URL
https://opencores.org/ocsvn/sparc64soc/sparc64soc/trunk
Subversion Repositories sparc64soc
[/] [sparc64soc/] [trunk/] [T1-FPU/] [fpu_in_ctl.v] - Rev 8
Go to most recent revision | Compare with Previous | Blame | View Log
// ========== Copyright Header Begin ========================================== // // OpenSPARC T1 Processor File: fpu_in_ctl.v // Copyright (c) 2006 Sun Microsystems, Inc. All Rights Reserved. // DO NOT ALTER OR REMOVE COPYRIGHT NOTICES. // // The above named program is free software; you can redistribute it and/or // modify it under the terms of the GNU General Public // License version 2 as published by the Free Software Foundation. // // The above named program is distributed in the hope that it will be // useful, but WITHOUT ANY WARRANTY; without even the implied warranty of // MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU // General Public License for more details. // // You should have received a copy of the GNU General Public // License along with this work; if not, write to the Free Software // Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301, USA. // // ========== Copyright Header End ============================================ /////////////////////////////////////////////////////////////////////////////// // // FPU input control logic. // /////////////////////////////////////////////////////////////////////////////// module fpu_in_ctl ( pcx_fpio_data_rdy_px2, pcx_fpio_data_px2, fp_op_in, fp_op_in_7in, a1stg_step, m1stg_step, d1stg_step, add_pipe_active, mul_pipe_active, div_pipe_active, sehold, arst_l, grst_l, rclk, fp_data_rdy, fadd_clken_l, fmul_clken_l, fdiv_clken_l, inq_we, inq_wraddr, inq_read_en, inq_rdaddr, inq_bp, inq_bp_inv, inq_fwrd, inq_fwrd_inv, inq_add, inq_mul, inq_div, se, si, so ); input pcx_fpio_data_rdy_px2; // FPU request ready from PCX input [123:118] pcx_fpio_data_px2; // FPU request data from PCX input [3:2] fp_op_in; // request opcode input fp_op_in_7in; // request opcode input a1stg_step; // add pipe load input m1stg_step; // multiply pipe load input d1stg_step; // divide pipe load input add_pipe_active; // add pipe is executing a valid instr input mul_pipe_active; // mul pipe is executing a valid instr input div_pipe_active; // div pipe is executing a valid instr input sehold; // hold sram output MUX (for inq_data[155:0] in fpu_in_dp) for macrotest input arst_l; // global asynchronous reset- asserted low input grst_l; // global synchronous reset- asserted low input rclk; // global clock output fp_data_rdy; output fadd_clken_l; // add pipe clk enable - asserted low output fmul_clken_l; // multiply pipe clk enable - asserted low output fdiv_clken_l; // divide pipe clk enable - asserted low output inq_we; // input Q write enable output [3:0] inq_wraddr; // input Q write address output inq_read_en; // input Q read enable output [3:0] inq_rdaddr; // input Q read address output inq_bp; // bypass the input Q SRAM output inq_bp_inv; // don't bypass the input Q SRAM output