URL
https://opencores.org/ocsvn/sdr_ctrl/sdr_ctrl/trunk
Subversion Repositories sdr_ctrl
[/] [sdr_ctrl/] [trunk/] [synth/] [constraints/] [sdrc_synth.sdc] - Rev 72
Go to most recent revision | Compare with Previous | Blame | View Log
# Syntheis command format
#"-from" objects must be of type clock (c:), port (p:), inst (i:), or pin (t:)
#
#166MHz - Application CLOCK
#set APP_CLK_PER 6.0
#set APP_CLK_HALF_PER [expr APP_CLK_PER]
#100MHz - SDRAM Clock
#set SDR_CLK_PER 10.0
#set SDI_CLK_HALF_PER [expr $SDR_CLK_PERR/2]
####################################
# Clear Application Clock : 200Mhz
####################################
create_clock -name wb_clk_i -period 6 -waveform {0 3} p:wb_clk_i
#set_clock_uncertainty -max 0.2 [get_clocks wb_clk_i]
#set_clock_uncertainty -min 0.1 [get_clocks wb_clk_i]
#set_clock_latency 2.0 [get_clocks wb_clk_i]
########################################
# Create SDRAM Clock to 100Mhz
########################################
create_clock -name sdram_clk -period 10 -waveform {0 5} p:sdram_clk
#set_clock_uncertainty -max 0.2 [get_clocks sdram_clk]
#set_clock_uncertainty -min 0.1 [get_clocks sdram_clk]
#set_clock_latency 2.0 [get_clocks sdram_clk]
###########################################
# Set false path between application and SDRAM Clock
##########################################
set_false_path -from c:wb_clk_i -to c:sdram_clk
set_false_path -to c:wb_clk_i -from c:sdram_clk
########################################
# Set false path through reset
########################################
set_false_path -from p:wb_rst_i
set_false_path -from p:sdram_resetn
########################################
# Set False path to all the configuration input
########################################
#set_false_path -from p:{cfg_colbits[*] cfg_req_depth[*] cfg_sdr_cas[*]}
#set_false_path -from p:{cfg_sdr_en cfg_sdr_mode_reg[*] cfg_sdr_rfmax[*]]
#set_false_path -from p:{cfg_sdr_rfsh[*] cfg_sdr_tras_d[*] cfg_sdr_trcar_d[*]}
#set_false_path -from p:{cfg_sdr_trcd_d[*] cfg_sdr_trp_d[*] cfg_sdr_twr_d[*]}
#set_false_path -from p:cfg_sdr_width[*]
########################################
# Application Port Input Contraints
# Since Application Signal will be internally terminated and
# there is will not be any additional FPGA pad delay of 3ns.
# So input delay constraint changed form 3ns to 0ns
#
#######################################
#set_input_delay 3 -max [ wb_stb_i wb_addr_i wb_we_i wb_dat_i wb_sel_i wb_cyc_i wb_cti_i] -clock wb_clk_i
set_input_delay 0 -max { wb_stb_i wb_addr_i[*] wb_we_i wb_dat_i[*] wb_sel_i[*] wb_cyc_i wb_cti_i[*]} -clock wb_clk_i
set_input_delay 0.5 -min { wb_stb_i wb_addr_i[*] wb_we_i wb_dat_i[*] wb_sel_i[*] wb_cyc_i wb_cti_i[*]} -clock wb_clk_i
########################################
# Application Port Output Contraints
# Since Application Signal will be internally terminstated and
# there will not be addiitional FPGA pad delay of 3ns.
# So output delat contraints are changed from 3ns to 0ns
#######################################
#set_output_delay 3 -max [ wb_ack_o wb_dat_o ] -clock wb_clk_i
set_output_delay 0 -max wb_ack_o -clock wb_clk_i
set_output_delay 3 -max {wb_dat_o[*]} -clock wb_clk_i
set_output_delay 0.5 -min wb_ack_o -clock wb_clk_i
set_output_delay 0.5 -min {wb_dat_o[*]} -clock wb_clk_i
#######################################
# SDRAM Input Contraints
# 10 - 2 = 8ns
#######################################
set_input_delay 5 -max {sdr_dq[*]} -clock sdram_clk
set_input_delay 0.5 -min {sdr_dq[*]} -clock sdram_clk
#######################################
# Set the SDRAM Output delay constraints
#######################################
set_output_delay 5 -max { sdr_cs_n sdr_cke sdr_ras_n sdr_cas_n sdr_we_n sdr_dqm[*] sdr_ba[*] sdr_addr[*] sdr_dq[*] } -clock sdram_clk
set_output_delay -2 -min { sdr_cs_n sdr_cke sdr_ras_n sdr_cas_n sdr_we_n sdr_dqm[*] sdr_ba[*] sdr_addr[*] sdr_dq[*] } -clock sdram_clk
########################################
# Misc
#########################################
set_output_delay 5 -max { sdr_init_done } -clock sdram_clk
set_output_delay -2 -min { sdr_init_done } -clock sdram_clk
Go to most recent revision | Compare with Previous | Blame | View Log