URL
https://opencores.org/ocsvn/sxp/sxp/trunk
Subversion Repositories sxp
[/] [sxp/] [trunk/] [src/] [sxp.v] - Rev 59
Compare with Previous | Blame | View Log
////////////////////////////////////////////////////////////////////// //// //// //// SXP (Simple eXtensible Pipelined) Processor //// //// //// //// This file is part of the SXP opencores effort. //// //// <http://www.opencores.org/cores/sxp/> //// //// //// //// Module Description: //// //// SXP (Simple Extensible Pipeline) Core top level //// //// //// //// To Do: //// //// - Instruction level traps //// //// //// //// Author(s): //// //// - Sam Gladstone //// //// //// ////////////////////////////////////////////////////////////////////// //// //// //// Copyright (C) 2001 YOUR NAME HERE and OPENCORES.ORG //// //// //// //// This source file may be used and distributed without //// //// restriction provided that this copyright statement is not //// //// removed from the file and that any derivative work contains //// //// the original copyright notice and the associated disclaimer. //// //// //// //// This source file is free software; you can redistribute it //// //// and/or modify it under the terms of the GNU Lesser General //// //// Public License as published by the Free Software Foundation; //// //// either version 2.1 of the License, or (at your option) any //// //// later version. //// //// //// //// This source is distributed in the hope that it will be //// //// useful, but WITHOUT ANY WARRANTY; without even the implied //// //// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR //// //// PURPOSE. See the GNU Lesser General Public License for more //// //// details. //// //// //// //// You should have received a copy of the GNU Lesser General //// //// Public License along with this source; if not, download it //// //// from <http://www.opencores.org/lgpl.shtml> //// //// //// ////////////////////////////////////////////////////////////////////// // // $Id: sxp.v,v 1.10 2001-12-14 17:04:06 samg Exp $ // // CVS Revision History // // $Log: not supported by cvs2svn $ // Revision 1.9 2001/12/14 16:53:12 samg // simplified regf_status interface // // Revision 1.8 2001/12/12 02:07:25 samg // fixed case statement, sensitivity list // // Revision 1.7 2001/12/06 16:12:06 samg // minor expression rewrite in 4th stage // // Revision 1.6 2001/12/05 18:12:08 samg // Rewrote verilog for write enable signals for different destinations in the last stage. // The code is much easier to read and more liner to follow. // // Revision 1.5 2001/12/05 05:58:10 samg // fixed sensitivity list error in last pipeline stage // // Revision 1.4 2001/11/09 00:45:59 samg // integrated common rams into processor // // Revision 1.3 2001/11/06 20:15:28 samg // Used common header // // // Remove comments to force a syncronous FF bassed reg file. // `define SYNC_REG module sxp (clk, reset_b, mem_inst, // Instruction ram read data spqa, // scratch pad memory port A output (load data) ext_ra, // extension register a ext_rb, // extension register b ext_result, // extension bus result data ext_cvnz, // extension ALU flag result halt, // halts operation of processor int_req, // interupt request int_num, // interupt number for request int_rdy, // interupt controller ready for interupt int_srv_req, // signal that interupt is being serviced int_srv_num, // interupt number being serviced ext_alu_a, // reg A for ext ALU ext_alu_b, // reg B for ext ALU ext_inst, // copy of 32 bit instruction for extension architecture ext_inst_vld, // test ext architecture that instruction is valid