URL
https://opencores.org/ocsvn/thor/thor/trunk
Subversion Repositories thor
[/] [thor/] [trunk/] [rtl/] [verilog/] [Thor.v] - Rev 37
Go to most recent revision | Compare with Previous | Blame | View Log
// // COPYRIGHT 2000 by Bruce L. Jacob // (contact info: http://www.ece.umd.edu/~blj/) // // You are welcome to use, modify, copy, and/or redistribute this implementation, provided: // 1. you share with the author (Bruce Jacob) any changes you make; // 2. you properly credit the author (Bruce Jacob) if used within a larger work; and // 3. you do not modify, delete, or in any way obscure the implementation's copyright // notice or following comments (i.e. the first 3-4 dozen lines of this file). // // RiSC-16 // // This is an out-of-order implementation of the RiSC-16, a teaching instruction-set used by // the author at the University of Maryland, and which is a blatant (but sanctioned) rip-off // of the Little Computer (LC-896) developed by Peter Chen at the University of Michigan. // The primary differences include the following: // 1. a move from 17-bit to 16-bit instructions; and // 2. the replacement of the NOP and HALT opcodes by ADDI and LUI ... HALT and NOP are // now simply special instances of other instructions: NOP is a do-nothing ADD, and // HALT is a subset of JALR. // // RiSC stands for Ridiculously Simple Computer, which makes sense in the context in which // the instruction-set is normally used -- to teach simple organization and architecture to // undergraduates who do not yet know how computers work. This implementation was targetted // towards more advanced undergraduates doing design & implementation and was intended to // demonstrate some high-performance concepts on a small scale -- an 8-entry reorder buffer, // eight opcodes, two ALUs, two-way issue, two-way commit, etc. However, the out-of-order // core is much more complex than I anticipated, and I hope that its complexity does not // obscure its underlying structure. We'll see how well it flies in class ... // // CAVEAT FREELOADER: This Verilog implementation was developed and debugged in a (somewhat // frantic) 2-week period before the start of the Fall 2000 semester. Not surprisingly, it // still contains many bugs and some horrible, horrible logic. The logic is also written so // as to be debuggable and/or explain its function, rather than to be efficient -- e.g. in // several places, signals are over-constrained so that they are easy to read in the debug // output ... also, you will see statements like // // if (xyz[`INSTRUCTION_OP] == `BEQ || xyz[`INSTRUCTION_OP] == `SW) // // instead of and/nand combinations of bits ... sorry; can't be helped. Use at your own risk. // // DOCUMENTATION: Documents describing the RiSC-16 in all its forms (sequential, pipelined, // as well as out-of-order) can be found on the author's website at the following URL: // // http://www.ece.umd.edu/~blj/RiSC/ // // If you do not find what you are looking for, please feel free to email me with suggestions // for more/different/modified documents. Same goes for bug fixes. // // // KNOWN PROBLEMS (i.e., bugs I haven't got around to fixing yet) // // - If the target of a backwards branch is a backwards branch, the fetchbuf steering logic // will get confused. This can be fixed by having a separate did_branchback status register // for each of the fetch buffers. // // ============================================================================ // __ // \\__/ o\ (C) 2013-2016 Robert Finch, Stratford // \ __ / All rights reserved. // \/_// robfinch<remove>@finitron.ca // || // // This source file is free software: you can redistribute it and/or modify // it under the terms of the GNU Lesser General Public License as published // by the Free Software Foundation, either version 3 of the License, or // (at your option) any later version. // // This source file is distributed in the hope that it will be useful, // but WITHOUT ANY WARRANTY; without even the implied warranty of // MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the // GNU General Public License for more details. // // You should have received a copy of the GNU General Public License // along with this program. If not, see <http://www.gnu.org/licenses/>. // // // Thor Superscaler // // This work is starting with the RiSC-16 as noted in the copyright statement // above. Hopefully it will be possible to run this processor in real hardware // (FPGA) as opposed to just simulation. To the RiSC-16 are added: // // 64/32 bit datapath rather than 16 bit // 64 general purpose registers // 16 code address registers // 16 predicate registers / predicated instruction execution // 8 segment registers // A branch history table, and a (2,2) correlating branch predictor added // variable length instruction encodings (code density) // support for interrupts // The instruction set is changed completely with many new instructions. // An instruction and data cache were added. // A WISHBONE bus interface was added, // // 53,950 (86,500 LC's) // with segmentation // no bitfield, stack or FP ops // // ============================================================================ // `include "Thor_defines.v" module Thor(corenum, rst_i, clk_i, clk_o, km, nmi_i, irq_i, vec_i, bte_o, cti_o, bl_o, lock_o, resv_o, resv_i, cres_o, cyc_o, stb_o, ack_i, err_i, we_o, sel_o, adr_o, dat_i, dat_o); parameter DBW = 32; // databus width parameter ABW = 32; // address bus width parameter RSTCSEG = 52'h0; parameter RSTPC = 64'hFFFFFFFFFFFC0000; parameter STARTUP_POWER = 16'hFFFF; parameter IMCD = 6'h30; localparam AMSB = ABW-1; parameter QENTRIES = 8; parameter ALU1BIG = 0; parameter RESET1 = 4'd0; parameter RESET2 = 4'd1; parameter IDLE = 4'd2; parameter ICACHE1 = 4'd3; parameter DCACHE1 = 4'd4; parameter IBUF1 = 4'd5; parameter IBUF2 = 4'd6; parameter IBUF3 = 4'd7; parameter IBUF4 = 4'd8; parameter IBUF5 = 4'd9; parameter NREGS = 127; parameter PF = 4'd0; parameter PT = 4'd1; parameter PEQ = 4'd2; parameter PNE = 4'd3; parameter PLE = 4'd4; parameter PGT = 4'd5; parameter PGE = 4'd6; parameter PLT = 4'd7; parameter PLEU = 4'd8; parameter PGTU = 4'd9; parameter PGEU = 4'd10; parameter PLTU = 4'd11; input [63:0] corenum; input rst_i; input clk_i; output clk_o; output km; input nmi_i; input irq_i; input [7:0] vec_i; output reg [1:0] bte_o; output reg [2:0] cti_o; output reg [4:0] bl_o; output reg lock_o; output reg resv_o; input resv_i; output reg cres_o; output reg cyc_o; output reg stb_o; input ack_i; input err_i; output reg we_o; output reg [DBW/8-1:0] sel_o; output reg [ABW-1:0] adr_o; input [DBW-1:0] dat_i; output reg [DBW-1:0] dat_o; integer n,i; reg [1:0] mode; reg [DBW/8-1:0] rsel; reg [3:0] cstate; reg [ABW:0] pc; // program counter (virtual) wire [ABW-1:0] ppc; // physical pc address reg [ABW-1:0] interrupt_pc; // working register for interrupt pc reg [DBW-1:0] vadr; // data virtual address reg [3:0] panic; // indexes the message structure reg [128:0] message [0:15]; // indexed by panic reg [DBW-1:0] cregs [0:15]; // code address registers reg [ 3:0] pregs [0:15]; // predicate registers `ifdef SEGMENTATION reg [DBW-1:12] sregs [0:7]; // segment registers reg [DBW-1:12] sregs_lmt [0:7]; `endif reg [2:0] rrmapno; // register rename map number wire ITLBMiss; wire DTLBMiss; wire uncached; wire [DBW-1:0] cdat; reg pwe; wire [DBW-1:0] pea; reg [DBW-1:0] tick; reg [DBW-1:0] lc; // loop counter reg [DBW-1:0] rfoa0,rfoa1; reg [DBW-1:0] rfob0,rfob1; reg [DBW-1:0] rfoc0,rfoc1; reg [DBW-1:0] rfot0,rfot1; reg ic_invalidate,dc_invalidate; reg ic_invalidate_line,dc_invalidate_line; reg [ABW-1:0] ic_lineno,dc_lineno; reg ierr,derr; // err_i during icache load wire insnerr; // err_i during icache load wire [127:0] insn; wire iuncached; reg [NREGS:0] rf_v; //reg [15:0] pf_v; reg im,imb; reg [5:0] imcd; reg fxe; reg nmi1,nmi_edge; reg StatusHWI; reg StatusDBG; reg [7:0] StatusEXL; assign km = StatusHWI | |StatusEXL; reg [7:0] GM; // register group mask reg [7:0] GMB; wire [63:0] sr = {32'd0,imb,7'b0,GMB,im,1'b0,km,fxe,4'b0,GM}; wire int_commit; wire int_pending; wire sys_commit; wire dbg_commit; `ifdef SEGMENTATION wire [DBW-1:0] spc = (pc[ABW]==1'b1) ? pc[ABW-1:0] : (pc[ABW-1:ABW-4]==4'hF) ? pc[ABW-1:0] : {sregs[3'd7],12'h000} + pc[ABW-1:0]; `else wire [DBW-1:0] spc = pc; `endif wire [DBW-1:0] ppcp16 = ppc + 64'd16; reg [DBW-1:0] string_pc; reg stmv_flag; reg [7:0] asid; wire clk; // Operand registers wire take_branch; wire take_branch0; wire take_branch1; reg [3:0] rf_source [0:NREGS]; //reg [3:0] pf_source [15:0]; // instruction queue (ROB) reg [7:0] iqentry_v; // entry valid? -- this should be the first bit reg iqentry_out [0:7]; // instruction has been issued to an ALU ... reg iqentry_done [0:7]; // instruction result valid reg [7:0] iqentry_cmt; // commit result to machine state reg iqentry_bt [0:7]; // branch-taken (used only for branches) reg iqentry_br [0:7]; // branch instruction decode reg iqentry_agen [0:7]; // memory address is generated reg iqentry_mem [0:7]; // touches memory: 1 if LW/SW reg iqentry_ndx [0:7]; // TRUE if indexed memory op reg iqentry_cas [0:7]; reg iqentry_pushpop [0:7]; reg iqentry_pea [0:7]; reg iqentry_cmpmv [0:7]; reg iqentry_lla [0:7]; // load linear address reg iqentry_tlb [0:7]; reg iqentry_jmp [0:7]; // changes control flow: 1 if BEQ/JALR reg iqentry_jmpi [0:7]; reg iqentry_sync [0:7]; // sync instruction reg iqentry_memsb[0:7]; reg iqentry_memdb[0:7]; reg iqentry_fp [0:7]; // is an floating point operation reg iqentry_rfw [0:7]; // writes to register file reg [DBW-1:0] iqentry_res [0:7]; // instruction result reg [3:0] iqentry_insnsz [0:7]; // the size of the instruction reg [3:0] iqentry_cond [0:7]; // predicating condition reg [3:0] iqentry_preg [0:7]; // predicate regno reg [3:0] iqentry_pred [0:7]; // predicate value reg iqentry_p_v [0:7]; // predicate is valid reg [3:0] iqentry_p_s [0:7]; // predicate source reg [7:0] iqentry_op [0:7]; // instruction opcode reg [5:0] iqentry_fn [0:7]; // instruction function reg [2:0] iqentry_renmapno [0:7]; // register rename map number reg [6:0] iqentry_tgt [0:7]; // Rt field or ZERO -- this is the instruction's target (if any) reg [DBW-1:0] iqentry_a0 [0:7]; // argument 0 (immediate) reg [DBW-1:0] iqentry_a1 [0:7]; // argument 1 reg [6:0] iqentry_r1 [0:7]; reg iqentry_a1_v [0:7]; // arg1 valid reg [3:0] iqentry_a1_s [0:7]; // arg1 source (iq entry # with top bit representing ALU/DRAM bus) reg [6:0] iqentry_r2 [0:7]; reg [DBW-1:0] iqentry_a2 [0:7]; // argument 2 reg iqentry_a2_v [0:7]; // arg2 valid reg [3:0] iqentry_a2_s [0:7]; // arg2 source (iq entry # with top bit