Subversion Repositories test_project

#
# PCCARD (PCMCIA/CardBus) bus subsystem configuration
#

menuconfig PCCARD
        tristate "PCCard (PCMCIA/CardBus) support"
        depends on HOTPLUG
        ---help---
          Say Y here if you want to attach PCMCIA- or PC-cards to your Linux
          computer.  These are credit-card size devices such as network cards,
          modems or hard drives often used with laptops computers.  There are
          actually two varieties of these cards: 16 bit PCMCIA and 32 bit
          CardBus cards.

          To compile this driver as modules, choose M here: the
          module will be called pcmcia_core.

if PCCARD

config PCMCIA_DEBUG
        bool "Enable PCCARD debugging"
        help
          Say Y here to enable PCMCIA subsystem debugging.  You
          will need to choose the debugging level either via the
          kernel command line, or module options depending whether
          you build the PCMCIA as modules.

          The kernel command line options are:
            pcmcia_core.pc_debug=N
            pcmcia.pc_debug=N
            sa11xx_core.pc_debug=N

          The module option is called pc_debug=N

          In all the above examples, N is the debugging verbosity
          level.

config PCMCIA
        tristate "16-bit PCMCIA support"
        select CRC32
        default y
        ---help---
           This option enables support for 16-bit PCMCIA cards. Most older
           PC-cards are such 16-bit PCMCIA cards, so unless you know you're
           only using 32-bit CardBus cards, say Y or M here.

           To use 16-bit PCMCIA cards, you will need supporting software in
           most cases. (see the file <file:Documentation/Changes> for
           location and details).

           To compile this driver as modules, choose M here: the
           module will be called pcmcia.

           If unsure, say Y.

config PCMCIA_LOAD_CIS
        bool "Load CIS updates from userspace (EXPERIMENTAL)"
        depends on PCMCIA && EXPERIMENTAL
        select FW_LOADER
        default y
        help
          Some PCMCIA cards require an updated Card Information Structure (CIS)
          to be loaded from userspace to work correctly. If you say Y here,
          and your userspace is arranged correctly, this will be loaded
          automatically using the in-kernel firmware loader and the hotplug
          subsystem, instead of relying on cardmgr from pcmcia-cs to do so.

          If unsure, say Y.

config PCMCIA_IOCTL
        bool "PCMCIA control ioctl (obsolete)"
        depends on PCMCIA
        default y
        help
          If you say Y here, the deprecated ioctl interface to the PCMCIA
          subsystem will be built. It is needed by cardmgr and cardctl
          (pcmcia-cs) to function properly.

          You should use the new pcmciautils package instead (see
          <file:Documentation/Changes> for location and details).

          If unsure, say Y.

config CARDBUS
        bool "32-bit CardBus support"   
        depends on PCI
        default y
        ---help---
          CardBus is a bus mastering architecture for PC-cards, which allows
          for 32 bit PC-cards (the original PCMCIA standard specifies only
          a 16 bit wide bus). Many newer PC-cards are actually CardBus cards.

          To use 32 bit PC-cards, you also need a CardBus compatible host
          bridge. Virtually all modern PCMCIA bridges do this, and most of
          them are "yenta-compatible", so say Y or M there, too.

          If unsure, say Y.

comment "PC-card bridges"

config YENTA
        tristate "CardBus yenta-compatible bridge support"
        depends on PCI
        select CARDBUS if !EMBEDDED
        select PCCARD_NONSTATIC
        ---help---
          This option enables support for CardBus host bridges.  Virtually
          all modern PCMCIA bridges are CardBus compatible.  A "bridge" is 
          the hardware inside your computer that PCMCIA cards are plugged 
          into.

          To compile this driver as modules, choose M here: the
          module will be called yenta_socket.

          If unsure, say Y.

config YENTA_O2
        default y
        bool "Special initialization for O2Micro bridges" if EMBEDDED
        depends on YENTA

config YENTA_RICOH
        default y
        bool "Special initialization for Ricoh bridges" if EMBEDDED
        depends on YENTA

config YENTA_TI
        default y
        bool "Special initialization for TI and EnE bridges" if EMBEDDED
        depends on YENTA

config YENTA_ENE_TUNE
        default y
        bool "Auto-tune EnE bridges for CB cards" if EMBEDDED
        depends on YENTA_TI && CARDBUS

config YENTA_TOSHIBA
        default y
        bool "Special initialization for Toshiba ToPIC bridges" if EMBEDDED
        depends on YENTA

config PD6729
        tristate "Cirrus PD6729 compatible bridge support"
        depends on PCMCIA && PCI
        select PCCARD_NONSTATIC
        help
          This provides support for the Cirrus PD6729 PCI-to-PCMCIA bridge
          device, found in some older laptops and PCMCIA card readers.