ext_we, // extension bus write enable (dest) extr_addr, // ext bus address to read from (qra) extw_data, // data to write to extension bus (dest) extw_addr, // ext address to write to spl_addr, // scratch pad memory (Port A) load address (from reg file A) spw_addr, // scratch pad memory (Port B) write address (from ALU passthough) spw_we, // scretch pad memory (Port B) write enable (from wb source section) spw_data, // scratch pad memory (Port B) write data (from ALU passthrough) mem_pc); // Program Counter Address parameter RF_WIDTH = 4; parameter RF_SIZE = 16; input clk; input reset_b; input [31:0] mem_inst; input [31:0] spqa; input [31:0] ext_ra; input [31:0] ext_rb; input [31:0] ext_result; input [3:0] ext_cvnz; input halt; input int_req; input [15:0] int_num; output int_rdy; output int_srv_req; output [15:0] int_srv_num; output [31:0] ext_alu_a; output [31:0] ext_alu_b; output ext_we; reg ext_we; output [31:0] extr_addr; output [31:0] extw_data; output [31:0] extw_addr; output [31:0] spl_addr; output [31:0] spw_addr; output spw_we; reg spw_we; output [31:0] spw_data; output [31:0] mem_pc; output [31:0] ext_inst; output ext_inst_vld; // Scratch pad signal and regs reg [31:0] spl_addr_3; reg [31:0] spl_addr_3_wb; reg [31:0] spl_data_3_wb; reg spl_we_3_wb; reg [31:0] spl_data; // Internal Wires wire stall_1_2; // signal to stall pipelines 1 and 2 reg [31:0] wb_data; // write back registered data // Fetch interface wires reg set_pc; wire flush_pipeline; // signal to invalidate all pipelines wire stall_fetch; // stall for fetch module // Regf interface wires reg wec; // write enable for RF write to port C wire [31:0] qra; // regfile output for A wire [31:0] qrb; // regfile output for B // ALU interface wires wire [3:0] cvnz_a; // base ALU A flags wire [3:0] cvnz_b; // base ALU B flags wire [31:0] ya; // A result from ALU wire [31:0] yb; // B result from ALU // Pipeline #1 wires and regs wire stall_1; // stall 1st pipeline (fetch) wire [31:0] pcn_1; // Program Counter + 1 wire inst_vld_1; // instruction valid from pipeline 1 wire [31:0] inst_1; // 32 bit instruction from pipeline 1 wire [1:0] dest_cfg_1; // destination configuration from pipeline 1 wire [RF_WIDTH-1:0] dest_addr_1;// destination address for reg file writeback wire [2:0] src_cfg_1; // ALU source configuration from pipeline 1 wire [2:0] alu_cfg_1; // ALU configuration from pipeline 1 wire [3:0] wb_cfg_1; // write back source configuration from pipeline 1 wire [RF_WIDTH-1:0] addra_1; // address for reg file A from pipeline 1 wire [RF_WIDTH-1:0] addrb_1; // address for reg file B from pipeline 1 wire [RF_WIDTH-1:0] addrc_1; // address for reg file write C from pipeline 1 wire [15:0] imm_1; // immediate value from pipeline 1 reg dest_en_1; // destination register enable for scoreboarding reg a_en; // A reg is enable for reg file and scoreboarding reg b_en; // B reg is enable for reg file and scoreboarding wire cond_jump_1; // lsb of instruction is used for conditional reg jumps wire jz_1; // jump if zero instruction (false is jump if not zero) wire jal_1; // jump and link from pipeline 1 // Pipeline #2 (from memory latency) wires and regs wire stall_2; // stall 2nd pipeline reg inst_vld_2; // instruction valid signal from pipeline 2 reg [1:0] dest_cfg_2; // destination configuration from pipeline 2 reg [RF_WIDTH-1:0] dest_addr_2;// destination address for RF write from pipeline 2 reg [2:0] src_cfg_2; // ALU source configuration from pipeline 2 reg [2:0] alu_cfg_2; // ALU configuration from pipeline 2 reg [3:0] wb_cfg_2; // write back source