URL
https://opencores.org/ocsvn/thor/thor/trunk
Subversion Repositories thor
[/] [thor/] [trunk/] [bench/] [Ps2Keyboard_sim.v] - Rev 27
Go to most recent revision | Compare with Previous | Blame | View Log
`timescale 1ns / 1ps // ============================================================================ // Ps2Keyboard.v - PS2 compatible keyboard interface // // 2015 Robert Finch // robfinch<remove>@finitron.ca // // // This source file is free software: you can redistribute it and/or modify // it under the terms of the GNU Lesser General Public License as published // by the Free Software Foundation, either version 3 of the License, or // (at your option) any later version. // // This source file is distributed in the hope that it will be useful, // but WITHOUT ANY WARRANTY; without even the implied warranty of // MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the // GNU General Public License for more details. // // You should have received a copy of the GNU General Public License // along with this program. If not, see <http://www.gnu.org/licenses/>. // // Reg // 0 keyboard transmit/receive register // 1 status reg. itk xxxx p // i = interrupt status // t = transmit complete // k = transmit acknowledge receipt (from keyboard) // p = parity error // A write to the status register clears the transmitter // state // // ============================================================================ // module Ps2Keyboard_sim(rst_i, clk_i, cyc_i, stb_i, ack_o, we_i, adr_i, dat_i, dat_o, kclk, kd, irq_o); parameter pIOAddress = 32'hFFDC0000; parameter pAckStyle = 1'b0; input rst_i; input clk_i; input cyc_i; input stb_i; output ack_o; input we_i; input [31:0] adr_i; input [7:0] dat_i; output reg [7:0] dat_o; inout tri kclk; inout tri kd; output irq_o; reg rd; wire write_data; wire cs_kbd = cyc_i & stb_i && adr_i[31:4]==pIOAddress[31:4]; assign ack_o = cs_kbd; assign irq_o = rd; reg read_data; reg busy; reg err; reg [7:0] rx_data; reg [19:0] cnt; always @(posedge clk_i) if (rst_i) cnt <= 20'd0; else cnt <= cnt + 1; always @(posedge clk_i) if (rst_i) begin read_data <= 1'b0; rx_data <= 8'h00; busy <= 1'b0; err <= 1'b0; end else begin read_data <= 0; case(cnt) 300: begin read_data <= 1'b1; rx_data <= 8'h41; end 350: begin read_data <= 1'b1; rx_data <= 8'h42; end 400: begin read_data <= 1'b1; rx_data <= 8'h43; end endcase end always @(posedge clk_i) if (rst_i) rd <= 1'b0; else begin if (read_data) rd <= 1'b1; else if (cs_kbd & ~we_i) rd <= 1'b0; end always @* if (cs_kbd & ~we_i) begin if (adr_i[0]) dat_o <= {rd,busy,5'b0,err}; else dat_o <= rx_data; end else dat_o <= 8'h00; assign write_data = cs_kbd & we_i & ~adr_i[0]; endmodule
Go to most recent revision | Compare with Previous | Blame | View Log