URL
https://opencores.org/ocsvn/sparc64soc/sparc64soc/trunk
Subversion Repositories sparc64soc
[/] [sparc64soc/] [trunk/] [OC-Ethernet/] [eth_maccontrol.v] - Rev 8
Go to most recent revision | Compare with Previous | Blame | View Log
////////////////////////////////////////////////////////////////////// //// //// //// eth_maccontrol.v //// //// //// //// This file is part of the Ethernet IP core project //// //// http://www.opencores.org/projects/ethmac/ //// //// //// //// Author(s): //// //// - Igor Mohor (igorM@opencores.org) //// //// //// //// All additional information is avaliable in the Readme.txt //// //// file. //// //// //// ////////////////////////////////////////////////////////////////////// //// //// //// Copyright (C) 2001 Authors //// //// //// //// This source file may be used and distributed without //// //// restriction provided that this copyright statement is not //// //// removed from the file and that any derivative work contains //// //// the original copyright notice and the associated disclaimer. //// //// //// //// This source file is free software; you can redistribute it //// //// and/or modify it under the terms of the GNU Lesser General //// //// Public License as published by the Free Software Foundation; //// //// either version 2.1 of the License, or (at your option) any //// //// later version. //// //// //// //// This source is distributed in the hope that it will be //// //// useful, but WITHOUT ANY WARRANTY; without even the implied //// //// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR //// //// PURPOSE. See the GNU Lesser General Public License for more //// //// details. //// //// //// //// You should have received a copy of the GNU Lesser General //// //// Public License along with this source; if not, download it //// //// from http://www.opencores.org/lgpl.shtml //// //// //// ////////////////////////////////////////////////////////////////////// // // CVS Revision History // // $Log: not supported by cvs2svn $ // Revision 1.6 2002/11/22 01:57:06 mohor // Rx Flow control fixed. CF flag added to the RX buffer descriptor. RxAbort // synchronized. // // Revision 1.5 2002/11/21 00:14:39 mohor // TxDone and TxAbort changed so they're not propagated to the wishbone // module when control frame is transmitted. // // Revision 1.4 2002/11/19 17:37:32 mohor // When control frame (PAUSE) was sent, status was written in the // eth_wishbone module and both TXB and TXC interrupts were set. Fixed. // Only TXC interrupt is set. // // Revision 1.3 2002/01/23 10:28:16 mohor // Link in the header changed. // // Revision 1.2 2001/10/19 08:43:51 mohor // eth_timescale.v changed to timescale.v This is done because of the // simulation of the few cores in a one joined project. // // Revision 1.1 2001/08/06 14:44:29 mohor // A define FPGA added to select between Artisan RAM (for ASIC) and Block Ram (For Virtex). // Include files fixed to contain no path. // File names and module names changed ta have a eth_ prologue in the name. // File eth_timescale.v is used to define timescale // All pin names on the top module are changed to contain _I, _O or _OE at the end. // Bidirectional signal MDIO is changed to three signals (Mdc_O, Mdi_I, Mdo_O // and Mdo_OE. The bidirectional signal must be created on the top level. This // is done due to the ASIC tools. // // Revision 1.1 2001/07/30 21:23:42 mohor // Directory structure changed. Files checked and joind together. // // Revision 1.1 2001/07/03 12:51:54 mohor // Initial release of the MAC Control module. // // // // `include "timescale.v" module eth_maccontrol (MTxClk, MRxClk, TxReset, RxReset, TPauseRq, TxDataIn, TxStartFrmIn, TxUsedDataIn, TxEndFrmIn, TxDoneIn, TxAbortIn, RxData, RxValid, RxStartFrm, RxEndFrm, ReceiveEnd, ReceivedPacketGood, ReceivedLengthOK, TxFlow, RxFlow, DlyCrcEn, TxPauseTV, MAC, PadIn, PadOut, CrcEnIn, CrcEnOut, TxDataOut, TxStartFrmOut, TxEndFrmOut, TxDoneOut, TxAbortOut, TxUsedDataOut, WillSendControlFrame, TxCtrlEndFrm, ReceivedPauseFrm, ControlFrmAddressOK, SetPauseTimer, r_PassAll, RxStatusWriteLatched_sync2 ); parameter Tp = 1; input MTxClk; // Transmit clock (from PHY) input MRxClk; // Receive clock (from PHY) input TxReset; // Transmit reset input RxReset; // Receive reset input TPauseRq; // Transmit control frame (from host) input [7:0] TxDataIn; // Transmit packet data byte (from host) input TxStartFrmIn; // Transmit packet start frame input (from host) input TxUsedDataIn; // Transmit packet used data (from TxEthMAC) input TxEndFrmIn; // Transmit packet end frame input (from host) input TxDoneIn; // Transmit packet done (from TxEthMAC) input TxAbortIn; // Transmit packet abort (input from TxEthMAC) input PadIn; // Padding (input from registers) input