representing ALU/DRAM bus) reg [6:0] iqentry_r3 [0:7]; reg [DBW-1:0] iqentry_a3 [0:7]; // argument 3 reg iqentry_a3_v [0:7]; // arg3 valid reg [3:0] iqentry_a3_s [0:7]; // arg3 source (iq entry # with top bit representing ALU/DRAM bus) reg [6:0] iqentry_rt [0:7]; reg [DBW-1:0] iqentry_T [0:7]; reg iqentry_T_v [0:7]; reg [3:0] iqentry_T_s [0:7]; reg [DBW-1:0] iqentry_pc [0:7]; // program counter for this instruction reg [7:0] iqentry_source; wire iqentry_imm [0:7]; wire iqentry_memready [0:7]; wire iqentry_memopsvalid [0:7]; reg qstomp; wire stomp_all; reg [7:0] iqentry_fpissue; reg [7:0] iqentry_memissue; wire iqentry_memissue_head0; wire iqentry_memissue_head1; wire iqentry_memissue_head2; wire iqentry_memissue_head3; wire iqentry_memissue_head4; wire iqentry_memissue_head5; wire iqentry_memissue_head6; wire iqentry_memissue_head7; wire [7:0] iqentry_stomp; reg [7:0] iqentry_issue; wire [1:0] iqentry_0_islot; wire [1:0] iqentry_1_islot; wire [1:0] iqentry_2_islot; wire [1:0] iqentry_3_islot; wire [1:0] iqentry_4_islot; wire [1:0] iqentry_5_islot; wire [1:0] iqentry_6_islot; wire [1:0] iqentry_7_islot; reg [1:0] iqentry_islot[0:7]; reg [1:0] iqentry_fpislot[0:7]; reg queued1,queued2; reg queued3; // for three-way config reg allowq; wire [NREGS:1] livetarget; wire [NREGS:1] iqentry_0_livetarget; wire [NREGS:1] iqentry_1_livetarget; wire [NREGS:1] iqentry_2_livetarget; wire [NREGS:1] iqentry_3_livetarget; wire [NREGS:1] iqentry_4_livetarget; wire [NREGS:1] iqentry_5_livetarget; wire [NREGS:1] iqentry_6_livetarget; wire [NREGS:1] iqentry_7_livetarget; wire [NREGS:1] iqentry_0_latestID; wire [NREGS:1] iqentry_1_latestID; wire [NREGS:1] iqentry_2_latestID; wire [NREGS:1] iqentry_3_latestID; wire [NREGS:1] iqentry_4_latestID; wire [NREGS:1] iqentry_5_latestID; wire [NREGS:1] iqentry_6_latestID; wire [NREGS:1] iqentry_7_latestID; wire [NREGS:1] iqentry_0_cumulative; wire [NREGS:1] iqentry_1_cumulative; wire [NREGS:1] iqentry_2_cumulative; wire [NREGS:1] iqentry_3_cumulative; wire [NREGS:1] iqentry_4_cumulative; wire [NREGS:1] iqentry_5_cumulative; wire [NREGS:1] iqentry_6_cumulative; wire [NREGS:1] iqentry_7_cumulative; reg [2:0] tail0; reg [2:0] tail1; reg [2:0] tail2; // used only for three-way config reg [2:0] head0; reg [2:0] head1; reg [2:0] head2; // used only to determine memory-access ordering reg [2:0] head3; // used only to determine memory-access ordering reg [2:0] head4; // used only to determine memory-access ordering reg [2:0] head5; // used only to determine memory-access ordering reg [2:0] head6; // used only to determine memory-access ordering reg [2:0] head7; // used only to determine memory-access ordering reg [2:0] headinc; wire [2:0] missid; reg fetchbuf; // determines which pair to read from & write to reg [63:0] fetchbuf0_instr; reg [DBW-1:0] fetchbuf0_pc; reg fetchbuf0_v; wire fetchbuf0_mem; wire fetchbuf0_jmp; wire fetchbuf0_fp; wire fetchbuf0_rfw; wire fetchbuf0_pfw; reg [63:0] fetchbuf1_instr; reg [DBW-1:0] fetchbuf1_pc; reg fetchbuf1_v; wire fetchbuf1_mem; wire fetchbuf1_jmp; wire fetchbuf1_fp; wire fetchbuf1_rfw; wire fetchbuf1_pfw; wire fetchbuf1_bfw; reg [63:0] fetchbuf2_instr; reg [DBW-1:0] fetchbuf2_pc; reg fetchbuf2_v; wire fetchbuf2_mem; wire fetchbuf2_jmp; wire fetchbuf2_fp; wire fetchbuf2_rfw; wire fetchbuf2_pfw; wire fetchbuf2_bfw; reg [63:0] fetchbufA_instr; reg [DBW-1:0] fetchbufA_pc; reg fetchbufA_v; reg [63:0] fetchbufB_instr; reg [DBW-1:0] fetchbufB_pc; reg fetchbufB_v; reg [63:0] fetchbufC_instr; reg [DBW-1:0] fetchbufC_pc; reg fetchbufC_v; reg [63:0] fetchbufD_instr; reg [DBW-1:0] fetchbufD_pc; reg fetchbufD_v; reg did_branchback; reg did_branchback0; reg did_branchback1; reg alu0_ld; reg alu0_available; reg alu0_dataready; reg [3:0] alu0_sourceid; reg [3:0] alu0_insnsz; reg [7:0] alu0_op; reg [5:0] alu0_fn; reg [3:0] alu0_cond; reg alu0_bt; reg alu0_cmt; reg [DBW-1:0] alu0_argA; reg [DBW-1:0] alu0_argB; reg [DBW-1:0] alu0_argC; reg [DBW-1:0] alu0_argT; reg [DBW-1:0] alu0_argI; reg [3:0] alu0_pred; reg [DBW-1:0] alu0_pc; reg [DBW-1:0] alu0_bus; reg [3:0] alu0_id; wire [3:0] alu0_exc; reg alu0_v; wire alu0_branchmiss; reg [ABW:0] alu0_misspc; reg alu1_ld; reg alu1_available; reg alu1_dataready; reg [3:0] alu1_sourceid; reg [3:0] alu1_insnsz; reg [7:0] alu1_op; reg [5:0] alu1_fn; reg [3:0] alu1_cond; reg alu1_bt; reg alu1_cmt; reg [DBW-1:0] alu1_argA; reg [DBW-1:0] alu1_argB; reg [DBW-1:0] alu1_argC; reg [DBW-1:0] alu1_argT; reg [DBW-1:0] alu1_argI; reg [3:0] alu1_pred; reg [DBW-1:0] alu1_pc; reg [DBW-1:0] alu1_bus; reg [3:0] alu1_id; wire [3:0] alu1_exc; reg alu1_v; wire alu1_branchmiss; reg [ABW:0] alu1_misspc; wire jmpi_miss; reg [ABW-1:0] jmpi_misspc; wire mem_stringmissx; reg mem_stringmiss; wire branchmiss; wire [ABW:0] misspc; `ifdef FLOATING_POINT reg fp0_ld; reg fp0_available; reg fp0_dataready; reg [3:0] fp0_sourceid; reg [7:0] fp0_op; reg [5:0] fp0_fn; reg [3:0] fp0_cond; wire fp0_cmt; reg fp0_done; reg [DBW-1:0] fp0_argA; reg [DBW-1:0] fp0_argB; reg [DBW-1:0] fp0_argC; reg [DBW-1:0] fp0_argI; reg [3:0] fp0_pred; reg [DBW-1:0] fp0_pc; wire [DBW-1:0] fp0_bus; wire [3:0] fp0_id; wire [7:0] fp0_exc; wire fp0_v; `endif wire dram_avail; reg [2:0] dram0; // state of the DRAM request (latency = 4; can have three in pipeline) reg [2:0] dram1; // state of the DRAM request (latency = 4; can have three in pipeline) reg [2:0] dram2; // state of the DRAM request (latency = 4; can have three in pipeline) reg [2:0] tlb_state; reg [3:0] tlb_id; reg [3:0] tlb_op; reg [3:0] tlb_regno; reg [8:0] tlb_tgt; reg [DBW-1:0] tlb_data; wire [DBW-1:0] tlb_dato; reg dram0_owns_bus; reg [DBW-1:0] dram0_data; reg [DBW-1:0] dram0_datacmp; reg [DBW-1:0] dram0_addr; reg [DBW-1:0] dram0_seg; // value of segment register associated with memory operation reg [ABW-1:12] dram0_lmt; // value of segment limit associated with memory operation reg [7:0] dram0_op; reg [5:0] dram0_fn; reg [8:0] dram0_tgt; reg [3:0] dram0_id; reg [3:0] dram0_exc; reg [ABW-1:0] dram0_misspc; reg dram1_owns_bus; reg [DBW-1:0] dram1_data; reg [DBW-1:0] dram1_datacmp; reg [DBW-1:0] dram1_addr; reg [7:0] dram1_op; reg [5:0] dram1_fn; reg [6:0] dram1_tgt; reg [3:0] dram1_id; reg [3:0] dram1_exc; reg [DBW-1:0] dram2_data; reg [DBW-1:0] dram2_datacmp; reg [DBW-1:0] dram2_addr; reg [7:0] dram2_op; reg [5:0] dram2_fn; reg [6:0] dram2_tgt; reg [3:0] dram2_id; reg [3:0] dram2_exc; reg [DBW-1:0] dram_bus; reg [6:0] dram_tgt; reg [3:0] dram_id; reg [3:0] dram_exc; reg dram_v; reg [DBW-1:0] index; reg [DBW-1:0] src_addr,dst_addr; wire mem_issue; wire outstanding_stores; reg [DBW-1:0] I; // instruction count wire commit0_v; wire [3:0] commit0_id; wire [6:0] commit0_tgt; wire [DBW-1:0] commit0_bus; wire commit1_v; wire [3:0] commit1_id; wire [6:0] commit1_tgt; wire [DBW-1:0] commit1_bus; wire limit_cmt; wire committing2; wire [63:0] alu0_divq; wire [63:0] alu0_rem; wire alu0_div_done; wire [63:0] alu1_divq; wire [63:0] alu1_rem; wire alu1_div_done; wire [127:0] alu0_prod; wire alu0_mult_done; wire [127:0] alu1_prod; wire alu1_mult_done; reg exception_set; //----------------------------------------------------------------------------- // Debug //----------------------------------------------------------------------------- wire [DBW-1:0] dbg_stat1x; reg [DBW-1:0] dbg_stat; reg [DBW-1:0] dbg_ctrl; reg [ABW-1:0] dbg_adr0; reg [ABW-1:0] dbg_adr1; reg [ABW-1:0] dbg_adr2; reg [ABW-1:0] dbg_adr3; reg dbg_imatchA0,dbg_imatchA1,dbg_imatchA2,dbg_imatchA3,dbg_imatchA; reg dbg_imatchB0,dbg_imatchB1,dbg_imatchB2,dbg_imatchB3,dbg_imatchB; wire dbg_lmatch0 = dbg_ctrl[0] && dbg_ctrl[17:16]==2'b11 && dram0_addr[AMSB:3]==dbg_adr0[AMSB:3] && ((dbg_ctrl[19:18]==2'b00 && dram0_addr[2:0]==dbg_adr0[2:0]) || (dbg_ctrl[19:18]==2'b01 && dram0_addr[2:1]==dbg_adr0[2:1]) || (dbg_ctrl[19:18]==2'b10 && dram0_addr[2]==dbg_adr0[2]) || dbg_ctrl[19:18]==2'b11) ; wire dbg_lmatch1 = dbg_ctrl[1] && dbg_ctrl[21:20]==2'b11 && dram0_addr[AMSB:3]==dbg_adr1[AMSB:3] && ((dbg_ctrl[23:22]==2'b00 && dram0_addr[2:0]==dbg_adr1[2:0]) || (dbg_ctrl[23:22]==2'b01 && dram0_addr[2:1]==dbg_adr1[2:1]) || (dbg_ctrl[23:22]==2'b10 && dram0_addr[2]==dbg_adr1[2]) || dbg_ctrl[23:22]==2'b11) ; wire dbg_lmatch2 = dbg_ctrl[2] && dbg_ctrl[25:24]==2'b11 && dram0_addr[AMSB:3]==dbg_adr2[AMSB:3] && ((dbg_ctrl[27:26]==2'b00 && dram0_addr[2:0]==dbg_adr2[2:0]) || (dbg_ctrl[27:26]==2'b01 && dram0_addr[2:1]==dbg_adr2[2:1]) || (dbg_ctrl[27:26]==2'b10 && dram0_addr[2]==dbg_adr2[2]) || dbg_ctrl[27:26]==2'b11) ; wire dbg_lmatch3 = dbg_ctrl[3] && dbg_ctrl[29:28]==2'b11 && dram0_addr[AMSB:3]==dbg_adr3[AMSB:3] && ((dbg_ctrl[31:30]==2'b00 && dram0_addr[2:0]==dbg_adr3[2:0]) || (dbg_ctrl[31:30]==2'b01 && dram0_addr[2:1]==dbg_adr3[2:1]) || (dbg_ctrl[31:30]==2'b10 && dram0_addr[2]==dbg_adr3[2]) || dbg_ctrl[31:30]==2'b11) ; wire dbg_lmatch = dbg_lmatch0|dbg_lmatch1|dbg_lmatch2|dbg_lmatch3; wire dbg_smatch0 = dbg_ctrl[0] && dbg_ctrl[17:16]==2'b11 && dram0_addr[AMSB:3]==dbg_adr0[AMSB:3] && ((dbg_ctrl[19:18]==2'b00 && dram0_addr[2:0]==dbg_adr0[2:0]) || (dbg_ctrl[19:18]==2'b01 && dram0_addr[2:1]==dbg_adr0[2:1]) || (dbg_ctrl[19:18]==2'b10 && dram0_addr[2]==dbg_adr0[2]) || dbg_ctrl[19:18]==2'b11) ; wire dbg_smatch1 = dbg_ctrl[1] && dbg_ctrl[21:20]==2'b11 && dram0_addr[AMSB:3]==dbg_adr1[AMSB:3] && ((dbg_ctrl[23:22]==2'b00 && dram0_addr[2:0]==dbg_adr1[2:0]) || (dbg_ctrl[23:22]==2'b01 && dram0_addr[2:1]==dbg_adr1[2:1]) || (dbg_ctrl[23:22]==2'b10 && dram0_addr[2]==dbg_adr1[2]) || dbg_ctrl[23:22]==2'b11) ; wire dbg_smatch2 = dbg_ctrl[2] && dbg_ctrl[25:24]==2'b11 && dram0_addr[AMSB:3]==dbg_adr2[AMSB:3] && ((dbg_ctrl[27:26]==2'b00 && dram0_addr[2:0]==dbg_adr2[2:0]) || (dbg_ctrl[27:26]==2'b01 && dram0_addr[2:1]==dbg_adr2[2:1]) || (dbg_ctrl[27:26]==2'b10 && dram0_addr[2]==dbg_adr2[2]) || dbg_ctrl[27:26]==2'b11) ; wire dbg_smatch3 = dbg_ctrl[3] && dbg_ctrl[29:28]==2'b11 && dram0_addr[AMSB:3]==dbg_adr3[AMSB:3] && ((dbg_ctrl[31:30]==2'b00 && dram0_addr[2:0]==dbg_adr3[2:0]) || (dbg_ctrl[31:30]==2'b01 && dram0_addr[2:1]==dbg_adr3[2:1]) || (dbg_ctrl[31:30]==2'b10 && dram0_addr[2]==dbg_adr3[2]) || dbg_ctrl[31:30]==2'b11) ; wire dbg_smatch = dbg_smatch0|dbg_smatch1|dbg_smatch2|dbg_smatch3; wire dbg_stat0 = dbg_imatchA0 | dbg_imatchB0 | dbg_lmatch0 | dbg_smatch0; wire dbg_stat1 = dbg_imatchA1 | dbg_imatchB1 | dbg_lmatch1 | dbg_smatch1; wire dbg_stat2 = dbg_imatchA2 | dbg_imatchB2 | dbg_lmatch2 | dbg_smatch2; wire dbg_stat3 = dbg_imatchA3 | dbg_imatchB3 | dbg_lmatch3 | dbg_smatch3; assign dbg_stat1x = {dbg_stat3,dbg_stat2,dbg_stat1,dbg_stat0}; wire debug_on = |dbg_ctrl[3:0]|dbg_ctrl[7]; reg [11:0] spr_bir; always @(StatusHWI or StatusDBG or StatusEXL) if (StatusHWI) mode = 2'd1; else if (StatusDBG) mode = 2'd3; else if (StatusEXL) mode = 2'd2; else mode = 2'd0; // // BRANCH-MISS LOGIC: livetarget // // livetarget implies that there is a not-to-be-stomped instruction that targets the register in question // therefore, if it is zero it implies the rf_v value should become VALID on a branchmiss // /* Thor_livetarget #(NREGS) ultgt1 ( iqentry_v, iqentry_stomp, iqentry_cmt, iqentry_tgt[0], iqentry_tgt[1], iqentry_tgt[2], iqentry_tgt[3], iqentry_tgt[4], iqentry_tgt[5], iqentry_tgt[6], iqentry_tgt[7], livetarget, iqentry_0_livetarget, iqentry_1_livetarget, iqentry_2_livetarget, iqentry_3_livetarget, iqentry_4_livetarget, iqentry_5_livetarget, iqentry_6_livetarget, iqentry_7_livetarget ); // // BRANCH-MISS LOGIC: latestID // // latestID is the instruction queue ID of the newest instruction (latest) that targets // a particular register. looks a lot like scheduling logic, but in reverse. // assign iqentry_0_latestID = ((missid == 3'd0)|| ((iqentry_0_livetarget & iqentry_1_cumulative) == {NREGS{1'b0}})) ? iqentry_0_livetarget : {NREGS{1'b0}}; assign iqentry_0_cumulative = (missid == 3'd0) ? iqentry_0_livetarget : iqentry_0_livetarget | iqentry_1_cumulative; assign iqentry_1_latestID = ((missid == 3'd1)|| ((iqentry_1_livetarget & iqentry_2_cumulative) == {NREGS{1'b0}})) ? iqentry_1_livetarget : {NREGS{1'b0}}; assign iqentry_1_cumulative = (missid == 3'd1) ? iqentry_1_livetarget : iqentry_1_livetarget | iqentry_2_cumulative; assign iqentry_2_latestID = ((missid == 3'd2) || ((iqentry_2_livetarget & iqentry_3_cumulative) == {NREGS{1'b0}})) ? iqentry_2_livetarget : {NREGS{1'b0}}; assign iqentry_2_cumulative = (missid == 3'd2) ? iqentry_2_livetarget : iqentry_2_livetarget | iqentry_3_cumulative; assign iqentry_3_latestID = ((missid == 3'd3)|| ((iqentry_3_livetarget & iqentry_4_cumulative) == {NREGS{1'b0}})) ? iqentry_3_livetarget : {NREGS{1'b0}}; assign iqentry_3_cumulative = (missid == 3'd3) ? iqentry_3_livetarget : iqentry_3_livetarget | iqentry_4_cumulative; assign iqentry_4_latestID = ((missid == 3'd4) || ((iqentry_4_livetarget & iqentry_5_cumulative) == {NREGS{1'b0}})) ? iqentry_4_livetarget : {NREGS{1'b0}}; assign iqentry_4_cumulative = (missid == 3'd4) ? iqentry_4_livetarget : iqentry_4_livetarget | iqentry_5_cumulative; assign iqentry_5_latestID = ((missid == 3'd5)|| ((iqentry_5_livetarget & iqentry_6_cumulative) == {NREGS{1'b0}})) ? iqentry_5_livetarget : 287'd0; assign iqentry_5_cumulative = (missid == 3'd5) ? iqentry_5_livetarget : iqentry_5_livetarget | iqentry_6_cumulative; assign iqentry_6_latestID = ((missid == 3'd6) || ((iqentry_6_livetarget & iqentry_7_cumulative) == {NREGS{1'b0}})) ? iqentry_6_livetarget : {NREGS{1'b0}}; assign iqentry_6_cumulative = (missid == 3'd6) ? iqentry_6_livetarget : iqentry_6_livetarget | iqentry_7_cumulative; assign iqentry_7_latestID = ((missid == 3'd7) || ((iqentry_7_livetarget & iqentry_0_cumulative) == {NREGS{1'b0}})) ? iqentry_7_livetarget : {NREGS{1'b0}}; assign iqentry_7_cumulative = (missid==3'd7) ? iqentry_7_livetarget : iqentry_7_livetarget | iqentry_0_cumulative; assign iqentry_source[0] = | iqentry_0_latestID, iqentry_source[1] = | iqentry_1_latestID, iqentry_source[2] = | iqentry_2_latestID, iqentry_source[3] = | iqentry_3_latestID, iqentry_source[4] = | iqentry_4_latestID, iqentry_source[5] = | iqentry_5_latestID, iqentry_source[6] = | iqentry_6_latestID, iqentry_source[7] = | iqentry_7_latestID; */ always @* begin iqentry_source = 8'h00; if (missid==head0) begin if (iqentry_v[head0] && !iqentry_stomp[head0]) iqentry_source[head0] = !fnRegIsAutoValid(iqentry_tgt[head0]); end else if (missid==head1) begin if (iqentry_v[head0] && !iqentry_stomp[head0]) iqentry_source[head0] = !fnRegIsAutoValid(iqentry_tgt[head0]); if (iqentry_v[head1] && !iqentry_stomp[head1]) iqentry_source[head1] = !fnRegIsAutoValid(iqentry_tgt[head1]); end else if (missid==head2) begin if (iqentry_v[head0] && !iqentry_stomp[head0]) iqentry_source[head0] = !fnRegIsAutoValid(iqentry_tgt[head0]); if (iqentry_v[head1] && !iqentry_stomp[head1]) iqentry_source[head1] = !fnRegIsAutoValid(iqentry_tgt[head1]); if (iqentry_v[head2] && !iqentry_stomp[head2]) iqentry_source[head2] = !fnRegIsAutoValid(iqentry_tgt[head2]); end else if (missid==head3) begin if (iqentry_v[head0] && !iqentry_stomp[head0]) iqentry_source[head0] = !fnRegIsAutoValid(iqentry_tgt[head0]); if (iqentry_v[head1] && !iqentry_stomp[head1]) iqentry_source[head1] = !fnRegIsAutoValid(iqentry_tgt[head1]); if (iqentry_v[head2] && !iqentry_stomp[head2]) iqentry_source[head2] = !fnRegIsAutoValid(iqentry_tgt[head2]); if (iqentry_v[head3] && !iqentry_stomp[head3]) iqentry_source[head3] = !fnRegIsAutoValid(iqentry_tgt[head3]); end else if (missid==head4) begin if (iqentry_v[head0] && !iqentry_stomp[head0]) iqentry_source[head0] = !fnRegIsAutoValid(iqentry_tgt[head0]); if (iqentry_v[head1] && !iqentry_stomp[head1]) iqentry_source[head1] = !fnRegIsAutoValid(iqentry_tgt[head1]); if (iqentry_v[head2] && !iqentry_stomp[head2]) iqentry_source[head2] = !fnRegIsAutoValid(iqentry_tgt[head2]); if (iqentry_v[head3] && !iqentry_stomp[head3]) iqentry_source[head3] = !fnRegIsAutoValid(iqentry_tgt[head3]); if (iqentry_v[head4] && !iqentry_stomp[head4]) iqentry_source[head4] = !fnRegIsAutoValid(iqentry_tgt[head4]); end else if (missid==head5) begin if (iqentry_v[head0] && !iqentry_stomp[head0]) iqentry_source[head0] = !fnRegIsAutoValid(iqentry_tgt[head0]); if (iqentry_v[head1] && !iqentry_stomp[head1]) iqentry_source[head1] = !fnRegIsAutoValid(iqentry_tgt[head1]); if (iqentry_v[head2] && !iqentry_stomp[head2]) iqentry_source[head2] = !fnRegIsAutoValid(iqentry_tgt[head2]); if (iqentry_v[head3] && !iqentry_stomp[head3]) iqentry_source[head3] = !fnRegIsAutoValid(iqentry_tgt[head3]); if (iqentry_v[head4] && !iqentry_stomp[head4]) iqentry_source[head4] = !fnRegIsAutoValid(iqentry_tgt[head4]); if (iqentry_v[head5] && !iqentry_stomp[head5]) iqentry_source[head5] = !fnRegIsAutoValid(iqentry_tgt[head5]); end else if (missid==head6) begin if (iqentry_v[head0] && !iqentry_stomp[head0]) iqentry_source[head0] = !fnRegIsAutoValid(iqentry_tgt[head0]); if (iqentry_v[head1] && !iqentry_stomp[head1]) iqentry_source[head1] = !fnRegIsAutoValid(iqentry_tgt[head1]); if (iqentry_v[head2] && !iqentry_stomp[head2]) iqentry_source[head2] = !fnRegIsAutoValid(iqentry_tgt[head2]); if (iqentry_v[head3] && !iqentry_stomp[head3]) iqentry_source[head3] = !fnRegIsAutoValid(iqentry_tgt[head3]); if (iqentry_v[head4] && !iqentry_stomp[head4]) iqentry_source[head4] = !fnRegIsAutoValid(iqentry_tgt[head4]); if (iqentry_v[head5] && !iqentry_stomp[head5]) iqentry_source[head5] = !fnRegIsAutoValid(iqentry_tgt[head5]); if (iqentry_v[head6] && !iqentry_stomp[head6]) iqentry_source[head6] = !fnRegIsAutoValid(iqentry_tgt[head6]); end else if (missid==head7) begin if (iqentry_v[head0] && !iqentry_stomp[head0]) iqentry_source[head0] = !fnRegIsAutoValid(iqentry_tgt[head0]); if (iqentry_v[head1] && !iqentry_stomp[head1]) iqentry_source[head1] = !fnRegIsAutoValid(iqentry_tgt[head1]); if (iqentry_v[head2] && !iqentry_stomp[head2]) iqentry_source[head2] = !fnRegIsAutoValid(iqentry_tgt[head2]); if (iqentry_v[head3] && !iqentry_stomp[head3]) iqentry_source[head3] = !fnRegIsAutoValid(iqentry_tgt[head3]); if (iqentry_v[head4] && !iqentry_stomp[head4]) iqentry_source[head4] = !fnRegIsAutoValid(iqentry_tgt[head4]); if (iqentry_v[head5] && !iqentry_stomp[head5]) iqentry_source[head5] = !fnRegIsAutoValid(iqentry_tgt[head5]); if (iqentry_v[head6] && !iqentry_stomp[head6]) iqentry_source[head6] = !fnRegIsAutoValid(iqentry_tgt[head6]); if (iqentry_v[head7] && !iqentry_stomp[head7]) iqentry_source[head7] = !fnRegIsAutoValid(iqentry_tgt[head7]); end end //assign iqentry_0_islot = iqentry_islot[0]; //assign iqentry_1_islot = iqentry_islot[1]; //assign iqentry_2_islot = iqentry_islot[2]; //assign iqentry_3_islot = iqentry_islot[3]; //assign iqentry_4_islot = iqentry_islot[4]; //assign iqentry_5_islot = iqentry_islot[5]; //assign iqentry_6_islot = iqentry_islot[6]; //assign iqentry_7_islot = iqentry_islot[7]; // A single instruction can require 3 read ports. Only a total of four read // ports are supported because most of the time that's enough. // If there aren't enough read ports available then the second instruction // isn't enqueued (it'll be enqueued in the next cycle). reg [1:0] ports_avail; // available read ports for instruction #3. reg [6:0] pRa0,pRb0,pRa1,pRb1,pRt0,pRt1; wire [DBW-1:0] prfoa0,prfob0,prfoa1,prfob1; wire [DBW-1:0] prfot0,prfot1; wire [6:0] Ra0 = fnRa(fetchbuf0_instr); wire [6:0] Rb0 = fnRb(fetchbuf0_instr); wire [6:0] Rc0 = fnRc(fetchbuf0_instr); wire [6:0] Ra1 = fnRa(fetchbuf1_instr); wire [6:0] Rb1 = fnRb(fetchbuf1_instr); wire [6:0] Rc1 = fnRc(fetchbuf1_instr); wire [6:0] Rt0 = fnTargetReg(fetchbuf0_instr); wire [6:0] Rt1 = fnTargetReg(fetchbuf1_instr); always @* begin pRt0 = Rt0; pRt1 = Rt1; rfot0 = prfot0; rfot1 = prfot1; case(fetchbuf0_v ? fnNumReadPorts(fetchbuf0_instr) : 2'd0) 2'd0: begin pRa0 = 7'd0; pRb0 = Rc1; pRa1 = Ra1; pRb1 = Rb1; rfoa0 = 64'd0; rfob0 = 64'd0; rfoc0 = 64'd0; rfoa1 = prfoa1; rfob1 = prfob1; rfoc1 = prfob0; ports_avail = 2'd3; end 2'd1: begin pRa0 = Ra0; pRb0 = Rc1; pRa1 = Ra1; pRb1 = Rb1; rfoa0 = prfoa0; rfob0 = 64'd0; rfoc0 = 64'd0; rfoa1 = prfoa1; rfob1 = prfob1; rfoc1 = prfob0; ports_avail = 2'd3; end 2'd2: begin pRa0 = Ra0; pRb0 = Rb0; pRa1 = Ra1; pRb1 = Rb1; rfoa0 = prfoa0; rfob0 = prfob0; rfoc0 = 64'd0; rfoa1 = prfoa1; rfob1 = prfob1; rfoc1 = 64'd0; ports_avail = 2'd2; end 2'd3: begin pRa0 = Ra0; pRb0 = Rb0; pRa1 = Rc0; pRb1 = Ra1; rfoa0 = prfoa0; rfob0 = prfob0; rfoc0 = prfoa1; rfoa1 = prfob1; rfob1 = 64'd0; rfoc1 = 64'd0; ports_avail = 2'd1; end endcase end /* wire [8:0] Rb0 = ((fnNumReadPorts(fetchbuf0_instr) < 3'd2) || !fetchbuf0_v) ? {1'b0,fetchbuf1_instr[`INSTRUCTION_RC]} : fnRb(fetchbuf0_instr); wire [8:0] Ra1 = (!fetchbuf0_v || fnNumReadPorts(fetchbuf0_instr) < 3'd3) ? fnRa(fetchbuf1_instr) : fetchbuf0_instr[`INSTRUCTION_RC]; wire [8:0] Rb1 = (fnNumReadPorts(fetchbuf1_instr) < 3'd2 && fetchbuf0_v) ? fnRa(fetchbuf1_instr):fnRb(fetchbuf1_instr); */ function [7:0] fnOpcode; input [63:0] ins; fnOpcode = (ins[3:0]==4'h0 && ins[7:4] > 4'h1 && ins[7:4] < 4'h9) ? `IMM : ins[7:0]==8'h10 ? `NOP : ins[15:8]; endfunction wire [7:0] opcode0 = fnOpcode(fetchbuf0_instr); wire [7:0] opcode1 = fnOpcode(fetchbuf1_instr); wire [3:0] cond0 = fetchbuf0_instr[3:0]; wire [3:0] cond1 = fetchbuf1_instr[3:0]; wire [3:0] Pn0 = fetchbuf0_instr[7:4]; wire [3:0] Pt0 = fetchbuf0_instr[11:8]; wire [3:0] Pn1 = fetchbuf1_instr[7:4]; wire [3:0] Pt1 = fetchbuf1_instr[11:8]; wire [6:0] r27 = 7'd27 + mode; function [6:0] fnRa; input [63:0] isn; case(isn[15:8]) `RTS2: fnRa = 7'h51; `RTI: fnRa = 7'h5E; `RTD: fnRa = 7'h5B; `RTE: fnRa = 7'h5D; `JSR,`JSRS,`JSRZ,`SYS,`INT,`RTS: fnRa = {3'h5,isn[23:20]}; `TLB: fnRa = {1'b0,isn[29:24]}; `P: fnRa = 7'h70; `LOOP: fnRa = 7'h73; `PUSH: fnRa = r27; `ifdef STACKOPS `PEA,`POP,`LINK: fnRa = r27; `endif `MFSPR,`MOVS: if (isn[`INSTRUCTION_RA]==`USP) fnRa = 7'd27; else fnRa = {1'b1,isn[`INSTRUCTION_RA]}; default: if (isn[`INSTRUCTION_RA]==6'd27) fnRa = r27; else fnRa = {1'b0,isn[`INSTRUCTION_RA]}; endcase endfunction function [6:0] fnRb; input [63:0] isn; case(isn[15:8]) // `LOOP: fnRb = 7'h73; // `RTS,`STP,`TLB,`POP: fnRb = 7'd0; `JSR,`JSRS,`JSRZ,`SYS,`INT: fnRb = {3'h5,isn[23:20]}; `SWS: if (isn[27:22]==`USP) fnRb = {1'b0,6'd27}; else fnRb = {1'b1,isn[27:22]}; `PUSH: fnRb = isn[22:16]; `ifdef STACKOPS `LINK: fnRb = {1'b0,isn[27:22]}; `PEA: fnRb = {1'b0,isn[21:16]}; `endif default: if (isn[`INSTRUCTION_RB]==6'd27) fnRb = r27; else fnRb = {1'b0,isn[`INSTRUCTION_RB]}; endcase endfunction function [6:0] fnRc; input [63:0] isn; if (isn[`INSTRUCTION_RC]==6'd27) fnRc = r27; else fnRc = {1'b0,isn[`INSTRUCTION_RC]}; endfunction function [3:0] fnCar; input [63:0] isn; case(isn[15:8]) `RTS2: fnCar = 4'h1; `RTI: fnCar = 4'hE; `RTD: fnCar = 4'hB; `RTE: fnCar = 4'hD; `JSR,`JSRS,`JSRZ,`SYS,`INT,`RTS: fnCar = {isn[23:20]}; default: fnCar = 4'h0; endcase endfunction function [5:0] fnFunc; input [63:0] isn; case(isn[15:8]) `BITFIELD: fnFunc = isn[43:40]; `R: fnFunc = isn[31:28]; `R2: fnFunc = isn[31:28]; `DOUBLE_R: fnFunc = isn[31:28]; `SINGLE_R: fnFunc = isn[31:28]; 8'h10: fnFunc = isn[31:28]; 8'h11: fnFunc = isn[31:28]; 8'h12: fnFunc = isn[31:28]; 8'h13: fnFunc = isn[31:28]; 8'h14: fnFunc = isn[31:28]; 8'h15: fnFunc = isn[31:28]; 8'h16: fnFunc = isn[31:28]; 8'h17: fnFunc = isn[31:28]; 8'h18: fnFunc = isn[31:28]; 8'h19: fnFunc = isn[31:28]; 8'h1A: fnFunc = isn[31:28]; 8'h1B: fnFunc = isn[31:28]; 8'h1C: fnFunc = isn[31:28]; 8'h1D: fnFunc = isn[31:28]; 8'h1E: fnFunc = isn[31:28]; 8'h1F: fnFunc = isn[31:28]; 8'h00: fnFunc = isn[23:22]; 8'h01: fnFunc = isn[23:22]; 8'h02: fnFunc = isn[23:22]; 8'h03: fnFunc = isn[23:22]; 8'h04: fnFunc = isn[23:22]; 8'h05: fnFunc = isn[23:22]; 8'h06: fnFunc = isn[23:22]; 8'h07: fnFunc = isn[23:22]; 8'h08: fnFunc = isn[23:22]; 8'h09: fnFunc = isn[23:22]; 8'h0A: fnFunc = isn[23:22]; 8'h0B: fnFunc = isn[23:22]; 8'h0C: fnFunc = isn[23:22]; 8'h0D: fnFunc = isn[23:22]; 8'h0E: fnFunc = isn[23:22]; 8'h0F: fnFunc = isn[23:22]; `INC: fnFunc = {isn[39:37],isn[24:22]}; `TLB: fnFunc = isn[19:16]; `RTS: fnFunc = isn[19:16]; // used to pass a small immediate `CACHE: fnFunc = isn[31:26]; `PUSH,`PEA: fnFunc = km ? 6'b0 : 6'b110000; // select segment register #6 `JMPI: fnFunc = {isn[39:37],1'b0,isn[27:26]}; `JMPIX: fnFunc = {isn[39:37],1'b0,isn[33:32]}; default: fnFunc = isn[39:34]; endcase endfunction // Returns true if the operation is limited to ALU #0 function fnIsAlu0Op; input [7:0] opcode; input [5:0] func; case(opcode) `R: case(func) `CNTLZ,`CNTLO,`CNTPOP: fnIsAlu0Op = `TRUE; `ABS,`SGN,`ZXB,`ZXC,`ZXH,`SXB,`SXC,`SXH: fnIsAlu0Op = `TRUE; default: fnIsAlu0Op = `FALSE; endcase `R2: fnIsAlu0Op = `TRUE; `RR: case(func) `DIV,`DIVU: fnIsAlu0Op = `TRUE; `MOD,`MODU: fnIsAlu0Op = `TRUE; `MIN,`MAX: fnIsAlu0Op = `TRUE; default: fnIsAlu0Op = `FALSE; endcase `BCD: fnIsAlu0Op = `TRUE; `DIVI,`DIVUI: fnIsAlu0Op = `TRUE; `MODI,`MODUI: fnIsAlu0Op = `TRUE; //`DOUBLE: fnIsAlu0Op = `TRUE; `SHIFT: fnIsAlu0Op = `TRUE; `BITFIELD: fnIsAlu0Op = `TRUE; default: fnIsAlu0Op = `FALSE; endcase endfunction // Returns TRUE if the alu will be valid immediately // function fnAluValid; input [7:0] opcode; input [5:0] func; case(opcode) `R: fnAluValid = `TRUE; `RR: case(func) `MUL,`MULU,`DIV,`DIVU,`MOD,`MODU: fnAluValid = `FALSE; default: fnAluValid = `TRUE; endcase `MULI,`MULUI,`DIVI,`DIVUI,`MODI,`MODUI: fnAluValid = `FALSE; default: fnAluValid = `TRUE; endcase endfunction Thor_regfile2w6r #(DBW) urf1 ( .clk(clk), .rclk(~clk), .wr0(commit0_v && ~commit0_tgt[6]), .wr1(commit1_v && ~commit1_tgt[6]), .wa0(commit0_tgt[5:0]), .wa1(commit1_tgt[5:0]), .ra0(pRa0[5:0]), .ra1(pRb0[5:0]), .ra2(pRa1[5:0]), .ra3(pRb1[5:0]), .ra4(pRt0[5:0]), .ra5(pRt1[5:0]), .i0(commit0_bus), .i1(commit1_bus), .o0(prfoa0), .o1(prfob0), .o2(prfoa1), .o3(prfob1), .o4(prfot0), .o5(prfot1) ); wire [63:0] cregs0 = fnCar(fetchbuf0_instr)==4'd0 ? 64'd0 : fnCar(fetchbuf0_instr)==4'hF ? fetchbuf0_pc : cregs[fnCar(fetchbuf0_instr)]; wire [63:0] cregs1 = fnCar(fetchbuf1_instr)==4'd0 ? 64'd0 : fnCar(fetchbuf1_instr)==4'hF ? fetchbuf1_pc : cregs[fnCar(fetchbuf1_instr)]; // // 1 if the the operand is automatically valid, // 0 if we need a RF value function fnSource1_v; input [7:0] opcode; case(opcode) `SEI,`CLI,`MEMSB,`MEMDB,`SYNC,`NOP,`STP: fnSource1_v = 1'b1; `LDI,`LDIS,`IMM: fnSource1_v = 1'b1; default: case(opcode[7:4]) `BR: fnSource1_v = 1'b1; default: fnSource1_v = 1'b0; endcase endcase endfunction // // 1 if the the operand is automatically valid, // 0 if we need a RF value function fnSource2_v; input [7:0] opcode; input [5:0] func; case(opcode) `R,`P: fnSource2_v = 1'b1; `LDI,`LDIS,`IMM,`NOP,`STP: fnSource2_v = 1'b1; `SEI,`CLI,`MEMSB,`MEMDB,`SYNC: fnSource2_v = 1'b1; `RTI,`RTD,`RTE,`JMPI: fnSource2_v = 1'b1; // TST 8'h00: fnSource2_v = 1'b1; 8'h01: fnSource2_v = 1'b1; 8'h02: fnSource2_v = 1'b1; 8'h03: fnSource2_v = 1'b1; 8'h04: fnSource2_v = 1'b1; 8'h05: fnSource2_v = 1'b1; 8'h06: fnSource2_v = 1'b1; 8'h07: fnSource2_v = 1'b1; 8'h08: fnSource2_v = 1'b1; 8'h09: fnSource2_v = 1'b1; 8'h0A: fnSource2_v = 1'b1; 8'h0B: fnSource2_v = 1'b1; 8'h0C: fnSource2_v = 1'b1; 8'h0D: fnSource2_v = 1'b1; 8'h0E: fnSource2_v = 1'b1; 8'h0F: fnSource2_v = 1'b1; `ADDI,`ADDUI,`ADDUIS: fnSource2_v = 1'b1; `_2ADDUI,`_4ADDUI,`_8ADDUI,`_16ADDUI: fnSource2_v = 1'b1; `SUBI,`SUBUI: fnSource2_v = 1'b1; // CMPI 8'h20: fnSource2_v = 1'b1; 8'h21: fnSource2_v = 1'b1; 8'h22: fnSource2_v = 1'b1; 8'h23: fnSource2_v = 1'b1; 8'h24: fnSource2_v = 1'b1; 8'h25: fnSource2_v = 1'b1; 8'h26: fnSource2_v = 1'b1; 8'h27: fnSource2_v = 1'b1; 8'h28: fnSource2_v = 1'b1; 8'h29: fnSource2_v = 1'b1; 8'h2A: fnSource2_v = 1'b1; 8'h2B: fnSource2_v = 1'b1; 8'h2C: fnSource2_v = 1'b1; 8'h2D: fnSource2_v = 1'b1; 8'h2E: fnSource2_v = 1'b1; 8'h2F: fnSource2_v = 1'b1; // BR 8'h30: fnSource2_v = 1'b1; 8'h31: fnSource2_v = 1'b1; 8'h32: fnSource2_v = 1'b1; 8'h33: fnSource2_v = 1'b1; 8'h34: fnSource2_v = 1'b1; 8'h35: fnSource2_v = 1'b1; 8'h36: fnSource2_v = 1'b1; 8'h37: fnSource2_v = 1'b1; 8'h38: fnSource2_v = 1'b1; 8'h39: fnSource2_v = 1'b1; 8'h3A: fnSource2_v = 1'b1; 8'h3B: fnSource2_v = 1'b1; 8'h3C: fnSource2_v = 1'b1; 8'h3D: fnSource2_v = 1'b1; 8'h3E: fnSource2_v = 1'b1; 8'h3F: fnSource2_v = 1'b1; `MULI,`MULUI,`DIVI,`DIVUI,`MODI,`MODUI: fnSource2_v = 1'b1; `ANDI,`BITI: fnSource2_v = 1'b1; `ORI: fnSource2_v = 1'b1; `EORI: fnSource2_v = 1'b1; `SHIFT: if (func>=6'h10) fnSource2_v = `TRUE; else fnSource2_v = `FALSE; `CACHE,`LCL,`TLB,`LLA, `LVB,`LVC,`LVH,`LVW,`LVWAR, `LB,`LBU,`LC,`LCU,`LH,`LHU,`LW,`LWS,`STI,`INC: fnSource2_v = 1'b1; `JSR,`JSRS,`JSRZ,`SYS,`INT,`RTS,`RTS2: fnSource2_v = 1'b1; `MTSPR,`MFSPR,`POP,`UNLINK: fnSource2_v = 1'b1; `BITFIELD: if (func==`BFINS) fnSource2_v = 1'b0; else fnSource2_v = 1'b1; `LOOP: fnSource2_v = 1'b1; default: fnSource2_v = 1'b0; endcase endfunction // Source #3 valid // Since most instructions don't use a third source the default it to return // a valid status. // 1 if the the operand is automatically valid, // 0 if we need a RF value function fnSource3_v; input [7:0] opcode; input [5:0] func; case(opcode) `RR: case(func) `CHK: fnSource3_v = 1'b0; default: fnSource3_v = 1'b1; endcase `SBX,`SCX,`SHX,`SWX,`CAS,`STMV,`STCMP,`STFND: fnSource3_v = 1'b0; `MUX: fnSource3_v = 1'b0; default: fnSource3_v = 1'b1; endcase endfunction function fnSourceT_v; input [7:0] opcode; input [5:0] func; case(opcode) `RR: case(func) `CHK: fnSourceT_v = 1'b1; default: fnSourceT_v = 1'b0; endcase // BR 8'h30,8'h31,8'h32,8'h33, 8'h34,8'h35,8'h36,8'h37, 8'h38,8'h39,8'h3A,8'h3B, 8'h3C,8'h3D,8'h3E,8'h3F, `SB,`SC,`SH,`SW,`SBX,`SCX,`SHX,`SWX,`SWS, `CACHE,`CHKI, `SEI,`CLI,`NOP,`STP,`RTI,`RTD,`RTE, `MEMSB,`MEMDB,`SYNC: fnSourceT_v = 1'b1; default: fnSourceT_v = 1'b0; endcase endfunction // Return the number of register read ports required for an instruction. function [2:0] fnNumReadPorts; input [63:0] ins; case(fnOpcode(ins)) `SEI,`CLI,`MEMSB,`MEMDB,`SYNC,`NOP,`MOVS,`STP: fnNumReadPorts = 3'd0; `LDI,`LDIS,`IMM: fnNumReadPorts = 3'd0; `R,`P,`STI,`LOOP,`JMPI: fnNumReadPorts = 3'd1; `RTI,`RTD,`RTE: fnNumReadPorts = 3'd1; `ADDI,`ADDUI,`ADDUIS: fnNumReadPorts = 3'd1; `_2ADDUI,`_4ADDUI,`_8ADDUI,`_16ADDUI: fnNumReadPorts = 3'd1; `SUBI,`SUBUI: fnNumReadPorts = 3'd1; `MULI,`MULUI,`DIVI,`DIVUI,`MODI,`MODUI: fnNumReadPorts = 3'd1; `BITI, `ANDI,`ORI,`EORI: fnNumReadPorts = 3'd1; `SHIFT: if (ins[39:38]==2'h1) // shift immediate fnNumReadPorts = 3'd1; else fnNumReadPorts = 3'd2; `CACHE,`LCL,`TLB,`LLA, `LB,`LBU,`LC,`LCU,`LH,`LHU,`LW,`LVB,`LVC,`LVH,`LVW,`LVWAR,`LWS,`INC: fnNumReadPorts = 3'd1; `JSR,`JSRS,`JSRZ,`SYS,`INT,`RTS,`RTS2,`BR: fnNumReadPorts = 3'd1; `SBX,`SCX,`SHX,`SWX, `MUX,`CAS,`STMV,`STCMP: fnNumReadPorts = 3'd3; `MTSPR,`MFSPR,`POP,`UNLINK: fnNumReadPorts = 3'd1; `STFND: fnNumReadPorts = 3'd2; // *** TLB reads on Rb we say 2 for simplicity `RR: case(ins[39:34]) `CHK: fnNumReadPorts = 3'd3; default: fnNumReadPorts = 3'd2; endcase `BITFIELD: case(ins[43:40]) `BFSET,`BFCLR,`BFCHG,`BFEXT,`BFEXTU,`BFINSI: fnNumReadPorts = 3'd1; `BFINS: fnNumReadPorts = 3'd2; default: fnNumReadPorts = 3'd0; endcase default: case(ins[15:12]) `TST: fnNumReadPorts = 3'd1; `CMPI: fnNumReadPorts = 3'd1; `CMP: fnNumReadPorts = 3'd2; `BR: fnNumReadPorts = 3'd0; default: fnNumReadPorts = 3'd2; endcase endcase endfunction function fnIsBranch; input [7:0] opcode; case(opcode[7:4]) `BR: fnIsBranch = `TRUE; default: fnIsBranch = `FALSE; endcase endfunction function fnIsPush; input [63:0] isn; fnIsPush = isn[15:8]==`PUSH || isn[15:8]==`PEA; endfunction function fnIsPop; input [63:0] isn; fnIsPop = isn[15:8]==`POP; endfunction function fnIsStoreString; input [7:0] opcode; fnIsStoreString = opcode==`STS; endfunction reg [DBW-1:0] branch_pc; wire xbr = iqentry_br[head0] | iqentry_br[head1]; wire takb = iqentry_br[head0] ? commit0_v : commit1_v; wire [DBW-1:0] xbrpc = iqentry_br[head0] ? iqentry_pc[head0] : iqentry_pc[head1]; wire predict_taken0; wire predict_taken1; // This is really just a single history table with three read ports. // One for fetchbuf0, one for fetchbuf1 and one for the branch_pc. // Ideally, there really needs to be two