Subversion Repositories spdif_interface

----------------------------------------------------------------------
----                                                              ----
---- WISHBONE SPDIF IP Core                                       ----
----                                                              ----
---- This file is part of the SPDIF project                       ----
---- http://www.opencores.org/cores/spdif_interface/              ----
----                                                              ----
---- Description                                                  ----
---- SPDIF transmitter signal encoder. Reads out samples from the ----
---- sample buffer, assembles frames and subframes and encodes    ----
---- serial data as bi-phase mark code.                           ----
----                                                              ----
---- To Do:                                                       ----
---- -                                                            ----
----                                                              ----
---- Author(s):                                                   ----
---- - Geir Drange, gedra@opencores.org                           ----
----                                                              ----
----------------------------------------------------------------------
----                                                              ----
---- Copyright (C) 2004 Authors and OPENCORES.ORG                 ----
----                                                              ----
---- This source file may be used and distributed without         ----
---- restriction provided that this copyright statement is not    ----
---- removed from the file and that any derivative work contains  ----
---- the original copyright notice and the associated disclaimer. ----
----                                                              ----
---- This source file is free software; you can redistribute it   ----
---- and/or modify it under the terms of the GNU Lesser General   ----
---- Public License as published by the Free Software Foundation; ----
---- either version 2.1 of the License, or (at your option) any   ----
---- later version.                                               ----
----                                                              ----
---- This source is distributed in the hope that it will be       ----
---- useful, but WITHOUT ANY WARRANTY; without even the implied   ----
---- warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR      ----
---- PURPOSE. See the GNU Lesser General Public License for more  ----
---- details.                                                     ----
----                                                              ----
---- You should have received a copy of the GNU Lesser General    ----
---- Public License along with this source; if not, download it   ----
---- from http://www.opencores.org/lgpl.shtml                     ----
----                                                              ----
----------------------------------------------------------------------
--
-- CVS Revision History
--
-- $Log: not supported by cvs2svn $
--
--
 
library ieee;
use ieee.std_logic_1164.all; 
use ieee.numeric_std.all;
 
entity tx_encoder is	 
  generic (DATA_WIDTH: integer range 16 to 32;
           ADDR_WIDTH: integer range 8 to 64); 
  port (
    wb_clk_i: in std_logic;             -- clock
    conf_mode: in std_logic_vector(3 downto 0);   -- sample format
    conf_ratio: in std_logic_vector(7 downto 0);  -- clock divider
    conf_udaten: in std_logic_vector(1 downto 0);  -- user data control
    conf_chsten: in std_logic_vector(1 downto 0);  -- ch. status control
    conf_txdata: in std_logic;          -- sample data enable
    conf_txen: in std_logic;            -- spdif signal enable
    user_data_a: in std_logic_vector(191 downto 0);  -- ch. a user data
    user_data_b: in std_logic_vector(191 downto 0);  -- ch. b user data
    ch_stat_a: in std_logic_vector(191 downto 0);  -- ch. a status
    ch_stat_b: in std_logic_vector(191 downto 0);  -- ch. b status
    chstat_freq: in std_logic_vector(1 downto 0);  -- sample freq.
    chstat_gstat: in std_logic;         -- generation status
    chstat_preem: in std_logic;         -- preemphasis status
    chstat_copy: in std_logic;          -- copyright bit
    chstat_audio: in  std_logic;        -- data format
    sample_data: in std_logic_vector(DATA_WIDTH - 1 downto 0);  -- audio data
    mem_rd: out std_logic;              -- sample buffer read
    sample_addr: out std_logic_vector(ADDR_WIDTH - 2 downto 0);  -- address
    evt_lcsbf: out std_logic;           -- lower ch.st./user data buf empty 
    evt_hcsbf: out std_logic;           -- higher ch.st/user data buf empty 
    evt_hsbf: out std_logic;            -- higher sample buf empty event
    evt_lsbf: out std_logic;            -- lower sample buf empty event
    spdif_tx_o: out std_logic);
end tx_encoder;
 
