OpenCores
URL https://opencores.org/ocsvn/simple_spi/simple_spi/trunk

Subversion Repositories simple_spi

[/] [simple_spi/] [trunk/] [bench/] [verilog/] [tst_bench_top.v] - Rev 10

Compare with Previous | Blame | View Log

/////////////////////////////////////////////////////////////////////
////                                                             ////
////  simple_spi ('HC11 compatible) testbench                    ////
////                                                             ////
////  Author: Richard Herveille                                  ////
////          richard@asics.ws                                   ////
////          www.asics.ws                                       ////
////                                                             ////
////////////////////////////////////////////////////////////////////
////                                                             ////
//// Copyright (C) 2004 Richard Herveille                        ////
////                    richard@asics.ws                         ////
////                                                             ////
//// This source file may be used and distributed without        ////
//// restriction provided that this copyright statement is not   ////
//// removed from the file and that any derivative work contains ////
//// the original copyright notice and the associated disclaimer.////
////                                                             ////
////     THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY     ////
//// EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED   ////
//// TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS   ////
//// FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL THE AUTHOR      ////
//// OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,         ////
//// INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES    ////
//// (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE   ////
//// GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR        ////
//// BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF  ////
//// LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT  ////
//// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT  ////
//// OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE         ////
//// POSSIBILITY OF SUCH DAMAGE.                                 ////
////                                                             ////
/////////////////////////////////////////////////////////////////////
 
//  CVS Log
//
//  $Id: tst_bench_top.v,v 1.1 2004-02-28 16:01:47 rherveille Exp $
//
//  $Date: 2004-02-28 16:01:47 $
//  $Revision: 1.1 $
//  $Author: rherveille $
//  $Locker:  $
//  $State: Exp $
//
// Change History:
//               $Log: not supported by cvs2svn $
//
//
 
`include "timescale.v"
 
module tst_bench_top();
 
	//
	// wires && regs
	//
	reg  clk;
	reg  rstn;
 
	wire [31:0] adr;
	wire [ 7:0] dat_i, dat_o;
	wire we;
	wire stb;
	wire cyc;
	wire ack;
	wire inta;
 
	reg [1:0] cpol, cpha;
	reg [2:0] e;
 
	wire sck, mosi, miso;
	reg [7:0] q;
 
	parameter SPCR = 2'b00;
	parameter SPSR = 2'b01;
	parameter SPDR = 2'b10;
	parameter SPER = 2'b11;
 
	//
	// Module body
	//
	integer n;
 
	// generate clock
	always #5 clk = ~clk;
 
	// hookup wishbone master model
	wb_master_model #(8, 32) u0 (
		.clk (clk),
		.rst (rstn),
		.adr (adr),
		.din (dat_i),
		.dout(dat_o),
		.cyc (cyc),
		.stb (stb),
		.we  (we),
		.sel (),
		.ack (ack),
		.err (1'b0),
		.rty (1'b0)
	);
 
	// hookup spi core
	simple_spi_top spi_top (
		// wishbone interface
		.clk_i (clk),
		.rst_i (rstn),
		.cyc_i (cyc),
		.stb_i (stb),
		.adr_i (adr[1:0]),
		.we_i  (we),
		.dat_i (dat_o),
		.dat_o (dat_i),
		.ack_o (ack),
		.inta_o(inta),
 
		.sck_o (sck),
		.mosi_o(mosi),
		.miso_i(miso)
	);
 
	// hookup spi slave model
	spi_slave_model spi_slave (
		.csn(1'b0),
		.sck(sck),
		.di(mosi),
		.do(miso)
	);
 
	initial
	  begin
	      `ifdef WAVES
	         $shm_open("waves");
	         $shm_probe("AS",tst_bench_top,"AS");
	         $display("INFO: Signal dump enabled ...\n\n");
	      `endif
 
//	      force spi_slave.debug = 1'b1; // enable spi_slave debug information
	      force spi_slave.debug = 1'b0; // disable spi_slave debug information
 
	      $display("\nstatus: %t Testbench started\n\n", $time);
 
 
	      // initially values
	      clk = 0;
 
	      // reset system
	      rstn = 1'b1; // negate reset
	      #2;
	      rstn = 1'b0; // assert reset
	      repeat(1) @(posedge clk);
	      rstn = 1'b1; // negate reset
 
	      $display("status: %t done reset", $time);
 
	      @(posedge clk);
 
	      //
	      // program core
	      //
	      for (cpol=0; cpol<=1; cpol=cpol+1)
	      for (cpha=0; cpha<=1; cpha=cpha+1) 
	      for (e=0; e<=3; e=e+1)
	      begin
	          //set cpol/cpha in spi slave model
	          force spi_slave.cpol=cpol[0];
	          force spi_slave.cpha=cpha[0];
	          $display("cpol:%b, cpha:%b, e:%b", cpol[0],cpha[0],e[1:0]);
 
	          // program internal registers
 
	          // load control register
	          u0.wb_write(1, SPCR, {4'b0101,cpol[0],cpha[0],e[1:0]} );
	          //verify control register
	          u0.wb_cmp  (0, SPCR, {4'b0101,cpol[0],cpha[0],e[1:0]} );
 
 
	          // load extended control register
	          u0.wb_write(1,SPER,8'h0);
	          //verify extended control register
	          u0.wb_cmp (0,SPER,8'h0);
 
	          //fill memory
	          for(n=0;n<8;n=n+1) begin
	            u0.wb_write(1,SPDR,{cpol[0],cpha[0],e[1:0],n[3:0]});
	            //wait for transfer to finish
	            u0.wb_read(1,SPSR,q);
	            while(~q[7]) u0.wb_read(1,SPSR,q);
	            //clear 'spif' bit
	            u0.wb_write(1,SPSR,8'h80);
	          end
 
	          //verify memory
	          for(n=0;n<8;n=n+1) begin
	            u0.wb_write(1,SPDR,~n);
	            //wait for transfer to finish
	            u0.wb_read(1,SPSR,q);
	            while(~q[7]) u0.wb_read(1,SPSR,q);
	            //clear 'spif' bit
	            u0.wb_write(1,SPSR,8'h80);
	            //verify memory content
	            u0.wb_cmp(0,SPDR,{cpol[0],cpha[0],e[1:0],n[3:0]});
	          end
	      end
 
	      // check tip bit
//	      u0.wb_read(1, SR, q);
//	      while(q[1])
//	      u0.wb_read(1, SR, q); // poll it until it is zero
//	      $display("status: %t tip==0", $time);
 
	      #250000; // wait 250us
	      $display("\n\nstatus: %t Testbench done", $time);
	      $finish;
	  end
 
endmodule
 
 

Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.