URL
https://opencores.org/ocsvn/sparc64soc/sparc64soc/trunk
Subversion Repositories sparc64soc
[/] [sparc64soc/] [trunk/] [T1-CPU/] [ifu/] [sparc_ifu_mbist.v] - Rev 4
Go to most recent revision | Compare with Previous | Blame | View Log
// ========== Copyright Header Begin ========================================== // // OpenSPARC T1 Processor File: sparc_ifu_mbist.v // Copyright (c) 2006 Sun Microsystems, Inc. All Rights Reserved. // DO NOT ALTER OR REMOVE COPYRIGHT NOTICES. // // The above named program is free software; you can redistribute it and/or // modify it under the terms of the GNU General Public // License version 2 as published by the Free Software Foundation. // // The above named program is distributed in the hope that it will be // useful, but WITHOUT ANY WARRANTY; without even the implied warranty of // MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU // General Public License for more details. // // You should have received a copy of the GNU General Public // License along with this work; if not, write to the Free Software // Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301, USA. // // ========== Copyright Header End ============================================ /////////////////////////////////////////////////////////////////////////////// // // Description: Memory BIST Controller for the L1 ICache and DCache // Block Type: Control Block // Module: mbist_engine // /////////////////////////////////////////////////////////////////////////////// module sparc_ifu_mbist( mbist_dcache_read, mbist_dcache_write, mbist_dcache_word, mbist_dcache_index, mbist_dcache_way, mbist_icache_read, mbist_icache_write, mbist_icache_index, mbist_icache_word, mbist_icache_way, mbist_icache_wdata, mbist_dcache_wdata, mbist_done, mbist_dcache_fail, mbist_icache_fail, rclk, mbist_start, mbist_ifq_run_bist, mbist_userdata_mode, mbist_bisi_mode, mbist_loop_mode, mbist_loop_on_address, mbist_stop_on_fail, mbist_stop_on_next_fail, mbist_dcache_data_in, mbist_icache_data_in, grst_l, arst_l, mbist_si, mbist_so, mbist_se ); // ///////////////////////////////////////////////////////////////////////////// // Outputs // ///////////////////////////////////////////////////////////////////////////// output mbist_dcache_read; output mbist_dcache_write; output mbist_dcache_word; output[6:0] mbist_dcache_index; output[1:0] mbist_dcache_way; output mbist_icache_read; output mbist_icache_write; output[7:0] mbist_icache_index; output mbist_icache_word; output[1:0] mbist_icache_way; output mbist_ifq_run_bist; output[7:0] mbist_icache_wdata; output[7:0] mbist_dcache_wdata; output mbist_done; output mbist_dcache_fail; output mbist_icache_fail; output mbist_so; // ///////////////////////////////////////////////////////////////////////////// // Inputs // ///////////////////////////////////////////////////////////////////////////// input rclk; input mbist_si; input mbist_se; input grst_l; input arst_l; input mbist_start; input mbist_userdata_mode; input mbist_bisi_mode; input mbist_loop_mode; input mbist_loop_on_address; input mbist_stop_on_fail; input mbist_stop_on_next_fail; input[71:0] mbist_dcache_data_in; input[67:0] mbist_icache_data_in; // ///////////////////////////////////////////////////////////////////////////// // Wires // ///////////////////////////////////////////////////////////////////////////// wire [7:0] config_in; wire [7:0] config_out; wire start_transition; wire reset_engine; wire loop; wire run; wire bisi; wire userdata_mode; wire stop_on_fail; wire stop_on_next_fail; wire loop_on_address; wire [7:0] userdata_in; wire [7:0] userdata_out; wire [6:0] useradd_in; wire [6:0] useradd_out; wire [20:0] control_in; wire [20:0] control_out; wire