Subversion Repositories socgen

reg              rx_parity_enable;               // 0 = no parity bit sent; 1= parity bit sent
reg              rx_parity    ; 
reg              rx_force_parity    ; 
reg              rx_stop_value;                  // value out for stop bit 
reg              rx_start_detect;
reg [7:0]        rx_shift_buffer;
reg              rx_parity_calc;
reg              rx_parity_samp;
reg              rx_parity_error;
reg              rx_frame_err;
reg              exp_rx_frame_err;
reg              mask_rx_frame_err;
   
   
reg              rx_frame_rdy;
                         
 
reg              rx_baud_enable;   
wire             rx_stop_cnt;
wire             rx_last_cnt;
wire [7:0]       next_rx_shift_buffer;   
wire             next_rx_parity_calc;  
wire             next_rx_parity_samp;   
wire             next_rx_frame_err;
   
   
reg              rxd_pad_sig;
reg [1:0]        rx_rdy_del;   
reg [SIZE-1:0]   rx_baudgen;
reg              edge_enable;
reg  [SIZE-1:0]  divide_cnt;


   wire xmit_enable;
reg         txd_parity_enable; 
reg         txd_force_parity; 
reg         txd_parity;
reg         txd_load;         
reg         txd_break;                  
reg  [7:0]  txd_data_in;                        
wire        txd_buffer_empty;                
   
   
//
//   watch for start bit
//  

   
   
always@(posedge clk)
  if(reset)
  begin
   rx_parity_enable     <= 1'b0; 
   rx_parity            <= 1'b0;
   rx_force_parity      <= 1'b0;
   rx_stop_value        <= 1'b1;    
   exp_rx_frame_err     <= 1'b0; 
   exp_rx_parity_err    <= 1'b0; 
   exp_rx_shift_buffer  <= 8'h00;
   mask_rx_frame_err    <= 1'b0; 
   mask_rx_parity_err   <= 1'b0; 
   mask_rx_shift_buffer <= 8'h00;     
   txd_parity_enable    <= 1'b0;
   txd_force_parity     <= 1'b0;
   txd_parity           <= 1'b0;
   txd_load             <= 1'b0;
   txd_break            <= 1'b0;                 
   txd_data_in          <= 8'h00;                     
  end


   


wire    prb_rx_frame_err; 

assign  prb_rx_shift_buffer =  rx_shift_buffer;  
assign  prb_rx_frame_err    =  rx_frame_err; 
assign  prb_rx_parity_err   =  rx_parity_error;    
assign  drv_rx_shift_buffer =  8'bzzzzzzzz;
assign  drv_rx_parity_err   =  1'bz;

/*
io_probe_def 
#(.MESG   ("uart data receive error"),
  .WIDTH  (8)
  )
rx_shift_buffer_prb   
(
  .clk           ( clk ),
  .drive_value   ( drv_rx_shift_buffer ), 
  .expected_value( exp_rx_shift_buffer ),
  .mask          ( mask_rx_shift_buffer),
  .signal        ( prb_rx_shift_buffer )
);      


io_probe_def 
#(.MESG   ("uart parity error"))
rx_parity_err_prb   
(
  .clk           ( clk ),
  .drive_value   ( drv_rx_parity_err ), 
  .expected_value( exp_rx_parity_err ),
  .mask          ( mask_rx_parity_err),
  .signal        ( prb_rx_parity_err )
);      

*/


 

 
   



   
always@(posedge clk)
if(reset)                 rx_baudgen <= CLKCNT;
else 
if(rx_baudgen == 4'h0)    rx_baudgen <= CLKCNT;
else                      rx_baudgen <= rx_baudgen - 1'h1;  


   
always@(posedge clk)
if(reset)                 edge_enable <= 1'b0;
else                      edge_enable <= (rx_baudgen == {SIZE{1'b0}});
  




   
always@(posedge clk)
if(reset)                                              rxd_pad_sig <= 1'b1;
else                                                   rxd_pad_sig <= txd_in;
   

