URL
https://opencores.org/ocsvn/sparc64soc/sparc64soc/trunk
Subversion Repositories sparc64soc
[/] [sparc64soc/] [trunk/] [OC-Ethernet/] [eth_rxethmac.v] - Rev 5
Go to most recent revision | Compare with Previous | Blame | View Log
////////////////////////////////////////////////////////////////////// //// //// //// eth_rxethmac.v //// //// //// //// This file is part of the Ethernet IP core project //// //// http://www.opencores.org/projects/ethmac/ //// //// //// //// Author(s): //// //// - Igor Mohor (igorM@opencores.org) //// //// - Novan Hartadi (novan@vlsi.itb.ac.id) //// //// - Mahmud Galela (mgalela@vlsi.itb.ac.id) //// //// //// //// All additional information is avaliable in the Readme.txt //// //// file. //// //// //// ////////////////////////////////////////////////////////////////////// //// //// //// Copyright (C) 2001 Authors //// //// //// //// This source file may be used and distributed without //// //// restriction provided that this copyright statement is not //// //// removed from the file and that any derivative work contains //// //// the original copyright notice and the associated disclaimer. //// //// //// //// This source file is free software; you can redistribute it //// //// and/or modify it under the terms of the GNU Lesser General //// //// Public License as published by the Free Software Foundation; //// //// either version 2.1 of the License, or (at your option) any //// //// later version. //// //// //// //// This source is distributed in the hope that it will be //// //// useful, but WITHOUT ANY WARRANTY; without even the implied //// //// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR //// //// PURPOSE. See the GNU Lesser General Public License for more //// //// details. //// //// //// //// You should have received a copy of the GNU Lesser General //// //// Public License along with this source; if not, download it //// //// from http://www.opencores.org/lgpl.shtml //// //// //// ////////////////////////////////////////////////////////////////////// // // CVS Revision History // // $Log: not supported by cvs2svn $ // Revision 1.12 2004/04/26 15:26:23 igorm // - Bug connected to the TX_BD_NUM_Wr signal fixed (bug came in with the // previous update of the core. // - TxBDAddress is set to 0 after the TX is enabled in the MODER register. // - RxBDAddress is set to r_TxBDNum<<1 after the RX is enabled in the MODER // register. (thanks to Mathias and Torbjorn) // - Multicast reception was fixed. Thanks to Ulrich Gries // // Revision 1.11 2004/03/17 09:32:15 igorm // Multicast detection fixed. Only the LSB of the first byte is checked. // // Revision 1.10 2002/11/22 01:57:06 mohor // Rx Flow control fixed. CF flag added to the RX buffer descriptor. RxAbort // synchronized. // // Revision 1.9 2002/11/19 17:35:35 mohor // AddressMiss status is connecting to the Rx BD. AddressMiss is identifying // that a frame was received because of the promiscous mode. // // Revision 1.8 2002/02/16 07:15:27 mohor // Testbench fixed, code simplified, unused signals removed. // // Revision 1.7 2002/02/15 13:44:28 mohor // RxAbort is an output. No need to have is declared as wire. // // Revision 1.6 2002/02/15 11:17:48 mohor // File format changed. // // Revision 1.5 2002/02/14 20:48:43 billditt // Addition of new module eth_addrcheck.v // // Revision 1.4 2002/01/23 10:28:16 mohor // Link in the header changed. // // Revision 1.3 2001/10/19 08:43:51 mohor // eth_timescale.v changed to timescale.v This is done because of the // simulation of the few cores in a one joined project. // // Revision 1.2 