config I82092
        tristate "i82092 compatible bridge support"
        depends on PCMCIA && PCI
        select PCCARD_NONSTATIC
        help
          This provides support for the Intel I82092AA PCI-to-PCMCIA bridge device,
          found in some older laptops and more commonly in evaluation boards for the
          chip.

config I82365
        tristate "i82365 compatible bridge support"
        depends on PCMCIA && ISA
        select PCCARD_NONSTATIC
        help
          Say Y here to include support for ISA-bus PCMCIA host bridges that
          are register compatible with the Intel i82365.  These are found on
          older laptops and ISA-bus card readers for desktop systems.  A
          "bridge" is the hardware inside your computer that PCMCIA cards are
          plugged into. If unsure, say N.

config TCIC
        tristate "Databook TCIC host bridge support"
        depends on PCMCIA && ISA
        select PCCARD_NONSTATIC
        help
          Say Y here to include support for the Databook TCIC family of PCMCIA
          host bridges. These are only found on a handful of old systems.
          "Bridge" is the name used for the hardware inside your computer that
          PCMCIA cards are plugged into. If unsure, say N.

config PCMCIA_M8XX
        tristate "MPC8xx PCMCIA support"
        depends on PCMCIA && PPC && 8xx
        select PCCARD_IODYN
        select PCCARD_NONSTATIC
        help
          Say Y here to include support for PowerPC 8xx series PCMCIA
          controller.

          This driver is also available as a module called m8xx_pcmcia.

config HD64465_PCMCIA
        tristate "HD64465 host bridge support"
        depends on HD64465 && PCMCIA

config PCMCIA_AU1X00
        tristate "Au1x00 pcmcia support"
        depends on SOC_AU1X00 && PCMCIA

config PCMCIA_SA1100
        tristate "SA1100 support"
        depends on ARM && ARCH_SA1100 && PCMCIA
        help
          Say Y here to include support for SA11x0-based PCMCIA or CF
          sockets, found on HP iPAQs, Yopy, and other StrongARM(R)/
          Xscale(R) embedded machines.

          This driver is also available as a module called sa1100_cs.

config PCMCIA_SA1111
        tristate "SA1111 support"
        depends on ARM && ARCH_SA1100 && SA1111 && PCMCIA
        help
          Say Y  here to include support for SA1111-based PCMCIA or CF
          sockets, found on the Jornada 720, Graphicsmaster and other
          StrongARM(R)/Xscale(R) embedded machines.

          This driver is also available as a module called sa1111_cs.

config PCMCIA_PXA2XX
        tristate "PXA2xx support"
        depends on ARM && ARCH_PXA && PCMCIA
        help
          Say Y here to include support for the PXA2xx PCMCIA controller

config PCMCIA_PROBE
        bool
        default y if ISA && !ARCH_SA1100 && !ARCH_CLPS711X && !PARISC

config M32R_PCC
        bool "M32R PCMCIA I/F"
        depends on M32R && CHIP_M32700 && PCMCIA
        select PCCARD_NONSTATIC
        help
          Say Y here to use the M32R PCMCIA controller.

config M32R_CFC
        bool "M32R CF I/F Controller"
        depends on M32R && (PLAT_USRV || PLAT_M32700UT || PLAT_MAPPI2 || PLAT_MAPPI3 || PLAT_OPSPUT)
        select PCCARD_NONSTATIC
        help
          Say Y here to use the M32R CompactFlash controller.

config M32R_CFC_NUM
        int "M32R CF I/F number"
        depends on M32R_CFC
        default "1" if PLAT_USRV || PLAT_M32700UT || PLAT_MAPPI2 || PLAT_MAPPI3 || PLAT_OPSPUT
        help
          Set the number of M32R CF slots.

config PCMCIA_VRC4171
        tristate "NEC VRC4171 Card Controllers support"
        depends on CPU_VR41XX && ISA && PCMCIA

config PCMCIA_VRC4173
        tristate "NEC VRC4173 CARDU support"
        depends on CPU_VR41XX && PCI && PCMCIA

config OMAP_CF
        tristate "OMAP CompactFlash Controller"
        depends on PCMCIA && ARCH_OMAP16XX
        help
          Say Y here to support the CompactFlash controller on OMAP.
          Note that this doesn't support "True IDE" mode.

config AT91_CF
        tristate "AT91 CompactFlash Controller"
        depends on PCMCIA && ARCH_AT91RM9200
        help
          Say Y here to support the CompactFlash controller on AT91 chips.
          Or choose M to compile the driver as a module named "at91_cf".

config ELECTRA_CF
        tristate "Electra CompactFlash Controller"
        depends on PCMCIA && PPC_PASEMI
        help
          Say Y here to support the CompactFlash controller on the
          PA Semi Electra eval board.

config PCCARD_NONSTATIC
        tristate

config PCCARD_IODYN
        bool

endif   # PCCARD