URL
https://opencores.org/ocsvn/sparc64soc/sparc64soc/trunk
Subversion Repositories sparc64soc
[/] [sparc64soc/] [trunk/] [T1-CPU/] [spu/] [spu_madp.v] - Rev 4
Go to most recent revision | Compare with Previous | Blame | View Log
// ========== Copyright Header Begin ========================================== // // OpenSPARC T1 Processor File: spu_madp.v // Copyright (c) 2006 Sun Microsystems, Inc. All Rights Reserved. // DO NOT ALTER OR REMOVE COPYRIGHT NOTICES. // // The above named program is free software; you can redistribute it and/or // modify it under the terms of the GNU General Public // License version 2 as published by the Free Software Foundation. // // The above named program is distributed in the hope that it will be // useful, but WITHOUT ANY WARRANTY; without even the implied warranty of // MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU // General Public License for more details. // // You should have received a copy of the GNU General Public // License along with this work; if not, write to the Free Software // Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301, USA. // // ========== Copyright Header End ============================================ //////////////////////////////////////////////////////////////////////// /* // Description: MA datapath . */ //////////////////////////////////////////////////////////////////////// //FPGA_SYN enables all FPGA related modifications `ifdef FPGA_SYN `define FPGA_SYN_CLK_EN `define FPGA_SYN_CLK_DFF `endif module spu_madp ( /*outputs*/ spu_madp_evedata, spu_madp_odddata, spu_mul_op2_data, spu_madp_m_lt_n, spu_madp_m_eq_n, spu_madp_store_data, spu_madp_cout_oprnd_sub_mod, spu_madp_e_eq_one, spu_madp_mpa_addr_out, spu_madp_perr, so, spu_mul_op1_data, spu_madp_maaddr_reg, spu_madp_ldxa_data, /*inputs*/ spu_mamul_oprnd2_wen, spu_mamul_oprnd2_bypass, mul_data_out, spu_mared_data_sel_l, spu_mared_rdn_wen, spu_mared_cin_oprnd_sub_mod, spu_maexp_e_data_wen, spu_maexp_shift_e, spu_maaddr_mpa_incr_val, spu_maaddr_mpa_wen, spu_maaddr_mpa_addrinc, spu_mactl_mpa_sel, spu_mactl_ldop, spu_mactl_madp_parflop_wen, spu_mactl_memmxsel_l, spu_mactl_force_perr, spu_mamem_rd_eve_data, spu_mamem_rd_odd_data, spu_mamul_oprnd1_mxsel_l, spu_maaddr_mamem_eveodd_sel_l, spu_mamul_oprnd1_wen, exu_spu_st_rs3_data_g2, lsu_spu_vload_data, spu_mactl_mactl_reg, spu_wen_maln_wen, spu_mactl_mpa_wen, spu_mactl_maaddr_wen, spu_mactl_manp_wen, spu_mactl_ldxa_data_w_sel_l, spu_mactl_ldxa_data_w_select, se, si, sehold, rclk); // --------------------------------------------------------- input rclk; input spu_mamul_oprnd2_wen; input spu_mamul_oprnd2_bypass; input [63:0] mul_data_out; input [3:0] spu_mared_data_sel_l; input spu_mared_rdn_wen; input spu_mared_cin_oprnd_sub_mod; input spu_maexp_e_data_wen; input spu_maexp_shift_e; input [4:0] spu_maaddr_mpa_incr_val; input spu_maaddr_mpa_wen; input spu_maaddr_mpa_addrinc; input spu_mactl_mpa_sel; input