URL
https://opencores.org/ocsvn/t48/t48/trunk
Subversion Repositories t48
[/] [t48/] [tags/] [rel_0_6__beta/] [rtl/] [vhdl/] [p1.vhd] - Rev 100
Go to most recent revision | Compare with Previous | Blame | View Log
------------------------------------------------------------------------------- -- -- The Port 1 unit. -- Implements the Port 1 logic. -- -- $Id: p1.vhd,v 1.3 2004-05-17 14:37:53 arniml Exp $ -- -- All rights reserved -- -- Redistribution and use in source and synthezised forms, with or without -- modification, are permitted provided that the following conditions are met: -- -- Redistributions of source code must retain the above copyright notice, -- this list of conditions and the following disclaimer. -- -- Redistributions in synthesized form must reproduce the above copyright -- notice, this list of conditions and the following disclaimer in the -- documentation and/or other materials provided with the distribution. -- -- Neither the name of the author nor the names of other contributors may -- be used to endorse or promote products derived from this software without -- specific prior written permission. -- -- THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" -- AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, -- THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR -- PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE -- LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR -- CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF -- SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS -- INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN -- CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) -- ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE -- POSSIBILITY OF SUCH DAMAGE. -- -- Please report bugs to the author, but before you do so, please -- make sure that this is not a derivative work and that -- you have the latest version of this file. -- -- The latest version of this file can be found at: -- http://www.opencores.org/cvsweb.shtml/t48/ -- ------------------------------------------------------------------------------- library ieee; use ieee.std_logic_1164.all; use work.t48_pack.word_t; entity p1 is port ( -- Global Interface ------------------------------------------------------- clk_i : in std_logic; res_i : in std_logic; en_clk_i : in boolean; -- T48 Bus Interface ------------------------------------------------------ data_i : in word_t; data_o : out word_t; write_p1_i : in boolean; read_p1_i : in boolean; read_reg_i : in boolean; -- Port 1 Interface ------------------------------------------------------- p1_i : in word_t; p1_o : out word_t; p1_low_imp_o : out std_logic ); end p1; use work.t48_pack.clk_active_c; use work.t48_pack.res_active_c; use work.t48_pack.bus_idle_level_c; architecture rtl of p1 is -- the port output register signal p1_q : word_t; -- the low impedance marker signal low_imp_q : std_logic; begin ----------------------------------------------------------------------------- -- Process p1_reg -- -- Purpose: -- Implements the port output register. -- p1_reg: process (res_i, clk_i) begin if res_i = res_active_c then p1_q <= (others => '1'); low_imp_q <= '0'; elsif clk_i'event and clk_i = clk_active_c then if en_clk_i then if write_p1_i then p1_q <= data_i; low_imp_q <= '1'; else low_imp_q <= '0'; end if; end if; end if; end process p1_reg; -- ----------------------------------------------------------------------------- ----------------------------------------------------------------------------- -- Process p1_data -- -- Purpose: -- Generates the T48 bus data. -- p1_data: process (read_p1_i, p1_i, read_reg_i, p1_q) begin data_o <= (others => bus_idle_level_c); if read_p1_i then if read_reg_i then data_o <= p1_q; else data_o <= p1_i; end if; end if; end process p1_data; -- ----------------------------------------------------------------------------- ----------------------------------------------------------------------------- -- Output Mapping. ----------------------------------------------------------------------------- p1_o <= p1_q; p1_low_imp_o <= low_imp_q; end rtl; ------------------------------------------------------------------------------- -- File History: -- -- $Log: not supported by cvs2svn $ -- Revision 1.2 2004/03/29 19:39:58 arniml -- rename pX_limp to pX_low_imp -- -- Revision 1.1 2004/03/23 21:31:52 arniml -- initial check-in -- -------------------------------------------------------------------------------
Go to most recent revision | Compare with Previous | Blame | View Log