Subversion Repositories test_project

#
# Makefile for kernel SPI drivers.
#

ifeq ($(CONFIG_SPI_DEBUG),y)
EXTRA_CFLAGS += -DDEBUG
endif

# small core, mostly translating board-specific
# config declarations into driver model code
obj-$(CONFIG_SPI_MASTER)                += spi.o

# SPI master controller drivers (bus)
obj-$(CONFIG_SPI_ATMEL)                 += atmel_spi.o
obj-$(CONFIG_SPI_BFIN)                  += spi_bfin5xx.o
obj-$(CONFIG_SPI_BITBANG)               += spi_bitbang.o
obj-$(CONFIG_SPI_AU1550)                += au1550_spi.o
obj-$(CONFIG_SPI_BUTTERFLY)             += spi_butterfly.o
obj-$(CONFIG_SPI_IMX)                   += spi_imx.o
obj-$(CONFIG_SPI_LM70_LLP)              += spi_lm70llp.o
obj-$(CONFIG_SPI_PXA2XX)                += pxa2xx_spi.o
obj-$(CONFIG_SPI_OMAP_UWIRE)            += omap_uwire.o
obj-$(CONFIG_SPI_OMAP24XX)              += omap2_mcspi.o
obj-$(CONFIG_SPI_MPC52xx_PSC)           += mpc52xx_psc_spi.o
obj-$(CONFIG_SPI_MPC83xx)               += spi_mpc83xx.o
obj-$(CONFIG_SPI_S3C24XX_GPIO)          += spi_s3c24xx_gpio.o
obj-$(CONFIG_SPI_S3C24XX)               += spi_s3c24xx.o
obj-$(CONFIG_SPI_TXX9)                  += spi_txx9.o
obj-$(CONFIG_SPI_XILINX)                += xilinx_spi.o
#       ... add above this line ...

# SPI protocol drivers (device/link on bus)
obj-$(CONFIG_SPI_AT25)          += at25.o
obj-$(CONFIG_SPI_SPIDEV)        += spidev.o
obj-$(CONFIG_SPI_TLE62X0)       += tle62x0.o
#       ... add above this line ...

# SPI slave controller drivers (upstream link)
#       ... add above this line ...

# SPI slave drivers (protocol for that link)
#       ... add above this line ...