URL
https://opencores.org/ocsvn/test_project/test_project/trunk
Subversion Repositories test_project
[/] [test_project/] [trunk/] [rtl/] [verilog/] [components/] [uart16550/] [uart_debug_if.v] - Rev 27
Go to most recent revision | Compare with Previous | Blame | View Log
////////////////////////////////////////////////////////////////////// //// //// //// uart_debug_if.v //// //// //// //// //// //// This file is part of the "UART 16550 compatible" project //// //// http://www.opencores.org/cores/uart16550/ //// //// //// //// Documentation related to this project: //// //// - http://www.opencores.org/cores/uart16550/ //// //// //// //// Projects compatibility: //// //// - WISHBONE //// //// RS232 Protocol //// //// 16550D uart (mostly supported) //// //// //// //// Overview (main Features): //// //// UART core debug interface. //// //// //// //// Author(s): //// //// - gorban@opencores.org //// //// - Jacob Gorban //// //// //// //// Created: 2001/12/02 //// //// (See log for the revision history) //// //// //// ////////////////////////////////////////////////////////////////////// //// //// //// Copyright (C) 2000, 2001 Authors //// //// //// //// This source file may be used and distributed without //// //// restriction provided that this copyright statement is not //// //// removed from the file and that any derivative work contains //// //// the original copyright notice and the associated disclaimer. //// //// //// //// This source file is free software; you can redistribute it //// //// and/or modify it under the terms of the GNU Lesser General //// //// Public License as published by the Free Software Foundation; //// //// either version 2.1 of the License, or (at your option) any //// //// later version. //// //// //// //// This source is distributed in the hope that it will be //// //// useful, but WITHOUT ANY WARRANTY; without even the implied //// //// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR //// //// PURPOSE. See the GNU Lesser General Public License for more //// //// details. //// //// //// //// You should have received a copy of the GNU Lesser General //// //// Public License along with this source; if not, download it //// //// from http://www.opencores.org/lgpl.shtml //// //// //// ////////////////////////////////////////////////////////////////////// // // CVS Revision History // // $Log: uart_debug_if.v,v $ // Revision 1.5 2002/07/29 21:16:18 gorban // The uart_defines.v file is included again in sources. // // Revision 1.4 2002/07/22 23:02:23 gorban // Bug Fixes: // * Possible loss of sync and bad reception of stop bit on slow baud rates fixed. // Problem reported by Kenny.Tung. // * Bad (or lack of ) loopback handling fixed. Reported by Cherry Withers. // // Improvements: // * Made FIFO's as general inferrable memory where possible. // So on FPGA they should be inferred as RAM (Distributed RAM on Xilinx). // This saves about 1/3 of the Slice count and reduces P&R and synthesis times. // // * Added optional baudrate output (baud_o). // This is identical to BAUDOUT* signal on 16550 chip. // It outputs 16xbit_clock_rate - the divided clock. // It's disabled by default. Define UART_HAS_BAUDRATE_OUTPUT to use. // // Revision 1.3 2001/12/19 08:40:03 mohor // Warnings fixed (unused signals removed). // // Revision 1.2 2001/12/12 22:17:30 gorban // some synthesis bugs fixed // // Revision 1.1 2001/12/04 21:14:16 gorban // committed the debug interface file // // synopsys translate_off `include "timescale.v" // synopsys translate_on `include "uart_defines.v" module uart_debug_if (/*AUTOARG*/ // Outputs wb_dat32_o, // Inputs wb_adr_i, ier, iir, fcr, mcr, lcr, msr, lsr, rf_count, tf_count, tstate, rstate ) ; input [`UART_ADDR_WIDTH-1:0] wb_adr_i; output [31:0] wb_dat32_o; input [3:0] ier; input [3:0] iir; input [1:0] fcr; /// bits 7 and 6 of fcr. Other bits are ignored input [4:0] mcr; input [7:0] lcr; input [7:0] msr; input [7:0] lsr; input [`UART_FIFO_COUNTER_W-1:0] rf_count; input [`UART_FIFO_COUNTER_W-1:0] tf_count; input [2:0] tstate; input [3:0] rstate; wire [`UART_ADDR_WIDTH-1:0] wb_adr_i; reg [31:0] wb_dat32_o; always @(/*AUTOSENSE*/fcr or ier or iir or lcr or lsr or mcr or msr or rf_count or rstate or tf_count or tstate or wb_adr_i) case (wb_adr_i) // 8 + 8 + 4 + 4 + 8 5'b01000: wb_dat32_o = {msr,lcr,iir,ier,lsr}; // 5 + 2 + 5 + 4 + 5 + 3 5'b01100: wb_dat32_o = {8'b0, fcr,mcr, rf_count, rstate, tf_count, tstate}; default: wb_dat32_o = 0; endcase // case(wb_adr_i) endmodule // uart_debug_if
Go to most recent revision | Compare with Previous | Blame | View Log