OpenCores
URL https://opencores.org/ocsvn/socgen/socgen/trunk

Subversion Repositories socgen

[/] [socgen/] [trunk/] [tools/] [busdefs/] [gen_busdef] - Rev 135

Compare with Previous | Blame | View Log

eval 'exec `which perl` -S $0 ${1+"$@"}'
   if 0;

#/****************************************************************************/
#/*                                                                          */
#/*   SOCGEN Design for Reuse toolset                                        */
#/*                                                                          */
#/*   Version 1.0.0                                                          */
#/*                                                                          */
#/*   Author(s):                                                             */
#/*      - John Eaton, z3qmtr45@gmail.com                                    */
#/*                                                                          */
#/****************************************************************************/
#/*                                                                          */
#/*                                                                          */
#/*             Copyright 2016 John T Eaton                                  */ 
#/*                                                                          */
#/* Licensed under the Apache License, Version 2.0 (the "License");          */
#/* you may not use this file except in compliance with the License.         */
#/* You may obtain a copy of the License at                                  */
#/*                                                                          */
#/*    http://www.apache.org/licenses/LICENSE-2.0                            */
#/*                                                                          */
#/* Unless required by applicable law or agreed to in writing, software      */
#/* distributed under the License is distributed on an "AS IS" BASIS,        */
#/* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. */
#/* See the License for the specific language governing permissions and      */
#/* limitations under the License.                                           */
#/*                                                                          */
#/*                                                                          */
#/****************************************************************************/

############################################################################
# General PERL config
############################################################################
use Getopt::Long;
use English;
use File::Basename;
use Cwd;
use Scalar::Util qw(looks_like_number);
use XML::LibXML;
use lib './tools';
use sys::lib;
use yp::lib;
use BerkeleyDB;


$OUTPUT_AUTOFLUSH = 1; # set autoflush of stdout to TRUE.


############################################################################
### Process the options
############################################################################
Getopt::Long::config("require_order", "prefix=-");
GetOptions("h","help",
           "vendor=s" => \$vendor,
           "library=s" => \$library,
           "version=s" => \$version,
           "component=s" => \$component,
           "debug","verbose"
) || die "(use '$program_name -h' for help)";


##############################################################################
## Help option
##############################################################################
if ( $opt_h  or $opt_help  ) 
  { print "\n gen_busdef    -vendor vendor_name -library library_name  -component component_name  -version version_name   ";
    print "\n";
    exit 1;
  }


#############################################################################
## 
## 
#############################################################################


$home = cwd();


my $variant;
my $parser = XML::LibXML->new();
#print "\n GEN_busdef     $vendor $library $component $version         \n";



my $io_ports  = yp::lib::get_io_ports() ;




my $path  = "${io_ports}";
   mkdir $path,0755             unless( -e $path );
   $path  = "${io_ports}/${vendor}__${library}";
   mkdir $path,0755             unless( -e $path );
   $path  = "${io_ports}/${vendor}__${library}/${component}";
   mkdir $path,0755             unless( -e $path );
   $filename ="${io_ports}/${vendor}__${library}/${component}/${component}_${version}_ABSDEF.dbm";

   if(-e ${filename} )
     {
     print " $filename Exists, exiting \n";
     exit 0;
     }


     $absDef_db   = new BerkeleyDB::Hash( -Filename => $filename, -Flags => DB_CREATE ) or die "Cannot open file: $!";




          my $spirit_file       = yp::lib::find_ipxact_abstractionDefinition($vendor,$library,$component,$version);

#          print "\tFilename:  ${spirit_file}\n";
          unless ($spirit_file) {print "Error absDef   $vendor $library $component  $version file does not exist";}

          my $spirit_absDef_file   = $parser->parse_file($spirit_file);
          foreach my $absDef ($spirit_absDef_file->findnodes("//ipxact:abstractionDefinition/ipxact:vendor")) 
                {
                my($bd_vendor)         = $absDef->findnodes('./text()')->to_literal ;
                my($bd_library)        = $absDef->findnodes('../ipxact:library/text()')->to_literal ;
                my($bd_name)           = $absDef->findnodes('../ipxact:name/text()')->to_literal ;
                my($bd_version)        = $absDef->findnodes('../ipxact:version/text()')->to_literal ;
   #             print "\tVLNV-ad     ${bd_vendor}_${bd_library}_${bd_name}_${bd_version}\n";

                my %systemGroupNames = ();


                foreach my $bus_type ($spirit_absDef_file->findnodes("//ipxact:abstractionDefinition/ipxact:busType")) 
                   {
                   my($bt_vendor)        = $bus_type->findnodes('./@vendor')->to_literal ;
                   my($bt_library)       = $bus_type->findnodes('./@library')->to_literal ;
                   my($bt_name)          = $bus_type->findnodes('./@name')->to_literal ;
                   my($bt_version)       = $bus_type->findnodes('./@version')->to_literal ;
#                   print "\tVLNV-bt     ${bt_vendor}_${bt_library}_${bt_name}_${bt_version}\n";

                   my $spirit_file       = yp::lib::find_ipxact_busDefinition($bt_vendor,$bt_library,$bt_name,$bt_version);

                   unless ($spirit_file) {print "ERROR: No bus definition  ${bd_vendor}:${bd_library}:${bd_name}:${bd_version}    \n";}
                   else
                     {
                     my $spirit_busDef_file   = $parser->parse_file($spirit_file);
                     foreach  my   $i_name ($spirit_busDef_file->findnodes("//ipxact:busDefinition/ipxact:systemGroupNames/ipxact:systemGroupName"))
                       {
                       my($sysgroup_name)       = $i_name ->findnodes('./text()')->to_literal;
   #                    print "\t     SystemGroup Name $sysgroup_name \n";
                       $systemGroupNames{$sysgroup_name} = 1;
                       }
                     }
                   } 

