URL
https://opencores.org/ocsvn/sparc64soc/sparc64soc/trunk
Subversion Repositories sparc64soc
[/] [sparc64soc/] [trunk/] [T1-CPU/] [ifu/] [sparc_ifu_ifqdp.v] - Rev 5
Go to most recent revision | Compare with Previous | Blame | View Log
// ========== Copyright Header Begin ========================================== // // OpenSPARC T1 Processor File: sparc_ifu_ifqdp.v // Copyright (c) 2006 Sun Microsystems, Inc. All Rights Reserved. // DO NOT ALTER OR REMOVE COPYRIGHT NOTICES. // // The above named program is free software; you can redistribute it and/or // modify it under the terms of the GNU General Public // License version 2 as published by the Free Software Foundation. // // The above named program is distributed in the hope that it will be // useful, but WITHOUT ANY WARRANTY; without even the implied warranty of // MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU // General Public License for more details. // // You should have received a copy of the GNU General Public // License along with this work; if not, write to the Free Software // Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301, USA. // // ========== Copyright Header End ============================================ /////////////////////////////////////////////////////////////////////// /* // Module Name: sparc_ifu_ifqdp // Description: // The IFQ is the icache fill queue. This communicates between the // IFU and the outside world. It handles icache misses and // invalidate requests from the crossbar. // */ //FPGA_SYN enables all FPGA related modifications `ifdef FPGA_SYN `define FPGA_SYN_CLK_EN `define FPGA_SYN_CLK_DFF `endif //////////////////////////////////////////////////////////////////////// // Global header file includes //////////////////////////////////////////////////////////////////////// `include "iop.h" `include "ifu.h" //////////////////////////////////////////////////////////////////////// // Local header file includes / local defines //////////////////////////////////////////////////////////////////////// module sparc_ifu_ifqdp(/*AUTOARG*/ // Outputs so, ifu_lsu_pcxpkt_e, ifq_fdp_fill_inst, ifq_erb_asidata_i2, ifd_inv_ifqop_i2, ifq_icd_index_bf, ifq_icd_wrdata_i2, ifq_ict_wrtag_f, ifq_erb_wrindex_f, ifq_icd_wrway_bf, ifd_ifc_milhit_s, ifd_ifc_instoffset0, ifd_ifc_instoffset1, ifd_ifc_instoffset2, ifd_ifc_instoffset3, ifd_ifc_cpxthr_nxt, ifd_ifc_cpxreq_nxt, ifd_ifc_cpxreq_i1, ifd_ifc_destid0, ifd_ifc_destid1, ifd_ifc_destid2, ifd_ifc_destid3, ifd_ifc_newdestid_s, ifd_ifc_pcxline_d, ifd_ifc_asi_vachklo_i2, ifd_ifc_cpxvld_i2, ifd_ifc_asiaddr_i2, ifd_ifc_iobpkt_i2, ifd_ifc_fwd2ic_i2, ifd_ifc_4bpkt_i2, ifd_ifc_cpxnc_i2, ifd_ifc_cpxce_i2, ifd_ifc_cpxue_i2, ifd_ifc_cpxms_i2, ifd_ifc_miladdr4_i2, ifd_inv_wrway_i2, // Inputs