2001/09/11 14:17:00 mohor // Few little NCSIM warnings fixed. // // Revision 1.1 2001/08/06 14:44:29 mohor // A define FPGA added to select between Artisan RAM (for ASIC) and Block Ram (For Virtex). // Include files fixed to contain no path. // File names and module names changed ta have a eth_ prologue in the name. // File eth_timescale.v is used to define timescale // All pin names on the top module are changed to contain _I, _O or _OE at the end. // Bidirectional signal MDIO is changed to three signals (Mdc_O, Mdi_I, Mdo_O // and Mdo_OE. The bidirectional signal must be created on the top level. This // is done due to the ASIC tools. // // Revision 1.1 2001/07/30 21:23:42 mohor // Directory structure changed. Files checked and joind together. // // Revision 1.1 2001/06/27 21:26:19 mohor // Initial release of the RxEthMAC module. // // // // // `include "timescale.v" module eth_rxethmac (MRxClk, MRxDV, MRxD, Reset, Transmitting, MaxFL, r_IFG, HugEn, DlyCrcEn, RxData, RxValid, RxStartFrm, RxEndFrm, ByteCnt, ByteCntEq0, ByteCntGreat2, ByteCntMaxFrame, CrcError, StateIdle, StatePreamble, StateSFD, StateData, MAC, r_Pro, r_Bro,r_HASH0, r_HASH1, RxAbort, AddressMiss, PassAll, ControlFrmAddressOK ); parameter Tp = 1; input MRxClk; input MRxDV; input [3:0] MRxD; input Transmitting; input HugEn; input DlyCrcEn; input [15:0] MaxFL; input r_IFG; input Reset; input [47:0] MAC; // Station Address input r_Bro; // broadcast disable input r_Pro; // promiscuous enable input [31:0] r_HASH0; // lower 4 bytes Hash Table input [31:0] r_HASH1; // upper 4 bytes Hash Table input PassAll; input ControlFrmAddressOK; output [7:0] RxData; output RxValid; output RxStartFrm; output RxEndFrm; output [15:0] ByteCnt; output ByteCntEq0; output ByteCntGreat2; output ByteCntMaxFrame; output CrcError; output StateIdle; output StatePreamble; output StateSFD; output [1:0] StateData; output RxAbort; output AddressMiss; reg [7:0] RxData; reg RxValid; reg RxStartFrm; reg RxEndFrm; reg Broadcast; reg Multicast; reg [5:0] CrcHash; reg CrcHashGood; reg DelayData; reg [7:0] LatchedByte; reg [7:0] RxData_d; reg RxValid_d; reg RxStartFrm_d; reg RxEndFrm_d; wire MRxDEqD; wire MRxDEq5; wire StateDrop; wire ByteCntEq1; wire ByteCntEq2; wire ByteCntEq3; wire ByteCntEq4; wire ByteCntEq5; wire ByteCntEq6; wire ByteCntEq7; wire ByteCntSmall7; wire [31:0] Crc; wire Enable_Crc; wire Initialize_Crc; wire [3:0] Data_Crc; wire GenerateRxValid; wire GenerateRxStartFrm; wire GenerateRxEndFrm; wire DribbleRxEndFrm; wire [3:0] DlyCrcCnt; wire IFGCounterEq24; assign MRxDEqD = MRxD == 4'hd; assign MRxDEq5 = MRxD == 4'h5; // Rx State Machine module eth_rxstatem rxstatem1 (.MRxClk(MRxClk), .Reset(Reset), .MRxDV(MRxDV), .ByteCntEq0(ByteCntEq0), .ByteCntGreat2(ByteCntGreat2), .Transmitting(Transmitting), .MRxDEq5(MRxDEq5), .MRxDEqD(MRxDEqD), .IFGCounterEq24(IFGCounterEq24), .ByteCntMaxFrame(ByteCntMaxFrame), .StateData(StateData), .StateIdle(StateIdle), .StatePreamble(StatePreamble), .StateSFD(StateSFD), .StateDrop(StateDrop) ); // Rx Counters module eth_rxcounters rxcounters1 (.MRxClk(MRxClk), .Reset(Reset), .MRxDV(MRxDV), .StateIdle(StateIdle), .StateSFD(StateSFD), .StateData(StateData), .StateDrop(StateDrop), .StatePreamble(StatePreamble), .MRxDEqD(MRxDEqD), .DlyCrcEn(DlyCrcEn), .DlyCrcCnt(DlyCrcCnt), .Transmitting(Transmitting), .MaxFL(MaxFL), .r_IFG(r_IFG), .HugEn(HugEn), .IFGCounterEq24(IFGCounterEq24), .ByteCntEq0(ByteCntEq0), .ByteCntEq1(ByteCntEq1), .ByteCntEq2(ByteCntEq2), .ByteCntEq3(ByteCntEq3), .ByteCntEq4(ByteCntEq4), .ByteCntEq5(ByteCntEq5), .ByteCntEq6(ByteCntEq6), .ByteCntEq7(ByteCntEq7), .ByteCntGreat2(ByteCntGreat2), .ByteCntSmall7(ByteCntSmall7), .ByteCntMaxFrame(ByteCntMaxFrame), .ByteCntOut(ByteCnt) ); // Rx