spu_mactl_ldop; input spu_mactl_madp_parflop_wen; input [2:0] spu_mactl_memmxsel_l; input spu_mactl_force_perr; input spu_wen_maln_wen; input spu_mactl_mpa_wen; input spu_mactl_maaddr_wen; input spu_mactl_manp_wen; input [3:0] spu_mactl_ldxa_data_w_sel_l; input spu_mactl_ldxa_data_w_select; input se; input si; input sehold; input [65:0] spu_mamem_rd_eve_data; input [65:0] spu_mamem_rd_odd_data; input [2:0] spu_mamul_oprnd1_mxsel_l; input [3:0] spu_maaddr_mamem_eveodd_sel_l; input spu_mamul_oprnd1_wen; input [63:0] exu_spu_st_rs3_data_g2; input [13:0] spu_mactl_mactl_reg; input [127:0] lsu_spu_vload_data; // --------------------------------------------------------- output [65:0] spu_madp_evedata; output [65:0] spu_madp_odddata; output [63:0] spu_mul_op2_data; output spu_madp_m_lt_n; output spu_madp_m_eq_n; output spu_madp_cout_oprnd_sub_mod; output [63:0] spu_madp_store_data; output spu_madp_e_eq_one; output [38:3] spu_madp_mpa_addr_out; output spu_madp_perr; output so; output [63:0] spu_mul_op1_data; output [47:0] spu_madp_maaddr_reg; output [63:0] spu_madp_ldxa_data; // --------------------------------------------------------- // --------------------------------------------------------- wire [47:0] spu_madp_maaddr_reg_int; wire [39:0] spu_madp_mpa_addr; wire [63:0] spu_madp_oprnd2_data; wire [64:0] oprand_minus_modulus_or_mpa; wire [63:0] spu_madp_modulus; //wire [63:0] spu_madp_modulus_b; wire [63:0] spu_madp_mpa_or_m,spu_madp_mpa_or_n_b; wire [39:0] spu_madp_mpa_mx; wire carry_out; wire [63:0] mulorred_data; wire [63:0] spu_madp_exp_e_data,spu_madp_exp_e_data_q; wire [63:0] mulorred_data_q; wire [63:0] mul_ldlower_data_mx; wire [1:0] mul_ldlower_data_par; wire [1:0] mem_ldupper_data_par; wire [1:0] mul_ldlower_data_par_pre; wire [1:0] mem_ldupper_data_par_pre; wire [63:0] mem_ldupper_data_mx; wire [65:0] spu_madp_odddata_mx; wire [63:0] spu_madp_mem_rd_data; wire [65:0] spu_madp_evedata_mx; wire [65:0] spu_mamem_rd_data_unbuf; wire [63:0] spu_mamem_rd_data; wire [1:0] spu_madp_rdmem_pargen; wire [38:3] spu_madp_mpa_reg; wire [63:0] spu_madp_manp_reg; wire [63:0] spu_madp_lnupper_data; wire [63:0] spu_madp_lnlower_data; // --------------------------------------------------------- // --------------------------------------------------------- // --------------------------------------------------------- wire testmode_l = ~se; // --------------------------------------------------------- // --------------------------------------------------------- // --------------------------------------------------------- // --------------------------------------------------------- // Arrange the parity bits accordingly wire [63:0] read_data_q; wire [1:0] spu_madp_par_data; dp_mux4ds #(66) mamem_rd_data_mx ( .in0 (spu_mamem_rd_eve_data[65:0]), .in1 (spu_mamem_rd_odd_data[65:0]), .in2 ({2'b11,64'h0000000000000000}), .in3 ({spu_madp_par_data[1:0],read_data_q[63:0]}),// added for dft to