configuration from pipeline 2 reg [15:0] imm_2; // immediate value from pipeline 2 reg [31:0] pcn_2; // next PC address from pipeline 2 reg [31:0] a_2; // Selected ALU A from pipeline 2 reg [31:0] b_2; // Selected ALU B from pipeline 2 reg cond_jump_2; // Conditional jump from pipeline 2 reg jz_2; // jump if zero instruction (false is jump if not zero) reg jal_2; // jump and link from pipeline 2 // Pipeline #3 (for ALU setup) wires and regs reg [31:0] r_qra; // load stall protection register wire stall_3; // stall 3rd pipeline reg inst_vld_3; // instruction valid signal from pipeline 3 reg [1:0] dest_cfg_3; // destination configuration from pipeline 3 reg [RF_WIDTH-1:0] dest_addr_3;// destination address for RF write from pipeline 3 reg [2:0] alu_cfg_3; // ALU configuration from pipeline 3 reg [3:0] wb_cfg_3; // write back source configuration from pipeline 3 reg [31:0] pcn_3; // next program counter value for pipeline 3 reg [31:0] a_3; // ALU input A from pipeline 3 reg [31:0] b_3; // ALU input B from pipeline 3 reg cond_jump_3; // Conditional jump from pipeline 3 reg jz_3; // jump if zero instruction (false is jump if not zero) reg jal_3; // jump and link from pipeline 3 // Pipeline #4 (WB and destination logic) wires and regs wire stall_4; // stall 4th pipeline reg inst_vld_4; // instruction valid signal from pipeline 4 reg [1:0] dest_cfg_4; // destination configuration from pipeline 4 reg [RF_WIDTH-1:0] dest_addr_4;// destination address for RF write from pipeline 4 reg [3:0] wb_cfg_4; // write back source configuration from pipeline 4 reg [31:0] spqa_4; // scratch pad output from pipeline 4 reg [31:0] ya_4; // used for scratch pad memory stores reg [31:0] yb_4; // used for scratch pad memory stores reg [31:0] ext_result_4; // ext ALU result from pipeline 4 reg [31:0] pcn_4; // next program counter value for pipeline 4 reg [3:0] ext_cvnz_4; // ext ALU flags from pipeline 4 reg [3:0] cvnz_a_4; // ALU a result from pipeline 4 reg [3:0] cvnz_b_4; // ALU b result from pipeline 4 wire [RF_WIDTH-1:0] addrc_wb; // connects dest_addr_4 to reg file write port C reg cond_jump_4; // Conditional jump from pipeline 4 reg jz_4; // jump if zero instruction (false is jump if not zero) reg jal_4; // jump and link from pipeline 4 wire [31:0] regc_data; // data to be written to port C (reg file) // stall signal handling assign stall_1 = stall_1_2 || halt; assign stall_2 = stall_1_2 || halt; assign stall_3 = halt; assign stall_4 = halt; // Interupt signals wire idle; wire jal_req; wire safe_switch; wire nop_detect; wire int_jal_req; // Processor Interupt controller int_cont i_int_cont( .clk(clk), // system clock .reset_b(reset_b), // system reset .halt(halt), // processor halt signal .int_req(int_req), // signal that an interupt is requested .int_num(int_num), // interupt number that is being requested .nop_detect(nop_detect), // signal that the processor just executed a NOP instruction .int_rdy(int_rdy), // 1 when int req will be serviced when requested .idle(idle), // signal to idle processor; .jal_req(jal_req), // signal to fetch to insert the JAL instruction .int_srv_req(int_srv_req), // signal that the interupt was serviced .int_srv_num(int_srv_num)); // interupt number that was serviced // Fetch Section fetch i_fetch ( .clk(clk), // system clock .reset_b(reset_b), // system reset .stall(stall_1), // stall for fetch .set_pc(set_pc), // signal to set the program counter .pc_init(wb_data), // value to set the program counter to .mem_inst(mem_inst), // instruction that was read from memory .idle(idle), // idle fetch process .jal_req(jal_req), // interupt jump and link request; .int_srv_num(int_srv_num), // interupt number for JAL .int_jal_req(int_jal_req), // interupt JAL signal request .mem_pc(mem_pc), // address to get from memory .pcn(pcn_1), // Next PC address .flush_pipeline(flush_pipeline), // Invalidate all pipelines (done during jumps) .inst_vld(inst_vld_1), // instruction valid flag .inst(inst_1)); // instruction to be sent to pipeline assign ext_inst = inst_1; assign ext_inst_vld = inst_vld_1; // Need to begin breaking out wire meaning for the next section assign dest_cfg_1 = inst_1[31:30]; assign src_cfg_1 = inst_1[29:27]; assign alu_cfg_1 = inst_1[26:24]; assign wb_cfg_1 = inst_1[23:20]; assign dest_addr_1 = inst_1[19:16]; assign addra_1 = (src_cfg_1 == 3'b001) ? dest_addr_1 : inst_1[15:12]; assign addrb_1 = inst_1[11:8]; assign imm_1 = inst_1[15:0]; assign cond_jump_1 = inst_1[0]; assign jz_1 = inst_1[1]; assign jal_1 = (!src_cfg_1[0] && !src_cfg_1[2]) ? inst_1[2] : int_jal_req; // This protects jal against imm and ext type sources // ----------------------- Reg File Section ------------------------ always @(src_cfg_1 or inst_vld_1 or dest_cfg_1) begin if (inst_vld_1) begin dest_en_1 = !dest_cfg_1; // Destination is register case (src_cfg_1) 3'b 000 : begin a_en = 1'b 1; b_en = 1'b 1; end 3'b 001 : begin a_en = 1'b 1; b_en = 1'b 0; end 3'b 010 : begin a_en = 1'b 0; b_en = 1'b 1; end 3'b 011 : begin a_en = 1'b 0; b_en = 1'b 0; end 3'b 100 : begin a_en = 1'b 1; b_en = 1'b 0; end 3'b 101 : begin a_en = 1'b 0; b_en = 1'b 1; end 3'b 110 : begin a_en = 1'b 0; b_en = 1'b 0; end 3'b 111 : begin a_en = 1'b 0; b_en = 1'b 0; end endcase end else begin a_en = 1'b 0; b_en = 1'b 0; dest_en_1 = 1'b 0; end end `ifdef SYNC_REG sync_regf #(4,32) i_regf ( .clk(clk), // system clock .reset_b(reset_b), // power on reset .halt(halt), // system wide halt .addra(addra_1), // Port A read address .a_en(a_en), // Port A read enable .addrb(addrb_1), // Port B read address .b_en(b_en), // Port B read enable .addrc(addrc_wb), // Port C write address .dc(regc_data), // Port C write data .wec(wec), // Port C write enable .qra(qra), // Port A registered output data .qrb(qrb)); // Port B registered output data `else mem_regf #(4,32) i_regf ( .clk(clk), // system clock .reset_b(reset_b), // power on reset .halt(halt), // system wide halt .addra(addra_1), // Port A read address .a_en(a_en), // Port A read enable .addrb(addrb_1), // Port B read address .b_en(b_en), // Port B read enable .addrc(addrc_wb), // Port C write address .dc(regc_data), // Port C write data .wec(wec), // Port C write enable .qra(qra), // Port A registered output data .qrb(qrb)); // Port B registered output data `endif regf_status #(4) i_regf_status( .clk(clk), // system clock .reset_b(reset_b), // power on reset .halt(halt), // system wide stall signal .dest_en(dest_en_1), // instr has dest register (en scoreboarding) .dest_addr(dest_addr_1), // destination address from instruction .wec(wec), // port C write back request .addrc(addrc_wb), // port C write back address .addra(addra_1), // reg file address reg A (source 1) .addrb(addrb_1), // reg file address reg B (source 2) .a_en(a_en), // Reg A is enabled in instruction .b_en(b_en), // Reg B is enabled in instruction .flush_pipeline(flush_pipeline),// Reinitialize status after pipeline flush .safe_switch(safe_switch), // safe to context switch or interupt; .conflict(stall_1_2)); // stall the reg file and modules prior `ifdef SYNC_REG always @(inst_vld_1 or stall_1_2 or dest_cfg_1 or dest_addr_1 or src_cfg_1 or alu_cfg_1 or wb_cfg_1 or imm_1 or pcn_1 or cond_jump_1 or b_en or jz_1 or jal_1) begin inst_vld_2 = (stall_1_2 || flush_pipeline) ? 