msb; wire array_sel; wire [1:0] data_control; wire address_mix; wire [2:0] march_element; wire [9:0] array_address; wire dcache_sel; wire [1:0] read_write_control; wire [20:0] qual_control_out; wire four_cycle_march; wire [9:0] add; wire upaddress_march; wire [10:0] mbist_address; wire array_write; wire array_read; wire initialize; wire fail; wire true_data; wire [7:0] data_pattern; wire second_time_through; wire icache_sel; wire dc_read_pipe_out1; wire dc_read_pipe_out2; wire dcache_piped_read; wire ic_read_pipe_out1; wire ic_read_pipe_out2; wire icache_piped_read; wire [7:0] data_pipe_out1; wire [7:0] data_pipe_out2; wire [10:0] add_pipe_out1; wire [10:0] add_pipe_out2; wire [9:0] dcache_piped_address; wire [10:0] icache_piped_address; wire [1:0] fail_reg_in; wire [1:0] fail_reg_out; wire qual_dcache_fail; wire qual_icache_fail; wire beyond_last_fail; wire dcache_fail; wire icache_fail; wire mismatch, mbist_word_sel; wire [71:0] expect_data; wire [71:0] compare_data; wire qual_fail, dcache_data_sel; wire [10:0] fail_add_reg_in; wire [10:0] fail_add_reg_out; wire [71:0] fail_data_reg_in; wire [71:0] fail_data_reg_out; wire [20:0] fail_control_reg_in; wire [20:0] fail_control_reg_out; wire mbist_icache_read_bf, mbist_icache_write_bf; wire [71:0] compare_data_bf; wire msb_rst, msb_d1_rst, msb_d2_rst, msb_d3_rst, mbist_done_int; wire msb_d1, msb_d2, msb_d3, msb_d4, mbist_reset_l, mbist_reset; //// reset buffer //// dffrl_async rstff(.din (grst_l), .q (mbist_reset_l), .clk (rclk), .se(mbist_se), .si(), .so(), .rst_l (arst_l)); assign mbist_reset = ~mbist_reset_l; // ///////////////////////////////////////////////////////////////////////////// // // MBIST Config Register // // ///////////////////////////////////////////////////////////////////////////// // // A low to high transition on mbist_start will reset and start the engine. // mbist_start must remain active high for the duration of MBIST. // If mbist_start deasserts the engine will stop but not reset. // Once MBIST has completed mbist_done will assert and the fail status // signals will be valid. // To run MBIST again the mbist_start signal must transition low then high. // // Loop on Address will disable the address mix function. // // ///////////////////////////////////////////////////////////////////////////// dff_s #(8) config_reg ( .clk ( rclk ), .din ( config_in[7:0] ), .q ( config_out[7:0] ), .se(mbist_se), .si(), .so()); assign config_in[0] = mbist_start; assign config_in[1] = config_out[0]; assign start_transition = config_out[0] & ~config_out[1]; assign reset_engine = mbist_reset | start_transition | ((loop | loop_on_address) & mbist_done); assign run = config_out[1] & ~mbist_done_int; assign mbist_ifq_run_bist = run; assign config_in[2] = start_transition ? mbist_bisi_mode: config_out[2]; assign bisi = config_out[2]; assign config_in[3] = start_transition ? mbist_userdata_mode: config_out[3]; assign userdata_mode = config_out[3]; assign config_in[4] = start_transition ? mbist_loop_mode: config_out[4]; assign loop = config_out[4]; assign config_in[5] = start_transition ? mbist_stop_on_fail: config_out[5]; assign stop_on_fail = config_out[5]; assign config_in[6] = start_transition ? mbist_stop_on_next_fail: config_out[6]; assign stop_on_next_fail = config_out[6]; assign config_in[7] = start_transition ? mbist_loop_on_address: config_out[7]; assign loop_on_address = config_out[7]; dff_s #(8) userdata_reg ( .clk ( rclk ), .din ( userdata_in[7:0] ), .q ( userdata_out[7:0] ), .se(mbist_se), .si(), .so()); assign userdata_in[7:0] = userdata_out[7:0]; dff_s #(7) user_address_reg ( .clk ( rclk ), .din ( useradd_in[6:0] ), .q ( useradd_out[6:0] ), .se(mbist_se), .si(), .so()); assign