URL
https://opencores.org/ocsvn/t80/t80/trunk
Subversion Repositories t80
[/] [t80/] [trunk/] [rtl/] [vhdl/] [T8080se.vhd] - Rev 25
Go to most recent revision | Compare with Previous | Blame | View Log
-- -- 8080 compatible microprocessor core, synchronous top level with clock enable -- Different timing than the original 8080 -- Inputs needs to be synchronous and outputs may glitch -- -- Version : 0238 -- -- Copyright (c) 2002 Daniel Wallner (jesus@opencores.org) -- -- All rights reserved -- -- Redistribution and use in source and synthezised forms, with or without -- modification, are permitted provided that the following conditions are met: -- -- Redistributions of source code must retain the above copyright notice, -- this list of conditions and the following disclaimer. -- -- Redistributions in synthesized form must reproduce the above copyright -- notice, this list of conditions and the following disclaimer in the -- documentation and/or other materials provided with the distribution. -- -- Neither the name of the author nor the names of other contributors may -- be used to endorse or promote products derived from this software without -- specific prior written permission. -- -- THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" -- AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, -- THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR -- PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE -- LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR -- CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF -- SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS -- INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN -- CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) -- ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE -- POSSIBILITY OF SUCH DAMAGE. -- -- Please report bugs to the author, but before you do so, please -- make sure that this is not a derivative work and that -- you have the latest version of this file. -- -- The latest version of this file can be found at: -- http://www.opencores.org/cvsweb.shtml/t80/ -- -- Limitations : -- STACK status output not supported -- -- File history : -- -- 0237 : First version -- -- 0238 : Updated for T80 interface change -- library IEEE; use IEEE.std_logic_1164.all; use IEEE.numeric_std.all; use work.T80_Pack.all; entity T8080se is generic( Mode : integer := 2; -- 0 => Z80, 1 => Fast Z80, 2 => 8080, 3 => GB T2Write : integer := 0 -- 0 => WR_n active in T3, /=0 => WR_n active in T2 ); port( RESET_n : in std_logic; CLK : in std_logic; CLKEN : in std_logic; READY : in std_logic; HOLD : in std_logic; INT : in std_logic; INTE : out std_logic; DBIN : out std_logic; SYNC : out std_logic; VAIT : out std_logic; HLDA : out std_logic; WR_n : out std_logic; A : out std_logic_vector(15 downto 0); DI : in std_logic_vector(7 downto 0); DO : out std_logic_vector(7 downto 0) ); end T8080se; architecture rtl of T8080se is signal False_M1 : std_logic; signal IntCycle_n : std_logic; signal NoRead : std_logic; signal Write : std_logic; signal IORQ : std_logic; signal INT_n : std_logic; signal HALT_n : std_logic; signal BUSRQ_n : std_logic; signal BUSAK_n : std_logic; signal DO_i : std_logic_vector(7 downto 0); signal DI_Reg : std_logic_vector(7 downto 0); signal MCycle : std_logic_vector(2 downto 0); signal TState : std_logic_vector(2 downto 0); signal One : std_logic; begin INT_n <= not INT; BUSRQ_n <= HOLD; HLDA <= not BUSAK_n; SYNC <= '1' when TState = "001" else '0'; VAIT <= '1' when TState = "010" else '0'; One <= '1'; DO(0) <= not IntCycle_n when TState = "001" else DO_i(0); -- INTA DO(1) <= Write when TState = "001" else DO_i(1); -- WO_n DO(2) <= DO_i(2); -- STACK not supported !!!!!!!!!! DO(3) <= not HALT_n when TState = "001" else DO_i(3); -- HLTA DO(4) <= IORQ and Write when TState = "001" else DO_i(4); -- OUT DO(5) <= DO_i(5) when TState /= "001" else '1' when MCycle = "001" else '0'; -- M1 DO(6) <= IORQ and not Write when TState = "001" else DO_i(6); -- INP DO(7) <= not IORQ and not Write and IntCycle_n when TState = "001" else DO_i(7); -- MEMR u0 : T80 generic map( Mode => Mode) port map( CEN => CLKEN, M1_n => open, IORQ => IORQ, NoRead => NoRead, Write => Write, RFSH_n => open, HALT_n => HALT_n, WAIT_n => READY, INT_n => INT_n, NMI_n => One, RESET_n => RESET_n, BUSRQ_n => One, BUSAK_n => BUSAK_n, CLK_n => CLK, A => A, DInst => DI, DI => DI_Reg, DO => DO_i, MC => MCycle, TS => TState, False_M1 => False_M1, IntCycle_n => IntCycle_n, IntE => INTE); process (RESET_n, CLK) begin if RESET_n = '0' then DBIN <= '0'; WR_n <= '1'; DI_Reg <= "00000000"; elsif CLK'event and CLK = '1' then if CLKEN = '1' then DBIN <= '0'; WR_n <= '1'; if MCycle = "001" and False_M1 = '0' then if TState = "001" or (TState = "010" and READY = '0') then DBIN <= IntCycle_n; end if; else if (TState = "001" or (TState = "010" and READY = '0')) and NoRead = '0' and Write = '0' then DBIN <= '1'; end if; if T2Write = 0 then if TState = "010" and Write = '1' then WR_n <= '0'; end if; else if (TState = "001" or (TState = "010" and READY = '0')) and Write = '1' then WR_n <= '0'; end if; end if; end if; if TState = "010" and READY = '1' then DI_Reg <= DI; end if; end if; end if; end process; end;
Go to most recent revision | Compare with Previous | Blame | View Log