rclk, se, si, lsu_ifu_cpxpkt_i1, lsu_ifu_asi_addr, lsu_ifu_stxa_data, itlb_ifq_paddr_s, fdp_ifq_paddr_f, ifc_ifd_reqvalid_e, ifc_ifd_filladdr4_i2, ifc_ifd_repway_s, ifc_ifd_uncached_e, ifc_ifd_thrid_e, ifc_ifd_pcxline_adj_d, ifc_ifd_errinv_e, ifc_ifd_ldmil_sel_new, ifc_ifd_ld_inq_i1, ifc_ifd_idx_sel_fwd_i2, ifc_ifd_milreq_sel_d_l, ifc_ifd_milfill_sel_i2_l, ifc_ifd_finst_sel_l, ifc_ifd_ifqbyp_sel_fwd_l, ifc_ifd_ifqbyp_sel_inq_l, ifc_ifd_ifqbyp_sel_asi_l, ifc_ifd_ifqbyp_sel_lsu_l, ifc_ifd_ifqbyp_en_l, ifc_ifd_addr_sel_bist_i2_l, ifc_ifd_addr_sel_asi_i2_l, ifc_ifd_addr_sel_old_i2_l, ifc_ifd_addr_sel_fill_i2_l, mbist_icache_way, mbist_icache_word, mbist_icache_index ); input rclk, se, si; input [`CPX_WIDTH-1:0] lsu_ifu_cpxpkt_i1; input [17:0] lsu_ifu_asi_addr; input [47:0] lsu_ifu_stxa_data; input [39:10] itlb_ifq_paddr_s; input [9:2] fdp_ifq_paddr_f; // from ifqctl input ifc_ifd_reqvalid_e; input ifc_ifd_filladdr4_i2; input [1:0] ifc_ifd_repway_s; input ifc_ifd_uncached_e; input [1:0] ifc_ifd_thrid_e; input [4:2] ifc_ifd_pcxline_adj_d; input ifc_ifd_errinv_e; // 2:1 mux selects input [3:0] ifc_ifd_ldmil_sel_new; // mil load enable input ifc_ifd_ld_inq_i1; // ld new cpxreq to in buffer input ifc_ifd_idx_sel_fwd_i2; // other mux selects input [3:0] ifc_ifd_milreq_sel_d_l, // selects outgoing mil_req ifc_ifd_milfill_sel_i2_l; // selects the mil entry just // returned from the fill // port input [3:0] ifc_ifd_finst_sel_l; // address to load to thr IR input ifc_ifd_ifqbyp_sel_fwd_l, // select next input to process ifc_ifd_ifqbyp_sel_inq_l, ifc_ifd_ifqbyp_sel_asi_l, ifc_ifd_ifqbyp_sel_lsu_l; input ifc_ifd_ifqbyp_en_l; input ifc_ifd_addr_sel_bist_i2_l, ifc_ifd_addr_sel_asi_i2_l, ifc_ifd_addr_sel_old_i2_l, ifc_ifd_addr_sel_fill_i2_l; input [1:0] mbist_icache_way; input mbist_icache_word; input [7:0] mbist_icache_index; output so; output [51:0] ifu_lsu_pcxpkt_e; output [32:0] ifq_fdp_fill_inst; output [47:0] ifq_erb_asidata_i2; output [`CPX_WIDTH-1:0] ifd_inv_ifqop_i2; output [`IC_IDX_HI:2] ifq_icd_index_bf; // index for wr and bist output [135:0] ifq_icd_wrdata_i2; output [`IC_TAG_SZ:0] ifq_ict_wrtag_f; // fill tag // output [`IC_TAG_SZ-1:0] ifq_erb_wrtag_f; // tag w/o parity output [`IC_IDX_HI:4] ifq_erb_wrindex_f; output [1:0] ifq_icd_wrway_bf; // fill data way output [3:0] ifd_ifc_milhit_s; // if an Imiss hits in MIL // output [7:0] ifd_ifc_mil_repway_s; output [1:0] ifd_ifc_instoffset0; // to select inst to TIR output [1:0] ifd_ifc_instoffset1; // to select inst to TIR output [1:0] ifd_ifc_instoffset2; // to select inst to TIR output [1:0] ifd_ifc_instoffset3; // to select inst to TIR output [1:0] ifd_ifc_cpxthr_nxt; output [3:0] ifd_ifc_cpxreq_nxt; // cpx reqtype + vbit output [`CPX_RQ_SIZE:0] ifd_ifc_cpxreq_i1; // cpx reqtype + vbit output [2:0] ifd_ifc_destid0, ifd_ifc_destid1, ifd_ifc_destid2, ifd_ifc_destid3, ifd_ifc_newdestid_s; output [4:2] ifd_ifc_pcxline_d; output ifd_ifc_asi_vachklo_i2; output ifd_ifc_cpxvld_i2; output [3:2] ifd_ifc_asiaddr_i2; output ifd_ifc_iobpkt_i2; output ifd_ifc_fwd2ic_i2; output ifd_ifc_4bpkt_i2; output ifd_ifc_cpxnc_i2; output ifd_ifc_cpxce_i2, ifd_ifc_cpxue_i2, ifd_ifc_cpxms_i2; output [3:0] ifd_ifc_miladdr4_i2; output [1:0] ifd_inv_wrway_i2; //---------------------------------------------------------------------- // Declarations //---------------------------------------------------------------------- // local signals wire [39:0] imiss_paddr_s; wire [9:2] lcl_paddr_s; wire [42:2] mil_entry0, // mil entries mil_entry1, mil_entry2, mil_entry3; // wire [42:2] mil0_in_s, // inputs to mil // mil1_in_s, // mil2_in_s, // mil3_in_s; wire tag_par_s, tag_par_i2; wire [42:2] newmil_entry_s; wire [42:2] mil_pcxreq_d, // outgoing request from mil pcxreq_d, // mil or direct ic or prev req pcxreq_e; // outgoing request to lsu wire [42:2] fill_addr_i2, fill_addr_adj, icaddr_i2, asi_addr_i2, bist_addr_i2; wire [42:4] wraddr_f; wire [`CPX_WIDTH-1:0] inq_cpxpkt_i1, // output from inq // inq_cpxpkt_nxt, stxa_data_pkt, fwd_data_pkt, ifqop_i1, ifqop_i2; // ifq op currently being processed wire [3:0] swc_i2; wire [135:0] icdata_i2; wire [3:0] parity_i2, par_i2; wire [17:0] asi_va_i2, asi_va_i1; wire [13:2] asi_fwd_index; wire clk; // wire [`IC_IDX_HI:6] inv_addr_i2; // // Code start here // assign clk = rclk; //---------------------------------------------------------------------- // Instruction Miss - Fill Request Datapath //---------------------------------------------------------------------- // new set of flops dff_s #(8) pcs_reg(.din (fdp_ifq_paddr_f[9:2]), .q (lcl_paddr_s[9:2]), .clk (clk), .se(se), .si(), .so()); // bits 1:0 are floating assign imiss_paddr_s = {itlb_ifq_paddr_s[39:10], lcl_paddr_s[9:2], 2'b0}; // Check for hit in MIL // Should we enable the comps to save power? -- timing problem // compare only top 35 bits (bot 5 bits are line offset of 32B line) sparc_ifu_cmp35 milcmp0 (.hit (ifd_ifc_milhit_s[0]), .a (imiss_paddr_s[39:5]), .b (mil_entry0[39:5]), .valid (1'b1) ); sparc_ifu_cmp35 milcmp1 (.hit (ifd_ifc_milhit_s[1]), .a (imiss_paddr_s[39:5]), .b (mil_entry1[39:5]), .valid (1'b1) ); sparc_ifu_cmp35 milcmp2 (.hit (ifd_ifc_milhit_s[2]), .a (imiss_paddr_s[39:5]), .b (mil_entry2[39:5]), .valid (1'b1) ); sparc_ifu_cmp35 milcmp3 (.hit (ifd_ifc_milhit_s[3]), .a (imiss_paddr_s[39:5]), .b (mil_entry3[39:5]), .valid (1'b1) ); // Send replacement way to ctl logic // assign ifd_ifc_mil_repway_s = {mil_entry3[41:40], // mil_entry2[41:40], // mil_entry1[41:40], // mil_entry0[41:40]}; // calculate tag parity sparc_ifu_par32 tag_par(.in ({{`ICT_FILL_BITS{1'b0}}, imiss_paddr_s[`IC_TAG_HI:`IC_TAG_LO]}), .out (tag_par_s)); // Missed Instruction List // 43 - NOT cacheable // 42 - tag parity // 41:40 - repl way // 39:0 - paddr // Prepare Missed Instruction List entry assign newmil_entry_s = {tag_par_s, ifc_ifd_repway_s, imiss_paddr_s[39:2]}; // ldmil_sel is thr_s[3:0] & imiss_s // dp_mux2es #(41) milin_mux0(.dout (mil0_in_s), // .in0 (mil_entry0), // .in1 (newmil_entry_s), // .sel (ifc_ifd_ldmil_sel_new[0])); // dp_mux2es #(41) milin_mux1(.dout (mil1_in_s), // .in0 (mil_entry1), // .in1 (newmil_entry_s), // .sel (ifc_ifd_ldmil_sel_new[1])); // dp_mux2es #(41) milin_mux2(.dout (mil2_in_s), // .in0 (mil_entry2), // .in1 (newmil_entry_s), // .sel (ifc_ifd_ldmil_sel_new[2])); // dp_mux2es #(41) milin_mux3(.dout (mil3_in_s), // .in0 (mil_entry3), // .in1 (newmil_entry_s), // .sel (ifc_ifd_ldmil_sel_new[3])); wire clk_mil0; `ifdef FPGA_SYN_CLK_EN `else bw_u1_ckenbuf_6x ckenmil0(.rclk (rclk), .clk (clk_mil0), .en_l (~ifc_ifd_ldmil_sel_new[0]), .tm_l (~se)); `endif wire clk_mil1; `ifdef FPGA_SYN_CLK_EN `else bw_u1_ckenbuf_6x ckenmil1(.rclk (rclk), .clk (clk_mil1), .en_l (~ifc_ifd_ldmil_sel_new[1]), .tm_l (~se)); `endif wire clk_mil2; `ifdef FPGA_SYN_CLK_EN `else bw_u1_ckenbuf_6x ckenmil2(.rclk (rclk), .clk (clk_mil2), .en_l (~ifc_ifd_ldmil_sel_new[2]), .tm_l (~se)); `endif wire clk_mil3; `ifdef FPGA_SYN_CLK_EN `else bw_u1_ckenbuf_6x ckenmil3(.rclk (rclk), .clk (clk_mil3), .en_l (~ifc_ifd_ldmil_sel_new[3]), .tm_l (~se)); `endif `ifdef FPGA_SYN_CLK_DFF dffe_s #(41) mil0(.din (newmil_entry_s), .en (~(~ifc_ifd_ldmil_sel_new[0])), .clk(rclk), .q (mil_entry0), .se (se), .si(), .so()); `else dff_s #(41) mil0(.din (newmil_entry_s), .clk (clk_mil0), .q (mil_entry0), .se (se), .si(), .so()); `endif `ifdef FPGA_SYN_CLK_DFF dffe_s #(41) mil1(.din (newmil_entry_s), .en (~(~ifc_ifd_ldmil_sel_new[1])), .clk(rclk), .q (mil_entry1), .se (se), .si(), .so()); `else dff_s #(41) mil1(.din (newmil_entry_s), .clk (clk_mil1), .q (mil_entry1), .se (se), .si(), .so()); `endif `ifdef FPGA_SYN_CLK_DFF dffe_s #(41) mil2(.din (newmil_entry_s), .en (~(~ifc_ifd_ldmil_sel_new[2])), .clk(rclk), .q (mil_entry2), .se (se), .si(), .so()); `else dff_s #(41) mil2(.din (newmil_entry_s), .clk (clk_mil2), .q (mil_entry2), .se (se), .si(), .so()); `endif `ifdef FPGA_SYN_CLK_DFF dffe_s #(41) mil3(.din (newmil_entry_s), .en (~(~ifc_ifd_ldmil_sel_new[3])), .clk(rclk), .q (mil_entry3), .se (se), .si(), .so()); `else dff_s #(41) mil3(.din (newmil_entry_s), .clk (clk_mil3), .q (mil_entry3), .se (se), .si(), .so()); `endif assign ifd_ifc_newdestid_s = {imiss_paddr_s[39], imiss_paddr_s[`BANK_ID_HI:`BANK_ID_LO]}; assign ifd_ifc_destid0 = {mil_entry0[39], mil_entry0[`BANK_ID_HI:`BANK_ID_LO]}; assign ifd_ifc_destid1 = {mil_entry1[39], mil_entry1[`BANK_ID_HI:`BANK_ID_LO]}; assign ifd_ifc_destid2 = {mil_entry2[39], mil_entry2[`BANK_ID_HI:`BANK_ID_LO]}; assign ifd_ifc_destid3 = {mil_entry3[39], mil_entry3[`BANK_ID_HI:`BANK_ID_LO]}; assign ifd_ifc_instoffset0 = mil_entry0[3:2]; assign ifd_ifc_instoffset1 = mil_entry1[3:2]; assign ifd_ifc_instoffset2 = mil_entry2[3:2]; assign ifd_ifc_instoffset3 = mil_entry3[3:2]; // MIL Request Out mux dp_mux4ds #(41) milreq_mux (.dout (mil_pcxreq_d), .in0 ({mil_entry0[42:2]}), .in1 ({mil_entry1[42:2]}), .in2 ({mil_entry2[42:2]}), .in3 ({mil_entry3[42:2]}), .sel0_l (ifc_ifd_milreq_sel_d_l[0]), .sel1_l (ifc_ifd_milreq_sel_d_l[1]), .sel2_l (ifc_ifd_milreq_sel_d_l[2]), .sel3_l (ifc_ifd_milreq_sel_d_l[3])); // Next PCX Request Mux // dp_mux3ds #(44) nxtpcx_mux (.dout (pcxreq_d), // .in0 (mil_pcxreq_d), // .in1 (44'bx), // .in2 (pcxreq_e), // .sel0_l (ifc_ifd_nxtpcx_sel_new_d_l), // .sel1_l (ifc_ifd_nxtpcx_sel_err_d_l), // .sel2_l (ifc_ifd_nxtpcx_sel_prev_d_l)); // TBD: If destid == any L2 bank, need to zero out bit 4 for Rams // -- done assign ifd_ifc_pcxline_d[4:2] = mil_pcxreq_d[4:2]; assign pcxreq_d[42:5] = mil_pcxreq_d[42:5]; assign pcxreq_d[4:2] = ifc_ifd_pcxline_adj_d[4:2]; // assign pcxreq_d[1:0] = mil_pcxreq_d[1:0]; // dont need this dff_s #(41) pcxreq_reg (.din (pcxreq_d), .clk (clk), .q (pcxreq_e), .se (se), .si(), .so()); // CHANGE to regular dff // dffe #(44) pcxreq_reg (.din (pcxreq_d), // .clk (clk), // .q (pcxreq_e), // .en (ifc_ifd_nxtpcx_sel_new_d), // .se (se), .si(), .so()); // PCX Req Reg -- req type is 5 bits assign ifu_lsu_pcxpkt_e = {ifc_ifd_reqvalid_e, // 51 - valid ifc_ifd_errinv_e, // 50 - inv all ways ifc_ifd_uncached_e, // 49 - not cacheable {`IMISS_RQ}, // 48:44 - req type pcxreq_e[41:40], // 43:42 - rep way ifc_ifd_thrid_e[1:0], // 41:40 - thrid pcxreq_e[39:2], // 39:2 - word address 2'b0}; // force to zero //---------------------------------------------------------------------- // Fill Return Address //---------------------------------------------------------------------- // MIL Fill Return Mux dp_mux4ds #(41) milfill_mux(.dout (fill_addr_i2), .in0 ( mil_entry0), .in1 ( mil_entry1), .in2 ( mil_entry2), .in3 ( mil_entry3), .sel0_l (ifc_ifd_milfill_sel_i2_l[0]), .sel1_l (ifc_ifd_milfill_sel_i2_l[1]), .sel2_l (ifc_ifd_milfill_sel_i2_l[2]), .sel3_l (ifc_ifd_milfill_sel_i2_l[3])); assign ifd_ifc_miladdr4_i2[3:0] = {mil_entry3[4], mil_entry2[4], mil_entry1[4], mil_entry0[4]}; assign ifd_ifc_iobpkt_i2 = fill_addr_i2[39]; assign fill_addr_adj = {fill_addr_i2[42:5], ifc_ifd_filladdr4_i2, fill_addr_i2[3:2]}; // determine