inq_fwrd; // input Q is empty output inq_fwrd_inv; // input Q is not empty output inq_add; // add pipe request output inq_mul; // multiply pipe request output inq_div; // divide pipe request input se; // scan_enable input si; // scan in output so; // scan out wire reset; wire fp_data_rdy; wire fp_vld_in; wire [4:0] fp_type_in; wire fadd_clken_l; wire fmul_clken_l; wire fdiv_clken_l; wire fp_op_in_7; wire fp_op_in_7_inv; wire inq_we; wire inq_read_en; wire [3:0] inq_wrptr_plus1; wire inq_wrptr_step; wire [3:0] inq_wrptr; wire [3:0] inq_div_wrptr_plus1; wire inq_div_wrptr_step; wire [3:0] inq_div_wrptr; wire [3:0] inq_wraddr; wire [3:0] inq_wraddr_del; wire inq_re; wire [3:0] inq_rdptr_plus1; wire [3:0] inq_rdptr_in; wire [3:0] inq_rdptr; wire inq_div_re; wire [3:0] inq_div_rdptr_plus1; wire [3:0] inq_div_rdptr_in; wire [3:0] inq_div_rdptr; wire inq_div_rd_in; wire inq_div_rd; wire [3:0] inq_rdaddr; wire [3:0] inq_rdaddr_del; wire inq_bp; wire inq_bp_inv; wire inq_empty; wire inq_div_empty; wire inq_fwrd; wire inq_fwrd_inv; wire fp_add_in; wire fp_mul_in; wire fp_div_in; wire [7:0] inq_rdptr_dec_in; wire [7:0] inq_rdptr_dec; wire [7:0] inq_div_rdptr_dec_in; wire [7:0] inq_div_rdptr_dec; wire [15:0] inq_rdaddr_del_dec_in; wire [15:0] inq_rdaddr_del_dec; wire inq_pipe0_we; wire inq_pipe1_we; wire inq_pipe2_we; wire inq_pipe3_we; wire inq_pipe4_we; wire inq_pipe5_we; wire inq_pipe6_we; wire inq_pipe7_we; wire inq_pipe8_we; wire inq_pipe9_we; wire inq_pipe10_we; wire inq_pipe11_we; wire inq_pipe12_we; wire inq_pipe13_we; wire inq_pipe14_we; wire inq_pipe15_we; wire [2:0] inq_pipe0; wire [2:0] inq_pipe1; wire [2:0] inq_pipe2; wire [2:0] inq_pipe3; wire [2:0] inq_pipe4; wire [2:0] inq_pipe5; wire [2:0] inq_pipe6; wire [2:0] inq_pipe7; wire [2:0] inq_pipe8; wire [2:0] inq_pipe9; wire [2:0] inq_pipe10; wire [2:0] inq_pipe11; wire [2:0] inq_pipe12; wire [2:0] inq_pipe13; wire [2:0] inq_pipe14; wire [2:0] inq_pipe15; wire [2:0] inq_pipe; wire inq_div; wire inq_diva; wire inq_diva_dly; wire d1stg_step_dly; wire inq_mul; wire inq_mula; wire inq_add; wire inq_adda; wire valid_packet; wire valid_packet_dly; wire tag_sel; wire sehold_inv; dffrl_async #(1) dffrl_in_ctl ( .din (grst_l), .clk (rclk), .rst_l(arst_l), .q (in_ctl_rst_l), .se (se), .si (), .so () ); assign reset= (!in_ctl_rst_l); /////////////////////////////////////////////////////////////////////////////// // // Capture request and input control information. // /////////////////////////////////////////////////////////////////////////////// dffr_s #(1) i_fp_data_rdy ( .din (pcx_fpio_data_rdy_px2), .rst (reset), .clk (rclk), .q (fp_data_rdy), .se (se), .si (), .so () ); dff_s #(1) i_fp_vld_in ( .din (pcx_fpio_data_px2[123]), .clk (rclk), .q (fp_vld_in), .se (se), .si (), .so () ); dff_s #(5) i_fp_type_in ( .din (pcx_fpio_data_px2[122:118]), .clk (rclk), .q (fp_type_in[4:0]), .se (se), .si (), .so () ); /////////////////////////////////////////////////////////////////////////////// // // Select