OpenCores
URL https://opencores.org/ocsvn/sincos/sincos/trunk

Subversion Repositories sincos

[/] [sincos/] [trunk/] [vhdl/] [tb/] [clk_rst/] [clk_rst.vhd] - Rev 7

Compare with Previous | Blame | View Log

--! @file
--! @brief clock for simulation with selectable frequency and reset with selectable width.
 
-- (c) jul 2007... Gerhard Hoffmann  opencores@hoffmann-hochfrequenz.de
-- Published under BSD license
-- V1.0  first published version
--
--! @details Solution to an everyday problem.
--! This module produces a clock for a simulation with selectable frequency
--! and a reset signal with selectable width. The duty cycle is 1:1.
--! The reset is active from the beginning and removed synchronously shortly
--! after a rising clock edge.
--! setting verbose to true gives some diagnostics.
--
-- Make sure that your simulator has a time resolution of at least 1 ps.
-- For modelsim, this is set up by the various modelsim.ini files
-- and/or the project file (foobar.mpf)
 
 
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
use ieee.math_real.all;
 
 
 
entity clk_rst is
  generic (
    verbose:         boolean := false;
    clock_frequency: real    := 100.0e6;  -- 100 MHz
    min_resetwidth:  time    := 12 ns     -- minimum resetwidth, is synchronized to clk  
	);
  port (  
    clk: out std_logic;
    rst: out std_logic
  );  
end entity clk_rst;
 
 
architecture rtl of clk_rst is
 
 
-- The clock frequency is given in Hz in floating point format.
-- compute the equivalent half cycle time.
 
function frequency2halfcycle(f: real; verbose: boolean) return time is
 
  variable picoseconds: real; 
  variable retval:      time;
 
begin
  assert f > 1.0e-10 
    report "clk_and_rst.vhd: requested clock frequency is unreasonably low or even negative - danger of 1/0.0"
    severity error;
 
  picoseconds := (0.5 / f ) / 1.0e-12;
  retval := integer(picoseconds) * 1 ps;
 
  if verbose then
    report "function frequency2halfcycle() in clk_rst.vhd: picoseconds = " & real'image(picoseconds);
    report "halfcycle = " & time'image(retval);
  end if; 
 
  assert retval > 0 ps 
    report "frequency2halfcycle(): length of halfcycle truncated to 0 ps. "
         & "Set simulator resolution to 1 ps or smaller in modelsim.ini, foobar.mpf or whatever your simulator uses"
    severity error;
 
  return retval;
end;
 
 
signal iclk:      std_logic := '0';  -- entity-internal clk and rst
signal irst:      std_logic := '1';
 
constant halfcycle: time    := frequency2halfcycle(clock_frequency, verbose);
 
----------------------------------------------------------------------------------------------------   
begin
 
--
-- generate the internal system clock
 
u_sysclock: process is
begin
   wait for halfcycle;
   iclk <= '1';
 
   wait for halfcycle;
   iclk <= '0';
end process u_sysclock;
 
 
--
-- generate internal reset
 
u_rst: process is
begin
   irst <= '1';
   wait for min_resetwidth;
   wait until rising_edge(iclk);
   irst <= '0';
   wait;    -- forever
end process u_rst;
 
-- make the local signals public
 
clk <= iclk;
rst <= irst;
 
end architecture rtl;
 
 

Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.