architecture rtl of tx_encoder is
 
  signal spdif_clk_en, spdif_out : std_logic;
  signal clk_cnt : integer range 0 to 511;
  type buf_states is (IDLE, READ_CHA, READ_CHB, CHA_RDY, CHB_RDY);
  signal bufctrl : buf_states;
  signal adr_cnt : integer range 0 to 2**(ADDR_WIDTH - 1) - 1;
  signal cha_samp_ack, chb_samp_ack : std_logic;
  type frame_states is (IDLE, BLOCK_START, CHANNEL_A, CHANNEL_B);
  signal framest : frame_states;
  signal frame_cnt : integer range 0 to 191;
  signal bit_cnt, par_cnt : integer range 0 to 31;
  signal inv_preamble, toggle, valid : std_logic;
  signal def_user_data, def_ch_status : std_logic_vector(191 downto 0);
  signal active_user_data, active_ch_status : std_logic_vector(191 downto 0);
  signal audio : std_logic_vector(23 downto 0);
  signal par_vector : std_logic_vector(26 downto 0);
  signal send_audio, imem_rd : std_logic;
 
  constant X_PREAMBLE : std_logic_vector(0 to 7) := "11100010";
  constant Y_PREAMBLE : std_logic_vector(0 to 7) := "11100100";
  constant Z_PREAMBLE : std_logic_vector(0 to 7) := "11101000";
 
  function encode_bit (
    signal bit_cnt    : integer;        -- sub-frame bit position
    signal valid : std_logic;           -- validity bit
    signal frame_cnt : integer;         -- frame counter
    signal par_cnt : integer;           -- parity counter
    signal user_data  : std_logic_vector(191 downto 0);
    signal ch_status  : std_logic_vector(191 downto 0);
    signal audio      : std_logic_vector(23 downto 0);
    signal toggle     : std_logic;
    signal prev_spdif : std_logic)      -- prev. value of spdif signal
    return std_logic is
    variable spdif, next_bit : std_logic;
  begin
    if bit_cnt > 3 and bit_cnt < 28 then  -- audio part
      next_bit := audio(bit_cnt - 4);
    elsif bit_cnt = 28 then           -- validity bit
      next_bit := valid;
    elsif bit_cnt = 29 then             -- user data
      next_bit := user_data(frame_cnt);
    elsif bit_cnt = 30 then
      next_bit := ch_status(frame_cnt);  -- channel status
    elsif bit_cnt = 31 then
      if par_cnt mod 2 = 1 then
        next_bit := '1';
      else
        next_bit := '0';
      end if;
    end if;
    -- bi-phase mark encoding:
    if next_bit = '0' then
      if toggle = '0' then
        spdif := not prev_spdif;
      else
        spdif := prev_spdif;
      end if;
    else
      spdif := not prev_spdif;
    end if;
    return(spdif);
  end encode_bit;
 
begin
 
-- SPDIF clock enable generation. The clock is a fraction of the Wishbone bus
-- clock, determined by the conf_ratio value.
  CGEN: process (wb_clk_i)
  begin 
    if rising_edge(wb_clk_i) then  
      if conf_txen = '0' then           -- transmitter disabled
        spdif_clk_en <= '0';
        clk_cnt <= 0;
      else                              -- transmitter enabled
        if clk_cnt < to_integer(unsigned(conf_ratio)) then  -- <= ?
          clk_cnt <= clk_cnt + 1;
          spdif_clk_en <= '0';
        else
          clk_cnt <= 0;
          spdif_clk_en <= '1';
        end if;
      end if;
    end if;
  end process CGEN;
 
-- Sample memory read process. Enabled by the conf_txdata bit.
-- Buffer address is reset when disabled. Also generates events for
-- lower and upper buffer empty conditions
  sample_addr <= std_logic_vector(to_unsigned(adr_cnt, ADDR_WIDTH - 1));
  mem_rd <= imem_rd;
 