lines- extract the two operands. // /////////////////////////////////////////////////////////////////////////////// assign fp_op_in_7= fp_op_in_7in; assign fp_op_in_7_inv= (!fp_op_in_7); /////////////////////////////////////////////////////////////////////////////// // // Input queue control logic // - write enables // - write pointers // - read enables // - read pointers // - write address // - read address // /////////////////////////////////////////////////////////////////////////////// assign inq_we= fp_data_rdy && fp_vld_in && (((fp_type_in[4:0]==5'h0a) && fp_op_in_7) || ((fp_type_in[4:0]==5'h0b) && fp_op_in_7_inv)); assign inq_wrptr_plus1[3:0]= inq_wrptr[3:0] + 4'h1; assign inq_wrptr_step= inq_we && (!fp_div_in); dffre_s #(4) i_inq_wrptr ( .din (inq_wrptr_plus1[3:0]), .en (inq_wrptr_step), .rst (reset), .clk (rclk), .q (inq_wrptr[3:0]), .se (se), .si (), .so () ); assign inq_div_wrptr_plus1[3:0]= inq_div_wrptr[3:0] + 4'h1; assign inq_div_wrptr_step= inq_we && fp_div_in; dffre_s #(4) i_inq_div_wrptr ( .din (inq_div_wrptr_plus1[3:0]), .en (inq_div_wrptr_step), .rst (reset), .clk (rclk), .q (inq_div_wrptr[3:0]), .se (se), .si (), .so () ); assign inq_wraddr[3:0]= {fp_div_in, (({3{fp_div_in}} & inq_div_wrptr[2:0]) | ({3{(!fp_div_in)}} & inq_wrptr[2:0]))}; dff_s #(4) i_inq_wraddr_del ( .din (inq_wraddr[3:0]), .clk (rclk), .q (inq_wraddr_del[3:0]), .se (se), .si (), .so () ); assign inq_read_en = ~inq_empty | ~inq_div_empty; assign inq_re= (inq_adda && a1stg_step) || (inq_mula && m1stg_step); assign inq_rdptr_plus1[3:0]= inq_rdptr[3:0] + 4'h1; assign inq_rdptr_in[3:0]= ({4{(inq_re && (!reset))}} & inq_rdptr_plus1[3:0]) | ({4{((!inq_re) && (!reset))}} & inq_rdptr[3:0]); dff_s #(4) i_inq_rdptr ( .din (inq_rdptr_in[3:0]), .clk (rclk), .q (inq_rdptr[3:0]), .se (se), .si (), .so () ); assign inq_div_re= (inq_diva && d1stg_step); assign inq_div_rdptr_plus1[3:0]= inq_div_rdptr[3:0] + 4'h1; assign inq_div_rdptr_in[3:0]= ({4{(inq_div_re && (!reset))}} & inq_div_rdptr_plus1[3:0]) | ({4{((!inq_div_re) && (!reset))}} & inq_div_rdptr[3:0]); dff_s #(4) i_inq_div_rdptr ( .din (inq_div_rdptr_in[3:0]), .clk (rclk), .q (inq_div_rdptr[3:0]), .se (se), .si (), .so () ); assign inq_div_rd_in= (!inq_div_empty) && d1stg_step && (!inq_diva); dff_s #(1) i_inq_div_rd ( .din (inq_div_rd_in), .clk (rclk), .q (inq_div_rd), .se (se), .si (), .so () ); assign inq_rdaddr[3:0]= {inq_div_rd_in, (({3{inq_div_rd_in}} & (inq_div_rdptr[2:0] & {3{(!reset)}})) | ({3{(!inq_div_rd_in)}} & inq_rdptr_in[2:0]))}; dff_s #(4) i_inq_rdaddr_del ( .din (inq_rdaddr[3:0]), .clk (rclk), .q (inq_rdaddr_del[3:0]), .se (se), .si (), .so () ); /////////////////////////////////////////////////////////////////////////////// // // Input queue empty and bypass signals. // /////////////////////////////////////////////////////////////////////////////// // Power management update assign valid_packet = fp_data_rdy && fp_vld_in && ((fp_type_in[4:0]==5'h0a) || (fp_type_in[4:0]==5'h0b)); dffre_s #(1) i_valid_packet_dly ( .din (valid_packet), .en (1'b1), .rst (reset), .clk (rclk), .q (valid_packet_dly), .se (se), .si (), .so () ); // Never bypass/forward invalid packets to the execution pipes // assign inq_bp= (inq_wraddr_del[3:0]==inq_rdaddr_del[3:0]); // 11/11/03: macrotest (AND with sehold_inv) assign sehold_inv = ~sehold; assign inq_bp= (inq_wraddr_del[3:0]==inq_rdaddr_del[3:0]) && valid_packet_dly && sehold_inv; assign inq_bp_inv= (!inq_bp); assign inq_empty= (inq_wrptr[3:0]==inq_rdptr[3:0]); assign inq_div_empty= (inq_div_wrptr[3:0]==inq_div_rdptr[3:0]); // Power management update // Never bypass/forward invalid packets to the execution pipes // assign inq_fwrd= (inq_empty && (!inq_div_rd)) // || (inq_div_empty && fp_div_in && fp_data_rdy && fp_vld_in // && d1stg_step); // 11/11/03: macrotest change (AND with sehold_inv) assign inq_fwrd= ((inq_empty && (!inq_div_rd)) || (inq_div_empty && fp_div_in && d1stg_step)) && valid_packet && sehold_inv; assign inq_fwrd_inv= (!inq_fwrd); /////////////////////////////////////////////////////////////////////////////// // // FPU pipe selection flags. // /////////////////////////////////////////////////////////////////////////////// assign fp_add_in= fp_data_rdy && fp_vld_in && (fp_type_in[4:1]==4'h5) && ((fp_op_in_7 && (!fp_type_in[0])) || (fp_op_in_7_inv && (!fp_op_in[3]) && fp_type_in[0])); assign fp_mul_in= fp_data_rdy && fp_vld_in && (fp_type_in[4:0]==5'h0b) && fp_op_in_7_inv && (fp_op_in[3:2]==2'b10); assign fp_div_in= fp_data_rdy && fp_vld_in && (fp_type_in[4:0]==5'h0b) && fp_op_in_7_inv && (fp_op_in[3:2]==2'b11); assign inq_rdptr_dec_in[7:0]= ({8{reset}} & 8'h01) | ({8{(inq_re && (!reset))}} & {inq_rdptr_dec[6:0], inq_rdptr_dec[7]}) | ({8{((!inq_re) && (!reset))}} & inq_rdptr_dec[7:0]); dff_s #(8) i_inq_rdptr_dec ( .din (inq_rdptr_dec_in[7:0]), .clk (rclk), .q (inq_rdptr_dec[7:0]), .se (se), .si (), .so () ); assign inq_div_rdptr_dec_in[7:0]= ({8{reset}} & 8'h01) | ({8{(inq_div_re && (!reset))}} & {inq_div_rdptr_dec[6:0], inq_div_rdptr_dec[7]}) | ({8{((!inq_div_re) && (!reset))}} & inq_div_rdptr_dec[7:0]); dff_s #(8) i_inq_div_rdptr_dec ( .din (inq_div_rdptr_dec_in[7:0]), .clk (rclk), .q (inq_div_rdptr_dec[7:0]), .se (se), .si (), .so () ); assign inq_rdaddr_del_dec_in[15:0]= ({16{((!inq_div_empty) && d1stg_step && (!inq_diva))}} & {(inq_div_rdptr_dec[7:1] & {7{(!reset)}}), (inq_div_rdptr_dec[0] || reset), 8'b0}) | ({16{(!((!inq_div_empty) && d1stg_step && (!inq_diva)))}} & {8'b0, inq_rdptr_dec_in[7:0]}); dff_s #16 i_inq_rdaddr_del_dec ( .din (inq_rdaddr_del_dec_in[15:0]), .clk (rclk), .q (inq_rdaddr_del_dec[15:0]), .se (se), .si (), .so () ); assign inq_pipe0_we= inq_we && (!fp_div_in) && (inq_wrptr[2:0]==3'h0); assign inq_pipe1_we= inq_we && (!fp_div_in) && (inq_wrptr[2:0]==3'h1); assign inq_pipe2_we= inq_we && (!fp_div_in) && (inq_wrptr[2:0]==3'h2); assign inq_pipe3_we= inq_we && (!fp_div_in) && (inq_wrptr[2:0]==3'h3); assign inq_pipe4_we= inq_we && (!fp_div_in) && (inq_wrptr[2:0]==3'h4); assign