test downstream logic. .sel0_l (spu_maaddr_mamem_eveodd_sel_l[0]), .sel1_l (spu_maaddr_mamem_eveodd_sel_l[1]), .sel2_l (spu_maaddr_mamem_eveodd_sel_l[2]), .sel3_l (spu_maaddr_mamem_eveodd_sel_l[3]), .dout (spu_mamem_rd_data_unbuf[65:0])); assign spu_mamem_rd_data[63:0] = spu_mamem_rd_data_unbuf[63:0];// used internal decouple from critical path // make sure its buffered buf_x10 not critical wire mem_rddata_clk; `ifdef FPGA_SYN_CLK_EN `else clken_buf mem_rddata_lcd (.clk(mem_rddata_clk), .rclk(rclk), .enb_l(~spu_mamul_oprnd1_wen), .tmb_l(testmode_l)); `endif `ifdef FPGA_SYN_CLK_DFF dffe_s #(64) mem_rddata_ff ( .din(spu_mamem_rd_data_unbuf[63:0]) , .q(read_data_q[63:0]), .en (~(~spu_mamul_oprnd1_wen)), .clk(rclk), .se(1'b0),.si (),.so () ); `else dff_s #(64) mem_rddata_ff ( .din(spu_mamem_rd_data_unbuf[63:0]) , .q(read_data_q[63:0]), .clk (mem_rddata_clk), .se(1'b0),.si (),.so () ); `endif wire [63:0] spu_mul_op1_data_unbuf; dp_mux3ds #(64) oprnd1_mx ( .in0 (read_data_q[63:0]), .in1 (spu_mamem_rd_data_unbuf[63:0]), .in2 (spu_madp_manp_reg[63:0]), .sel0_l (spu_mamul_oprnd1_mxsel_l[0]), .sel1_l (spu_mamul_oprnd1_mxsel_l[1]), .sel2_l (spu_mamul_oprnd1_mxsel_l[2]), .dout (spu_mul_op1_data_unbuf[63:0])); assign spu_mul_op1_data[63:0] = spu_mul_op1_data_unbuf[63:0]; // this is critical going to mul unit. // --------- parity logic wire [1:0] spu_madp_mamem_rddata_par; assign spu_madp_mamem_rddata_par[1:0] = spu_mamem_rd_data_unbuf[65:64]; // its going out buffer. // place the following flop on the left handside. dff_s #(2) par_ff ( .din(spu_madp_mamem_rddata_par[1:0]) , .q(spu_madp_par_data[1:0]), .clk (rclk), .se(se), .si(), .so()); // upper=parity for [63:32], lower= parity for [31:0] wire spu_madp_upper_perr = spu_madp_par_data[1] ^ ~spu_madp_rdmem_pargen[1]; wire spu_madp_lower_perr = spu_madp_par_data[0] ^ ~spu_madp_rdmem_pargen[0]; assign spu_madp_perr = spu_madp_upper_perr | spu_madp_lower_perr; // ############################################################ // --------------------------------------------------------- // --------------------------------------------------------- // --------------------------------------------------------- wire spu_mactl_ldop_q; dff_s #(1) ldop_ff ( .din(spu_mactl_ldop) , .q(spu_mactl_ldop_q), .clk (rclk), .se(se),.si (),.so () ); wire spu_madp_ldop_q_buf1 = spu_mactl_ldop_q; wire spu_madp_ldop_q_buf2 = spu_mactl_ldop_q; // ############################################################ // ############################################################ // ############################################################ // --------------------------------------------------------- // ------------ OPERAND1 and OPERAND2 to mul unit ---------- // --------------------------------------------------------- // --------------------------------------------------------- // operand2 = A,M,ACCUM // operand1 = B,N,NP // --------------------------------------------------------- dp_mux2es #(64) oprnd2_mx2 ( .in0 (spu_mamem_rd_data[63:0]), .in1 (mul_data_out[63:0]), .sel (spu_mamul_oprnd2_bypass), .dout (spu_madp_oprnd2_data[63:0])); wire oprnd2_clk; `ifdef FPGA_SYN_CLK_EN `else clken_buf oprnd2_lcd ( .clk(oprnd2_clk), .rclk(rclk), .enb_l(~spu_mamul_oprnd2_wen), .tmb_l(testmode_l)); `endif `ifdef FPGA_SYN_CLK_DFF dffe_s #(64) oprnd2_ff ( .din(spu_madp_oprnd2_data[63:0]) , .q(spu_mul_op2_data[63:0]), .en (~(~spu_mamul_oprnd2_wen)), .clk(rclk), .se(1'b0),.si (),.so () ); `else dff_s #(64) oprnd2_ff ( .din(spu_madp_oprnd2_data[63:0]) , .q(spu_mul_op2_data[63:0]), .clk (oprnd2_clk), .se(1'b0),.si (),.so () ); `endif // ---------------------- // operand1 mux was moved to spu_mamem.v // ############################################################ // --------------------------------------------------------- // ------------ muxing of MPA with reduction operands ------ // --------------------------------------------------------- // --------------------------------------------------------- //assign spu_madp_modulus_b = ~spu_madp_modulus; wire spu_mactl_mpa_sel_q_upper,spu_mactl_mpa_sel_q_lower; dff_s #(1) spu_mactl_mpa_sel_upper_ff ( .din(spu_mactl_mpa_sel) , .q(spu_mactl_mpa_sel_q_upper), .clk (rclk), .se(1'b0),.si (),.so () ); dff_s #(1) spu_mactl_mpa_sel_lower_ff ( .din(spu_mactl_mpa_sel) , .q(spu_mactl_mpa_sel_q_lower), .clk (rclk), .se(1'b0),.si (),.so () ); wire spu_madp_mpa_sel_q_buf1_upper = spu_mactl_mpa_sel_q_upper; wire spu_madp_mpa_sel_q_buf1_lower = spu_mactl_mpa_sel_q_lower; wire spu_madp_mpa_sel_q_buf2_upper = spu_mactl_mpa_sel_q_upper; wire spu_madp_mpa_sel_q_buf2_lower = spu_mactl_mpa_sel_q_lower; dp_mux2es #(32) mpa_or_m_mx_upper ( .in0 (spu_mul_op2_data[63:32]), .in1 ({24'h000000,spu_madp_mpa_addr[39:32]}), .sel (spu_madp_mpa_sel_q_buf1_upper), .dout (spu_madp_mpa_or_m[63:32])); dp_mux2es #(32) mpa_or_m_mx_lower ( .in0 (spu_mul_op2_data[31:0]), .in1 (spu_madp_mpa_addr[31:0]), .sel (spu_madp_mpa_sel_q_buf1_lower), .dout (spu_madp_mpa_or_m[31:0])); /* dp_mux2es #(64) mpa_or_n_mx ( .in0 (spu_madp_modulus_b[63:0]), .in1 ({56'h00000000000000,3'b000,spu_maaddr_mpa_incr_val[4:0]}), .sel (spu_mactl_mpa_sel), .dout (spu_madp_mpa_or_n_b[63:0])); */ wire [4:0] spu_maaddr_mpa_incr_val_q; dff_s #(5) spu_maaddr_mpa_incr_val_ff ( .din(spu_maaddr_mpa_incr_val[4:0]) , .q(spu_maaddr_mpa_incr_val_q[4:0]), .clk (rclk), .se(1'b0), .si(), .so()); wire [4:0] spu_maaddr_mpa_incr_val_q_l = ~spu_maaddr_mpa_incr_val_q; wire [63:0] spu_madp_mpa_or_n; dp_mux2es #(32) mpa_or_n_mx_upper ( .in0 (spu_madp_modulus[63:32]), .in1 (32'hffffffff), .sel (spu_madp_mpa_sel_q_buf2_upper), .dout (spu_madp_mpa_or_n[63:32])); dp_mux2es #(32) mpa_or_n_mx_lower ( .in0 (spu_madp_modulus[31:0]), .in1 ({24'hffffff,3'b111,spu_maaddr_mpa_incr_val_q_l[4:0]}), .sel (spu_madp_mpa_sel_q_buf2_lower), .dout (spu_madp_mpa_or_n[31:0])); assign spu_madp_mpa_or_n_b = ~spu_madp_mpa_or_n; // ------------------------ dp_mux2es #(40) mpa_pa_iss_mx ( .in0 ({1'b0,spu_madp_mpa_reg[38:3],3'b000}), .in1 (oprand_minus_modulus_or_mpa[39:0]), .sel (spu_maaddr_mpa_addrinc), .dout (spu_madp_mpa_mx[39:0])); wire mpa_clk; `ifdef FPGA_SYN_CLK_EN `else clken_buf mpa_lcd ( .clk(mpa_clk), .rclk(rclk), .enb_l(~spu_maaddr_mpa_wen), .tmb_l(testmode_l)); `endif `ifdef FPGA_SYN_CLK_DFF dffe_s #(40) mpa_ff ( .din({spu_madp_mpa_mx[39:3],3'b000}) , .q(spu_madp_mpa_addr[39:0]), .en (~(~spu_maaddr_mpa_wen)), .clk(rclk), .se(1'b0),.si (),.so () ); `else dff_s #(40) mpa_ff ( .din({spu_madp_mpa_mx[39:3],3'b000}) , .q(spu_madp_mpa_addr[39:0]), .clk (mpa_clk), .se(1'b0),.si (),.so () ); `endif assign spu_madp_mpa_addr_out[38:3] = spu_madp_mpa_addr[38:3]; // ############################################################ // --------------------------------------------------------- // ------------ MOD REDUCTION DATAPATH --------------------- // --------------------------------------------------------- // --------------------------------------------------------- wire modulus_clk; `ifdef FPGA_SYN_CLK_EN `else clken_buf modulus_lcd ( .clk(modulus_clk), .rclk(rclk), .enb_l(~spu_mared_rdn_wen), .tmb_l(testmode_l)); `endif `ifdef FPGA_SYN_CLK_DFF dffe_s #(64) modulus_ff ( .din(spu_mamem_rd_data[63:0]) , .q(spu_madp_modulus[63:0]), .en (~(~spu_mared_rdn_wen)), .clk(rclk), .se(1'b0),.si (),.so () ); `else dff_s #(64) modulus_ff ( .din(spu_mamem_rd_data[63:0]) , .q(spu_madp_modulus[63:0]), .clk (modulus_clk), .se(1'b0),.si (),.so () ); `endif // USE 64BIT ADDER FROM LIB. assign oprand_minus_modulus_or_mpa[64:0] = {1'b0,spu_madp_mpa_or_m[63:0]} + {1'b0,spu_madp_mpa_or_n_b[63:0]} + {64'h0000000000000000,spu_mared_cin_oprnd_sub_mod}; assign carry_out = oprand_minus_modulus_or_mpa[64]; assign spu_madp_cout_oprnd_sub_mod = carry_out; assign spu_madp_m_lt_n = ~carry_out; // USE 64BIT COMPARATOR FROM LIB. assign spu_madp_m_eq_n = (spu_mul_op2_data[63:0] == spu_madp_modulus[63:0]); dp_mux4ds #(64) modred_data_mx3 ( .in0 (mul_data_out[63:0]), .in1 (64'h0000000000000000), // wr0tox .in2 (spu_mul_op2_data[63:0]), // wrmtox .in3 (oprand_minus_modulus_or_mpa[63:0]), // wrstox .sel0_l (spu_mared_data_sel_l[0]), .sel1_l (spu_mared_data_sel_l[1]), .sel2_l (spu_mared_data_sel_l[2]), .sel3_l (spu_mared_data_sel_l[3]), .dout (mulorred_data[63:0])); assign spu_madp_store_data[63:0] = spu_madp_modulus[63:0]; // ############################################################ // --------------------------------------------------------- // ------------ MOD EXPONENTIATION DATAPATH ---------------- // --------------------------------------------------------- // --------------------------------------------------------- dp_mux2es #(64) exp_e_data_mx ( .in0 (spu_mamem_rd_data[63:0]), .in1 ({spu_madp_exp_e_data_q[62:0],1'b0}), .sel (spu_maexp_shift_e), .dout (spu_madp_exp_e_data[63:0])); wire exp_e_data_clk; `ifdef FPGA_SYN_CLK_EN `else