  SRD: process (wb_clk_i)
  begin 
    if rising_edge(wb_clk_i) then
      if conf_txdata = '0' then
        bufctrl <= IDLE;
        imem_rd <= '0';
        adr_cnt <= 0;
        evt_lsbf <= '0';
        evt_hsbf <= '0';
      else
        case bufctrl is
          when IDLE =>
            adr_cnt <= 0;
            imem_rd <= '0';
            if conf_txdata = '1' then
              bufctrl <= READ_CHA;
              imem_rd <='1';
            end if;
          when READ_CHA =>
            imem_rd <= '0';
            adr_cnt <= (adr_cnt + 1) mod 2**(ADDR_WIDTH - 1);
            bufctrl <= CHA_RDY;
          when CHA_RDY =>
            if cha_samp_ack = '1' then
              imem_rd <= '1';
              bufctrl <= READ_CHB;
            end if;
          when READ_CHB =>
            imem_rd <= '0';
            adr_cnt <= (adr_cnt + 1) mod 2**(ADDR_WIDTH - 1);
            bufctrl <= CHB_RDY;
          when CHB_RDY =>
            if chb_samp_ack = '1' then
              imem_rd <= '1';
              bufctrl <= READ_CHA;
            end if;  
          when others =>
            bufctrl <= IDLE;
        end case;
        -- generate lower/upper buffer empty events
        if imem_rd = '1' then
          if adr_cnt = 2**(ADDR_WIDTH - 2) - 1 then
            evt_lsbf <= '1';
          else
            evt_lsbf <= '0';
          end if;
          if adr_cnt = 2**(ADDR_WIDTH - 1) - 1 then
            evt_hsbf <= '1';
          else
            evt_hsbf <= '0';
          end if;
        end if;
      end if;
    end if;
  end process SRD;
 
-- State machine that generates sub-frames and blocks
  spdif_tx_o <= spdif_out;
 