CrcEnIn; // Crc append (input from registers) input [7:0] RxData; // Receive Packet Data (from RxEthMAC) input RxValid; // Received a valid packet input RxStartFrm; // Receive packet start frame (input from RxEthMAC) input RxEndFrm; // Receive packet end frame (input from RxEthMAC) input ReceiveEnd; // End of receiving of the current packet (input from RxEthMAC) input ReceivedPacketGood; // Received packet is good input ReceivedLengthOK; // Length of the received packet is OK input TxFlow; // Tx flow control (from registers) input RxFlow; // Rx flow control (from registers) input DlyCrcEn; // Delayed CRC enabled (from registers) input [15:0] TxPauseTV; // Transmit Pause Timer Value (from registers) input [47:0] MAC; // MAC address (from registers) input RxStatusWriteLatched_sync2; input r_PassAll; output [7:0] TxDataOut; // Transmit Packet Data (to TxEthMAC) output TxStartFrmOut; // Transmit packet start frame (output to TxEthMAC) output TxEndFrmOut; // Transmit packet end frame (output to TxEthMAC) output TxDoneOut; // Transmit packet done (to host) output TxAbortOut; // Transmit packet aborted (to host) output TxUsedDataOut; // Transmit packet used data (to host) output PadOut; // Padding (output to TxEthMAC) output CrcEnOut; // Crc append (output to TxEthMAC) output WillSendControlFrame; output TxCtrlEndFrm; output ReceivedPauseFrm; output ControlFrmAddressOK; output SetPauseTimer; reg TxUsedDataOutDetected; reg TxAbortInLatched; reg TxDoneInLatched; reg MuxedDone; reg MuxedAbort; wire Pause; wire TxCtrlStartFrm; wire [7:0] ControlData; wire CtrlMux; wire SendingCtrlFrm; // Sending Control Frame (enables padding and CRC) wire BlockTxDone; // Signal TxUsedDataOut was detected (a transfer is already in progress) always @ (posedge MTxClk or posedge TxReset) begin if(TxReset) TxUsedDataOutDetected <= #Tp 1'b0; else if(TxDoneIn | TxAbortIn) TxUsedDataOutDetected <= #Tp 1'b0; else if(TxUsedDataOut) TxUsedDataOutDetected <= #Tp 1'b1; end // Latching variables always @ (posedge MTxClk or posedge TxReset) begin if(TxReset) begin TxAbortInLatched <= #Tp 1'b0; TxDoneInLatched <= #Tp 1'b0; end else begin TxAbortInLatched <= #Tp TxAbortIn; TxDoneInLatched <= #Tp TxDoneIn; end end // Generating muxed abort signal always @ (posedge MTxClk or posedge TxReset) begin if(TxReset) MuxedAbort <= #Tp 1'b0; else if(TxStartFrmIn) MuxedAbort <= #Tp 1'b0; else if(TxAbortIn & ~TxAbortInLatched & TxUsedDataOutDetected) MuxedAbort <= #Tp 1'b1; end // Generating muxed done signal always @ (posedge MTxClk or posedge TxReset) begin if(TxReset) MuxedDone <= #Tp 1'b0; else if(TxStartFrmIn) MuxedDone <= #Tp 1'b0; else if(TxDoneIn & (~TxDoneInLatched) & TxUsedDataOutDetected) MuxedDone <= #Tp 1'b1; end // TxDoneOut assign TxDoneOut = CtrlMux? ((~TxStartFrmIn) & (~BlockTxDone) & MuxedDone) : ((~TxStartFrmIn) & (~BlockTxDone) & TxDoneIn); // TxAbortOut assign TxAbortOut = CtrlMux? ((~TxStartFrmIn) & (~BlockTxDone) & MuxedAbort) : ((~TxStartFrmIn) & (~BlockTxDone) & TxAbortIn); // TxUsedDataOut assign TxUsedDataOut = ~CtrlMux & TxUsedDataIn; // TxStartFrmOut assign TxStartFrmOut = CtrlMux? TxCtrlStartFrm : (TxStartFrmIn & ~Pause); // TxEndFrmOut assign TxEndFrmOut = CtrlMux? TxCtrlEndFrm : TxEndFrmIn; // TxDataOut[7:0] assign TxDataOut[7:0] = CtrlMux? ControlData[7:0] : TxDataIn[7:0]; // PadOut assign PadOut = PadIn | SendingCtrlFrm; // CrcEnOut assign CrcEnOut = CrcEnIn | SendingCtrlFrm; // Connecting receivecontrol module eth_receivecontrol receivecontrol1 ( .MTxClk(MTxClk), .MRxClk(MRxClk), .TxReset(TxReset), .RxReset(RxReset), .RxData(RxData), .RxValid(RxValid), .RxStartFrm(RxStartFrm), .RxEndFrm(RxEndFrm), .RxFlow(RxFlow), .ReceiveEnd(ReceiveEnd), .MAC(MAC), .DlyCrcEn(DlyCrcEn), .TxDoneIn(TxDoneIn), .TxAbortIn(TxAbortIn), .TxStartFrmOut(TxStartFrmOut), .ReceivedLengthOK(ReceivedLengthOK), .ReceivedPacketGood(ReceivedPacketGood), .TxUsedDataOutDetected(TxUsedDataOutDetected), .Pause(Pause), .ReceivedPauseFrm(ReceivedPauseFrm), .AddressOK(ControlFrmAddressOK), .r_PassAll(r_PassAll), .RxStatusWriteLatched_sync2(RxStatusWriteLatched_sync2), .SetPauseTimer(SetPauseTimer) ); eth_transmitcontrol transmitcontrol1 ( .MTxClk(MTxClk), .TxReset(TxReset), .TxUsedDataIn(TxUsedDataIn), .TxUsedDataOut(TxUsedDataOut), .TxDoneIn(TxDoneIn), .TxAbortIn(TxAbortIn), .TxStartFrmIn(TxStartFrmIn), .TPauseRq(TPauseRq), .TxUsedDataOutDetected(TxUsedDataOutDetected), .TxFlow(TxFlow), .DlyCrcEn(DlyCrcEn), .TxPauseTV(TxPauseTV), .MAC(MAC), .TxCtrlStartFrm(TxCtrlStartFrm), .TxCtrlEndFrm(TxCtrlEndFrm), .SendingCtrlFrm(SendingCtrlFrm), .CtrlMux(CtrlMux), .ControlData(ControlData), .WillSendControlFrame(WillSendControlFrame), .BlockTxDone(BlockTxDone) ); endmodule
Go to most recent revision | Compare with Previous | Blame | View Log