useradd_in[6:0] = useradd_out[6:0]; // ///////////////////////////////////////////////////////////////////////////// // // MBIST Control Register // // ///////////////////////////////////////////////////////////////////////////// // Remove Address mix disable before delivery // ///////////////////////////////////////////////////////////////////////////// dff_s #(21) control_reg ( .clk ( rclk ), .din ( control_in[20:0] ), .q ( control_out[20:0] ), .se(mbist_se), .si(), .so()); assign msb = control_out[20]; assign array_sel = control_out[19]; assign data_control[1:0] = userdata_mode ? 2'b11 : control_out[18:17]; assign address_mix = loop_on_address ? 1'b1: control_out[16]; assign mbist_word_sel = loop_on_address ? 1'b1 : control_out[15]; assign march_element[2:0] = control_out[14:12]; assign array_address[9:0] = loop_on_address ? {6'h3f, control_out[5:2]}: (dcache_sel & ~bisi) ? {1'd1, control_out[10:2]}: control_out[11:2]; assign read_write_control[1:0] = control_out[1:0]; assign qual_control_out[20:0] = {msb, array_sel, data_control[1:0], address_mix, mbist_word_sel, march_element[2:0], array_address[9:0], read_write_control[1:0]}; // added by Chandra wire [1:0] add_data_int; wire [20:0] add_data; wire [9:0] mbist_address_bf; assign add_data_int[1:0] = four_cycle_march ? 2'b01: 2'b10; assign add_data[20:0] = qual_control_out[20:0] + {19'd0, add_data_int}; assign control_in[20:0] = {21{~run & ~reset_engine}} & qual_control_out | {21{run & ~reset_engine}} & add_data; assign add[9:0] = upaddress_march ? array_address[9:0]: ~array_address[9:0]; assign mbist_address_bf[9:0] = loop_on_address ? {useradd_out[5:0], add[3:0]}: address_mix ? (dcache_sel ? ({add[9:8], add[0], add[7:1]}) : ({add[9:8], add[6:0], add[7]})) : add[9:0]; assign array_write = ~run ? 1'b0: four_cycle_march ? (read_write_control[0] ^ read_write_control[1]): read_write_control[1]; assign array_read = ~array_write && run && ~initialize; assign mbist_done_int = (stop_on_fail && fail) || (stop_on_next_fail && fail) || (bisi && march_element[0]) || msb; assign mbist_done = (stop_on_fail && fail) || (stop_on_next_fail && fail) || (bisi && march_element[0]) || msb_d4; //////////// //////////// wire [7:0] mbist_write_data_bf; assign mbist_write_data_bf[7:0] = true_data ? data_pattern[7:0]: ~data_pattern[7:0]; assign mbist_dcache_wdata[7:0] = mbist_write_data_bf[7:0]; assign second_time_through = ~loop_on_address && address_mix; assign initialize = (march_element[2:0] == 3'b000) && ~second_time_through; assign four_cycle_march = (march_element[2:0] == 3'h6) || (march_element[2:0] == 3'h7); assign upaddress_march = (march_element[2:0] == 3'h0) || (march_element[2:0] == 3'h1) || (march_element[2:0] == 3'h2) || (march_element[2:0] == 3'h6); assign true_data = read_write_control[1] ^ ~march_element[0]; assign data_pattern[7:0] = userdata_mode ? userdata_out[7:0]: bisi ? 8'hFF: // true_data function will invert to 8'h00 (data_control[1:0] == 2'h0) ? 8'hAA: (data_control[1:0] == 2'h1) ? 8'h99: (data_control[1:0] == 2'h2) ? 8'hCC: 8'h00; assign dcache_sel = ~array_sel; assign icache_sel = array_sel; //////////// //////////// assign mbist_dcache_index[6:0] = mbist_address[6:0]; assign mbist_dcache_way[1:0] = (mbist_address[8:7] & {2{config_out[0]}}); assign mbist_dcache_word = mbist_address[10]; assign mbist_dcache_read = dcache_sel && array_read; assign mbist_dcache_write = (dcache_sel || bisi) && array_write; assign mbist_icache_index[7:0] = mbist_address[7:0]; assign mbist_icache_way[1:0] = (mbist_address[9:8] & {2{config_out[0]}}); assign mbist_icache_word = mbist_address[10]; assign mbist_icache_read_bf = icache_sel && array_read; assign mbist_icache_write_bf = (icache_sel || bisi) && array_write; //////////////////////// //////////////////////// assign msb_rst = msb & ~reset_engine; dff_s #(1) msb_d1_inst( .clk ( rclk ), .din ( msb_rst ), .q ( msb_d1 ), .se(mbist_se), .si(), .so()); assign msb_d1_rst = msb_d1 & ~reset_engine; dff_s #(1) msb_d2_inst( .clk ( rclk ), .din ( msb_d1_rst ), .q ( msb_d2 ), .se(mbist_se), .si(), .so()); assign msb_d2_rst = msb_d2 & ~reset_engine; dff_s #(1) msb_d3_inst( .clk ( rclk ), .din ( msb_d2_rst ), .q ( msb_d3 ), .se(mbist_se), .si(), .so()); assign msb_d3_rst = msb_d3 & ~reset_engine; dff_s #(1) msb_d4_inst( .clk ( rclk ), .din ( msb_d3_rst ), .q ( msb_d4 ), .se(mbist_se), .si(), .so()); // ///////////////////////////////////////////////////////////////////////////// // Pipeline for Read, Data, and Address // ///////////////////////////////////////////////////////////////////////////// wire dc_read_pipe_out3, dc_read_pipe_out4, ic_read_pipe_out3, ic_read_pipe_out4; wire dc_read_pipe_out1_bf, dc_read_pipe_out2_bf, dc_read_pipe_out3_bf; wire ic_read_pipe_out1_bf, ic_read_pipe_out2_bf, ic_read_pipe_out3_bf; //////////// //////////// dff_s #(1) dc_read_pipe_reg1 ( .clk ( rclk ), .din ( mbist_dcache_read ), .q ( dc_read_pipe_out1 ), .se(mbist_se), .si(), .so()); assign dc_read_pipe_out1_bf = dc_read_pipe_out1 & ~reset_engine; dff_s #(1) dc_read_pipe_reg2 ( .clk ( rclk ), .din ( dc_read_pipe_out1_bf ), .q ( dc_read_pipe_out2 ), .se(mbist_se), .si(), .so()); assign dc_read_pipe_out2_bf = dc_read_pipe_out2 & ~reset_engine; dff_s #(1) dc_read_pipe_reg3 ( .clk ( rclk ), .din ( dc_read_pipe_out2_bf ), .q ( dc_read_pipe_out3 ), .se(mbist_se), .si(), .so()); assign dc_read_pipe_out3_bf = dc_read_pipe_out3 & ~reset_engine; assign dcache_data_sel = dc_read_pipe_out3_bf; dff_s #(1) dc_read_pipe_reg4 ( .clk ( rclk ), .din ( dc_read_pipe_out3_bf ), .q ( dc_read_pipe_out4 ), .se(mbist_se), .si(), .so()); assign dcache_piped_read = dc_read_pipe_out4 & ~reset_engine; //////////// //////////// dff_s #(1) ic_read_pipe_reg1 ( .clk ( rclk ), .din ( mbist_icache_read_bf ), .q ( ic_read_pipe_out1 ), .se(mbist_se), .si(), .so()); assign ic_read_pipe_out1_bf = ic_read_pipe_out1 & ~reset_engine; assign mbist_icache_read = ic_read_pipe_out1; dff_s #(1) ic_read_pipe_reg2 ( .clk ( rclk ), .din ( ic_read_pipe_out1_bf ), .q ( ic_read_pipe_out2 ), .se(mbist_se), .si(), .so()); assign ic_read_pipe_out2_bf = ic_read_pipe_out2 & ~reset_engine; dff_s #(1) ic_read_pipe_reg3 ( .clk ( rclk ), .din ( ic_read_pipe_out2_bf ), .q ( ic_read_pipe_out3 ), .se(mbist_se), .si(), .so()); assign ic_read_pipe_out3_bf = ic_read_pipe_out3 & ~reset_engine; dff_s #(1) ic_read_pipe_reg4 ( .clk ( rclk ), .din ( ic_read_pipe_out3_bf ), .q ( ic_read_pipe_out4 ), .se(mbist_se), .si(), .so()); assign icache_piped_read = ic_read_pipe_out4 & ~reset_engine; //////////// //////////// dff_s #(1) ic_write_pipe_reg1 ( .clk ( rclk ), .din ( mbist_icache_write_bf ), .q ( mbist_icache_write ), .se(mbist_se), .si(), .so()); //////////// //////////// wire [7:0] data_pipe_out3, data_pipe_out4; dff_s #(8) data_pipe_reg1 ( .clk ( rclk ), .din ( mbist_write_data_bf[7:0] ), .q ( data_pipe_out1[7:0] ), .se(mbist_se), .si(), .so()); assign mbist_icache_wdata = data_pipe_out1; dff_s #(8) data_pipe_reg2 ( .clk ( rclk ), .din ( data_pipe_out1[7:0] ), .q ( data_pipe_out2[7:0] ), .se(mbist_se), .si(), .so()); dff_s #(8) data_pipe_reg3 ( .clk ( rclk ), .din ( data_pipe_out2[7:0] ), .q ( data_pipe_out3[7:0] ), .se(mbist_se), .si(), .so()); dff_s #(8) data_pipe_reg4 ( .clk ( rclk ), .din ( data_pipe_out3[7:0] ), .q ( data_pipe_out4[7:0] ), .se(mbist_se), .si(), .so()); //////////// //////////// wire [10:0] add_pipe_out3, add_pipe_out4; wire mbist_word_sel_bf; assign