write ports as well (for // head0 and head1). // There is only a single write port for branches committing at // head0 or head1. If there are two branches one after the other // in code, then the prediction will be off because the taken/ // not taken status for the second branch won't be updated. It // doesn't happen that often that branches are piled together and // executing during the same clock cycle. // There's usually at least an intervening compare operation. // Needs more work yet. // // ToDo: add return address stack predictor. // Thor_BranchHistory #(DBW) ubhtA ( .rst(rst_i), .clk(clk), .advanceX(xbr), .xisBranch(xbr), .pc(branch_pc), .xpc(xbrpc), .takb(takb), .predict_taken(predict_takenBr) ); Thor_BranchHistory #(DBW) ubhtB ( .rst(rst_i), .clk(clk), .advanceX(xbr), .xisBranch(xbr), .pc(fetchbuf0_pc), .xpc(xbrpc), .takb(takb), .predict_taken(predict_taken0) ); Thor_BranchHistory #(DBW) ubhtC ( .rst(rst_i), .clk(clk), .advanceX(xbr), .xisBranch(xbr), .pc(fetchbuf1_pc), .xpc(xbrpc), .takb(takb), .predict_taken(predict_taken1) ); /* Thor_BranchHistory #(DBW) ubhtC ( .rst(rst_i), .clk(clk), .advanceX(xbr), .xisBranch(xbr), .pc(pc), .xpc(xbrpc), .takb(takb), .predict_taken(predict_takenC) ); Thor_BranchHistory #(DBW) ubhtD ( .rst(rst_i), .clk(clk), .advanceX(xbr), .xisBranch(xbr), .pc(pc+fnInsnLength(insn)), .xpc(xbrpc), .takb(takb), .predict_taken(predict_takenD) ); */ `ifdef PCHIST wire [63:0] pc_histo; reg pc_cap; reg [5:0] pc_ndx; vtdl #(.WID(64),.DEP(64)) uvtl1 ( .clk(clk), .ce(pc_cap), .a(pc_ndx), .d({fetchbuf1_pc,fetcbuf0_pc}), .q(pc_histo) ); `endif Thor_icachemem #(.DBW(DBW),.ABW(ABW),.ECC(1'b0)) uicm1 ( .wclk(clk), .wce(cstate==ICACHE1), .wr(ack_i|err_i), .wa(adr_o), .wd(dat_i), .rclk(~clk), .pc(ppc), .insn(insn) ); wire hit0,hit1; reg ic_ld; reg [31:0] ic_ld_cntr; Thor_itagmem #(DBW-1) uitm1 ( .wclk(clk), .wce((cstate==ICACHE1 && cti_o==3'b111)|ic_ld), .wr(ack_i|err_i|ic_ld), .wa(adr_o|ic_ld_cntr), .err_i(err_i|ierr), .invalidate(ic_invalidate), .invalidate_line(ic_invalidate_line), .invalidate_lineno(ic_lineno), .rclk(~clk), .rce(1'b1), .pc(ppc), .hit0(hit0), .hit1(hit1), .err_o(insnerr) ); wire ihit = hit0 & hit1; wire do_pcinc = ihit;// && !((nmi_edge & ~StatusHWI & ~int_commit) || (irq_i & ~im & ~StatusHWI & ~int_commit)); wire ld_fetchbuf = ihit || (nmi_edge & !StatusHWI)||(irq_i & ~im & !StatusHWI); wire whit; Thor_dcachemem_1w1r #(DBW) udcm1 ( .wclk(clk), .wce(whit || cstate==DCACHE1), .wr(ack_i|err_i), .sel(whit ? sel_o : 8'hFF), .wa(adr_o), .wd(whit ? dat_o : dat_i[DBW-1:0]), .rclk(~clk), .rce(1'b1), .ra(pea), .o(cdat) ); Thor_dtagmem #(DBW-1) udtm1 ( .wclk(clk), .wce(cstate==DCACHE1 && cti_o==3'b111), .wr(ack_i|err_i), .wa(adr_o), .err_i(err_i|derr), .invalidate(dc_invalidate), .invalidate_line(dc_invalidate_line), .invalidate_lineno(dc_lineno), .rclk(~clk), .rce(1'b1), .ra(pea), .whit(whit), .rhit(rhit), .err_o() ); wire [DBW-1:0] shfto0,shfto1; function fnIsShiftiop; input [63:0] isn; fnIsShiftiop = isn[15:8]==`SHIFT && ( isn[39:34]==`SHLI || isn[39:34]==`SHLUI || isn[39:34]==`SHRI || isn[39:34]==`SHRUI || isn[39:34]==`ROLI || isn[39:34]==`RORI ) ; endfunction function fnIsShiftop; input [7:0] opcode; fnIsShiftop = opcode==`SHL || opcode==`SHLI || opcode==`SHLU || opcode==`SHLUI || opcode==`SHR || opcode==`SHRI || opcode==`SHRU || opcode==`SHRUI || opcode==`ROL || opcode==`ROLI || opcode==`ROR || opcode==`RORI ; endfunction function fnIsFP; input [7:0] opcode; fnIsFP = opcode==`DOUBLE_R||opcode==`FLOAT||opcode==`SINGLE_R; // opcode==`ITOF || opcode==`FTOI || opcode==`FNEG || opcode==`FSIGN || /*opcode==`FCMP || */ opcode==`FABS || // opcode==`FADD || opcode==`FSUB || opcode==`FMUL || opcode==`FDIV // ; endfunction function fnIsFPCtrl; input [63:0] isn; fnIsFPCtrl = (isn[15:8]==`SINGLE_R && (isn[31:28]==`FTX||isn[31:28]==`FCX||isn[31:28]==`FDX||isn[31:28]==`FEX)) || (isn[15:8]==`DOUBLE_R && (isn[31:28]==`FRM)) ; endfunction function fnIsBitfield; input [7:0] opcode; fnIsBitfield = opcode==`BITFIELD; endfunction //wire [3:0] Pn = ir[7:4]; // Set the target register // 00-3F = general register file // 40-4F = predicate register // 50-5F = code address register // 60-67 = segment base register // 68-6F = segment limit register // 70 = predicate register horizontal // 73 = loop counter // 7C = breakout index register // 7D = broken out register // 7F = power shift register function [6:0] fnTargetReg; input [63:0] ir; begin // Process special predicates (NOP, IMM) // Note that BRK (00) is already translated to a SYS instruction if (ir[3:0]==4'h0) fnTargetReg = 7'h000; else case(fnOpcode(ir)) `POP: fnTargetReg = ir[22:16]; `LDI,`ADDUIS,`STS,`LINK,`UNLINK: if (ir[21:16]==6'd27) fnTargetReg = r27; else fnTargetReg = {1'b0,ir[21:16]}; `LDIS: fnTargetReg = {1'b1,ir[21:16]}; `RR, `SHIFT, `BCD, `LOGIC,`FLOAT, `LWX,`LBX,`LBUX,`LCX,`LCUX,`LHX,`LHUX,`STMV,`STCMP,`STFND: if (ir[33:28]==6'd27) fnTargetReg = r27; else fnTargetReg = {1'b0,ir[33:28]}; `R,`R2,`DOUBLE_R,`SINGLE_R, `ADDI,`ADDUI,`SUBI,`SUBUI, `MULI,`MULUI,`DIVI,`DIVUI,`MODI,`MODUI, `_2ADDUI,`_4ADDUI,`_8ADDUI,`_16ADDUI, `ANDI,`ORI,`EORI,`LLA, `LVB,`LVC,`LVH,`LVW,`LVWAR, `LB,`LBU,`LC,`LCU,`LH,`LHU,`LW,`LINK, `BITFIELD,`MFSPR: if (ir[27:22]==6'd27) fnTargetReg = r27; else fnTargetReg = {1'b0,ir[27:22]}; `CAS: fnTargetReg = {1'b0,ir[39:34]}; `TLB: if (ir[19:16]==`TLB_RDREG) fnTargetReg = {1'b0,ir[29:24]}; else fnTargetReg = 7'h00; `BITI: fnTargetReg = {3'h4,ir[25:22]}; // TST 8'h00,8'h01,8'h02,8'h03, 8'h04,8'h05,8'h06,8'h07, 8'h08,8'h09,8'h0A,8'h0B, 8'h0C,8'h0D,8'h0E,8'h0F, // CMP 8'h10,8'h11,8'h12,8'h13, 8'h14,8'h15,8'h16,8'h17, 8'h18,8'h19,8'h1A,8'h1B, 8'h1C,8'h1D,8'h1E,8'h1F, // CMPI 8'h20,8'h21,8'h22,8'h23, 8'h24,8'h25,8'h26,8'h27, 8'h28,8'h29,8'h2A,8'h2B, 8'h2C,8'h2D,8'h2E,8'h2F: begin fnTargetReg = {3'h4,ir[11:8]}; end `SWCR: fnTargetReg = {3'h4,4'h0}; `JSR,`JSRZ,`JSRS,`SYS,`INT: fnTargetReg = {3'h5,ir[19:16]}; `JMPI: fnTargetReg = {3'h5,ir[25:22]}; `JMPIX: fnTargetReg = {3'h5,ir[31:28]}; `MTSPR,`MOVS,`LWS: if (ir[27:22]==`USP) fnTargetReg = {1'b0,6'd27}; else fnTargetReg = {1'b1,ir[27:22]}; /* if (ir[27:26]==2'h1) // Move to code address register fnTargetReg = {3'h5,ir[25:22]}; else if (ir[27:26]==2'h2) // Move to seg. reg. fnTargetReg = {3'h6,ir[25:22]}; else if (ir[27:22]==6'h04) fnTargetReg = 7'h70; else fnTargetReg = 7'h00; */ `PUSH: fnTargetReg = r27; `LOOP: fnTargetReg = 7'h73; `STP: fnTargetReg = 7'h7F; `P: fnTargetReg = 7'h70; default: fnTargetReg = 7'h00; endcase end endfunction /* function fnAllowedReg; input [8:0] regno; fnAllowedReg = allowedRegs[regno] ? regno : 9'h000; endfunction */ function fnTargetsCa; input [63:0] ir; begin if (ir[3:0]==4'h0) fnTargetsCa = `FALSE; else begin case(fnOpcode(ir)) `JSR,`JSRZ,`JSRS,`SYS,`INT: fnTargetsCa = `TRUE; `JMPI,`JMPIX: fnTargetsCa = `TRUE; `LWS: if (ir[27:26]==2'h1) fnTargetsCa = `TRUE; else fnTargetsCa = `FALSE; `LDIS: if (ir[21:20]==2'h1) fnTargetsCa = `TRUE; else fnTargetsCa = `FALSE; `MTSPR,`MOVS: begin if (ir[27:26]==2'h1) fnTargetsCa = `TRUE; else fnTargetsCa = `FALSE; end default: fnTargetsCa = `FALSE; endcase end end endfunction function fnTargetsSegreg; input [63:0] ir; if (ir[3:0]==4'h0) fnTargetsSegreg = `FALSE; else case(fnOpcode(ir)) `LWS: if (ir[27:26]==2'h2) fnTargetsSegreg = `TRUE; else fnTargetsSegreg = `FALSE; `LDIS: if (ir[21:20]==2'h2) fnTargetsSegreg = `TRUE; else fnTargetsSegreg = `FALSE; `MTSPR,`MOVS: if (ir[27:26]==2'h2) fnTargetsSegreg = `TRUE; else fnTargetsSegreg = `FALSE; default: fnTargetsSegreg = `FALSE; endcase endfunction function fnHasConst; input [7:0] opcode; case(opcode) `BFCLR,`BFSET,`BFCHG,`BFEXT,`BFEXTU,`BFINS, `LDI,`LDIS,`ADDUIS, `ADDI,`SUBI,`ADDUI,`SUBUI,`MULI,`MULUI,`DIVI,`DIVUI,`MODI,`MODUI, `_2ADDUI,`_4ADDUI,`_8ADDUI,`_16ADDUI,`CHKI, // CMPI 8'h20,8'h21,8'h22,8'h23, 8'h24,8'h25,8'h26,8'h27, 8'h28,8'h29,8'h2A,8'h2B, 8'h2C,8'h2D,8'h2E,8'h2F, // BR 8'h30,8'h31,8'h32,8'h33, 8'h34,8'h35,8'h36,8'h37, 8'h38,8'h39,8'h3A,8'h3B, 8'h3C,8'h3D,8'h3E,8'h3F, `ANDI,`ORI,`EORI,`BITI, // `SHLI,`SHLUI,`SHRI,`SHRUI,`ROLI,`RORI, `LB,`LBU,`LC,`LCU,`LH,`LHU,`LW,`LWS,`INC, `LVB,`LVC,`LVH,`LVW,`LVWAR,`STI,`JMPI, `SB,`SC,`SH,`SW,`SWCR,`CAS,`SWS, `RTI,`RTD,`RTE,`LLA, `JSR,`JSRS,`SYS,`INT,`LOOP,`PEA,`LINK,`UNLINK: fnHasConst = 1'b1; default: fnHasConst = 1'b0; endcase endfunction // Used by memory issue logic. function fnIsFlowCtrl; input [7:0] opcode; begin case(opcode) `JMPI,`JMPIX, `JSR,`JSRS,`JSRZ,`SYS,`INT,`LOOP,`RTS,`RTS2,`RTI,`RTD,`RTE: fnIsFlowCtrl = 1'b1; default: if (opcode[7:4]==`BR) fnIsFlowCtrl = 1'b1; else fnIsFlowCtrl = 1'b0; endcase end endfunction // fnCanException // // Used by memory issue logic. // Returns TRUE if the instruction can cause an exception. // In debug mode any instruction could potentially cause a breakpoint exception. // Rather than check all the addresses for potential debug exceptions it's // simpler to just have it so that all instructions could exception. This will // slow processing down somewhat as stores will only be done at the head of the // instruction queue, but it's debug mode so we probably don't care. // function fnCanException; input [7:0] op; input [5:0] func; if (debug_on) fnCanException = `TRUE; else case(op) `FLOAT: case(func) `FDIVS,`FMULS,`FADDS,`FSUBS, `FDIV,`FMUL,`FADD,`FSUB: fnCanException = `TRUE; default: fnCanException = `FALSE; endcase `SINGLE_R: if (func==`FTX) fnCanException = `TRUE; else fnCanException = `FALSE; `ADDI,`SUBI,`DIVI,`MODI,`MULI,`CHKI: fnCanException = `TRUE; `RR: if (func==`ADD || func==`SUB || func==`MUL || func==`DIV || func==`MOD || func==`CHK) fnCanException = `TRUE; else fnCanException = `FALSE; `TLB,`RTI,`RTD,`RTE,`CLI,`SEI: fnCanException = `TRUE; default: fnCanException = fnIsMem(op); endcase endfunction // fnInsnLength // Used by fetch logic. // Return the length of an instruction. // function [3:0] fnInsnLength; input [127:0] isn; case(isn[7:0]) 8'b00000000: fnInsnLength = 4'd1; // BRK 8'b00010000: fnInsnLength = 4'd1; // NOP 8'b00100000: fnInsnLength = 4'd2; 8'b00110000: fnInsnLength = 4'd3; 8'b01000000: fnInsnLength = 4'd4; 8'b01010000: fnInsnLength = 4'd5; 8'b01100000: fnInsnLength = 4'd6; 8'b01110000: fnInsnLength = 4'd7; 8'b10000000: fnInsnLength = 4'd8; default: case(isn[15:8]) `NOP,`SEI,`CLI,`RTI,`RTD,`RTE,`RTS2,`MEMSB,`MEMDB,`SYNC: fnInsnLength = 4'd2; `JSRZ,`RTS,`CACHE,`LOOP,`PUSH,`POP,`UNLINK: fnInsnLength = 4'd3; `SYS,`MTSPR,`MFSPR,`LDI,`LDIS,`ADDUIS,`R,`TLB,`MOVS,`STP: fnInsnLength = 4'd4; `BITFIELD,`JSR,`MUX,`BCD,`INC: fnInsnLength = 4'd6; `CAS: fnInsnLength = 4'd6; default: begin case(isn[15:12]) `TST: fnInsnLength = 4'd3; `BR: fnInsnLength = 4'd3; `CMP,`CMPI: fnInsnLength = 4'd4; default: fnInsnLength = 4'd5; endcase end endcase endcase endfunction function [3:0] fnInsnLength1; input [127:0] isn; case(fnInsnLength(isn)) 4'd1: fnInsnLength1 = fnInsnLength(isn[127: 8]); 4'd2: fnInsnLength1 = fnInsnLength(isn[127:16]); 4'd3: fnInsnLength1 = fnInsnLength(isn[127:24]); 4'd4: fnInsnLength1 = fnInsnLength(isn[127:32]); 4'd5: fnInsnLength1 = fnInsnLength(isn[127:40]); 4'd6: fnInsnLength1 = fnInsnLength(isn[127:48]); 4'd7: fnInsnLength1 = fnInsnLength(isn[127:56]); 4'd8: fnInsnLength1 = fnInsnLength(isn[127:64]); default: fnInsnLength1 = 4'd0; endcase endfunction function [3:0] fnInsnLength2; input [127:0] isn; case(fnInsnLength(isn)+fnInsnLength1(isn)) 4'd2: fnInsnLength2 = fnInsnLength(isn[127:16]); 4'd3: fnInsnLength2 = fnInsnLength(isn[127:24]); 4'd4: fnInsnLength2 = fnInsnLength(isn[127:32]); 4'd5: fnInsnLength2 = fnInsnLength(isn[127:40]); 4'd6: fnInsnLength2 = fnInsnLength(isn[127:48]); 4'd7: fnInsnLength2 = fnInsnLength(isn[127:56]); 4'd8: fnInsnLength2 = fnInsnLength(isn[127:64]); 4'd9: fnInsnLength2 = fnInsnLength(isn[127:72]); 4'd10: fnInsnLength2 = fnInsnLength(isn[127:80]); 4'd11: fnInsnLength2 = fnInsnLength(isn[127:88]); 4'd12: fnInsnLength2 = fnInsnLength(isn[127:96]); 4'd13: fnInsnLength2 = fnInsnLength(isn[127:104]); 4'd14: fnInsnLength2 = fnInsnLength(isn[127:112]); 4'd15: fnInsnLength2 = fnInsnLength(isn[127:120]); default: fnInsnLength2 = 4'd0; endcase endfunction wire [5:0] total_insn_length = fnInsnLength(insn) + fnInsnLength1(insn) + fnInsnLength2(insn); wire [5:0] insn_length12 = fnInsnLength(insn) + fnInsnLength1(insn); wire insn3_will_fit = total_insn_length < 6'd16; always @(fetchbuf or fetchbufA_instr or fetchbufA_v or fetchbufA_pc or fetchbufB_instr or fetchbufB_v or fetchbufB_pc or fetchbufC_instr or fetchbufC_v or fetchbufC_pc or fetchbufD_instr or fetchbufD_v or fetchbufD_pc ) begin fetchbuf0_instr <= (fetchbuf == 1'b0) ? fetchbufA_instr : fetchbufC_instr; fetchbuf0_v <= (fetchbuf == 1'b0) ? fetchbufA_v : fetchbufC_v ; if (int_pending && string_pc!=64'd0) fetchbuf0_pc <= string_pc; else fetchbuf0_pc <= (fetchbuf == 1'b0) ? fetchbufA_pc : fetchbufC_pc ; fetchbuf1_instr <= (fetchbuf == 1'b0) ? fetchbufB_instr : fetchbufD_instr; fetchbuf1_v <= (fetchbuf == 1'b0) ? fetchbufB_v : fetchbufD_v ; if (int_pending && string_pc != 64'd0) fetchbuf1_pc <= string_pc; else fetchbuf1_pc <= (fetchbuf == 1'b0) ? fetchbufB_pc : fetchbufD_pc ; end wire [7:0] opcodeA = fnOpcode(fetchbufA_instr); wire [7:0] opcodeB = fnOpcode(fetchbufB_instr); wire [7:0] opcodeC = fnOpcode(fetchbufC_instr); wire [7:0] opcodeD = fnOpcode(fetchbufD_instr); function fnIsMem; input [7:0] opcode; fnIsMem = opcode==`LB || opcode==`LBU || opcode==`LC || opcode==`LCU || opcode==`LH || opcode==`LHU || opcode==`LW || opcode==`LBX || opcode==`LWX || opcode==`LBUX || opcode==`LHX || opcode==`LHUX || opcode==`LCX || opcode==`LCUX || opcode==`SB || opcode==`SC || opcode==`SH || opcode==`SW || opcode==`SBX || opcode==`SCX || opcode==`SHX || opcode==`SWX || opcode==`STS || opcode==`LCL || opcode==`LVB || opcode==`LVC || opcode==`LVH || opcode==`LVW || opcode==`LVWAR || opcode==`SWCR || opcode==`TLB || opcode==`CAS || opcode==`STMV || opcode==`STCMP || opcode==`STFND || opcode==`LWS || opcode==`SWS || opcode==`STI || opcode==`INC || opcode==`JMPI || opcode==`JMPIX || opcode==`PUSH || opcode==`POP || opcode==`PEA || opcode==`LINK || opcode==`UNLINK ; endfunction // Determines which instruction write to the register file function fnIsRFW; input [7:0] opcode; input [63:0] ir; begin fnIsRFW = // General registers opcode==`LB || opcode==`LBU || opcode==`LC || opcode==`LCU || opcode==`LH || opcode==`LHU || opcode==`LW || opcode==`LBX || opcode==`LBUX || opcode==`LCX || opcode==`LCUX || opcode==`LHX || opcode==`LHUX || opcode==`LWX || opcode==`LVB || opcode==`LVH || opcode==`LVC || opcode==`LVW || opcode==`LVWAR || opcode==`SWCR || opcode==`STP || opcode==`LLA || opcode==`LLAX || opcode==`CAS || opcode==`LWS || opcode==`STMV || opcode==`STCMP || opcode==`STFND || opcode==`STS || opcode==`PUSH || opcode==`POP || opcode==`LINK || opcode==`UNLINK || opcode==`JMPI || opcode==`JMPIX || opcode==`ADDI || opcode==`SUBI || opcode==`ADDUI || opcode==`SUBUI || opcode==`MULI || opcode==`MULUI || opcode==`DIVI || opcode==`DIVUI || opcode==`MODI || opcode==`MODUI || opcode==`_2ADDUI || opcode==`_4ADDUI || opcode==`_8ADDUI || opcode==`_16ADDUI || opcode==`ANDI || opcode==`ORI || opcode==`EORI || opcode==`SHIFT || opcode==`LOGIC || opcode==`R || opcode==`R2 || opcode==`RR || opcode==`P || opcode==`LOOP || opcode==`BITI || opcode==`CMP || opcode==`CMPI || opcode==`TST || opcode==`LDI || opcode==`LDIS || opcode==`ADDUIS || opcode==`MFSPR || `ifdef FLOATING_POINT opcode==`DOUBLE_R || opcode==`FLOAT_RR || opcode==`SINGLE_R || `endif // Branch registers / Segment registers ((opcode==`MTSPR || opcode==`MOVS) /*&& (fnTargetsCa(ir) || fnTargetsSegreg(ir))*/) || opcode==`JSR || opcode==`JSRS || opcode==`JSRZ || opcode==`SYS || opcode==`INT || // predicate registers (opcode[7:4] < 4'h3) || (opcode==`TLB && ir[19:16]==`TLB_RDREG) || opcode==`BCD ; end endfunction function fnIsStore; input [7:0] opcode; fnIsStore = opcode==`SB || opcode==`SC || opcode==`SH || opcode==`SW || opcode==`SBX || opcode==`SCX || opcode==`SHX || opcode==`SWX || opcode==`STS || opcode==`SWCR || opcode==`SWS || opcode==`STI || opcode==`PUSH || opcode==`PEA || opcode==`LINK; endfunction function fnIsLoad; input [7:0] opcode; fnIsLoad = opcode==`LB || opcode==`LBU || opcode==`LC || opcode==`LCU || opcode==`LH || opcode==`LHU || opcode==`LW || opcode==`LBX || opcode==`LBUX || opcode==`LCX || opcode==`LCUX || opcode==`LHX || opcode==`LHUX || opcode==`LWX || opcode==`LVB || opcode==`LVC || opcode==`LVH || opcode==`LVW || opcode==`LVWAR || opcode==`LCL || opcode==`LWS || opcode==`UNLINK || opcode==`JMPI || opcode==`JMPIX || opcode==`POP; endfunction function fnIsLoadV; input [7:0] opcode; fnIsLoadV = opcode==`LVB || opcode==`LVC || opcode==`LVH || opcode==`LVW || opcode==`LVWAR || opcode==`LCL; endfunction function fnIsIndexed; input [7:0] opcode; fnIsIndexed = opcode==`LBX || opcode==`LBUX || opcode==`LCX || opcode==`LCUX || opcode==`LHX || opcode==`LHUX || opcode==`LWX || opcode==`SBX || opcode==`SCX || opcode==`SHX || opcode==`SWX || opcode==`JMPIX; endfunction // function fnIsPFW; input [7:0] opcode; fnIsPFW = opcode[7:4]<4'h3 || opcode==`BITI || opcode==`P;//opcode==`CMP || opcode==`CMPI || opcode==`TST; endfunction // Decoding for illegal opcodes function fnIsIllegal; input [7:0] op; input [5:0] fn; casex(op) 8'h40: if (fn > 6'h17) fnIsIllegal = `TRUE; else if (fn==6'hC || fn==6'hD || fn==6'hE || fn==6'hF || fn==6'h12 || fn==6'h15 || fn==6'h16) fnIsIllegal = `TRUE; else fnIsIllegal = `FALSE; 8'h41: if (fn > 6'd3) fnIsIllegal = `TRUE; else fnIsIllegal = `FALSE; 8'h42: if (fn > 6'd7) fnIsIllegal = `TRUE; else fnIsIllegal = `FALSE; 8'h50: if (fn > 6'd7) fnIsIllegal = `TRUE; else fnIsIllegal = `FALSE; 8'h58: if (fn > 6'h15 || (fn > 6'h5 && fn < 6'h10)) fnIsIllegal = `TRUE; else fnIsIllegal = `FALSE; 8'h77: if (fn==8'h99 || fn==8'h9A || fn==8'h9B || fn==8'h9E || fn==8'h9F) fnIsIllegal = `TRUE; else fnIsIllegal = `FALSE; 8'h78: if ((fn >= 8'h07 && fn <= 8'h0B) || (fn >= 8'h17 && fn <= 8'h1B)) fnIsIllegal = `FALSE; else fnIsIllegal = `TRUE; 8'h79: if (fn==8'h99 || fn==8'h9A || fn==8'h9B) fnIsIllegal = `TRUE; else fnIsIllegal = `FALSE; 8'hAA: if (fn > 4'd6) fnIsIllegal = `TRUE; else fnIsIllegal = `FALSE; 8'hF5: if (fn > 4'd2) fnIsIllegal = `TRUE; else fnIsIllegal = `FALSE; 8'h43,8'h44,8'h45: fnIsIllegal = `TRUE; 8'h52,8'h56,8'h57,8'h59,8'h5A,8'h5C,8'h5E: fnIsIllegal = `TRUE; 8'h60,8'h61,8'h62,8'h63,8'h64,8'h65,8'h66,8'h67,8'h68,8'h69: fnIsIllegal = `TRUE; 8'h73,8'h74,8'h75,8'h76,8'h7A,8'h7B,8'h7C,8'h7D,8'h7E,8'h7F: fnIsIllegal = `TRUE; 8'h87,8'h88,8'h89,8'h8A: fnIsIllegal = `TRUE; 8'h94,8'h95,8'h9C: fnIsIllegal = `TRUE; 8'hB9,8'hBA,8'hBB,8'hBC,8'hBD,8'hBE,8'hBF: fnIsIllegal = `TRUE; 8'hC4,8'hC5,8'b11001xxx: fnIsIllegal = `TRUE; 8'hDx: fnIsIllegal = `TRUE; 8'hEx: fnIsIllegal = `TRUE; 8'hFD,8'hFE: fnIsIllegal = `TRUE; default: fnIsIllegal = `FALSE; endcase endfunction function [7:0] fnSelect; input [7:0] opcode; input [5:0] fn; input [DBW-1:0] adr; begin if (DBW==32) case(opcode) `STS,`STMV,`STCMP,`STFND,`INC: case(fn[2:0]) 3'd0: case(adr[1:0]) 3'd0: fnSelect = 8'h11; 3'd1: fnSelect = 8'h22; 3'd2: fnSelect = 8'h44; 3'd3: fnSelect = 8'h88; endcase 3'd1: case(adr[1]) 1'd0: fnSelect = 8'h33; 1'd1: fnSelect = 8'hCC; endcase 3'd2: fnSelect = 8'hFF; default: fnSelect = 8'h00; endcase `JMPI,`JMPIX: case(fn[1:0]) 2'd1: case(adr[1]) 1'b0: fnSelect = 8'h33; 1'b1: fnSelect = 8'hCC; endcase 2'd2: fnSelect = 8'hFF; 2'd3: fnSelect = 8'hFF; default: fnSelect = 8'h00; endcase `LB,`LBU,`LBX,`LBUX,`SB,`SBX,`LVB: case(adr[1:0]) 3'd0: fnSelect = 8'h11; 3'd1: fnSelect = 8'h22; 3'd2: fnSelect = 8'h44; 3'd3: fnSelect = 8'h88; endcase `LC,`LCU,`SC,`LVC,`LCX,`LCUX,`SCX: case(adr[1]) 1'd0: fnSelect = 8'h33; 1'd1: fnSelect = 8'hCC; endcase `LH,`LHU,`SH,`LVH,`LHX,`LHUX,`SHX: fnSelect = 8'hFF; `LW,`LWX,`SW,`SWCR,`LVW,`LVWAR,`SWX,`CAS,`LWS,`SWS,`STI,`LCL, `PUSH,`PEA,`POP,`LINK,`UNLINK: fnSelect = 8'hFF; default: fnSelect = 8'h00; endcase else case(opcode) `STS,`STMV,`STCMP,`STFND,`INC: case(fn[2:0]) 3'd0: case(adr[2:0]) 3'd0: fnSelect = 8'h01; 3'd1: fnSelect = 8'h02; 3'd2: fnSelect = 8'h04; 3'd3: fnSelect = 8'h08; 3'd4: fnSelect = 8'h10; 3'd5: fnSelect = 8'h20; 3'd6: fnSelect = 8'h40; 3'd7: fnSelect = 8'h80; endcase 3'd1: case(adr[2:1]) 2'd0: fnSelect = 8'h03; 2'd1: fnSelect = 8'h0C; 2'd2: fnSelect = 8'h30; 2'd3: fnSelect = 8'hC0; endcase 3'd2: case(adr[2]) 1'b0: fnSelect = 8'h0F; 1'b1: fnSelect = 8'hF0; endcase 3'd3: fnSelect = 8'hFF; default: fnSelect = 8'h00; endcase `JMPI,`JMPIX: case(fn[1:0]) 2'd1: case(adr[2:1]) 2'd0: fnSelect = 8'h03; 2'd1: fnSelect = 8'h0C; 2'd2: fnSelect = 8'h30; 2'd3: fnSelect = 8'hC0; endcase 2'd2: case(adr[2]) 1'b0: fnSelect = 8'h0F; 1'b1: fnSelect = 8'hF0; endcase 2'd3: fnSelect = 8'hFF; default: fnSelect = 8'h00; endcase `LB,`LBU,`LBX,`SB,`LVB,`LBUX,`SBX: case(adr[2:0]) 3'd0: fnSelect = 8'h01; 3'd1: fnSelect = 8'h02; 3'd2: fnSelect = 8'h04; 3'd3: fnSelect = 8'h08; 3'd4: fnSelect = 8'h10; 3'd5: fnSelect = 8'h20; 3'd6: fnSelect = 8'h40; 3'd7: fnSelect = 8'h80; endcase `LC,`LCU,`SC,`LVC,`LCX,`LCUX,`SCX: case(adr[2:1]) 2'd0: fnSelect = 8'h03; 2'd1: fnSelect = 8'h0C; 2'd2: fnSelect = 8'h30; 2'd3: fnSelect = 8'hC0; endcase `LH,`LHU,`SH,`LVH,`LHX,`LHUX,`SHX: case(adr[2]) 1'b0: fnSelect = 8'h0F; 1'b1: fnSelect = 8'hF0; endcase `LW,`LWX,`SW,`SWCR,`LVW,`LVWAR,`SWX,`CAS,`LWS,`SWS,`STI,`LCL, `PUSH,`PEA,`POP,`LINK,`UNLINK: