Subversion Repositories socgen

eval 'exec `which perl` -S $0 ${1+"$@"}'
   if 0;
#/****************************************************************************/
#/*                                                                          */
#/*   SOCGEN Design for Reuse toolset                                        */
#/*                                                                          */
#/*   Version 1.0.0                                                          */
#/*                                                                          */
#/*   Author(s):                                                             */
#/*      - John Eaton, z3qmtr45@gmail.com                                    */
#/*                                                                          */
#/****************************************************************************/
#/*                                                                          */
#/*                                                                          */
#/*             Copyright 2016 John T Eaton                                  */ 
#/*                                                                          */
#/* Licensed under the Apache License, Version 2.0 (the "License");          */
#/* you may not use this file except in compliance with the License.         */
#/* You may obtain a copy of the License at                                  */
#/*                                                                          */
#/*    http://www.apache.org/licenses/LICENSE-2.0                            */
#/*                                                                          */
#/* Unless required by applicable law or agreed to in writing, software      */
#/* distributed under the License is distributed on an "AS IS" BASIS,        */
#/* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. */
#/* See the License for the specific language governing permissions and      */
#/* limitations under the License.                                           */
#/*                                                                          */
#/*                                                                          */
#/****************************************************************************/


############################################################################
# General PERL config
############################################################################
use Getopt::Long;
use English;
use File::Basename;
use Cwd;
use XML::LibXML;
use lib './tools';
use sys::lib;
use yp::lib;

$OUTPUT_AUTOFLUSH = 1; # set autoflush of stdout to TRUE.


############################################################################
### Process the options
############################################################################
Getopt::Long::config("require_order", "prefix=-");
GetOptions("h","help",
           "work_site=s" => \$work_site,
           "vendor=s" => \$vendor,
           "library=s" => \$library,
           "component=s" => \$component,
           "version=s" => \$version
) || die "(use '$program_name -h' for help)";



##############################################################################
## Help option
##############################################################################
if ( $opt_h  or $opt_help) 
  { print "\n build_lint_filelists -work_site /work  -vendor vendor_name  -library library_name  -component component_name   ";
    print "\n";
    exit 1;
  }


##############################################################################
## 
##############################################################################



$home = cwd();

my  $child_dir =       yp::lib::get_child_dir;

my $variant = "";
if($version) {$variant = "${component}_${version}"}
else         {$variant = "${component}"}

#############################################################################
## 
## 
#############################################################################

my $parser = XML::LibXML->new();



#/*********************************************************************************************/
#/                                                                                            */
#/  Create filelists for simulation  and  linting                                             */
#/                                                                                            */
#/                                                                                            */
#/*********************************************************************************************/

@filelist_sim = (  );

my  @filelist =       yp::lib::parse_component_file("$vendor","$library","$component","$version");




foreach $line (@filelist) 
   {
   $_ = $line;
   if(/::(\S+)::(\S+)::(\S+)::(\S+)::/) 
     { 
     $new_proj      = $2;
     $new_comp      = $3;
     $new_vendor    = $1;
     $new_version   = $4;                
     }



   #############################################################################
   ## Read destination from source xml file
   ## 
   #############################################################################



   my $spirit_component_file    = $parser->parse_file(yp::lib::find_ipxact_component($new_vendor,$new_proj,$new_comp,$new_version));




   if($new_version){$new_variant   = "${new_comp}_${new_version}"}
   else             {$new_variant   = $new_comp}



if(($new_vendor eq $vendor ) &&  ($new_proj eq $library ) &&  ($new_comp eq $component )  &&  ($new_version eq $version )        )
   
        {

           foreach  my   $i_name ($spirit_component_file->findnodes("//ipxact:fileSets/ipxact:fileSet/ipxact:file/ipxact:name"))
              {    
              my($file_name)      = $i_name ->findnodes('./text()')->to_literal ;
              my($file_type)      = $i_name ->findnodes('../ipxact:userFileType/text()')->to_literal ;
              my($logical_name)   = $i_name ->findnodes('../ipxact:logicalName/text()')->to_literal ;
              my($view_file)      = $i_name ->findnodes('../../ipxact:name/text()')->to_literal ;
              my $comp_xml_sep  = yp::lib::find_comp_xml_sep($new_vendor,$new_proj,$new_comp,$new_version);

              if( ($file_type eq "libraryDir") &&  ($view_file eq "fs-lint")  &&  ($logical_name eq "dest_dir")                    )
                 { 
                 push(@filelist_sim,"../../../../${new_comp}${comp_xml_sep}/${file_name}${new_variant}.v\n");
                 };