if this is cacheable in I$ // moved to ifqctl // assign ifd_ifc_uncached_i2 = fill_addr_i2[43]; // merged with addren mux to save some timing dp_mux4ds #(41) icadr_mux(.dout (icaddr_i2), .in0 (fill_addr_adj), .in1 (asi_addr_i2), .in2 (bist_addr_i2), .in3 ({wraddr_f[42:4], 2'b0}), .sel0_l (ifc_ifd_addr_sel_fill_i2_l), .sel1_l (ifc_ifd_addr_sel_asi_i2_l), .sel2_l (ifc_ifd_addr_sel_bist_i2_l), .sel3_l (ifc_ifd_addr_sel_old_i2_l)); // way, 32B line sel assign ifd_inv_wrway_i2 = icaddr_i2[41:40]; // dp_mux2es #(39) addren_mux(.dout (wraddr_i2), // .in0 (wraddr_f), // .in1 (icaddr_i2[42:4]), // .sel (ifc_ifd_ifqadv_i2)); dff_s #(39) wraddr_reg(.din (icaddr_i2[42:4]), .clk (clk), .q (wraddr_f[42:4]), .se (se), .si(), .so()); // tag = parity bit + `IC_TAG_SZ bits of address assign ifq_erb_wrindex_f = wraddr_f[`IC_IDX_HI:4]; assign ifq_ict_wrtag_f = {wraddr_f[42], wraddr_f[`IC_TAG_HI:`IC_TAG_LO]}; assign ifq_icd_index_bf = icaddr_i2[`IC_IDX_HI:2]; assign ifq_icd_wrway_bf = icaddr_i2[41:40]; //---------------------------------------------------------------------- // Fill Return Data //---------------------------------------------------------------------- // IFQ-IBUF // inq is the same size as the cpx_width // inq is replaced with a single flop, ibuf // ibuf enable mux // dp_mux2es #(`CPX_WIDTH) ifqen_mux(.dout (inq_cpxpkt_nxt), // .in0 (inq_cpxpkt_i1), // .in1 (lsu_ifu_cpxpkt_i1), // .sel (ifc_ifd_ld_inq_i1)); wire clk_ibuf1; `ifdef FPGA_SYN_CLK_EN `else bw_u1_ckenbuf_6x ckenibuf(.rclk (rclk), .clk (clk_ibuf1), .en_l (~ifc_ifd_ld_inq_i1), .tm_l (~se)); `endif `ifdef FPGA_SYN_CLK_DFF dffe_s #(`CPX_WIDTH) ibuf(.din (lsu_ifu_cpxpkt_i1), .q (inq_cpxpkt_i1), .en (~(~ifc_ifd_ld_inq_i1)), .clk(rclk), .se (se), .si(), .so()); `else dff_s #(`CPX_WIDTH) ibuf(.din (lsu_ifu_cpxpkt_i1), .q (inq_cpxpkt_i1), .clk (clk_ibuf1), .se (se), .si(), .so()); `endif assign ifd_ifc_cpxreq_i1 = {inq_cpxpkt_i1[`CPX_VLD], inq_cpxpkt_i1[`CPX_REQFIELD]}; // ifq operand bypass mux // fill pkt is 128d+2w+2t+3iw+1v+1nc+4r = 140 dp_mux4ds #(`CPX_WIDTH) ifq_bypmux(.dout (ifqop_i1), .in0 (fwd_data_pkt), .in1 (inq_cpxpkt_i1), .in2 (stxa_data_pkt), .in3 (lsu_ifu_cpxpkt_i1), .sel0_l (ifc_ifd_ifqbyp_sel_fwd_l), .sel1_l (ifc_ifd_ifqbyp_sel_inq_l), .sel2_l (ifc_ifd_ifqbyp_sel_asi_l), .sel3_l (ifc_ifd_ifqbyp_sel_lsu_l)); wire clk_ifqop; `ifdef FPGA_SYN_CLK_EN `else bw_u1_ckenbuf_6x ckenifop(.rclk (rclk), .clk (clk_ifqop), .en_l (ifc_ifd_ifqbyp_en_l), .tm_l (~se)); `endif `ifdef FPGA_SYN_CLK_DFF dffe_s #(`CPX_WIDTH) ifqop_reg(.din (ifqop_i1), .q (ifqop_i2), .en (~(ifc_ifd_ifqbyp_en_l)), .clk(rclk), .se (se), .si(), .so()); `else dff_s #(`CPX_WIDTH) ifqop_reg(.din (ifqop_i1), .q (ifqop_i2), .clk (clk_ifqop), .se (se), .si(), .so()); `endif assign ifd_inv_ifqop_i2 = ifqop_i2; // switch condition pre decode sparc_ifu_swpla swpla0(.in (ifqop_i2[31:0]), .out (swc_i2[0])); sparc_ifu_swpla swpla1(.in (ifqop_i2[63:32]), .out (swc_i2[1])); sparc_ifu_swpla swpla2(.in (ifqop_i2[95:64]), .out (swc_i2[2])); sparc_ifu_swpla swpla3(.in (ifqop_i2[127:96]), .out (swc_i2[3])); // Add Parity to each inst. sparc_ifu_par32 par0(.in (ifqop_i2[31:0]), .out (par_i2[0])); sparc_ifu_par32 par1(.in (ifqop_i2[63:32]), .out (par_i2[1])); sparc_ifu_par32 par2(.in (ifqop_i2[95:64]), .out (par_i2[2])); sparc_ifu_par32 par3(.in (ifqop_i2[127:96]), .out (par_i2[3])); // add 8 xor gates in the dp // assign parity_i2 = par_i2 ^ swc_i2 ^ {4{ifc_ifd_insert_pe}}; // assign tag_par_i2 = par_i2[0] ^ ifc_ifd_insert_pe; // Make the par32 cell above, par33 and include cpxue_i2 assign parity_i2 = par_i2 ^ swc_i2 ^ {4{ifd_ifc_cpxue_i2}}; assign tag_par_i2 = par_i2[0] ^ ifd_ifc_cpxue_i2; // parity, swc, inst[31:0] assign icdata_i2 = {parity_i2[3], ifqop_i2[127:96], swc_i2[3], parity_i2[2], ifqop_i2[95:64], swc_i2[2], parity_i2[1], ifqop_i2[63:32], swc_i2[1], parity_i2[0], ifqop_i2[31:0], swc_i2[0]}; // write data to icache assign ifq_icd_wrdata_i2 = icdata_i2; // very critical assign ifd_ifc_cpxreq_nxt = ifqop_i1[`CPX_REQFIELD]; assign ifd_ifc_cpxthr_nxt = ifqop_i1[`CPX_THRFIELD]; assign ifd_ifc_cpxvld_i2 = ifqop_i2[`CPX_VLD]; assign ifd_ifc_4bpkt_i2 = ifqop_i2[`CPX_IF4B]; assign ifd_ifc_cpxce_i2 = ifqop_i2[`CPX_ERR_LO]; assign ifd_ifc_cpxue_i2 = ifqop_i2[(`CPX_ERR_LO + 1)]; assign ifd_ifc_cpxms_i2 = ifqop_i2[(`CPX_ERR_LO + 2)]; assign ifd_ifc_cpxnc_i2 = ifqop_i2[`CPX_NC]; assign ifd_ifc_fwd2ic_i2 = ifqop_i2[103]; // instr sel mux to write to thread inst regsiter in S stage // instr is always BIG ENDIAN dp_mux4ds #(33) fillinst_mux(.dout (ifq_fdp_fill_inst), .in0 (icdata_i2[134:102]), .in1 (icdata_i2[100:68]), .in2 (icdata_i2[66:34]), .in3 (icdata_i2[32:0]), .sel0_l (ifc_ifd_finst_sel_l[0]), .sel1_l (ifc_ifd_finst_sel_l[1]), .sel2_l (ifc_ifd_finst_sel_l[2]), .sel3_l (ifc_ifd_finst_sel_l[3])); // synopsys translate_off //`ifdef DEFINE_0IN //`else // always @ (ifq_fdp_fill_inst or ifd_ifc_cpxreq_i2) // if (((^ifq_fdp_fill_inst[32:0]) == 1'bx) && (ifd_ifc_cpxreq_i2 == `CPX_IFILLPKT)) // begin // $display("ifqdp.v: Imiss Return val = %h\n", ifqop_i2); // $error("IFQCPX", "Error: X's detected in Imiss Return Inst %h", // ifq_fdp_fill_inst[31:0]); // end //`endif // synopsys translate_on // TBD: 1. inv way in fill pkt -- DONE // 2. inv packet -- DONE // 3. DFT pkt from TAP -- NO NEED // 4. Ld pkt to invalidate i$ -- DONE //---------------------------------------------------------------------- // ASI Access //---------------------------------------------------------------------- // mux