Subversion Repositories theia_gpu

`timescale 1ns / 1ps
`include "aDefinitions.v"
/**********************************************************************************
Theia, Ray Cast Programable graphic Processing Unit.
Copyright (C) 2010  Diego Valverde (diego.valverde.g@gmail.com)
 
This program is free software; you can redistribute it and/or
modify it under the terms of the GNU General Public License
as published by the Free Software Foundation; either version 2
of the License, or (at your option) any later version.
 
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
GNU General Public License for more details.
 
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
 
***********************************************************************************/
//--------------------------------------------------------
//Dual port RAM.
 
 
module RAM_DUAL_READ_PORT # ( parameter DATA_WIDTH=`DATA_ROW_WIDTH, parameter ADDR_WIDTH=`DATA_ADDRESS_WIDTH )
(
 input wire                    Clock,
 input wire                    iWriteEnable,
 input wire[ADDR_WIDTH-1:0]    iReadAddress0,
 input wire[ADDR_WIDTH-1:0]    iReadAddress1,
 input wire[ADDR_WIDTH-1:0]    iWriteAddress,
 input wire[DATA_WIDTH-1:0]    iDataIn,
 output reg [DATA_WIDTH-1:0]   oDataOut0,
 output reg [DATA_WIDTH-1:0]   oDataOut1
);
 
parameter DEPTH = 2**ADDR_WIDTH; 
reg [DATA_WIDTH-1:0] Ram [DEPTH-1:0];  
 
 
always @(posedge Clock) 
begin 
 
  /* verilator lint_off WIDTH */
  if (iWriteEnable) 
   Ram[iWriteAddress] <= iDataIn; 
 
 
   oDataOut0 <= Ram[iReadAddress0]; 
   oDataOut1 <= Ram[iReadAddress1]; 
    /* verilator lint_on WIDTH */
 
end 
endmodule
//--------------------------------------------------------
 
module RAM_SINGLE_READ_PORT # ( parameter DATA_WIDTH=`DATA_ROW_WIDTH, parameter ADDR_WIDTH=`DATA_ADDRESS_WIDTH, parameter MEM_SIZE=128 )
(
 input wire      Clock,
 input wire      iWriteEnable,
 input wire[ADDR_WIDTH-1:0] iReadAddress0,
 input wire[ADDR_WIDTH-1:0] iWriteAddress,
 input wire[DATA_WIDTH-1:0]    iDataIn,
 output reg [DATA_WIDTH-1:0]   oDataOut0
 
);
 
reg [DATA_WIDTH -1:0] Ram [MEM_SIZE-1:0];  
 
always @(posedge Clock) 
begin 
 
  if (iWriteEnable) 
   Ram[iWriteAddress] <= iDataIn; 
 
 
   oDataOut0 <= Ram[iReadAddress0]; 
 
 
end 
endmodule