inq_pipe5_we= inq_we && (!fp_div_in) && (inq_wrptr[2:0]==3'h5); assign inq_pipe6_we= inq_we && (!fp_div_in) && (inq_wrptr[2:0]==3'h6); assign inq_pipe7_we= inq_we && (!fp_div_in) && (inq_wrptr[2:0]==3'h7); assign inq_pipe8_we= inq_we && fp_div_in && (inq_div_wrptr[2:0]==3'h0); assign inq_pipe9_we= inq_we && fp_div_in && (inq_div_wrptr[2:0]==3'h1); assign inq_pipe10_we= inq_we && fp_div_in && (inq_div_wrptr[2:0]==3'h2); assign inq_pipe11_we= inq_we && fp_div_in && (inq_div_wrptr[2:0]==3'h3); assign inq_pipe12_we= inq_we && fp_div_in && (inq_div_wrptr[2:0]==3'h4); assign inq_pipe13_we= inq_we && fp_div_in && (inq_div_wrptr[2:0]==3'h5); assign inq_pipe14_we= inq_we && fp_div_in && (inq_div_wrptr[2:0]==3'h6); assign inq_pipe15_we= inq_we && fp_div_in && (inq_div_wrptr[2:0]==3'h7); dffre_s #(3) i_inq_pipe0 ( .din ({fp_div_in, fp_mul_in, fp_add_in}), .en (inq_pipe0_we), .rst (reset), .clk (rclk), .q (inq_pipe0[2:0]), .se (se), .si (), .so () ); dffre_s #(3) i_inq_pipe1 ( .din ({fp_div_in, fp_mul_in, fp_add_in}), .en (inq_pipe1_we), .rst (reset), .clk (rclk), .q (inq_pipe1[2:0]), .se (se), .si (), .so () ); dffre_s #(3) i_inq_pipe2 ( .din ({fp_div_in, fp_mul_in, fp_add_in}), .en (inq_pipe2_we), .rst (reset), .clk (rclk), .q (inq_pipe2[2:0]), .se (se), .si (), .so () ); dffre_s #(3) i_inq_pipe3 ( .din ({fp_div_in, fp_mul_in, fp_add_in}), .en (inq_pipe3_we), .rst (reset), .clk (rclk), .q (inq_pipe3[2:0]), .se (se), .si (), .so () ); dffre_s #(3) i_inq_pipe4 ( .din ({fp_div_in, fp_mul_in, fp_add_in}), .en (inq_pipe4_we), .rst (reset), .clk (rclk), .q (inq_pipe4[2:0]), .se (se), .si (), .so () ); dffre_s #(3) i_inq_pipe5 ( .din ({fp_div_in, fp_mul_in, fp_add_in}), .en (inq_pipe5_we), .rst (reset), .clk (rclk), .q (inq_pipe5[2:0]), .se (se), .si (), .so () ); dffre_s #(3) i_inq_pipe6 ( .din ({fp_div_in, fp_mul_in, fp_add_in}), .en (inq_pipe6_we), .rst (reset), .clk (rclk), .q (inq_pipe6[2:0]), .se (se), .si (), .so () ); dffre_s #(3) i_inq_pipe7 ( .din ({fp_div_in, fp_mul_in, fp_add_in}), .en (inq_pipe7_we), .rst (reset), .clk (rclk), .q (inq_pipe7[2:0]), .se (se), .si (), .so () ); dffre_s #(3) i_inq_pipe8 ( .din ({fp_div_in, fp_mul_in, fp_add_in}), .en (inq_pipe8_we), .rst (reset), .clk (rclk), .q (inq_pipe8[2:0]), .se (se), .si (), .so () ); dffre_s #(3) i_inq_pipe9 ( .din ({fp_div_in, fp_mul_in, fp_add_in}), .en (inq_pipe9_we), .rst (reset), .clk (rclk), .q (inq_pipe9[2:0]), .se (se), .si (), .so () ); dffre_s #(3) i_inq_pipe10 ( .din ({fp_div_in, fp_mul_in, fp_add_in}), .en (inq_pipe10_we), .rst (reset), .clk (rclk), .q (inq_pipe10[2:0]), .se (se), .si (), .so () ); dffre_s #(3) i_inq_pipe11 ( .din ({fp_div_in, fp_mul_in, fp_add_in}), .en (inq_pipe11_we), .rst (reset), .clk (rclk), .q (inq_pipe11[2:0]), .se (se), .si (), .so () ); dffre_s #(3) i_inq_pipe12 ( .din ({fp_div_in, fp_mul_in, fp_add_in}), .en (inq_pipe12_we), .rst (reset), .clk (rclk), .q (inq_pipe12[2:0]), .se (se), .si (), .so () ); dffre_s #(3) i_inq_pipe13 ( .din ({fp_div_in, fp_mul_in, fp_add_in}), .en (inq_pipe13_we), .rst (reset), .clk (rclk), .q (inq_pipe13[2:0]), .se (se), .si (), .so () ); dffre_s #(3) i_inq_pipe14 ( .din ({fp_div_in, fp_mul_in, fp_add_in}), .en (inq_pipe14_we), .rst (reset), .clk (rclk), .q (inq_pipe14[2:0]), .se (se), .si (), .so () ); dffre_s #(3) i_inq_pipe15 ( .din ({fp_div_in, fp_mul_in, fp_add_in}), .en (inq_pipe15_we), .rst (reset), .clk (rclk), .q (inq_pipe15[2:0]), .se (se), .si (), .so () ); // Power management update // 3-bit fifo pipe tags (div,mul,add) are not cleared after use. // Now that inq_fwrd is qualified by valid_packet, inq_fwrd can't be // used for inq_pipe[2:0] selection. assign tag_sel = (inq_empty && (!inq_div_rd)) || (inq_div_empty && fp_div_in && fp_data_rdy && fp_vld_in && d1stg_step); assign inq_pipe[2:0]= ({3{tag_sel}} // Austin update // performance change: allow div to bypass FIFO (2 cyc latency reduction) & {(inq_div_empty && fp_div_in && fp_data_rdy && fp_vld_in && d1stg_step && d1stg_step_dly && (!inq_diva_dly)), fp_mul_in, fp_add_in}) | ({3{(!tag_sel)}} & (({3{inq_rdaddr_del_dec[0]}} & inq_pipe0[2:0]) | ({3{inq_rdaddr_del_dec[1]}} & inq_pipe1[2:0]) | ({3{inq_rdaddr_del_dec[2]}} & inq_pipe2[2:0]) | ({3{inq_rdaddr_del_dec[3]}} & inq_pipe3[2:0]) | ({3{inq_rdaddr_del_dec[4]}} & inq_pipe4[2:0]) | ({3{inq_rdaddr_del_dec[5]}} & inq_pipe5[2:0]) | ({3{inq_rdaddr_del_dec[6]}} & inq_pipe6[2:0]) | ({3{inq_rdaddr_del_dec[7]}} & inq_pipe7[2:0]) | ({3{inq_rdaddr_del_dec[8]}} & inq_pipe8[2:0]) | ({3{inq_rdaddr_del_dec[9]}} & inq_pipe9[2:0]) | ({3{inq_rdaddr_del_dec[10]}} & inq_pipe10[2:0]) | ({3{inq_rdaddr_del_dec[11]}} & inq_pipe11[2:0]) | ({3{inq_rdaddr_del_dec[12]}} & inq_pipe12[2:0]) | ({3{inq_rdaddr_del_dec[13]}} & inq_pipe13[2:0]) | ({3{inq_rdaddr_del_dec[14]}} & inq_pipe14[2:0]) | ({3{inq_rdaddr_del_dec[15]}} & inq_pipe15[2:0]))); assign inq_div= inq_pipe[2]; assign inq_diva= inq_pipe[2]; assign inq_mul= inq_pipe[1]; assign inq_mula= inq_pipe[1]; assign inq_add= inq_pipe[0]; assign inq_adda= inq_pipe[0]; // Power management update // Gate the clocks on a per pipe basis (add, mul, div independently) // when a given pipe is not in use dffre_s #(1) i_inq_adda_dly ( .din (inq_adda), .en (1'b1), .rst (reset), .clk (rclk), .q (inq_adda_dly), .se (se), .si (), .so () ); dffre_s #(1) i_inq_mula_dly ( .din (inq_mula), .en (1'b1), .rst (reset), .clk (rclk), .q (inq_mula_dly), .se (se), .si (), .so () ); dffre_s #(1) i_inq_diva_dly ( .din (inq_diva), .en (1'b1), .rst (reset), .clk (rclk), .q (inq_diva_dly), .se (se), .si (), .so () ); dffre_s #(1) i_d1stg_step_dly ( .din (d1stg_step), .en (1'b1), .rst (reset), .clk (rclk), .q (d1stg_step_dly), .se (se), .si (), .so () ); assign fadd_clken_l = !(add_pipe_active || inq_adda || inq_adda_dly || reset); assign fmul_clken_l = !(mul_pipe_active || inq_mula || inq_mula_dly || reset); assign fdiv_clken_l = !(div_pipe_active || inq_diva || inq_diva_dly || reset); endmodule
Go to most recent revision | Compare with Previous | Blame | View Log