stxa pkt into the cpx assign stxa_data_pkt[`CPX_VLD] = 1'b0; // vbits and parity are muxed into the cpxreq assign stxa_data_pkt[`CPX_REQFIELD] = {1'b1, lsu_ifu_stxa_data[34:32]}; // assign stxa_data_pkt[`CPX_THRFIELD] = lsu_ifu_asi_thrid[1:0]; assign stxa_data_pkt[`CPX_THRFIELD] = 2'b0; // use parity to insert error in icache inst or tag assign stxa_data_pkt[(`CPX_ERR_LO + 1)] = lsu_ifu_stxa_data[32]; assign stxa_data_pkt[127:0] = {4{lsu_ifu_stxa_data[31:0]}}; // other bits need to be tied off assign stxa_data_pkt[133:128] = 6'b0; assign stxa_data_pkt[137:136] = 2'b0; assign stxa_data_pkt[139] = 1'b0; // format fwd data pkt in a similar way assign fwd_data_pkt[`CPX_VLD:(`CPX_ERR_LO + 2)] = ifqop_i2[`CPX_VLD:(`CPX_ERR_LO + 2)]; assign fwd_data_pkt[(`CPX_ERR_LO + 1)] = ifqop_i2[32]; assign fwd_data_pkt[`CPX_ERR_LO:128] = ifqop_i2[`CPX_ERR_LO:128]; assign fwd_data_pkt[127:0] = {4{ifqop_i2[31:0]}}; dff_s #(16) stxa_ff(.din (lsu_ifu_stxa_data[47:32]), .q (ifq_erb_asidata_i2[47:32]), .clk (clk), .se(se), .si(), .so()); assign ifq_erb_asidata_i2[31:0] = ifqop_i2[31:0]; // va[63:32] is truncated // In this architecture we only need va[17:0] // rest of the bits ar ehere only for the address range check // 12 new muxes (10 for addr, 2 for way) // CHANGE: this mux has been moved before the asi_addr_reg, rather // than after. // Use mux flop soffm2? dp_mux2es #(12) asifwd_mx(.dout (asi_fwd_index[13:2]), .in0 ({lsu_ifu_asi_addr[17:16], // asi way lsu_ifu_asi_addr[12:3]}), // asi addr .in1 ({ifqop_i2[81:80], // fwd rq way ifqop_i2[76:67]}), // fwd rq addr .sel (ifc_ifd_idx_sel_fwd_i2)); assign asi_va_i1 = {asi_fwd_index[13:12], lsu_ifu_asi_addr[15:13], asi_fwd_index[11:2], lsu_ifu_asi_addr[2:0]}; dff_s #(18) asi_addr_reg(.din (asi_va_i1[17:0]), // 15:13 is not used .q (asi_va_i2[17:0]), .clk (clk), .se (se), .si(), .so()); // 16b zero cmp: leave out bit 3!! (imask is 0x8) assign ifd_ifc_asi_vachklo_i2 = (|asi_va_i2[16:4]) | (|asi_va_i2[2:0]); // mux in ifqop and asi_va_i2 to create new asi va? // asi va is shifted by 1 bit to look like 64b op assign ifd_ifc_asiaddr_i2[3:2] = asi_va_i2[4:3]; assign asi_addr_i2 = {tag_par_i2, // tag parity 42 asi_va_i2[17:16], // way 41:40 ifqop_i2[27:0], // tag 39:12 asi_va_i2[12:3] // index 11:2 }; // bist has to go to icache in the same cycle // cannot flop it assign bist_addr_i2 = {1'b0, // par mbist_icache_way[1:0], // way 41:40 28'b0, // tag 39:12 mbist_icache_index[7:0], // index 11:4 mbist_icache_word, // 3 1'b0 }; // floating signals sink #(2) s0(.in (imiss_paddr_s[1:0])); sink s1(.in (pcxreq_e[42])); sink s2(.in (fill_addr_i2[4])); endmodule // sparc_ifu_ifqdp
Go to most recent revision | Compare with Previous | Blame | View Log