URL
https://opencores.org/ocsvn/sparc64soc/sparc64soc/trunk
Subversion Repositories sparc64soc
[/] [sparc64soc/] [trunk/] [os2wb/] [rst_ctrl.v] - Rev 5
Go to most recent revision | Compare with Previous | Blame | View Log
/* * Reset Controller * * (C) Copyleft 2007 Simply RISC LLP * AUTHOR: Fabrizio Fazzino <fabrizio.fazzino@srisc.com> * * LICENSE: * This is a Free Hardware Design; you can redistribute it and/or * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * The above named program is distributed in the hope that it will * be useful, but WITHOUT ANY WARRANTY; without even the implied * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. * See the GNU General Public License for more details. * * DESCRIPTION: * This block implements the Reset Controller used by the S1 Core * to wake up the SPARC Core of the OpenSPARC T1; its behavior was * reverse-engineered from the OpenSPARC waveforms. */ module rst_ctrl ( sys_clock_i, sys_reset_i, cluster_cken_o, gclk_o, cmp_grst_o, cmp_arst_o, ctu_tst_pre_grst_o, adbginit_o, gdbginit_o, sys_reset_final_o ); /* * Inputs */ // System inputs input sys_clock_i; // System Clock input sys_reset_i; // System Reset /* * Registered Outputs */ output gclk_o; /* * Registered Outputs */ // SPARC Core inputs output cluster_cken_o; output cmp_grst_o; output cmp_arst_o; output ctu_tst_pre_grst_o; output adbginit_o; output gdbginit_o; output sys_reset_final_o; /* * Registers */ // Counter used as a timer to strobe the reset signals reg [12:0] cycle_counter; /* * Procedural blocks */ // This process handles the timer counter reg rst_sync; reg sys_reset; always @(posedge sys_clock_i) begin rst_sync<=sys_reset_i; sys_reset<=rst_sync; if(sys_reset==1'b1) cycle_counter<=0; else if(cycle_counter[12]==1'b0) cycle_counter<=cycle_counter+1; end assign cmp_arst_o =!sys_reset; assign adbginit_o =!sys_reset; assign cluster_cken_o =cycle_counter<'d20 ? 0:1; assign ctu_tst_pre_grst_o=cycle_counter<'d60 ? 0:1; assign gdbginit_o =cycle_counter<'d120 ? 0:1; assign cmp_grst_o =cycle_counter<'d120 ? 0:1; assign sys_reset_final_o =cycle_counter<'d126 ? 1:0; assign gclk_o = sys_clock_i; endmodule
Go to most recent revision | Compare with Previous | Blame | View Log