              } 
        }
   else
        {

           foreach  my   $i_name ($spirit_component_file->findnodes("//ipxact:fileSets/ipxact:fileSet/ipxact:file/ipxact:name"))
              {    
              my($file_name)      = $i_name ->findnodes('./text()')->to_literal ;
              my($file_type)      = $i_name ->findnodes('../ipxact:userFileType/text()')->to_literal ;
              my($logical_name)   = $i_name ->findnodes('../ipxact:logicalName/text()')->to_literal ;
              my($view_file)      = $i_name ->findnodes('../../ipxact:name/text()')->to_literal ;

              my $comp_xml_sep    = yp::lib::find_comp_xml_sep($new_vendor,$new_proj,$new_comp,$new_version);
              my $lib_comp_sep    = yp::lib::find_lib_comp_sep($new_vendor,$new_proj,$new_comp);
              my $library_path    = "${lib_comp_sep}${component}${comp_xml_sep}";

              if(($file_type eq "libraryDir")&& (($view_file eq "fs-lint") ) &&  ($logical_name eq "dest_dir")  )
                 { 
                 push(@filelist_sim,"../../../../../../${child_dir}/${new_vendor}__${new_proj}${library_path}/${file_name}${new_variant}.v\n");
                 };
              } 
           
        }
  
   }






#############################################################################
## 
## 
#############################################################################

print "Building rtl_check  filelists for  $work_site  $vendor $library   $component $version $variant \n" ;

my $spirit_component_file    = $parser->parse_file(yp::lib::find_ipxact_component($vendor,$library,$component,$version));
my $socgen_file               = $parser->parse_file(yp::lib::find_componentConfiguration($vendor,$library,$component));





#/*********************************************************************************************/
#/                                                                                            */
#/                                                                                            */
#/  Read each variants parameters and defaults into an array and their order into an array    */
#/  order must be preservered so that parameters can use the values of other parameters       */
#/                                                                                            */
#/*********************************************************************************************/

my %default_parameters = ();
my @parameter_order    = ();


foreach  my   $i_name ($socgen_file->findnodes("//socgen:testbenches/socgen:testbench[socgen:variant/text() = '$variant']/socgen:parameters/socgen:parameter"))
      {
      my($parameter_name)     = $i_name ->findnodes('socgen:name/text()')->to_literal ;
      my($parameter_default)  = $i_name ->findnodes('socgen:value/text()')->to_literal ;
      $default_parameters{$parameter_name}  = $parameter_default;
      push  @parameter_order ,$parameter_name ;  
 #     print "XXXXY $parameter_name     $parameter_default       \n"; 
      }








foreach my $comp ($spirit_component_file->findnodes('//ipxact:component')) 
   {
   my($vendor)   = $comp->findnodes('./ipxact:vendor/text()')->to_literal ;
   my($library)  = $comp->findnodes('./ipxact:library/text()')->to_literal ;
   my($name)     = $comp->findnodes('./ipxact:name/text()')->to_literal ;
   my($version)  = $comp->findnodes('./ipxact:version/text()')->to_literal ;
   my $variant = "";
   if($version) {$variant = "${name}_${version}"}
   else         {$variant = "${name}"}
   print "rtl/gen directories  for    $library - $component         VLNV        $vendor - $library -  $name -  $variant \n"; 
   }



 







   push(@filelist_sim,"    ./TestBench\n");             

   print "CREATING componentRef filelists for   $library   $component  $name $variant \n"; 

   @filelist_sim =       sys::lib::trim_sort(@filelist_sim);

        