clken_buf exp_e_data_lcd ( .clk(exp_e_data_clk), .rclk(rclk), .enb_l(~spu_maexp_e_data_wen), .tmb_l(testmode_l)); `endif `ifdef FPGA_SYN_CLK_DFF dffe_s #(64) exp_e_data_ff ( .din(spu_madp_exp_e_data[63:0]) , .q(spu_madp_exp_e_data_q[63:0]), .en (~(~spu_maexp_e_data_wen)), .clk(rclk), .se(1'b0),.si (),.so () ); `else dff_s #(64) exp_e_data_ff ( .din(spu_madp_exp_e_data[63:0]) , .q(spu_madp_exp_e_data_q[63:0]), .clk (exp_e_data_clk), .se(1'b0),.si (),.so () ); `endif assign spu_madp_e_eq_one = spu_madp_exp_e_data_q[63]; // ############################################################ // --------------------------------------------------------- // ------------ MA PARITY DATAPATH ---------------- // --------------------------------------------------------- // --------------------------------------------------------- wire [63:0] mem_ldupper_data_mx_l; wire mulorred_data_clk; `ifdef FPGA_SYN_CLK_EN `else clken_buf mulorred_data_lcd ( .clk(mulorred_data_clk), .rclk(rclk), .enb_l(~spu_mactl_madp_parflop_wen), .tmb_l(testmode_l)); `endif `ifdef FPGA_SYN_CLK_DFF dffe_s #(64) mulorred_data_ff ( .din(mulorred_data[63:0]) , .q(mulorred_data_q[63:0]), .en (~(~spu_mactl_madp_parflop_wen)), .clk(rclk), .se(1'b0),.si (),.so () ); `else dff_s #(64) mulorred_data_ff ( .din(mulorred_data[63:0]) , .q(mulorred_data_q[63:0]), .clk (mulorred_data_clk), .se(1'b0),.si (),.so () ); `endif dp_mux2es #(64) mul_ldlower_mx ( .in0 (mulorred_data_q[63:0]), .in1 (spu_madp_lnlower_data[63:0]), .sel (spu_madp_ldop_q_buf1), .dout (mul_ldlower_data_mx[63:0])); wire [63:0] mul_ldlower_data_mx_l; assign mul_ldlower_data_mx_l = ~mul_ldlower_data_mx; //to match gatemap. // USE THE LIBRARY MACRO FOR THE FOLLOWING PARITY GENERATORS. assign mul_ldlower_data_par_pre[1] = (^mul_ldlower_data_mx_l[63:32]); //to match gatemap. assign mul_ldlower_data_par_pre[0] = (^mul_ldlower_data_mx_l[31:0]); //to match gatemap. assign mul_ldlower_data_par[1] = mul_ldlower_data_par_pre[1] ^ spu_mactl_force_perr; assign mul_ldlower_data_par[0] = mul_ldlower_data_par_pre[0] ^ spu_mactl_force_perr; wire [65:0] spu_madp_odddata_mx_l; dp_mux3ds #(66) odd_data_mx ( .in0 ({mul_ldlower_data_par[1:0],mul_ldlower_data_mx_l[63:0]}), .in1 ({mem_ldupper_data_par[1:0],mem_ldupper_data_mx_l[63:0]}), .in2 ({mul_ldlower_data_par[1:0],mul_ldlower_data_mx_l[63:0]}), .sel0_l (spu_mactl_memmxsel_l[0]), .sel1_l (spu_mactl_memmxsel_l[1]), .sel2_l (spu_mactl_memmxsel_l[2]), .dout (spu_madp_odddata_mx_l[65:0])); assign spu_madp_odddata_mx = ~spu_madp_odddata_mx_l; //to match gatemap. wire [65:0] spu_madp_odddata_mx_sehold; dp_mux2es #(66) odddata_mx_sehold ( .in0 (spu_madp_odddata_mx[65:0]), .in1 (spu_madp_odddata[65:0]), .sel (sehold), .dout (spu_madp_odddata_mx_sehold[65:0])); dff_s #(66) mul_ldlower_ff ( .din(spu_madp_odddata_mx_sehold[65:0]) , .q(spu_madp_odddata[65:0]), .clk (rclk), .se(1'b0),.si (),.so () ); // --------------------------------------------------------- dff_s #(64) mem_data_ff ( .din(spu_mamem_rd_data[63:0]) , .q(spu_madp_mem_rd_data[63:0]), .clk (rclk), .se(1'b0),.si (),.so () ); // --------------------------------------------------------- dp_mux2es #(64) mem_ldupper_mx ( .in0 (spu_madp_mem_rd_data[63:0]), .in1 (spu_madp_lnupper_data[63:0]), .sel (spu_madp_ldop_q_buf2), .dout (mem_ldupper_data_mx[63:0])); assign mem_ldupper_data_mx_l = ~mem_ldupper_data_mx; // USE THE LIBRARY MACRO FOR THE FOLLOWING PARITY GENERATORS. assign mem_ldupper_data_par_pre[1] = (^mem_ldupper_data_mx_l[63:32]); assign mem_ldupper_data_par_pre[0] = (^mem_ldupper_data_mx_l[31:0]); assign mem_ldupper_data_par[1] = mem_ldupper_data_par_pre[1] ^ spu_mactl_force_perr; assign mem_ldupper_data_par[0] = mem_ldupper_data_par_pre[0] ^ spu_mactl_force_perr; wire [65:0] spu_madp_evedata_mx_l; dp_mux3ds #(66) eve_data_mx ( .in0 ({mem_ldupper_data_par[1:0],mem_ldupper_data_mx_l[63:0]}), .in1 ({mul_ldlower_data_par[1:0],mul_ldlower_data_mx_l[63:0]}), .in2 ({mul_ldlower_data_par[1:0],mul_ldlower_data_mx_l[63:0]}), .sel0_l (spu_mactl_memmxsel_l[0]), .sel1_l (spu_mactl_memmxsel_l[1]), .sel2_l (spu_mactl_memmxsel_l[2]), .dout (spu_madp_evedata_mx_l[65:0])); assign spu_madp_evedata_mx = ~spu_madp_evedata_mx_l; wire [65:0] spu_madp_evedata_mx_sehold; dp_mux2es #(66) evedata_mx_sehold ( .in0 (spu_madp_evedata_mx[65:0]), .in1 (spu_madp_evedata[65:0]), .sel (sehold), .dout (spu_madp_evedata_mx_sehold[65:0])); dff_s #(66) mem_ldupper_ff ( .din(spu_madp_evedata_mx_sehold[65:0]) , .q(spu_madp_evedata[65:0]), .clk (rclk), .se(1'b0),.si (),.so () ); // --------------------------------------------------------- // following is for readmem parity check only performed in spu_mactl.v assign spu_madp_rdmem_pargen[1:0] = mem_ldupper_data_par_pre[1:0]; // --------------------------------------------------------- // --------------------------------------------------------- // ############################################################ // --------------------------------------------------------- // --------------------------------------------------------- // ------- MA ASI REGISTERS wire mampa_reg_clk; `ifdef FPGA_SYN_CLK_EN `else clken_buf mampa_reg_lcd ( .clk(mampa_reg_clk), .rclk(rclk), .enb_l(~spu_mactl_mpa_wen), .tmb_l(testmode_l)); `endif `ifdef FPGA_SYN_CLK_DFF dffe_s #(36) mampa_reg_ff ( .din(exu_spu_st_rs3_data_g2[38:3]) , .q(spu_madp_mpa_reg[38:3]), .en (~(~spu_mactl_mpa_wen)), .clk(rclk), .se(1'b0),.si(),.so() ); `else dff_s #(36) mampa_reg_ff ( .din(exu_spu_st_rs3_data_g2[38:3]) , .q(spu_madp_mpa_reg[38:3]), .clk (mampa_reg_clk), .se(1'b0),.si(),.so() ); `endif wire maaddr_reg_clk; `ifdef FPGA_SYN_CLK_EN `else clken_buf maaddr_reg_lcd ( .clk(maaddr_reg_clk), .rclk(rclk), .enb_l(~spu_mactl_maaddr_wen), .tmb_l(testmode_l)); `endif `ifdef FPGA_SYN_CLK_DFF dffe_s #(48) maaddr_reg_ff ( .din(exu_spu_st_rs3_data_g2[47:0]) , .q(spu_madp_maaddr_reg_int[47:0]), .en (~(~spu_mactl_maaddr_wen)), .clk(rclk), .se(1'b0),.si (),.so () ); `else dff_s #(48) maaddr_reg_ff ( .din(exu_spu_st_rs3_data_g2[47:0]) , .q(spu_madp_maaddr_reg_int[47:0]), .clk (maaddr_reg_clk), .se(1'b0),.si (),.so () ); `endif assign spu_madp_maaddr_reg[47:0] = spu_madp_maaddr_reg_int[47:0]; wire manp_reg_clk; `ifdef FPGA_SYN_CLK_EN `else clken_buf manp_reg_lcd ( .clk(manp_reg_clk), .rclk(rclk), .enb_l(~spu_mactl_manp_wen), .tmb_l(testmode_l)); `endif `ifdef FPGA_SYN_CLK_DFF dffe_s #(64) manp_reg_ff ( .din(exu_spu_st_rs3_data_g2[63:0]) , .q(spu_madp_manp_reg[63:0]), .en (~(~spu_mactl_manp_wen)), .clk(rclk), .se(1'b0),.si (),.so () ); `else dff_s #(64) manp_reg_ff ( .din(exu_spu_st_rs3_data_g2[63:0]) , .q(spu_madp_manp_reg[63:0]), .clk (manp_reg_clk), .se(1'b0),.si (),.so () ); `endif wire [63:0] spu_madp_ldxa_data_a; dp_mux4ds #(64) ldxa_data_a_mx ( .in0 ({24'h000000,1'b0,spu_madp_mpa_reg[38:3],3'b000}), .in1 ({16'h0000,spu_madp_maaddr_reg_int[47:0]}), .in2 (spu_madp_manp_reg[63:0]), .in3 ({50'b00000000000000000000000000000000000000000000000000,spu_mactl_mactl_reg[13:0]}), .sel0_l (spu_mactl_ldxa_data_w_sel_l[0]), .sel1_l (spu_mactl_ldxa_data_w_sel_l[1]), .sel2_l (spu_mactl_ldxa_data_w_sel_l[2]), .sel3_l (spu_mactl_ldxa_data_w_sel_l[3]), .dout (spu_madp_ldxa_data_a[63:0])); dp_mux2es #(64) ldxa_data_mx ( .in0 (spu_madp_ldxa_data_a[63:0]), .in1 (64'h0000000000000000), .sel (spu_mactl_ldxa_data_w_select), .dout (spu_madp_ldxa_data[63:0])); // ############################################################ // ------------------------------------------------------------ // load buffer. // ------------------------------------------------------------ // ------------------------------------------------------------ wire lnupper_data_clk; `ifdef FPGA_SYN_CLK_EN `else clken_buf lnupper_data_lcd ( .clk(lnupper_data_clk), .rclk(rclk), .enb_l(~spu_wen_maln_wen), .tmb_l(testmode_l)); `endif `ifdef FPGA_SYN_CLK_DFF dffe_s #(64) lnupper_data_ff ( .din(lsu_spu_vload_data[127:64]) , .q(spu_madp_lnupper_data[63:0]), .en (~(~spu_wen_maln_wen)), .clk(rclk), .se(1'b0),.si (),.so () ); `else dff_s #(64) lnupper_data_ff ( .din(lsu_spu_vload_data[127:64]) , .q(spu_madp_lnupper_data[63:0]), .clk (lnupper_data_clk), .se(1'b0),.si (),.so () ); `endif wire lnlower_data_clk; `ifdef FPGA_SYN_CLK_EN `else clken_buf lnlower_data_lcd ( .clk(lnlower_data_clk), .rclk(rclk), .enb_l(~spu_wen_maln_wen), .tmb_l(testmode_l)); `endif `ifdef FPGA_SYN_CLK_DFF dffe_s #(64) lnlower_data_ff ( .din(lsu_spu_vload_data[63:0]) , .q(spu_madp_lnlower_data[63:0]), .en (~(~spu_wen_maln_wen)), .clk(rclk), .se(1'b0),.si (),.so () ); `else dff_s #(64) lnlower_data_ff ( .din(lsu_spu_vload_data[63:0]) , .q(spu_madp_lnlower_data[63:0]), .clk (lnlower_data_clk), .se(1'b0),.si (),.so () ); `endif // ############################################################ endmodule
Go to most recent revision | Compare with Previous | Blame | View Log