always@(posedge clk)
if(reset)                                              rx_start_detect <= 1'b0;
else
if(rx_start_detect)  
  begin
    if(rx_stop_cnt  && edge_enable )                      rx_start_detect <= !rxd_pad_sig;
    else
    if(rx_last_cnt)                                       rx_start_detect <= 1'b0;
    else                                               rx_start_detect <= 1'b1;
  end
else
if(!rxd_pad_sig )                                      rx_start_detect <= 1'b1;
else                                                   rx_start_detect <= rx_start_detect;


always@(posedge clk)
  if(reset)
    begin
    rx_frame_rdy <= 1'b0;
    rx_rdy_del   <= 2'b00;
    end
  else
    begin
    rx_frame_rdy <=  rx_rdy_del[1] ;
    rx_rdy_del   <=  {rx_rdy_del[0],rx_last_cnt};
    end
   

uart_model_serial_rcvr
#(.WIDTH(8),  .SIZE(4) )  
serial_rcvr
 (
     .clk              ( clk                ), 
     .reset            ( reset              ),
     .edge_enable      ( rx_baud_enable        ),                 
     .parity_enable    ( rx_parity_enable      ),               
     .parity_type      ( {rx_force_parity, rx_parity }    ),                 
     .stop_cnt         ( rx_stop_cnt           ),                  
     .last_cnt         ( rx_last_cnt           ),                  
     .stop_value       ( rx_stop_value         ),                  
     .ser_in           ( txd_in             ),                      
     .shift_buffer     ( next_rx_shift_buffer  ),
     .parity_calc      ( next_rx_parity_calc   ),
     .parity_samp      ( next_rx_parity_samp   ),
     .frame_err        ( next_rx_frame_err     )
);  
   


   




always@(posedge clk)
  if( reset || (!rx_start_detect))    rx_baud_enable    <= 1'b0;
  else
  if(!edge_enable)                    rx_baud_enable    <= 1'b0;  
  else                                rx_baud_enable    <=  ( divide_cnt == 4'b1000 );       



always@(posedge clk)
  if( reset || (!rx_start_detect))    divide_cnt    <= 4'b1111;
  else
  if(!edge_enable)                    divide_cnt    <= divide_cnt;
  else
  if(!(|divide_cnt))                  divide_cnt    <= 4'b1111;
  else                                divide_cnt    <= divide_cnt - 'b1;





   
always@(posedge clk)
  if(reset)
     begin
          rx_shift_buffer   <=  8'h00;  
          rx_parity_calc    <=  1'b0;
          rx_parity_samp    <=  1'b0;
          rx_parity_error   <=  1'b0;
          rx_frame_err      <=  1'b0;
     end
  else
  if(rx_last_cnt )
      begin
          rx_shift_buffer   <=  next_rx_shift_buffer;  
          rx_parity_calc    <=  next_rx_parity_calc;
          rx_parity_samp    <=  next_rx_parity_samp;
          rx_parity_error   <=  (next_rx_parity_samp ^ next_rx_parity_calc) && rx_parity_enable;
          rx_frame_err      <=  next_rx_frame_err;
      end
  else
     begin
          rx_shift_buffer   <=  rx_shift_buffer;  
          rx_parity_calc    <=  rx_parity_calc;
          rx_parity_samp    <=  rx_parity_samp;
          rx_parity_error   <=  rx_parity_error;
          rx_frame_err      <=  rx_frame_err;
      end
  

/////////////////  Xmit





   

   



uart_model_divider
#(.SIZE(4))  
x_divider  (
         .clk             ( clk             ),
         .reset           ( reset           ),
         .divider_in      ( 4'b1111         ),
         .enable          ( edge_enable     ),
         .divider_out     ( xmit_enable     )
         );



   

uart_model_serial_xmit
serial_xmit (
               .clk              ( clk                              ),
               .reset            ( reset                            ),
               .edge_enable      ( xmit_enable                      ),                 
               .parity_enable    ( txd_parity_enable                ),               
               .two_stop_enable  ( 1'b0                             ),             
               .parity_type      ( {txd_force_parity, txd_parity }  ),                 
               .load             ( txd_load                         ),                        
               .start_value      ( 1'b0                             ),                 
               .stop_value       (!txd_break                        ),                  
               .data             ( txd_data_in                      ),                        
               .buffer_empty     ( txd_buffer_empty                 ),                
               .ser_out          ( rxd_out                          )            
                );