1'b 0 : inst_vld_1; // Breaks the pipeline when reg needs to be stalled dest_cfg_2 = dest_cfg_1; dest_addr_2 = dest_addr_1; src_cfg_2 = src_cfg_1; alu_cfg_2 = alu_cfg_1; wb_cfg_2 = wb_cfg_1; imm_2 = imm_1; pcn_2 = pcn_1; cond_jump_2 = cond_jump_1 & b_en; // not valid unles b is enabled for read jz_2 = jz_1; jal_2 = jal_1; end `else // There is a pipeline inside the memory for the regfile // Need to account for memory pipeline to keep everything alligned always @(posedge clk or negedge reset_b) begin if (!reset_b) begin inst_vld_2 <= 'b 0; dest_cfg_2 <= 'b 0; dest_addr_2 <= 'b 0; src_cfg_2 <= 'b 0; alu_cfg_2 <= 'b 0; wb_cfg_2 <= 'b 0; imm_2 <= 'b 0; pcn_2 <= 'b 0; cond_jump_2 <= 'b 0; jz_2 <= 'b 0; jal_2 <= 'b 0; end else if (flush_pipeline) inst_vld_2 <= 'b 0; else if (!halt) begin inst_vld_2 <= (stall_1_2) ? 1'b 0 : inst_vld_1; // Breaks the pipeline when reg needs to be stalled if (inst_vld_1 && !stall_1_2) // This will save some power by causing unecessary toggling begin dest_cfg_2 <= dest_cfg_1; dest_addr_2 <= dest_addr_1; src_cfg_2 <= src_cfg_1; alu_cfg_2 <= alu_cfg_1; wb_cfg_2 <= wb_cfg_1; imm_2 <= imm_1; pcn_2 <= pcn_1; cond_jump_2 <= cond_jump_1 & b_en; // not valid unles b is enabled for read jz_2 <= jz_1; jal_2 <= jal_1; end end end `endif // Not sure if protection is needed or which stall (2 or 3) to use? // Load Stall protection circuit. always @(posedge clk or negedge reset_b) begin if (!reset_b) r_qra <= 'b 0; else if (!halt) r_qra <= qra; end assign spl_addr = (halt) ? r_qra : qra; // scratch pad memory load address from Reg A in pipeline 2 assign extr_addr = (halt) ? r_qra : qra; // ext bus load address from Reg A in pipeline 2 // End of memory load with stall protecttion // Ready to select source data for ALU always @(src_cfg_2 or qra or qrb or ext_ra or ext_rb or pcn_2 or imm_2) begin case (src_cfg_2) 3'b 000 : begin a_2 = qra; b_2 = qrb; end 3'b 001 : begin a_2 = qra; b_2 = {16'b 0, imm_2}; end 3'b 010 : begin a_2 = pcn_2; b_2 = qrb; end 3'b 011 : begin a_2 = pcn_2; b_2 = {16'b 0, imm_2}; end 3'b 100 : begin a_2 = qra; b_2 = ext_rb; end 3'b 101 : begin a_2 = ext_ra; b_2 = qrb; end 3'b 110 : begin a_2 = ext_ra; b_2 = {16'b 0, imm_2}; end 3'b 111 : begin a_2 = ext_ra; b_2 = ext_rb; end endcase end // --------- 3rd pipeline (ALU signals) ----------- always @(posedge clk or negedge reset_b) begin if (!reset_b) begin inst_vld_3 <= 'b 0; a_3 <= 'b 0; b_3 <= 'b 0; dest_cfg_3 <= 'b 0; dest_addr_3 <= 'b 0; alu_cfg_3 <= 'b 0; wb_cfg_3 <= 'b 0; pcn_3 <= 'b 0; cond_jump_3 <= 'b 0; jz_3 <= 'b 0; jal_3 <= 'b 0; spl_addr_3 <= 'b 0; spl_addr_3_wb <= 'b 0; spl_data_3_wb <= 'b 0; spl_we_3_wb <= 'b 0; end else if (flush_pipeline) // flush pipeline take priority inst_vld_3 <= 'b 0; else if (!stall_3) begin inst_vld_3 <= inst_vld_2; if (inst_vld_2) // For power savings begin a_3 <= a_2; b_3 <= b_2; dest_cfg_3 <= dest_cfg_2; dest_addr_3 <= dest_addr_2; alu_cfg_3 <= alu_cfg_2; wb_cfg_3 <= wb_cfg_2; pcn_3 <= pcn_2; cond_jump_3 <= cond_jump_2; jz_3 <= jz_2; jal_3 <= jal_2; spl_addr_3 <= spl_addr; spl_addr_3_wb <= spw_addr; spl_data_3_wb <= spw_data; spl_we_3_wb <= spw_we; end end end assign ext_alu_a = a_3; // allow ext ALU to see the inputs assign ext_alu_b = b_3; // allow ext ALU to see the inputs alu i_alu ( .opcode(alu_cfg_3), // alu function select .a(a_3), // a operand .b(b_3), // b operand .cin(1'b 0), // carry input (How do we handle this?) .ya(ya), // data output .yb(yb), // data output .cvnz_a(cvnz_a), // flag output for a .cvnz_b(cvnz_b) // flag output for b ); always @(spqa or spw_we or spl_addr_3 or spw_addr or spw_data or spl_we_3_wb or spl_addr_3_wb or spl_data_3_wb) begin if ((spl_addr_3 == spw_addr) && spw_we) spl_data = spw_data; else if ((spl_addr_3 == spl_addr_3_wb) && spl_we_3_wb) spl_data = spl_data_3_wb; else spl_data = spqa; end // New Pipeline 4 starts here always @(posedge clk or negedge reset_b) begin if (!reset_b) begin ext_result_4 <= 'b 0; ext_cvnz_4 <= 'b 0; spqa_4 <= 'b 0; ya_4 <= 'b 0; cvnz_a_4 <= 'b 0; yb_4 <= 'b 0; cvnz_b_4 <= 'b 0; inst_vld_4 <= 'b 0; wb_cfg_4 <= 'b 0; dest_addr_4 <= 'b 0; dest_cfg_4 <= 'b 0; pcn_4 <= 'b 0; cond_jump_4 <= 'b 0; jz_4 <= 'b 0; jal_4 <= 'b 0; end else if (flush_pipeline) // Pipeline flush takes priority over stall inst_vld_4 <= 'b 0; else if (!stall_4) begin inst_vld_4 <= inst_vld_3; if (inst_vld_3) // For power savings begin ext_result_4 <= ext_result; ext_cvnz_4 <= ext_cvnz; spqa_4 <= spl_data; ya_4 <= ya; cvnz_a_4 <= cvnz_a; yb_4 <= yb; cvnz_b_4 <= cvnz_b; inst_vld_4 <= inst_vld_3; wb_cfg_4 <= wb_cfg_3; dest_addr_4 <= dest_addr_3; dest_cfg_4 <= dest_cfg_3; pcn_4 <= pcn_3; cond_jump_4 <= cond_jump_3; jz_4 <= jz_3; jal_4 <= jal_3; end end end always @(wb_cfg_4 or ya_4 or cvnz_a_4 or yb_4 or cvnz_b_4 or spqa_4 or ext_cvnz_4 or ext_result_4) begin case (wb_cfg_4) 4'b 0000 : wb_data = ya_4; 4'b 0001 : wb_data = yb_4; 4'b 0010 : wb_data = spqa_4; 4'b 0011 : wb_data = ext_result_4; 4'b 0100 : wb_data = { {31{1'b 0}} , cvnz_a_4[0]}; // Store Z 4'b 0101 : wb_data = { {31{1'b 0}} , cvnz_a_4[1]}; // Store N 4'b 0110 : wb_data = { {31{1'b 0}} , cvnz_a_4[2]}; // Store V 4'b 0111 : wb_data = { {31{1'b 0}} , cvnz_a_4[3]}; // Store C 4'b 1000 : wb_data = { {31{1'b 0}} , cvnz_b_4[0]}; // Store Z 4'b 1001 : wb_data = { {31{1'b 0}} , cvnz_b_4[1]}; // Store N 4'b 1010 : wb_data = { {31{1'b 0}} , cvnz_b_4[2]}; // Store V 4'b 1011 : wb_data = { {31{1'b 0}} , cvnz_b_4[3]}; // Store C 4'b 1100 : wb_data = { {31{1'b 0}} , ext_cvnz_4[0]}; // Store Z 4'b 1101 : wb_data = { {31{1'b 0}} , ext_cvnz_4[1]}; // Store N 4'b 1110 : wb_data = { {31{1'b 0}} , ext_cvnz_4[2]}; // Store V 4'b 1111 : wb_data = { {31{1'b 0}} , ext_cvnz_4[3]}; // Store C endcase end // Destination handling always @(dest_cfg_4 or inst_vld_4 or cond_jump_4 or yb_4 or jz_4 or jal_4 or wb_data or pcn_4) begin if (inst_vld_4) case (dest_cfg_4) 2'b 00 : {wec, set_pc, spw_we, ext_we} = 4'b 1000; 2'b 01 : begin {spw_we, ext_we} = 2'b 00; if (wb_data == pcn_4) {wec, set_pc} = 2'b 00; // Don't allow simple jumps to the next instruction, wastes time else if (cond_jump_4) if (yb_4[0]^jz_4) // Conditional jump check (will not Link if not jump taken) begin wec = jal_4; set_pc = 1'b 1; end else // Cond jump not taken (nothing done) {wec, set_pc} = 2'b 00; else // Typical JAL type instruction begin wec = jal_4; set_pc = 1'b 1; end end 2'b 10 : {wec, set_pc, spw_we, ext_we} = 4'b 0010; 2'b 11 : {wec, set_pc, spw_we, ext_we} = 4'b 0001; default: {wec, set_pc, spw_we, ext_we} = 4'b 0000; endcase else {wec, set_pc, spw_we, ext_we} = 4'b 0000; end assign regc_data = (wec && set_pc) ? pcn_4 : wb_data; // data to write to reg port C (JAL or Data) assign addrc_wb = dest_addr_4; // reg file write back address assign nop_detect = inst_vld_4 & ~(wec | set_pc | spw_we | ext_we); // 1 when no operation is being done assign extw_data = wb_data; // extension data for writing assign extw_addr = yb_4; assign spw_addr = yb_4; // data from write back pipeline 4 assign spw_data = wb_data; // data from pipelined ALU output B endmodule