Subversion Repositories test_project

menuconfig NEW_LEDS
        bool "LED Support"
        depends on HAS_IOMEM
        help
          Say Y to enable Linux LED support.  This allows control of supported
          LEDs from both userspace and optionally, by kernel events (triggers).

          This is not related to standard keyboard LEDs which are controlled
          via the input system.

if NEW_LEDS

config LEDS_CLASS
        tristate "LED Class Support"
        help
          This option enables the led sysfs class in /sys/class/leds.  You'll
          need this to do anything useful with LEDs.  If unsure, say N.

comment "LED drivers"

config LEDS_CORGI
        tristate "LED Support for the Sharp SL-C7x0 series"
        depends on LEDS_CLASS && PXA_SHARP_C7xx
        help
          This option enables support for the LEDs on Sharp Zaurus
          SL-C7x0 series (C700, C750, C760, C860).

config LEDS_LOCOMO
        tristate "LED Support for Locomo device"
        depends on LEDS_CLASS && SHARP_LOCOMO
        help
          This option enables support for the LEDs on Sharp Locomo.
          Zaurus models SL-5500 and SL-5600.

config LEDS_SPITZ
        tristate "LED Support for the Sharp SL-Cxx00 series"
        depends on LEDS_CLASS && PXA_SHARP_Cxx00
        help
          This option enables support for the LEDs on Sharp Zaurus
          SL-Cxx00 series (C1000, C3000, C3100).

config LEDS_IXP4XX
        tristate "LED Support for GPIO connected LEDs on IXP4XX processors"
        depends on LEDS_CLASS && ARCH_IXP4XX
        help
          This option enables support for the LEDs connected to GPIO
          outputs of the Intel IXP4XX processors.  To be useful the
          particular board must have LEDs and they must be connected
          to the GPIO lines.  If unsure, say Y.

config LEDS_TOSA
        tristate "LED Support for the Sharp SL-6000 series"
        depends on LEDS_CLASS && PXA_SHARPSL
        help
          This option enables support for the LEDs on Sharp Zaurus
          SL-6000 series.

config LEDS_S3C24XX
        tristate "LED Support for Samsung S3C24XX GPIO LEDs"
        depends on LEDS_CLASS && ARCH_S3C2410
        help
          This option enables support for LEDs connected to GPIO lines
          on Samsung S3C24XX series CPUs, such as the S3C2410 and S3C2440.

config LEDS_AMS_DELTA
        tristate "LED Support for the Amstrad Delta (E3)"
        depends on LEDS_CLASS && MACH_AMS_DELTA
        help
          This option enables support for the LEDs on Amstrad Delta (E3).

config LEDS_NET48XX
        tristate "LED Support for Soekris net48xx series Error LED"
        depends on LEDS_CLASS && SCx200_GPIO
        help
          This option enables support for the Soekris net4801 and net4826 error
          LED.

config LEDS_WRAP
        tristate "LED Support for the WRAP series LEDs"
        depends on LEDS_CLASS && SCx200_GPIO
        help
          This option enables support for the PCEngines WRAP programmable LEDs.

config LEDS_H1940
        tristate "LED Support for iPAQ H1940 device"
        depends on LEDS_CLASS && ARCH_H1940
        help
          This option enables support for the LEDs on the h1940.

config LEDS_COBALT_QUBE
        tristate "LED Support for the Cobalt Qube series front LED"
        depends on LEDS_CLASS && MIPS_COBALT
        help
          This option enables support for the front LED on Cobalt Qube series

config LEDS_COBALT_RAQ
        bool "LED Support for the Cobalt Raq series"
        depends on LEDS_CLASS && MIPS_COBALT
        select LEDS_TRIGGERS
        help
          This option enables support for the Cobalt Raq series LEDs.

config LEDS_GPIO
        tristate "LED Support for GPIO connected LEDs"
        depends on LEDS_CLASS && GENERIC_GPIO
        help
          This option enables support for the LEDs connected to GPIO
          outputs. To be useful the particular board must have LEDs
          and they must be connected to the GPIO lines.

config LEDS_CM_X270
        tristate "LED Support for the CM-X270 LEDs"
        depends on LEDS_CLASS && MACH_ARMCORE
        help
          This option enables support for the CM-X270 LEDs.

comment "LED Triggers"

config LEDS_TRIGGERS
        bool "LED Trigger support"
        help
          This option enables trigger support for the leds class.
          These triggers allow kernel events to drive the LEDs and can
          be configured via sysfs. If unsure, say Y.

config LEDS_TRIGGER_TIMER
        tristate "LED Timer Trigger"
        depends on LEDS_TRIGGERS
        help
          This allows LEDs to be controlled by a programmable timer
          via sysfs. If unsure, say Y.

config LEDS_TRIGGER_IDE_DISK
        bool "LED IDE Disk Trigger"
        depends on LEDS_TRIGGERS && BLK_DEV_IDEDISK
        help
          This allows LEDs to be controlled by IDE disk activity.
          If unsure, say Y.

config LEDS_TRIGGER_HEARTBEAT
        tristate "LED Heartbeat Trigger"
        depends on LEDS_TRIGGERS
        help
          This allows LEDs to be controlled by a CPU load average.
          The flash frequency is a hyperbolic function of the 1-minute
          load average.
          If unsure, say Y.

endif # NEW_LEDS