Subversion Repositories test_project

CUR_DIR=$(shell pwd)
PROJECT_ROOT=$(CUR_DIR)/../..

# Define these tests if none were on the command line
TESTS ?= basic-nocache cbasic-nocache-O2 dhry-nocache-O2 except-nocache mmu-nocache mul-nocache-O2 syscall-nocache tick-nocache uart-nocache basic-icdc cbasic-icdc-O2 dhry-icdc-O2 except-icdc mmu-icdc mul-icdc-O2 syscall-icdc tick-icdc uart-icdc
#TESTS = basic-nocache cbasic-nocache-O2

SIM_DIR=$(PROJECT_ROOT)/sim
SIM_RUN_DIR=$(SIM_DIR)/run
SIM_BIN_DIR=$(SIM_DIR)/bin
SIM_RESULTS_DIR=$(SIM_DIR)/results

BENCH_DIR=$(PROJECT_ROOT)/bench
BACKEND_DIR=$(PROJECT_ROOT)/backend
BENCH_VERILOG_DIR=$(BENCH_DIR)/verilog

RTL_VERILOG_DIR=$(PROJECT_ROOT)/rtl/verilog


SW_DIR=$(PROJECT_ROOT)/sw

ICARUS=iverilog
ICARUS_VVP=vvp
ICARUS_COMMAND_FILE=icarus.scr
SIM_MEM_FILE="flash.in"
SIM_SUCCESS_MESSAGE=deaddead

.PHONY: prepare_rtl
prepare_rtl:
        @cd $(RTL_VERILOG_DIR)/components/wb_sdram_ctrl && perl fizzim.pl -encoding onehot -terse < wb_sdram_ctrl_fsm.fzm > wb_sdram_ctrl_fsm.v

.PHONY: prepare_sw
prepare_sw:
        @$(MAKE) -C $(SW_DIR)/support
        @$(MAKE) -C $(SW_DIR)/utils

tests: prepare_sw prepare_rtl
        @if [ ! -d $(SIM_RESULTS_DIR) ]; then mkdir -p $(SIM_RESULTS_DIR); fi
        @echo
        @echo "Beginning loop that will complete the following tests: $(TESTS)"
        @echo
        @for TEST in $(TESTS); do \
                echo "################################################################################"; \
                echo; \
                echo "\t#### Current test: $$TEST ####"; echo; \
                echo "\t#### Compiling software ####"; echo; \
                CURRENT_TEST_SW_DIR=$(SW_DIR)/`echo $$TEST | cut -d "-" -f 1`; \
                $(MAKE) -C $$CURRENT_TEST_SW_DIR $$TEST; \
                rm -f $(SIM_RUN_DIR)/$(SIM_MEM_FILE); \
                ln -s $$CURRENT_TEST_SW_DIR/$$TEST.hex $(SIM_RUN_DIR)/$(SIM_MEM_FILE); \
                sed < $(SIM_BIN_DIR)/$(ICARUS_COMMAND_FILE) > $(SIM_RUN_DIR)/$(ICARUS_COMMAND_FILE).generated \
                        -e s!\$$BENCH_DIR!$(BENCH_VERILOG_DIR)!              \
                        -e s!\$$RTL_DIR!$(RTL_VERILOG_DIR)!                  \
                        -e s!\$$BACKEND_DIR!$(BACKEND_DIR)!                  \
                        -e \\!^//.*\$$!d -e \\!^\$$!d ; \
                echo "+define+TEST_DEFINE_FILE=\"test_define.v\"" >> $(SIM_RUN_DIR)/$(ICARUS_COMMAND_FILE).generated; \
                if [ ! -z $$VCD ]; \
                        then echo "+define+VCD" >> $(SIM_RUN_DIR)/$(ICARUS_COMMAND_FILE).generated; \
                fi; \
                echo "\`define TEST_NAME_STRING \"$$TEST\"" > $(SIM_RUN_DIR)/test_define.v; \
                echo "\`define TEST_RESULTS_DIR \"$(SIM_RESULTS_DIR)/\" " >> $(SIM_RUN_DIR)/test_define.v; \
                echo ; \
                echo "\t#### Compiling RTL ####"; \
                rm -f $(SIM_RUN_DIR)/a.out; \
                $(ICARUS) -c $(SIM_RUN_DIR)/$(ICARUS_COMMAND_FILE).generated $(RTL_SIM_FLAGS); \
                echo; \
                echo "\t#### Beginning simulation ####"; \
                time -p $(ICARUS_VVP) -l $(SIM_RESULTS_DIR)/$$TEST-vvp-out.log a.out ; \
                TEST_RESULT=`tail -n 1 $(SIM_RESULTS_DIR)/$$TEST-general.log | grep $(SIM_SUCCESS_MESSAGE) -c`; \
                echo; echo "\t####"; \
                if [ $$TEST_RESULT -gt 0 ]; then \
                        echo "\t#### Test $$TEST PASSED ####";\
                else    echo "\t#### Test $$TEST FAILED ####";\
                fi; \
                echo "\t####"; echo; \
        done