mbist_word_sel_bf = loop_on_address ? useradd_out[6] : mbist_word_sel; dff_s #(11) add_pipe_reg1 ( .clk ( rclk ), .din ( {mbist_word_sel_bf, mbist_address_bf[9:0]} ), .q ( add_pipe_out1[10:0] ), .se(mbist_se), .si(), .so()); assign mbist_address = add_pipe_out1; dff_s #(11) add_pipe_reg2 ( .clk ( rclk ), .din ( add_pipe_out1[10:0] ), .q ( add_pipe_out2[10:0] ), .se(mbist_se), .si(), .so()); dff_s #(11) add_pipe_reg3 ( .clk ( rclk ), .din ( add_pipe_out2[10:0] ), .q ( add_pipe_out3[10:0] ), .se(mbist_se), .si(), .so()); dff_s #(11) add_pipe_reg4 ( .clk ( rclk ), .din ( add_pipe_out3[10:0] ), .q ( add_pipe_out4[10:0] ), .se(mbist_se), .si(), .so()); assign dcache_piped_address[9:0] = {add_pipe_out4[10], add_pipe_out4[8:0]}; assign icache_piped_address[10:0] = add_pipe_out4[10:0]; // ///////////////////////////////////////////////////////////////////////////// // Shared Fail Detection // ///////////////////////////////////////////////////////////////////////////// dff_s #(2) fail_reg ( .clk ( rclk ), .din ( fail_reg_in[1:0] ), .q ( fail_reg_out[1:0] ), .se(mbist_se), .si(), .so()); assign fail_reg_in[1:0] = reset_engine ? 2'b0: {qual_dcache_fail,qual_icache_fail} | fail_reg_out[1:0]; assign qual_dcache_fail = (!stop_on_next_fail || (stop_on_next_fail && beyond_last_fail)) && dcache_fail; assign qual_icache_fail = (!stop_on_next_fail || (stop_on_next_fail && beyond_last_fail)) && icache_fail; assign dcache_fail = dcache_piped_read && mismatch; assign icache_fail = icache_piped_read && mismatch; // added by Chandra // assign expect_data[71:0] = { ({4{dcache_piped_read}} & data_pipe_out4[7:4]), // (icache_piped_read ? {2{data_pipe_out4[1:0]}} : data_pipe_out4[3:0]), {8{data_pipe_out4[7:0]}}}; assign expect_data[71:0] = { ({4{dcache_piped_read}} & data_pipe_out4[7:4]), (icache_piped_read ? {2{data_pipe_out4[1:0]}} : data_pipe_out4[3:0]), {7{data_pipe_out4[7:0]}}, (icache_piped_read ? data_pipe_out4[7:4] : data_pipe_out4[3:0]), data_pipe_out4[3:0] }; assign compare_data_bf[71:0] = dcache_data_sel ? mbist_dcache_data_in[71:0]: {4'h0,mbist_icache_data_in[67:0]}; dff_s #(72) compare_data_inst( .clk ( rclk ), .din ( compare_data_bf[71:0] ), .q ( compare_data[71:0] ), .se(mbist_se), .si(), .so()); assign mismatch = expect_data[71:0] != compare_data[71:0]; assign mbist_dcache_fail = fail_reg_out[1]; assign mbist_icache_fail = fail_reg_out[0]; assign fail = |fail_reg_out[1:0]; assign qual_fail = qual_dcache_fail || qual_icache_fail; // ///////////////////////////////////////////////////////////////////////////// // Fail Address and Data Capture and Control Reg Store // ///////////////////////////////////////////////////////////////////////////// dff_s #(11) fail_add_reg( .clk ( rclk ), .din ( fail_add_reg_in[10:0] ), .q ( fail_add_reg_out[10:0] ), .se(mbist_se), .si(), .so()); assign fail_add_reg_in[10:0] = reset_engine ? 11'b0: qual_dcache_fail ? {1'b0,dcache_piped_address[9:0]}: qual_icache_fail ? icache_piped_address[10:0]: fail_add_reg_out[10:0]; dff_s #(72) fail_data_reg( .clk ( rclk ), .din ( fail_data_reg_in[71:0] ), .q ( fail_data_reg_out[71:0] ), .se(mbist_se), .si(), .so()); assign fail_data_reg_in[71:0] = reset_engine ? 72'b0: qual_fail ? compare_data[71:0]: fail_data_reg_out[71:0]; assign fail_control_reg_in[20:0] = (reset_engine && !mbist_stop_on_next_fail) ? 21'b0: qual_fail ? qual_control_out[20:0]: fail_control_reg_out[20:0]; dff_s #(21) fail_control_reg_inst( .clk ( rclk ), .din ( fail_control_reg_in[20:0] ), .q ( fail_control_reg_out[20:0] ), .se(mbist_se), .si(), .so()); //////// assign beyond_last_fail = qual_control_out[20:0] > fail_control_reg_out[20:0]; endmodule
Go to most recent revision | Compare with Previous | Blame | View Log