  FRST: process (wb_clk_i)
  begin 
    if rising_edge(wb_clk_i) then
      if conf_txen = '0' then
        framest <= IDLE;
        frame_cnt <= 0;
        bit_cnt <= 0;
        spdif_out <= '0';
        inv_preamble <= '0';
        toggle <= '0';
        valid <= '1';
        send_audio <= '0';
        cha_samp_ack <= '0';
        chb_samp_ack <= '0';
        evt_lcsbf <= '0';
        evt_hcsbf <= '0';
      else
        if spdif_clk_en = '1' then      -- SPDIF clock is twice the bit rate
          case framest is
            when IDLE =>
              bit_cnt <= 0;
              frame_cnt <= 0;
              inv_preamble <= '0';
              toggle <= '0';
              framest <= BLOCK_START;
            when BLOCK_START =>         -- Start of channels status block/Ch. A
              evt_lcsbf <= '0';
              evt_hcsbf <= '0';
              chb_samp_ack <= '0';
              toggle <= not toggle;     -- Each bit uses two clock enables,
              if toggle = '1' then      -- counted by the toggle bit.
                if bit_cnt < 31 then
                  bit_cnt <= bit_cnt + 1;
                else
                  bit_cnt <= 0;
                  if send_audio = '1' then
                    cha_samp_ack <= '1';
                  end if;
                  framest <= CHANNEL_B;
                end if;
              end if;
              -- Block start uses preamble Z.
              if bit_cnt < 4 then
                if toggle = '0' then
                  spdif_out <= Z_PREAMBLE(2 * bit_cnt) xor inv_preamble;
                else
                  spdif_out <= Z_PREAMBLE(2 * bit_cnt + 1) xor inv_preamble;
                end if;
                par_cnt <= 0;
              elsif bit_cnt > 3 and bit_cnt <= 31 then
                spdif_out <= encode_bit(bit_cnt, valid, frame_cnt,
                                        par_cnt, active_user_data,
                                        active_ch_status,
                                        audio, toggle, spdif_out);
                if bit_cnt = 31 then 
                  inv_preamble <= encode_bit(bit_cnt, valid, frame_cnt,
                                             par_cnt, active_user_data,
                                             active_ch_status,
                                             audio, toggle, spdif_out);
                end if;
                if toggle = '0' then
                  if bit_cnt > 3 and bit_cnt < 31 and
                    par_vector(bit_cnt - 4) = '1' then
                    par_cnt <= par_cnt + 1;  
                  end if;
                end if;
              end if;
            when CHANNEL_A =>           -- Sub-frame: channel A.
              evt_lcsbf <= '0';
              evt_hcsbf <= '0';
              chb_samp_ack <= '0';
              toggle <= not toggle;
              if toggle = '1' then
                if bit_cnt < 31 then
                  bit_cnt <= bit_cnt + 1;
                else
                  bit_cnt <= 0;
                  if spdif_out = '1' then
                    inv_preamble <= '1';
                  else
                    inv_preamble <= '0';
                  end if;
                  if send_audio = '1' then
                    cha_samp_ack <= '1';
                  end if;
                  framest <= CHANNEL_B;
                end if;
              end if;
              -- Channel A uses preable X.
              if bit_cnt < 4 then
                if toggle = '0' then
                  spdif_out <= X_PREAMBLE(2 * bit_cnt) xor inv_preamble;
                else
                  spdif_out <= X_PREAMBLE(2 * bit_cnt + 1) xor inv_preamble;
                end if;
                par_cnt <= 0;
              elsif bit_cnt > 3 and bit_cnt <= 31 then
                spdif_out <= encode_bit(bit_cnt, valid, frame_cnt,
                                        par_cnt, active_user_data,
                                        active_ch_status,
                                        audio, toggle, spdif_out);
                if bit_cnt = 31 then 
                  inv_preamble <= encode_bit(bit_cnt, valid, frame_cnt,
                                             par_cnt, active_user_data,
                                             active_ch_status,
                                             audio, toggle, spdif_out);
                end if;
                if toggle = '0' then
                  if bit_cnt > 3 and bit_cnt < 31 and
                    par_vector(bit_cnt - 4) = '1' then
                    par_cnt <= par_cnt + 1;  
                  end if;
                end if;
              end if;
            when CHANNEL_B =>           -- Sub-frame: channel B.
              cha_samp_ack <= '0';
              toggle <= not toggle;
              if toggle = '1' then
                if bit_cnt < 31 then
                  bit_cnt <= bit_cnt + 1;
                else
                  bit_cnt <= 0;
                  valid <= not conf_txdata;
                  if spdif_out = '1' then
                    inv_preamble <= '1';
                  else
                    inv_preamble <= '0';
                  end if;
                  send_audio <= conf_txdata;  -- 1 if audio samples sohuld be sent
                  if send_audio = '1' then
                    chb_samp_ack <= '1';
                  end if;
                  if frame_cnt < 191 then  -- One block is 192 frames
                    frame_cnt <= frame_cnt + 1;
                    if frame_cnt = 96 then
                      evt_lcsbf <= '1';
                    end if;
                    framest <= CHANNEL_A;
                  else
                    frame_cnt <= 0;
                    evt_hcsbf <= '1';
                    framest <= BLOCK_START;
                  end if;
                end if;
              end if;
              -- Channel B uses preable Y.
              if bit_cnt < 4 then
                if toggle = '0' then
                  spdif_out <= Y_PREAMBLE(2 * bit_cnt) xor inv_preamble;
                else
                  spdif_out <= Y_PREAMBLE(2 * bit_cnt + 1) xor inv_preamble;
                end if;
                par_cnt <= 0;
              elsif bit_cnt > 3 and bit_cnt <= 31 then
                spdif_out <= encode_bit(bit_cnt, valid, frame_cnt,
                                        par_cnt, active_user_data,
                                        active_ch_status,
                                        audio, toggle, spdif_out);
                if bit_cnt = 31 then 
                  inv_preamble <= encode_bit(bit_cnt, valid, frame_cnt,
                                             par_cnt, active_user_data,
                                             active_ch_status,
                                             audio, toggle, spdif_out);
                end if;
                if toggle = '0' then
                  if bit_cnt > 3 and bit_cnt < 31 and
                    par_vector(bit_cnt - 4) = '1' then
                    par_cnt <= par_cnt + 1;  
                  end if;
                end if;
              end if;
            when others =>
              framest <= IDLE;
          end case;
        end if;
      end if;
    end if;
  end process FRST;
 