   #/*********************************************************************************************/
   #/                                                                                            */
   #/ Make simulation file set                                                                   */
   #/                                                                                            */
   #/                                                                                            */
   #/                                                                                            */
   #/                                                                                            */
   #/*********************************************************************************************/

   print "CREATING sim files for   $library  $component   $chip   $name  $variant \n"; 




   my $socgen_file     = $parser->parse_file(yp::lib::find_componentConfiguration($vendor,$library,$component));

    foreach  my   $i_name ($socgen_file->findnodes("//socgen:componentConfiguration/socgen:sim/socgen:rtl_check/socgen:lint[socgen:variant/text() = '$variant']"))
      {
      my($simulation)      = $i_name ->findnodes('socgen:name/text()')->to_literal ;
      my($configuration)   = $i_name ->findnodes('socgen:configuration/text()')->to_literal ;

      print " lint  files for   $library  $component   $variant  $simulation $configuration          \n"; 

      my $sim_library_path ;
      my $lib_comp_sep             = yp::lib::find_lib_comp_sep($vendor,$library,$component);
      my $sim_comp_path            = $socgen_file->findnodes("//socgen:componentConfiguration/socgen:sim/socgen:comp_path/text()")->to_literal;

      if ($sim_comp_path)
        {
        $sim_library_path            ="${lib_comp_sep}${sim_comp_path}";
        }
      else
         {
         $sim_library_path            = $socgen_file->findnodes("//socgen:componentConfiguration/socgen:sim/socgen:library_path/text()")->to_literal;
         }


      my $path  = "${home}${work_site}/${vendor}__${library}${sim_library_path}/rtl_check";

      mkdir $path,0755 unless (-e $path) ;

      $path  = "${home}${work_site}/${vendor}__${library}${sim_library_path}/rtl_check/${simulation}";
      mkdir $path,0755   unless (-e $path);


      $outfile ="${home}${work_site}/${vendor}__${library}${sim_library_path}/rtl_check/${simulation}/TestBench";
      open SIM_PARM_FILE,">$outfile" or die "unable to open $outfile";

      my %local_parameters =  %default_parameters;
      my @local_order      =  @parameter_order;

      foreach  my   $i_name ($socgen_file->findnodes("//socgen:configurations/socgen:configuration[socgen:name/text() = '$configuration']/./socgen:parameters/socgen:parameter/socgen:name"))
         {
         my($par_name)   = $i_name ->findnodes('./text()')->to_literal ;
         my($par_value)  = $i_name ->findnodes('../socgen:value/text()')->to_literal ;
         if($local_parameters{$par_name} eq '' )  { push @local_order , $par_name; }
         $local_parameters{$par_name} = $par_value; 
         }
    
      foreach  my   $i_name ($socgen_file->findnodes("//socgen:componentConfiguration/socgen:sim/socgen:rtl_check/socgen:lint[socgen:name/text() = '$simulation']/./socgen:parameters/socgen:parameter/socgen:name"))
         {
         my($par_name)   = $i_name ->findnodes('./text()')->to_literal ;
         my($par_value)  = $i_name ->findnodes('../socgen:value/text()')->to_literal ;
         if  ( $local_parameters{$par_name} eq '' )  { push @local_order , $par_name; }
         $local_parameters{$par_name} = $par_value;    
         }

   

      my $module_name = yp::lib::get_module_name($vendor,$library,$component,$version);
         
      print SIM_PARM_FILE  "//  Testbench  for  $library    $component    $variant   $configuration    $simulation\n";
      print SIM_PARM_FILE  "                                \n";
      print SIM_PARM_FILE  "module TB(input clk,input reset); \n";
      print SIM_PARM_FILE  "   \n\n";
      print SIM_PARM_FILE  "     $module_name   \n";

      my $first =1;

      foreach  my  $parameter_name  (@local_order)
         {

         my($parameter_default)  =    $local_parameters{$parameter_name}; 

       #  if a parameter is used to define a paramter then use its value instead. Only works for lookup- no alterations
         if($local_parameters{$parameter_default}) {   $parameter_default  =    $local_parameters{$parameter_default}      }

         if($first)
           {         
           print SIM_PARM_FILE  "   #(  .${parameter_name}(${parameter_default})";
           $first = 0;
           }
         else
           {         
           print SIM_PARM_FILE  ",\n       .${parameter_name}(${parameter_default})";
           }
         }

         if($first)       { print SIM_PARM_FILE  "  ";}
         else             { print SIM_PARM_FILE  ") ";}

      print SIM_PARM_FILE  "  test \n (.clk(clk),.reset(reset)); \n\n\n\n endmodule \n  ";



      }