                foreach my $absDef ($spirit_absDef_file->findnodes("//ipxact:abstractionDefinition/ipxact:ports/ipxact:port/ipxact:logicalName")) 
                   {
                   my($logical_name)         = $absDef->findnodes('./text()')->to_literal ;
                   my($is_clock)             = $absDef->findnodes('../ipxact:wire/ipxact:qualifier/ipxact:isClock/text()')->to_literal ;
                   my($is_reset)             = $absDef->findnodes('../ipxact:wire/ipxact:qualifier/ipxact:isReset/text()')->to_literal ;
                   my($is_address)           = $absDef->findnodes('../ipxact:wire/ipxact:qualifier/ipxact:isAddress/text()')->to_literal ;
                   my($is_data)              = $absDef->findnodes('../ipxact:wire/ipxact:qualifier/ipxact:isData/text()')->to_literal ;
                   my($requires_driver)      = $absDef->findnodes('../ipxact:wire/ipxact:requiresDriver/text()')->to_literal ;
                   my($driver_type)          = $absDef->findnodes('../ipxact:wire/ipxact:requiresDriver/@ipxact:driverType')->to_literal ;
                   my($default_value)        = $absDef->findnodes('../ipxact:wire/ipxact:defaultValue/text()')->to_literal ;

#                   print "\nPort:  ${logical_name} ";


               my $Key = "port__${logical_name}"    ;
               my @info  = ("$logical_name","$is_clock","$is_reset","$is_address","$is_data","$requires_driver","$driver_type","$default_value"         );
               $absDef_db->db_put( $Key, join(':', @info) );




                   

                   my $master_presence;
                   my $master_width;
                   my $master_direction;

                   foreach my $onMaster ($spirit_absDef_file->findnodes("//ipxact:abstractionDefinition/ipxact:ports/ipxact:port/ipxact:logicalName[text() = '$logical_name']/../ipxact:wire/ipxact:onMaster/ipxact:direction")) 
                    {
                    $master_direction    = $onMaster->findnodes('./text()')->to_literal ;
                    $master_width       = $onMaster->findnodes('../ipxact:width/text()')->to_literal ;
                    $master_presence   = $onMaster->findnodes('../ipxact:presence/text()')->to_literal ;
                    #print "  onMaster presence    $master_presence \n";
                    #unless($master_width)     {$master_width = 1;}
                    #print "\n";
                    if($master_direction eq "in") {$master_direction = "input";}
                    if($master_direction eq "out"){$master_direction = "output";}


                    my $Key = "master__${logical_name}"    ;
                    my @info  = ("$logical_name","$master_presence","$master_width","$master_direction"     );
                    $absDef_db->db_put( $Key, join(':', @info) );
                   #print "PUT   $Key   @info   \n";
                    }

                   my $slave_presence;
                   my $slave_width;
                   my $slave_direction;

                   foreach my $onSlave ($spirit_absDef_file->findnodes("//ipxact:abstractionDefinition/ipxact:ports/ipxact:port/ipxact:logicalName[text() = '$logical_name']/../ipxact:wire/ipxact:onSlave/ipxact:direction")) 
                    {
                    $slave_direction  = $onSlave->findnodes('./text()')->to_literal ;
                    $slave_width      = $onSlave->findnodes('../ipxact:width/text()')->to_literal ;
                    $slave_presence   = $onSlave->findnodes('../ipxact:presence/text()')->to_literal ;
                    #print "  onSlave  presence    $slave_presence \n";
                    #unless($slave_width)     {$slave_width = 1;}
                    #print "\n";
                    if($slave_direction eq "in") {$slave_direction = "input";}
                    if($slave_direction eq "out"){$slave_direction = "output";}
                    my $Key = "slave__${logical_name}"    ;
                    my @info  = ("$logical_name","$slave_presence","$slave_width","$slave_direction"     );
                    $absDef_db->db_put( $Key, join(':', @info) );
                   #print "PUT   $Key   @info   \n";

                    }


                   my %systemGroupPresence= ();
                   my %systemGroupWidth= ();
                   my %systemGroupDirection= ();



                   foreach my $onSystem  ($spirit_absDef_file->findnodes("//ipxact:abstractionDefinition/ipxact:ports/ipxact:port/ipxact:logicalName[text() = '$logical_name']/../ipxact:wire/ipxact:onSystem/ipxact:group")) 
                    {
                    my($system_group)        = $onSystem->findnodes('./text()')->to_literal ;
                    my($presence)            = $onSystem->findnodes('../ipxact:presence/text()')->to_literal ;
                    my($width)               = $onSystem->findnodes('../ipxact:width/text()')->to_literal ;
                    my($direction)           = $onSystem->findnodes('../ipxact:direction/text()')->to_literal ;
                    #print "  onSystem Group       $system_group \n";
                    #print "  onSystem presence    $presence \n";
                    #unless($width)     {$width = 1;}
                    #print "\n";

                    my $Key = "system__${logical_name}"    ;
                    my @info  = ("$logical_name","$system_group","$presence","$width","$direction"     );
                    $absDef_db->db_put( $Key, join(':', @info) );
                   #print "PUT   $Key   @info   \n";

                    $systemGroupPresence{$system_group} =$presence  ;
                    $systemGroupWidth{$system_group} =$width  ;
                    $systemGroupDirection{$system_group} =$direction  ;
                    }
# insert DRC checks here

                   }
                }

$absDef_db->db_close();
          #print "\n";
          

        
      


Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.