0);
sig = 0;
#TCLK;
assert(rise == 0);
assert(fall == 1);
#TCLK;
assert(rise == 0);
assert(fall == 0);
#TCLK;
assert(rise == 0);
assert(fall == 0);
#(10*TCLK) $display("edge_detect_tb finish ...");
$finish;
end
endmodule
Go to most recent revision | Compare with Previous | Blame | View Log