Subversion Repositories test_project

#
# Makefile for the Linux network (wan) device drivers.
#
# 3 Aug 2000, Christoph Hellwig <hch@infradead.org>
# Rewritten to use lists instead of if-statements.
#

cyclomx-y                       := cycx_main.o
cyclomx-$(CONFIG_CYCLOMX_X25)   += cycx_x25.o
cyclomx-objs                    := $(cyclomx-y)  

obj-$(CONFIG_HDLC)              += hdlc.o
obj-$(CONFIG_HDLC_RAW)          += hdlc_raw.o
obj-$(CONFIG_HDLC_RAW_ETH)      += hdlc_raw_eth.o
obj-$(CONFIG_HDLC_CISCO)        += hdlc_cisco.o
obj-$(CONFIG_HDLC_FR)           += hdlc_fr.o
obj-$(CONFIG_HDLC_PPP)          += hdlc_ppp.o   syncppp.o
obj-$(CONFIG_HDLC_X25)          += hdlc_x25.o

pc300-y                         := pc300_drv.o
pc300-$(CONFIG_PC300_MLPPP)     += pc300_tty.o
pc300-objs                      := $(pc300-y)

obj-$(CONFIG_HOSTESS_SV11)      += z85230.o     syncppp.o       hostess_sv11.o
obj-$(CONFIG_SEALEVEL_4021)     += z85230.o     syncppp.o       sealevel.o
obj-$(CONFIG_COSA)              +=              syncppp.o       cosa.o
obj-$(CONFIG_FARSYNC)           +=              syncppp.o       farsync.o
obj-$(CONFIG_DSCC4)             +=                              dscc4.o
obj-$(CONFIG_LANMEDIA)          +=              syncppp.o
obj-$(CONFIG_X25_ASY)           += x25_asy.o

obj-$(CONFIG_LANMEDIA)          += lmc/

obj-$(CONFIG_DLCI)              += dlci.o 
obj-$(CONFIG_SDLA)              += sdla.o
obj-$(CONFIG_CYCLADES_SYNC)     += cycx_drv.o cyclomx.o
obj-$(CONFIG_LAPBETHER)         += lapbether.o
obj-$(CONFIG_SBNI)              += sbni.o
obj-$(CONFIG_PC300)             += pc300.o
obj-$(CONFIG_N2)                += n2.o
obj-$(CONFIG_C101)              += c101.o
obj-$(CONFIG_WANXL)             += wanxl.o
obj-$(CONFIG_PCI200SYN)         += pci200syn.o
obj-$(CONFIG_PC300TOO)          += pc300too.o

clean-files := wanxlfw.inc
$(obj)/wanxl.o: $(obj)/wanxlfw.inc

ifeq ($(CONFIG_WANXL_BUILD_FIRMWARE),y)
ifeq ($(ARCH),m68k)
  AS68K = $(AS)
  LD68K = $(LD)
else
  AS68K = as68k
  LD68K = ld68k
endif

quiet_cmd_build_wanxlfw = BLD FW  $@
      cmd_build_wanxlfw = \
        $(CPP) -Wp,-MD,$(depfile) -I$(srctree)/include $< | $(AS68K) -m68360 -o $(obj)/wanxlfw.o; \
        $(LD68K) --oformat binary -Ttext 0x1000 $(obj)/wanxlfw.o -o $(obj)/wanxlfw.bin; \
        hexdump -ve '"\n" 16/1 "0x%02X,"' $(obj)/wanxlfw.bin | sed 's/0x  ,//g;1s/^/static u8 firmware[]={/;$$s/,$$/\n};\n/' >$(obj)/wanxlfw.inc; \
        rm -f $(obj)/wanxlfw.bin $(obj)/wanxlfw.o

$(obj)/wanxlfw.inc:     $(src)/wanxlfw.S
        $(call if_changed_dep,build_wanxlfw)
targets += wanxlfw.inc
endif