Subversion Repositories sparc64soc

// ========== Copyright Header Begin ==========================================
// 
// OpenSPARC T1 Processor File: sparc_exu_aluaddsub.v
// Copyright (c) 2006 Sun Microsystems, Inc.  All Rights Reserved.
// DO NOT ALTER OR REMOVE COPYRIGHT NOTICES.
// 
// The above named program is free software; you can redistribute it and/or
// modify it under the terms of the GNU General Public
// License version 2 as published by the Free Software Foundation.
// 
// The above named program is distributed in the hope that it will be 
// useful, but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
// General Public License for more details.
// 
// You should have received a copy of the GNU General Public
// License along with this work; if not, write to the Free Software
// Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301, USA.
// 
// ========== Copyright Header End ============================================
////////////////////////////////////////////////////////////////////////
/*
//  Module Name: sparc_exu_aluaddsub
//	Description:		This block implements addition and subtraction.
//            It takes two operands, a carry_in, plus two control signals
//            (subtract and use_cin).  If subtract is high, then rs2_data
//            is subtracted from rs1_data.  If use_cin is high, then
//            carry_in is added to the sum (addition) or subtracted from
//            the result (subtraction).  It outputs the result of the 
//            specified operation.  To keep the cin calculation from
//	      being in the critical path, it is moved into the d-stage.
//	      All other calculations are in the e-stage.
*/
 
module sparc_exu_aluaddsub
  (/*AUTOARG*/
   // Outputs
   adder_out, spr_out, alu_ecl_cout64_e_l, alu_ecl_cout32_e, 
   alu_ecl_adderin2_63_e, alu_ecl_adderin2_31_e, 
   // Inputs
   clk, se, byp_alu_rs1_data_e, byp_alu_rs2_data_e, ecl_alu_cin_e, 
   ifu_exu_invert_d
   );
   input clk;
   input se;
   input [63:0] byp_alu_rs1_data_e;   // 1st input operand
   input [63:0]  byp_alu_rs2_data_e;   // 2nd input operand
   input         ecl_alu_cin_e;           // carry in
   input         ifu_exu_invert_d;     // subtract used by adder
 
   output [63:0] adder_out; // result of adder
   output [63:0] spr_out;   // result of sum predict
   output         alu_ecl_cout64_e_l;
   output         alu_ecl_cout32_e;
   output       alu_ecl_adderin2_63_e;
   output       alu_ecl_adderin2_31_e;
 
   wire [63:0]  rs2_data;       // 2nd input to adder
   wire [63:0]  rs1_data;       // 1st input to adder
   wire [63:0]  subtract_d;
   wire [63:0]  subtract_e;
   wire         cout64_e;
 
////////////////////////////////////////////
//  Module implementation
////////////////////////////////////////////
   assign       subtract_d[63:0] = {64{ifu_exu_invert_d}};
   dff_s #(64) sub_dff(.din(subtract_d[63:0]), .clk(clk), .q(subtract_e[63:0]), .se(se),
                     .si(), .so());
 
   assign       rs1_data[63:0] = byp_alu_rs1_data_e[63:0];
 
   assign       rs2_data[63:0] = byp_alu_rs2_data_e[63:0] ^ subtract_e[63:0];
 
   assign      alu_ecl_adderin2_63_e = rs2_data[63];
   assign      alu_ecl_adderin2_31_e = rs2_data[31];
   sparc_exu_aluadder64 adder(.rs1_data(rs1_data[63:0]), .rs2_data(rs2_data[63:0]),
                              .cin(ecl_alu_cin_e), .adder_out(adder_out[63:0]),
                              .cout32(alu_ecl_cout32_e), .cout64(cout64_e));
   assign      alu_ecl_cout64_e_l = ~cout64_e;
 
 
   // sum predict
   sparc_exu_aluspr spr(.rs1_data(rs1_data[63:0]), .rs2_data(rs2_data[63:0]), .cin(ecl_alu_cin_e),
                        .spr_out(spr_out[63:0]));
 
endmodule // sparc_exu_aluaddsub