URL
https://opencores.org/ocsvn/sparc64soc/sparc64soc/trunk
Subversion Repositories sparc64soc
[/] [sparc64soc/] [trunk/] [OC-Ethernet/] [eth_rxstatem.v] - Rev 5
Go to most recent revision | Compare with Previous | Blame | View Log
////////////////////////////////////////////////////////////////////// //// //// //// eth_rxstatem.v //// //// //// //// This file is part of the Ethernet IP core project //// //// http://www.opencores.org/projects/ethmac/ //// //// //// //// Author(s): //// //// - Igor Mohor (igorM@opencores.org) //// //// - Novan Hartadi (novan@vlsi.itb.ac.id) //// //// - Mahmud Galela (mgalela@vlsi.itb.ac.id) //// //// //// //// All additional information is avaliable in the Readme.txt //// //// file. //// //// //// ////////////////////////////////////////////////////////////////////// //// //// //// Copyright (C) 2001 Authors //// //// //// //// This source file may be used and distributed without //// //// restriction provided that this copyright statement is not //// //// removed from the file and that any derivative work contains //// //// the original copyright notice and the associated disclaimer. //// //// //// //// This source file is free software; you can redistribute it //// //// and/or modify it under the terms of the GNU Lesser General //// //// Public License as published by the Free Software Foundation; //// //// either version 2.1 of the License, or (at your option) any //// //// later version. //// //// //// //// This source is distributed in the hope that it will be //// //// useful, but WITHOUT ANY WARRANTY; without even the implied //// //// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR //// //// PURPOSE. See the GNU Lesser General Public License for more //// //// details. //// //// //// //// You should have received a copy of the GNU Lesser General //// //// Public License along with this source; if not, download it //// //// from http://www.opencores.org/lgpl.shtml //// //// //// ////////////////////////////////////////////////////////////////////// // // CVS Revision History // // $Log: not supported by cvs2svn $ // Revision 1.5 2002/01/23 10:28:16 mohor // Link in the header changed. // // Revision 1.4 2001/10/19 08:43:51 mohor // eth_timescale.v changed to timescale.v This is done because of the // simulation of the few cores in a one joined project. // // Revision 1.3 2001/10/18 12:07:11 mohor // Status signals changed, Adress decoding changed, interrupt controller // added. // // Revision 1.2 2001/09/11 14:17:00 mohor // Few little NCSIM warnings fixed. // // Revision 1.1 2001/08/06 14:44:29 mohor // A define FPGA added to select between Artisan RAM (for ASIC) and Block Ram (For Virtex). // Include files fixed to contain no path. // File names and module names changed ta have a eth_ prologue in the name. // File eth_timescale.v is used to define timescale // All pin names on the top module are changed to contain _I, _O or _OE at the end. // Bidirectional signal MDIO is changed to three signals (Mdc_O, Mdi_I, Mdo_O // and Mdo_OE. The bidirectional signal must be created on the top level. This // is done due to the ASIC tools. // // Revision 1.1 2001/07/30 21:23:42 mohor // Directory structure changed. Files checked and joind together. // // Revision 1.2 2001/07/03 12:55:41 mohor // Minor changes because of the synthesys warnings. // // // Revision 1.1 2001/06/27 21:26:19 mohor // Initial release of the RxEthMAC module. // // // // `include "timescale.v" module eth_rxstatem (MRxClk, Reset, MRxDV, ByteCntEq0, ByteCntGreat2, Transmitting, MRxDEq5, MRxDEqD, IFGCounterEq24, ByteCntMaxFrame, StateData, StateIdle, StatePreamble, StateSFD, StateDrop ); parameter Tp = 1; input MRxClk; input Reset; input MRxDV; input ByteCntEq0; input ByteCntGreat2; input MRxDEq5; input Transmitting; input MRxDEqD; input IFGCounterEq24; input ByteCntMaxFrame; output [1:0] StateData; output StateIdle; output StateDrop; output StatePreamble; output StateSFD; reg StateData0; reg StateData1; reg StateIdle; reg StateDrop; reg StatePreamble; reg StateSFD; wire StartIdle; wire StartDrop; wire StartData0; wire StartData1; wire StartPreamble; wire StartSFD; // Defining the next state assign StartIdle = ~MRxDV & (StateDrop | StatePreamble | StateSFD | (|StateData)); assign StartPreamble = MRxDV & ~MRxDEq5 & (StateIdle & ~Transmitting); assign StartSFD = MRxDV & MRxDEq5 & (StateIdle & ~Transmitting | StatePreamble); assign StartData0 = MRxDV & (StateSFD & MRxDEqD & IFGCounterEq24 | StateData1); assign StartData1 = MRxDV & StateData0 & (~ByteCntMaxFrame); assign StartDrop = MRxDV & (StateIdle & Transmitting | StateSFD & ~IFGCounterEq24 & MRxDEqD | StateData0 & ByteCntMaxFrame ); // Rx State Machine always @ (posedge MRxClk or posedge Reset) begin if(Reset) begin StateIdle <= #Tp 1'b0; StateDrop <= #Tp 1'b1; StatePreamble <= #Tp 1'b0; StateSFD <= #Tp 1'b0; StateData0 <= #Tp 1'b0; StateData1 <= #Tp 1'b0; end else begin if(StartPreamble | StartSFD | StartDrop) StateIdle <= #Tp 1'b0; else if(StartIdle) StateIdle <= #Tp 1'b1; if(StartIdle) StateDrop <= #Tp 1'b0; else if(StartDrop) StateDrop <= #Tp 1'b1; if(StartSFD | StartIdle | StartDrop) StatePreamble <= #Tp 1'b0; else if(StartPreamble) StatePreamble <= #Tp 1'b1; if(StartPreamble | StartIdle | StartData0 | StartDrop) StateSFD <= #Tp 1'b0; else if(StartSFD) StateSFD <= #Tp 1'b1; if(StartIdle | StartData1 | StartDrop) StateData0 <= #Tp 1'b0; else if(StartData0) StateData0 <= #Tp 1'b1; if(StartIdle | StartData0 | StartDrop) StateData1 <= #Tp 1'b0; else if(StartData1) StateData1 <= #Tp 1'b1; end end assign StateData[1:0] = {StateData1, StateData0}; endmodule
Go to most recent revision | Compare with Previous | Blame | View Log