Subversion Repositories test_project

#
# Amateur Radio protocols and AX.25 device configuration
#

menuconfig HAMRADIO
        depends on NET && !S390
        bool "Amateur Radio support"
        help
          If you want to connect your Linux box to an amateur radio, answer Y
          here. You want to read <http://www.tapr.org/tapr/html/pkthome.html>
          and more specifically about AX.25 on Linux
          <http://www.linux-ax25.org/>.

          Note that the answer to this question won't directly affect the
          kernel: saying N will just cause the configurator to skip all
          the questions about amateur radio.

comment "Packet Radio protocols"
        depends on HAMRADIO

config AX25
        tristate "Amateur Radio AX.25 Level 2 protocol"
        depends on HAMRADIO
        help
          This is the protocol used for computer communication over amateur
          radio. It is either used by itself for point-to-point links, or to
          carry other protocols such as tcp/ip. To use it, you need a device
          that connects your Linux box to your amateur radio. You can either
          use a low speed TNC (a Terminal Node Controller acts as a kind of
          modem connecting your computer's serial port to your radio's
          microphone input and speaker output) supporting the KISS protocol or
          one of the various SCC cards that are supported by the generic Z8530
          or the DMA SCC driver. Another option are the Baycom modem serial
          and parallel port hacks or the sound card modem (supported by their
          own drivers). If you say Y here, you also have to say Y to one of
          those drivers.

          Information about where to get supporting software for Linux amateur
          radio as well as information about how to configure an AX.25 port is
          contained in the AX25-HOWTO, available from
          <http://www.tldp.org/docs.html#howto>. You might also want to
          check out the file <file:Documentation/networking/ax25.txt> in the
          kernel source. More information about digital amateur radio in
          general is on the WWW at
          <http://www.tapr.org/tapr/html/pkthome.html>.

          To compile this driver as a module, choose M here: the
          module will be called ax25.

config AX25_DAMA_SLAVE
        bool "AX.25 DAMA Slave support"
        default y
        depends on AX25
        help
          DAMA is a mechanism to prevent collisions when doing AX.25
          networking. A DAMA server (called "master") accepts incoming traffic
          from clients (called "slaves") and redistributes it to other slaves.
          If you say Y here, your Linux box will act as a DAMA slave; this is
          transparent in that you don't have to do any special DAMA
          configuration. Linux cannot yet act as a DAMA server.  This option
          only compiles DAMA slave support into the kernel.  It still needs to
          be enabled at runtime.  For more about DAMA see
          <http://www.linux-ax25.org>.  If unsure, say Y.

# placeholder until implemented
config AX25_DAMA_MASTER
        bool 'AX.25 DAMA Master support'
        depends on AX25_DAMA_SLAVE && BROKEN
        help
          DAMA is a mechanism to prevent collisions when doing AX.25
          networking. A DAMA server (called "master") accepts incoming traffic
          from clients (called "slaves") and redistributes it to other slaves.
          If you say Y here, your Linux box will act as a DAMA master; this is
          transparent in that you don't have to do any special DAMA
          configuration. Linux cannot yet act as a DAMA server.  This option
          only compiles DAMA slave support into the kernel.  It still needs to
          be explicitly enabled, so if unsure, say Y.

config NETROM
        tristate "Amateur Radio NET/ROM protocol"
        depends on AX25
        help
          NET/ROM is a network layer protocol on top of AX.25 useful for
          routing.

          A comprehensive listing of all the software for Linux amateur radio
          users as well as information about how to configure an AX.25 port is
          contained in the Linux Ham Wiki, available from
          <http://www.linux-ax25.org>. You also might want to check out the
          file <file:Documentation/networking/ax25.txt>. More information about
          digital amateur radio in general is on the WWW at
          <http://www.tapr.org/tapr/html/pkthome.html>.

          To compile this driver as a module, choose M here: the
          module will be called netrom.

config ROSE
        tristate "Amateur Radio X.25 PLP (Rose)"
        depends on AX25
        help
          The Packet Layer Protocol (PLP) is a way to route packets over X.25
          connections in general and amateur radio AX.25 connections in
          particular, essentially an alternative to NET/ROM.

          A comprehensive listing of all the software for Linux amateur radio
          users as well as information about how to configure an AX.25 port is
          contained in the Linux Ham Wiki, available from
          <http://www.linux-ax25.org>.  You also might want to check out the
          file <file:Documentation/networking/ax25.txt>. More information about
          digital amateur radio in general is on the WWW at
          <http://www.tapr.org/tapr/html/pkthome.html>.

          To compile this driver as a module, choose M here: the
          module will be called rose.

menu "AX.25 network device drivers"
        depends on HAMRADIO && AX25

source "drivers/net/hamradio/Kconfig"

endmenu