nctests: prepare_sw prepare_rtl
        @if [ ! -d $(SIM_RESULTS_DIR) ]; then mkdir -p $(SIM_RESULTS_DIR); fi
        @echo
        @echo "Beginning loop that will complete the following tests: $(TESTS)"
        @echo
        @for TEST in $(TESTS); do \
                echo "################################################################################"; \
                echo; \
                echo "\t#### Current test: $$TEST ####"; echo; \
                echo "\t#### Compiling software ####"; echo; \
                CURRENT_TEST_SW_DIR=$(SW_DIR)/`echo $$TEST | cut -d "-" -f 1`; \
                $(MAKE) -C $$CURRENT_TEST_SW_DIR $$TEST; \
                rm -f $(SIM_RUN_DIR)/$(SIM_MEM_FILE); \
                ln -s $$CURRENT_TEST_SW_DIR/$$TEST.hex $(SIM_RUN_DIR)/$(SIM_MEM_FILE); \
                sed < $(SIM_BIN_DIR)/$(ICARUS_COMMAND_FILE) > $(SIM_RUN_DIR)/$(ICARUS_COMMAND_FILE).generated \
                        -e s!\$$BENCH_DIR!$(BENCH_VERILOG_DIR)!              \
                        -e s!\$$RTL_DIR!$(RTL_VERILOG_DIR)!                  \
                        -e s!\$$BACKEND_DIR!$(BACKEND_DIR)!                  \
                        -e \\!^//.*\$$!d -e \\!^\$$!d ; \
                echo "+define+TEST_DEFINE_FILE=\"test_define.v\"" >> $(SIM_RUN_DIR)/$(ICARUS_COMMAND_FILE).generated; \
                if [ ! -z $$VCD ]; \
                        then echo "+define+VCD" >> $(SIM_RUN_DIR)/$(ICARUS_COMMAND_FILE).generated; \
                        echo "+access+r" >> $(SIM_RUN_DIR)/$(ICARUS_COMMAND_FILE).generated; \
                fi; \
                echo "\`define TEST_NAME_STRING \"$$TEST\"" > $(SIM_RUN_DIR)/test_define.v; \
                echo "\`define TEST_RESULTS_DIR \"$(SIM_RESULTS_DIR)/\" " >> $(SIM_RUN_DIR)/test_define.v; \
                echo ; \
                echo "\t#### Beginning simulation ####"; \
                time -p ncverilog -f $(SIM_RUN_DIR)/$(ICARUS_COMMAND_FILE).generated $(RTL_SIM_FLAGS); \
                TEST_RESULT=`tail -n 1 $(SIM_RESULTS_DIR)/$$TEST-general.log | grep $(SIM_SUCCESS_MESSAGE) -c`; \
                echo; echo "\t####"; \
                if [ $$TEST_RESULT -gt 0 ]; then \
                        echo "\t#### Test $$TEST PASSED ####";\
                else    echo "\t#### Test $$TEST FAILED ####";\
                fi; \
                echo "\t####"; echo; \
        done




#ps aux | grep "xterm -e $(SIM_BIN_DIR)/monitor.sh $(SIM_RESULTS_DIR)/$$TEST-executed.log" | awk '{ print $2 }' | xargs kill; \

#               if [ ! -z $OR1K_MONITOR ]; then \
                        if [ ! -z $DISPLAY ]; then \
                                $(SIM_BIN_DIR)/monitor.sh $(SIM_RESULTS_DIR)/$$TEST-executed.log; \
                        fi; \
                fi; \


clean-sw:
        @for TEST in $(TESTS); do \
                echo "Current test: $$TEST"; \
                CURRENT_TEST_SW_DIR=$(SW_DIR)/`echo $$TEST | cut -d "-" -f 1`; \
                echo "Current test sw directory: " $$CURRENT_TEST_SW_DIR; \
                $(MAKE) -C $$CURRENT_TEST_SW_DIR clean; \
        done
        $(MAKE) -C $(SW_DIR)/support clean
        $(MAKE) -C $(SW_DIR)/utils clean

clean-sim:
        rm -rf $(SIM_RESULTS_DIR) $(SIM_RUN_DIR)/*.*