-- Audio data latching
  DA32: if DATA_WIDTH = 32 generate
    ALAT: process (wb_clk_i)
    begin 
      if rising_edge(wb_clk_i) then
        if send_audio = '0' then
          audio(23 downto 0) <= (others => '0');
        else
          case to_integer(unsigned(conf_mode)) is
            when 0 =>                     -- 16 bit audio
              audio(23 downto 8) <= sample_data(15 downto 0);
              audio(7 downto 0) <= (others => '0');
            when 1 =>                     -- 17 bit audio
              audio(23 downto 7) <= sample_data(16 downto 0);
              audio(6 downto 0) <= (others => '0');
            when 2 =>                     -- 18 bit audio
              audio(23 downto 6) <= sample_data(17 downto 0);
              audio(5 downto 0) <= (others => '0');
            when 3 =>                     -- 19 bit audio
              audio(23 downto 5) <= sample_data(18 downto 0);
              audio(4 downto 0) <= (others => '0');
            when 4 =>                     -- 20 bit audio
              audio(23 downto 4) <= sample_data(19 downto 0);
              audio(3 downto 0) <= (others => '0');
            when 5 =>                   -- 21 bit audio
              audio(23 downto 3) <= sample_data(20 downto 0);
              audio(2 downto 0) <= (others => '0');
            when 6 =>                   -- 22 bit audio
              audio(23 downto 2) <= sample_data(21 downto 0);
              audio(1 downto 0) <= (others => '0');
            when 7 =>                   -- 23 bit audio
              audio(23 downto 1) <= sample_data(22 downto 0);
              audio(0) <= '0';
            when 8 =>                   -- 24 bit audio
              audio(23 downto 0) <= sample_data(23 downto 0);
            when others =>                -- unsupported modes
              audio(23 downto 0) <= (others => '0');
          end case;
        end if;
      end if;
    end process ALAT;
  end generate DA32;
 
  DA16: if DATA_WIDTH = 16 generate
    ALAT: process (wb_clk_i)
    begin 
      if rising_edge(wb_clk_i) then
        if send_audio = '0' then
          audio(23 downto 0) <= (others => '0');
        else
          audio(23 downto 8) <= sample_data(15 downto 0);
          audio(7 downto 0) <= (others => '0');
        end if;
      end if;
    end process ALAT;
  end generate DA16;
 
-- Parity vector. These bits are counted to generate even parity
  par_vector(23 downto 0) <= audio(23 downto 0);
  par_vector(24) <= valid;
  par_vector(25) <= active_user_data(frame_cnt);
  par_vector(26) <= active_ch_status(frame_cnt);
 
-- Channel status and user datat to be used if buffers are disabled.
-- User data is then all zero, while channel status bits are taken from
-- register TxChStat.
  def_user_data(191 downto 0) <= (others => '0');
  def_ch_status(0) <= '0';              -- consumer mode
  def_ch_status(1) <= chstat_audio;     -- audio bit
  def_ch_status(2) <= chstat_copy;      -- copy right
  def_ch_status(5 downto 3) <= "000" when chstat_preem = '0'
                           else "001";  -- pre-emphasis
  def_ch_status(7 downto 6) <= "00";
  def_ch_status(14 downto 8) <= (others => '0');
  def_ch_status(15) <= chstat_gstat;    -- generation status
  def_ch_status(23 downto 16) <= (others => '0');
  def_ch_status(27 downto 24) <= "0000" when chstat_freq = "00" else
                             "0010" when chstat_freq = "01" else
                             "0011" when chstat_freq = "10" else
                             "0001";
  def_ch_status(191 downto 28) <= (others => '0');
 
-- Generate channel status vector based on configuration register setting.
  active_ch_status <= ch_stat_a when conf_chsten = "01" else
                      ch_stat_a when conf_chsten = "10" and framest = CHANNEL_A else
                      ch_stat_b when conf_chsten = "10" and framest = CHANNEL_B else
                      def_ch_status;
 
-- Generate user data vector based on configuration register setting.
  active_user_data <= user_data_a when conf_udaten = "01" else
                      user_data_a when conf_udaten = "10" and framest = CHANNEL_A else
                      user_data_b when conf_udaten = "10" and framest = CHANNEL_B else
                      def_user_data;
 
end rtl;