Address Check eth_rxaddrcheck rxaddrcheck1 (.MRxClk(MRxClk), .Reset( Reset), .RxData(RxData), .Broadcast (Broadcast), .r_Bro (r_Bro), .r_Pro(r_Pro), .ByteCntEq6(ByteCntEq6), .ByteCntEq7(ByteCntEq7), .ByteCntEq2(ByteCntEq2), .ByteCntEq3(ByteCntEq3), .ByteCntEq4(ByteCntEq4), .ByteCntEq5(ByteCntEq5), .HASH0(r_HASH0), .HASH1(r_HASH1), .CrcHash(CrcHash), .CrcHashGood(CrcHashGood), .StateData(StateData), .Multicast(Multicast), .MAC(MAC), .RxAbort(RxAbort), .RxEndFrm(RxEndFrm), .AddressMiss(AddressMiss), .PassAll(PassAll), .ControlFrmAddressOK(ControlFrmAddressOK) ); assign Enable_Crc = MRxDV & (|StateData & ~ByteCntMaxFrame); assign Initialize_Crc = StateSFD | DlyCrcEn & (|DlyCrcCnt[3:0]) & DlyCrcCnt[3:0] < 4'h9; assign Data_Crc[0] = MRxD[3]; assign Data_Crc[1] = MRxD[2]; assign Data_Crc[2] = MRxD[1]; assign Data_Crc[3] = MRxD[0]; // Connecting module Crc eth_crc crcrx (.Clk(MRxClk), .Reset(Reset), .Data(Data_Crc), .Enable(Enable_Crc), .Initialize(Initialize_Crc), .Crc(Crc), .CrcError(CrcError) ); // Latching CRC for use in the hash table always @ (posedge MRxClk) begin CrcHashGood <= #Tp StateData[0] & ByteCntEq6; end always @ (posedge MRxClk) begin if(Reset | StateIdle) CrcHash[5:0] <= #Tp 6'h0; else if(StateData[0] & ByteCntEq6) CrcHash[5:0] <= #Tp Crc[31:26]; end // Output byte stream always @ (posedge MRxClk or posedge Reset) begin if(Reset) begin RxData_d[7:0] <= #Tp 8'h0; DelayData <= #Tp 1'b0; LatchedByte[7:0] <= #Tp 8'h0; RxData[7:0] <= #Tp 8'h0; end else begin LatchedByte[7:0] <= #Tp {MRxD[3:0], LatchedByte[7:4]}; // Latched byte DelayData <= #Tp StateData[0]; if(GenerateRxValid) RxData_d[7:0] <= #Tp LatchedByte[7:0] & {8{|StateData}}; // Data goes through only in data state else if(~DelayData) RxData_d[7:0] <= #Tp 8'h0; // Delaying data to be valid for two cycles. Zero when not active. RxData[7:0] <= #Tp RxData_d[7:0]; // Output data byte end end always @ (posedge MRxClk or posedge Reset) begin if(Reset) Broadcast <= #Tp 1'b0; else begin if(StateData[0] & ~(&LatchedByte[7:0]) & ByteCntSmall7) Broadcast <= #Tp 1'b0; else if(StateData[0] & (&LatchedByte[7:0]) & ByteCntEq1) Broadcast <= #Tp 1'b1; else if(RxAbort | RxEndFrm) Broadcast <= #Tp 1'b0; end end always @ (posedge MRxClk or posedge Reset) begin if(Reset) Multicast <= #Tp 1'b0; else begin if(StateData[0] & ByteCntEq1 & LatchedByte[0]) Multicast <= #Tp 1'b1; else if(RxAbort | RxEndFrm) Multicast <= #Tp 1'b0; end end assign GenerateRxValid = StateData[0] & (~ByteCntEq0 | DlyCrcCnt >= 4'h3); always @ (posedge MRxClk or posedge Reset) begin if(Reset) begin RxValid_d <= #Tp 1'b0; RxValid <= #Tp 1'b0; end else begin RxValid_d <= #Tp GenerateRxValid; RxValid <= #Tp RxValid_d; end end assign GenerateRxStartFrm = StateData[0] & (ByteCntEq1 & ~DlyCrcEn | DlyCrcCnt == 4'h3 & DlyCrcEn); always @ (posedge MRxClk or posedge Reset) begin if(Reset) begin RxStartFrm_d <= #Tp 1'b0; RxStartFrm <= #Tp 1'b0; end else begin RxStartFrm_d <= #Tp GenerateRxStartFrm; RxStartFrm <= #Tp RxStartFrm_d; end end assign GenerateRxEndFrm = StateData[0] & (~MRxDV & ByteCntGreat2 | ByteCntMaxFrame); assign DribbleRxEndFrm = StateData[1] & ~MRxDV & ByteCntGreat2; always @ (posedge MRxClk or posedge Reset) begin if(Reset) begin RxEndFrm_d <= #Tp 1'b0; RxEndFrm <= #Tp 1'b0; end else begin RxEndFrm_d <= #Tp GenerateRxEndFrm; RxEndFrm <= #Tp RxEndFrm_d | DribbleRxEndFrm; end end endmodule
Go to most recent revision | Compare with Previous | Blame | View Log