fnSelect = 8'hFF; default: fnSelect = 8'h00; endcase end endfunction function [DBW-1:0] fnDatai; input [7:0] opcode; input [5:0] func; input [DBW-1:0] dat; input [7:0] sel; begin if (DBW==32) case(opcode) `STMV,`STCMP,`STFND,`INC: case(func[2:0]) 3'd0,3'd4: case(sel[3:0]) 4'h1: fnDatai = dat[7:0]; 4'h2: fnDatai = dat[15:8]; 4'h4: fnDatai = dat[23:16]; 4'h8: fnDatai = dat[31:24]; default: fnDatai = {DBW{1'b1}}; endcase 3'd1,3'd5: case(sel[3:0]) 4'h3: fnDatai = dat[15:0]; 4'hC: fnDatai = dat[31:16]; default: fnDatai = {DBW{1'b1}}; endcase default: fnDatai = dat[31:0]; endcase `JMPI,`JMPIX: case(func[1:0]) 2'd1: case(sel[3:0]) 4'h3: fnDatai = dat[15:0]; 4'hC: fnDatai = dat[31:16]; default: fnDatai = {DBW{1'b1}}; endcase 2'd2: fnDatai = dat[31:0]; default: fnDatai = dat[31:0]; endcase `LB,`LBX,`LVB: case(sel[3:0]) 8'h1: fnDatai = {{24{dat[7]}},dat[7:0]}; 8'h2: fnDatai = {{24{dat[15]}},dat[15:8]}; 8'h4: fnDatai = {{24{dat[23]}},dat[23:16]}; 8'h8: fnDatai = {{24{dat[31]}},dat[31:24]}; default: fnDatai = {DBW{1'b1}}; endcase `LBU,`LBUX: case(sel[3:0]) 4'h1: fnDatai = dat[7:0]; 4'h2: fnDatai = dat[15:8]; 4'h4: fnDatai = dat[23:16]; 4'h8: fnDatai = dat[31:24]; default: fnDatai = {DBW{1'b1}}; endcase `LC,`LVC,`LCX: case(sel[3:0]) 4'h3: fnDatai = {{16{dat[15]}},dat[15:0]}; 4'hC: fnDatai = {{16{dat[31]}},dat[31:16]}; default: fnDatai = {DBW{1'b1}}; endcase `LCU,`LCUX: case(sel[3:0]) 4'h3: fnDatai = dat[15:0]; 4'hC: fnDatai = dat[31:16]; default: fnDatai = {DBW{1'b1}}; endcase `LH,`LHU,`LW,`LWX,`LVH,`LVW,`LVWAR,`LHX,`LHUX,`CAS,`LCL,`LWS,`POP,`UNLINK: fnDatai = dat[31:0]; default: fnDatai = {DBW{1'b1}}; endcase else case(opcode) `STMV,`STCMP,`STFND,`INC: case(func[2:0]) 3'd0,3'd4: case(sel) 8'h01: fnDatai = dat[DBW*1/8-1:0]; 8'h02: fnDatai = dat[DBW*2/8-1:DBW*1/8]; 8'h04: fnDatai = dat[DBW*3/8-1:DBW*2/8]; 8'h08: fnDatai = dat[DBW*4/8-1:DBW*3/8]; 8'h10: fnDatai = dat[DBW*5/8-1:DBW*4/8]; 8'h20: fnDatai = dat[DBW*6/8-1:DBW*5/8]; 8'h40: fnDatai = dat[DBW*7/8-1:DBW*6/8]; 8'h80: fnDatai = dat[DBW-1:DBW*7/8]; default: fnDatai = {DBW{1'b1}}; endcase 3'd1,3'd5: case(sel) 8'h03: fnDatai = dat[DBW/4-1:0]; 8'h0C: fnDatai = dat[DBW/2-1:DBW/4]; 8'h30: fnDatai = dat[DBW*3/4-1:DBW/2]; 8'hC0: fnDatai = dat[DBW-1:DBW*3/4]; default: fnDatai = {DBW{1'b1}}; endcase 3'd2,3'd6: case(sel) 8'h0F: fnDatai = dat[DBW/2-1:0]; 8'hF0: fnDatai = dat[DBW-1:DBW/2]; default: fnDatai = {DBW{1'b1}}; endcase 3'd3,3'd7: fnDatai = dat; endcase `JMPI,`JMPIX: case(func[1:0]) 2'd1: case(sel[7:0]) 8'h03: fnDatai = dat[15:0]; 8'h0C: fnDatai = dat[31:16]; 8'h30: fnDatai = dat[47:32]; 8'hC0: fnDatai = dat[63:48]; default: fnDatai = dat[15:0]; endcase 2'd2: case(sel[7:0]) 8'h0F: fnDatai = dat[31:0]; 8'hF0: fnDatai = dat[63:32]; default: fnDatai = dat[31:0]; endcase 2'd3: fnDatai = dat; default: fnDatai = dat; endcase `LB,`LBX,`LVB: case(sel) 8'h01: fnDatai = {{DBW*7/8{dat[DBW*1/8-1]}},dat[DBW*1/8-1:0]}; 8'h02: fnDatai = {{DBW*7/8{dat[DBW*2/8-1]}},dat[DBW*2/8-1:DBW*1/8]}; 8'h04: fnDatai = {{DBW*7/8{dat[DBW*3/8-1]}},dat[DBW*3/8-1:DBW*2/8]}; 8'h08: fnDatai = {{DBW*7/8{dat[DBW*4/8-1]}},dat[DBW*4/8-1:DBW*3/8]}; 8'h10: fnDatai = {{DBW*7/8{dat[DBW*5/8-1]}},dat[DBW*5/8-1:DBW*4/8]}; 8'h20: fnDatai = {{DBW*7/8{dat[DBW*6/8-1]}},dat[DBW*6/8-1:DBW*5/8]}; 8'h40: fnDatai = {{DBW*7/8{dat[DBW*7/8-1]}},dat[DBW*7/8-1:DBW*6/8]}; 8'h80: fnDatai = {{DBW*7/8{dat[DBW-1]}},dat[DBW-1:DBW*7/8]}; default: fnDatai = {DBW{1'b1}}; endcase `LBU,`LBUX: case(sel) 8'h01: fnDatai = dat[DBW*1/8-1:0]; 8'h02: fnDatai = dat[DBW*2/8-1:DBW*1/8]; 8'h04: fnDatai = dat[DBW*3/8-1:DBW*2/8]; 8'h08: fnDatai = dat[DBW*4/8-1:DBW*3/8]; 8'h10: fnDatai = dat[DBW*5/8-1:DBW*4/8]; 8'h20: fnDatai = dat[DBW*6/8-1:DBW*5/8]; 8'h40: fnDatai = dat[DBW*7/8-1:DBW*6/8]; 8'h80: fnDatai = dat[DBW-1:DBW*7/8]; default: fnDatai = {DBW{1'b1}}; endcase `LC,`LVC,`LCX: case(sel) 8'h03: fnDatai = {{DBW*3/4{dat[DBW/4-1]}},dat[DBW/4-1:0]}; 8'h0C: fnDatai = {{DBW*3/4{dat[DBW/2-1]}},dat[DBW/2-1:DBW/4]}; 8'h30: fnDatai = {{DBW*3/4{dat[DBW*3/4-1]}},dat[DBW*3/4-1:DBW/2]}; 8'hC0: fnDatai = {{DBW*3/4{dat[DBW-1]}},dat[DBW-1:DBW*3/4]}; default: fnDatai = {DBW{1'b1}}; endcase `LCU,`LCUX: case(sel) 8'h03: fnDatai = dat[DBW/4-1:0]; 8'h0C: fnDatai = dat[DBW/2-1:DBW/4]; 8'h30: fnDatai = dat[DBW*3/4-1:DBW/2]; 8'hC0: fnDatai = dat[DBW-1:DBW*3/4]; default: fnDatai = {DBW{1'b1}}; endcase `LH,`LVH,`LHX: case(sel) 8'h0F: fnDatai = {{DBW/2{dat[DBW/2-1]}},dat[DBW/2-1:0]}; 8'hF0: fnDatai = {{DBW/2{dat[DBW-1]}},dat[DBW-1:DBW/2]}; default: fnDatai = {DBW{1'b1}}; endcase `LHU,`LHUX: case(sel) 8'h0F: fnDatai = dat[DBW/2-1:0]; 8'hF0: fnDatai = dat[DBW-1:DBW/2]; default: fnDatai = {DBW{1'b1}}; endcase `LW,`LWX,`LVW,`LVWAR,`CAS,`LCL,`LWS,`POP,`UNLINK: case(sel) 8'hFF: fnDatai = dat; default: fnDatai = {DBW{1'b1}}; endcase default: fnDatai = {DBW{1'b1}}; endcase end endfunction function [DBW-1:0] fnDatao; input [7:0] opcode; input [5:0] func; input [DBW-1:0] dat; if (DBW==32) case(opcode) `STMV,`INC: case(func[2:0]) 3'd0,3'd4: fnDatao = {4{dat[7:0]}}; 3'd1,3'd5: fnDatao = {2{dat[15:8]}}; default: fnDatao = dat; endcase `SW,`SWCR,`SWX,`CAS,`SWS,`STI, `PUSH,`PEA,`LINK: fnDatao = dat; `SH,`SHX: fnDatao = dat; `SC,`SCX: fnDatao = {2{dat[15:0]}}; `SB,`SBX: fnDatao = {4{dat[7:0]}}; default: fnDatao = dat; endcase else case(opcode) `STMV,`INC: case(func[2:0]) 3'd0,3'd4: fnDatao = {8{dat[DBW/8-1:0]}}; 3'd1,3'd5: fnDatao = {4{dat[DBW/4-1:0]}}; 3'd2,3'd6: fnDatao = {2{dat[DBW/2-1:0]}}; 3'd3,3'd7: fnDatao = dat; endcase `SW,`SWCR,`SWX,`CAS,`SWS,`STI, `PUSH,`PEA,`LINK: fnDatao = dat; `SH,`SHX: fnDatao = {2{dat[DBW/2-1:0]}}; `SC,`SCX: fnDatao = {4{dat[DBW/4-1:0]}}; `SB,`SBX: fnDatao = {8{dat[DBW/8-1:0]}}; default: fnDatao = dat; endcase endfunction assign fetchbuf0_mem = fnIsMem(opcode0); assign fetchbuf0_jmp = fnIsFlowCtrl(opcode0); assign fetchbuf0_fp = fnIsFP(opcode0); assign fetchbuf0_rfw = fnIsRFW(opcode0,fetchbuf0_instr); assign fetchbuf0_pfw = fnIsPFW(opcode0); assign fetchbuf1_mem = fnIsMem(opcode1); assign fetchbuf1_jmp = fnIsFlowCtrl(opcode1); assign fetchbuf1_fp = fnIsFP(opcode1); assign fetchbuf1_rfw = fnIsRFW(opcode1,fetchbuf1_instr); assign fetchbuf1_pfw = fnIsPFW(opcode1); // // set branchback and backpc values ... ignore branches in fetchbuf slots not ready for enqueue yet // assign take_branch0 = ({fetchbuf0_v, fnIsBranch(opcode0), predict_taken0} == {`VAL, `TRUE, `TRUE}) || ({fetchbuf0_v, opcode0==`LOOP} == {`VAL, `TRUE}) ; assign take_branch1 = ({fetchbuf1_v, fnIsBranch(opcode1), predict_taken1} == {`VAL, `TRUE, `TRUE}) || ({fetchbuf1_v, opcode1==`LOOP} == {`VAL, `TRUE}) ; assign take_branch = take_branch0 || take_branch1 ; always @* if (fnIsBranch(opcode0) && fetchbuf0_v && predict_taken0) begin branch_pc <= fetchbuf0_pc + {{ABW-12{fetchbuf0_instr[11]}},fetchbuf0_instr[11:8],fetchbuf0_instr[23:16]} + 64'd3; end else if (opcode0==`LOOP && fetchbuf0_v) begin branch_pc <= fetchbuf0_pc + {{ABW-8{fetchbuf0_instr[23]}},fetchbuf0_instr[23:16]} + 64'd3; end else if (fnIsBranch(opcode1) && fetchbuf1_v && predict_taken1) begin branch_pc <= fetchbuf1_pc + {{ABW-12{fetchbuf1_instr[11]}},fetchbuf1_instr[11:8],fetchbuf1_instr[23:16]} + 64'd3; end else if (opcode1==`LOOP && fetchbuf1_v) begin branch_pc <= fetchbuf1_pc + {{ABW-8{fetchbuf1_instr[23]}},fetchbuf1_instr[23:16]} + 64'd3; end else begin branch_pc <= RSTPC; // set to something to prevent a latch end assign int_pending = (nmi_edge & ~StatusHWI & ~int_commit) || (irq_i & ~im & ~StatusHWI & ~int_commit); assign mem_stringmissx = ((dram0_op==`STS || dram0_op==`STFND) && int_pending && lc != 0 && !mem_stringmiss) || ((dram0_op==`STMV || dram0_op==`STCMP) && int_pending && lc != 0 && !mem_stringmiss && stmv_flag); assign jmpi_miss = dram_v && (dram0_op==`JMPI || dram0_op==`JMPIX); // "Stream" interrupt instructions into the instruction stream until an INT // instruction commits. This avoids the problem of an INT instruction being // stomped on by a previous branch instruction. // Populate the instruction buffers with INT instructions for a hardware interrupt // Also populate the instruction buffers with a call to the instruction error vector // if an error occurred during instruction load time. // Translate the BRK opcode to a syscall. // There is a one cycle delay in setting the StatusHWI that allowed an extra INT // instruction to sneek into the queue. This is NOPped out by the int_commit // signal. // On a cache miss the instruction buffers are loaded with NOPs this prevents // the PC from being trashed by invalid branch instructions. reg [63:0] insn1a,insn2a; reg [63:0] insn0,insn1,insn2; always @* //if (int_commit) // insn0 <= {8{8'h10}}; // load with NOPs //else if (nmi_edge & ~StatusHWI & ~int_commit) insn0 <= {8'hFE,8'hCE,8'hA6,8'h01,8'hFE,8'hCE,8'hA6,8'h01}; else if (ITLBMiss) insn0 <= {8'hF9,8'hCE,8'hA6,8'h01,8'hF9,8'hCE,8'hA6,8'h01}; else if (insnerr) insn0 <= {8'hFC,8'hCE,8'hA6,8'h01,8'hFC,8'hCE,8'hA6,8'h01}; else if (irq_i & ~im & ~StatusHWI & ~int_commit) insn0 <= {vec_i,8'hCE,8'hA6,8'h01,vec_i,8'hCE,8'hA6,8'h01}; else if (ihit) begin if (insn[7:0]==8'h00) insn0 <= {8'h00,8'hCD,8'hA5,8'h01,8'h00,8'hCD,8'hA5,8'h01}; else insn0 <= insn[63:0]; end else insn0 <= {8{8'h10}}; // load with NOPs always @* //if (int_commit) // insn1 <= {8{8'h10}}; // load with NOPs //else if (nmi_edge & ~StatusHWI & ~int_commit) insn1 <= {8'hFE,8'hCE,8'hA6,8'h01,8'hFE,8'hCE,8'hA6,8'h01}; else if (ITLBMiss) insn1 <= {8'hF9,8'hCE,8'hA6,8'h01,8'hF9,8'hCE,8'hA6,8'h01}; else if (insnerr) insn1 <= {8'hFC,8'hCE,8'hA6,8'h01,8'hFC,8'hCE,8'hA6,8'h01}; else if (irq_i & ~im & ~StatusHWI & ~int_commit) insn1 <= {vec_i,8'hCE,8'hA6,8'h01,vec_i,8'hCE,8'hA6,8'h01}; else if (ihit) begin if (insn1a[7:0]==8'h00) insn1 <= {8'h00,8'hCD,8'hA5,8'h01,8'h00,8'hCD,8'hA5,8'h01}; else insn1 <= insn1a; end else insn1 <= {8{8'h10}}; // load with NOPs // Find the second instruction in the instruction line. always @(insn) case(fnInsnLength(insn)) 4'd1: insn1a <= insn[71: 8]; 4'd2: insn1a <= insn[79:16]; 4'd3: insn1a <= insn[87:24]; 4'd4: insn1a <= insn[95:32]; 4'd5: insn1a <= insn[103:40]; 4'd6: insn1a <= insn[111:48]; 4'd7: insn1a <= insn[119:56]; 4'd8: insn1a <= insn[127:64]; default: insn1a <= {8{8'h10}}; // NOPs endcase // Return the immediate field of an instruction function [63:0] fnImm; input [127:0] insn; case(insn[15:8]) `P: fnImm = insn[33:16]; `CAS: fnImm = {{56{insn[47]}},insn[47:40]}; `BCD: fnImm = insn[47:40]; `TLB: fnImm = insn[23:16]; `LOOP: fnImm = {{56{insn[23]}},insn[23:16]}; `STP: fnImm = insn[31:16]; `JSR: fnImm = {{40{insn[47]}},insn[47:24]}; `JSRS: fnImm = {{48{insn[39]}},insn[39:24]}; `BITFIELD: fnImm = insn[47:32]; `SYS,`INT: fnImm = {insn[31:24],4'h0}; //`CMPI, 8'h20,8'h21,8'h22,8'h23, 8'h24,8'h25,8'h26,8'h27, 8'h28,8'h29,8'h2A,8'h2B, 8'h2C,8'h2D,8'h2E,8'h2F, `LDI,`LDIS,`ADDUIS: fnImm = {{54{insn[31]}},insn[31:22]}; `RTS: fnImm = insn[19:16]; `RTD,`RTE,`RTI,`RTS2,`JSRZ,`STMV,`STCMP,`STFND,`CACHE,`STS: fnImm = 64'h0; `STI: fnImm = {{58{insn[33]}},insn[33:28]}; `PUSH: fnImm = 64'hFFFFFFFFFFFFFFF8; //-8 //`LINK: fnImm = {insn[39:28],3'b000}; `JMPI,`LLA, `LB,`LBU,`LC,`LCU,`LH,`LHU,`LW,`LVB,`LVC,`LVH,`LVW,`LVWAR, `SB,`SC,`SH,`SW,`SWCR,`LWS,`SWS,`INC,`LCL,`PEA: fnImm = {{55{insn[36]}},insn[36:28]}; default: fnImm = {{52{insn[39]}},insn[39:28]}; endcase endfunction function [7:0] fnImm8; input [127:0] insn; case(insn[15:8]) `CAS: fnImm8 = insn[47:40]; `BCD: fnImm8 = insn[47:40]; `TLB: fnImm8 = insn[23:16]; `LOOP: fnImm8 = insn[23:16]; `STP: fnImm8 = insn[23:16]; `JSR,`JSRS: fnImm8 = insn[31:24]; `BITFIELD: fnImm8 = insn[39:32]; `SYS,`INT: fnImm8 = {insn[27:24],4'h0}; //`CMPI, 8'h20,8'h21,8'h22,8'h23, 8'h24,8'h25,8'h26,8'h27, 8'h28,8'h29,8'h2A,8'h2B, 8'h2C,8'h2D,8'h2E,8'h2F, `LDI,`LDIS,`ADDUIS: fnImm8 = insn[29:22]; `RTS: fnImm8 = insn[19:16]; `RTD,`RTE,`RTI,`RTS2,`JSRZ,`STMV,`STCMP,`STFND,`CACHE,`STS: fnImm8 = 8'h00; `STI: fnImm8 = insn[35:28]; `PUSH: fnImm8 = 8'hF8; `ifdef STACKOPS `LINK: fnImm8 = {insn[32:28],3'b000}; `endif `JMPI,`LLA, `LB,`LBU,`LC,`LCU,`LH,`LHU,`LW,`LVB,`LVC,`LVH,`LVW,`LVWAR, `SB,`SC,`SH,`SW,`SWCR,`LWS,`SWS,`INC,`LCL,`PEA: fnImm8 = insn[35:28]; default: fnImm8 = insn[35:28]; endcase endfunction // Return MSB of immediate value for instruction function fnImmMSB; input [127:0] insn; case(insn[15:8]) `CAS: fnImmMSB = insn[47]; `TLB,`BCD,`STP: fnImmMSB = 1'b0; // TLB regno is unsigned `LOOP: fnImmMSB = insn[23]; `JSR: fnImmMSB = insn[47]; `JSRS: fnImmMSB = insn[39]; //`CMPI, 8'h20,8'h21,8'h22,8'h23, 8'h24,8'h25,8'h26,8'h27, 8'h28,8'h29,8'h2A,8'h2B, 8'h2C,8'h2D,8'h2E,8'h2F, `LDI,`LDIS,`ADDUIS: fnImmMSB = insn[31]; `SYS,`INT,`CACHE,`LINK: fnImmMSB = 1'b0; // SYS,INT are unsigned `RTS,`RTD,`RTE,`RTI,`JSRZ,`STMV,`STCMP,`STFND,`RTS2,`STS: fnImmMSB = 1'b0; // RTS is unsigned `PUSH: fnImmMSB = 1'b1; `LBX,`LBUX,`LCX,`LCUX,`LHX,`LHUX,`LWX, `SBX,`SCX,`SHX,`SWX: fnImmMSB = insn[47]; `JMPI,`LLA, `LB,`LBU,`LC,`LCU,`LH,`LHU,`LW,`LVB,`LVC,`LVH,`LVW, `SB,`SC,`SH,`SW,`SWCR,`STI,`LWS,`SWS,`INC,`LCL,`PEA: fnImmMSB = insn[36]; default: fnImmMSB = insn[39]; endcase endfunction function [63:0] fnImmImm; input [63:0] insn; case(insn[7:4]) 4'd2: fnImmImm = {{48{insn[15]}},insn[15:8],8'h00}; 4'd3: fnImmImm = {{40{insn[23]}},insn[23:8],8'h00}; 4'd4: fnImmImm = {{32{insn[31]}},insn[31:8],8'h00}; 4'd5: fnImmImm = {{24{insn[39]}},insn[39:8],8'h00}; 4'd6: fnImmImm = {{16{insn[47]}},insn[47:8],8'h00}; 4'd7: fnImmImm = {{ 8{insn[55]}},insn[55:8],8'h00}; 4'd8: fnImmImm = {insn[63:8],8'h00}; default: fnImmImm = 64'd0; endcase endfunction // Used during enque // Operand A is a little more work than B or C as it may read from special // purpose registers. function [63:0] fnOpa; input [7:0] opcode; input [6:0] Ra; input [63:0] ins; input [63:0] rfo; input [63:0] epc; begin `ifdef BITFIELDOPS if (opcode==`BITFIELD && ins[43:40]==`BFINSI) fnOpa = ins[21:16]; else `endif if (Ra[6]) fnOpa = fnSpr(Ra[5:0],epc); else fnOpa = rfo; end endfunction function [DBW-1:0] fnOpb; input [7:0] opcode; input [6:0] Rb; input [63:0] ins; input [63:0] rfo; input [63:0] epc; begin fnOpb = fnIsShiftiop(ins) ? {{DBW-6{1'b0}},ins[`INSTRUCTION_RB]} : fnIsFPCtrl(ins) ? {{DBW-6{1'b0}},ins[`INSTRUCTION_RB]} : opcode==`INC ? {{56{ins[47]}},ins[47:40]} : opcode==`STI ? ins[27:22] : Rb[6] ? fnSpr(Rb[5:0],epc) : rfo; end endfunction // Used during enque function [63:0] fnOpt; input [6:0] tgt; input [63:0] rfo; input [63:0] epc; begin if (tgt[6]) fnOpt = fnSpr(tgt[5:0],epc); else fnOpt = rfo; end endfunction // Returns TRUE if instruction is only allowed in kernel mode. function fnIsKMOnly; input [7:0] op; `ifdef PRIVCHKS fnIsKMOnly = op==`RTI || op==`RTE || op==`RTD || op==`TLB || op==`CLI || op==`SEI || op==`STP ; `else fnIsKMOnly = `FALSE; `endif endfunction function fnIsKMOnlyReg; input [6:0] regx; `ifdef PRIVCHKS fnIsKMOnlyReg = regx==7'd28 || regx==7'd29 || regx==7'd30 || regx==7'd31 || regx==7'h5B || regx==7'h5C || regx==7'h5D || regx==7'h5E ; `else fnIsKMOnlyReg = `FALSE; `endif endfunction // Returns TRUE if the register is automatically valid. function fnRegIsAutoValid; input [6:0] regno; // r0, c0, c15, tick fnRegIsAutoValid = regno==7'h00 || regno==7'h50 || regno==7'h5F || regno==7'h72; endfunction function [15:0] fnRegstrGrp; input [6:0] Rn; if (!Rn[6]) begin fnRegstrGrp="GP"; end else case(Rn[5:4]) 2'h0: fnRegstrGrp="PR"; 2'h1: fnRegstrGrp="CA"; 2'h2: fnRegstrGrp="SG"; 2'h3: case(Rn[3:0]) 3'h0: fnRegstrGrp="PA"; 3'h3: fnRegstrGrp="LC"; endcase endcase endfunction function [7:0] fnRegstr; input [6:0] Rn; begin if (!Rn[6]) begin fnRegstr = Rn[5:0]; end else fnRegstr = Rn[3:0]; end endfunction initial begin // // set up panic messages message[ `PANIC_NONE ] = "NONE "; message[ `PANIC_FETCHBUFBEQ ] = "FETCHBUFBEQ "; message[ `PANIC_INVALIDISLOT ] = "INVALIDISLOT "; message[ `PANIC_IDENTICALDRAMS ] = "IDENTICALDRAMS "; message[ `PANIC_OVERRUN ] = "OVERRUN "; message[ `PANIC_HALTINSTRUCTION ] = "HALTINSTRUCTION "; message[ `PANIC_INVALIDMEMOP ] = "INVALIDMEMOP "; message[ `PANIC_INVALIDFBSTATE ] = "INVALIDFBSTATE "; message[ `PANIC_INVALIDIQSTATE ] = "INVALIDIQSTATE "; message[ `PANIC_BRANCHBACK ] = "BRANCHBACK "; message[ `PANIC_MEMORYRACE ] = "MEMORYRACE "; end //`include "Thor_issue_combo.v" /* assign iqentry_imm[0] = fnHasConst(iqentry_op[0]), iqentry_imm[1] = fnHasConst(iqentry_op[1]), iqentry_imm[2] = fnHasConst(iqentry_op[2]), iqentry_imm[3] = fnHasConst(iqentry_op[3]), iqentry_imm[4] = fnHasConst(iqentry_op[4]), iqentry_imm[5] = fnHasConst(iqentry_op[5]), iqentry_imm[6] = fnHasConst(iqentry_op[6]), iqentry_imm[7] = fnHasConst(iqentry_op[7]); */ // // additional logic for ISSUE // // for the moment, we look at ALU-input buffers to allow back-to-back issue of // dependent instructions ... we do not, however, look ahead for DRAM requests // that will become valid in the next cycle. instead, these have to propagate // their results into the IQ entry directly, at which point it becomes issue-able // /* always @* for (n = 0; n < QENTRIES; n = n + 1) iq_cmt[n] <= fnPredicate(iqentry_pred[n], iqentry_cond[n]) || (iqentry_cond[n] < 4'h2 && ({iqentry_pred[n],iqentry_cond[n]}!=8'h90)); */ wire [QENTRIES-1:0] args_valid; wire [QENTRIES-1:0] could_issue; genvar g; generate begin : argsv for (g = 0; g < QENTRIES; g = g + 1) begin assign iqentry_imm[g] = fnHasConst(iqentry_op[g]); assign args_valid[g] = (iqentry_p_v[g] || (iqentry_p_s[g]==alu0_sourceid && alu0_v) || (iqentry_p_s[g]==alu1_sourceid && alu1_v)) && (iqentry_a1_v[g] // || (iqentry_mem[g] && !iqentry_agen[g] && iqentry_op[g]!=`TLB) || (iqentry_a1_s[g] == alu0_sourceid && alu0_v) || (iqentry_a1_s[g] == alu1_sourceid && alu1_v)) && (iqentry_a2_v[g] || (iqentry_a2_s[g] == alu0_sourceid && alu0_v) || (iqentry_a2_s[g] == alu1_sourceid && alu1_v)) && (iqentry_a3_v[g] || (iqentry_a3_s[g] == alu0_sourceid && alu0_v) || (iqentry_a3_s[g] == alu1_sourceid && alu1_v)) && (iqentry_T_v[g] || (iqentry_T_s[g] == alu0_sourceid && alu0_v) || (iqentry_T_s[g] == alu1_sourceid && alu1_v)) ; assign could_issue[g] = iqentry_v[g] && !iqentry_done[g] && !iqentry_out[g] && args_valid[g] && (iqentry_mem[g] ? !iqentry_agen[g] : 1'b1); end end endgenerate // The (old) simulator didn't handle the asynchronous race loop properly in the // original code. It would issue two instructions to the same islot. So the // issue logic has been re-written to eliminate the asynchronous loop. // Can't issue to the ALU if it's busy doing a long running operation like a // divide. always @*//(could_issue or head0 or head1 or head2 or head3 or head4 or head5 or head6 or head7) begin iqentry_issue = 8'h00; iqentry_islot[0] = 2'b00; iqentry_islot[1] = 2'b00; iqentry_islot[2] = 2'b00; iqentry_islot[3] = 2'b00; iqentry_islot[4] = 2'b00; iqentry_islot[5] = 2'b00; iqentry_islot[6] = 2'b00; iqentry_islot[7] = 2'b00; if (could_issue[head0] & !iqentry_fp[head0] & alu0_idle) begin iqentry_issue[head0] = `TRUE; iqentry_islot[head0] = 2'b00; end else if (could_issue[head1] & !iqentry_fp[head1] & alu0_idle && !(iqentry_v[head0] && iqentry_sync[head0])) begin iqentry_issue[head1] = `TRUE; iqentry_islot[head1] = 2'b00; end else if (could_issue[head2] & !iqentry_fp[head2] & alu0_idle && !(iqentry_v[head0] && iqentry_sync[head0]) && !(iqentry_v[head1] && iqentry_sync[head1]) ) begin iqentry_issue[head2] = `TRUE; iqentry_islot[head2] = 2'b00; end else if (could_issue[head3] & !iqentry_fp[head3] & alu0_idle && !(iqentry_v[head0] && iqentry_sync[head0]) && !(iqentry_v[head1] && iqentry_sync[head1]) && !(iqentry_v[head2] && iqentry_sync[head2]) ) begin iqentry_issue[head3] = `TRUE; iqentry_islot[head3] = 2'b00; end else if (could_issue[head4] & !iqentry_fp[head4] & alu0_idle && !(iqentry_v[head0] && iqentry_sync[head0]) && !(iqentry_v[head1] && iqentry_sync[head1]) && !(iqentry_v[head2] && iqentry_sync[head2]) && !(iqentry_v[head3] && iqentry_sync[head3]) ) begin iqentry_issue[head4] = `TRUE; iqentry_islot[head4] = 2'b00; end else if (could_issue[head5] & !iqentry_fp[head5] & alu0_idle && !(iqentry_v[head0] && iqentry_sync[head0]) && !(iqentry_v[head1] && iqentry_sync[head1]) && !(iqentry_v[head2] && iqentry_sync[head2]) && !(iqentry_v[head3] && iqentry_sync[head3]) && !(iqentry_v[head4] && iqentry_sync[head4]) ) begin iqentry_issue[head5] = `TRUE; iqentry_islot[head5] = 2'b00; end else if (could_issue[head6] & !iqentry_fp[head6] & alu0_idle && !(iqentry_v[head0] && iqentry_sync[head0]) && !(iqentry_v[head1] && iqentry_sync[head1]) && !(iqentry_v[head2] && iqentry_sync[head2]) && !(iqentry_v[head3] && iqentry_sync[head3]) && !(iqentry_v[head4] && iqentry_sync[head4]) && !(iqentry_v[head5] && iqentry_sync[head5]) ) begin iqentry_issue[head6] = `TRUE; iqentry_islot[head6] = 2'b00; end else if (could_issue[head7] & !iqentry_fp[head7] & alu0_idle && !(iqentry_v[head0] && iqentry_sync[head0]) && !(iqentry_v[head1] && iqentry_sync[head1]) && !(iqentry_v[head2] && iqentry_sync[head2]) && !(iqentry_v[head3] && iqentry_sync[head3]) && !(iqentry_v[head4] && iqentry_sync[head4]) && !(iqentry_v[head5] && iqentry_sync[head5]) && !(iqentry_v[head6] && iqentry_sync[head6]) ) begin iqentry_issue[head7] = `TRUE; iqentry_islot[head7] = 2'b00; end // Don't bother checking head0, it should have issued to the first // instruction. if (could_issue[head1] && !iqentry_fp[head1] && !iqentry_issue[head1] & alu1_idle && !fnIsAlu0Op(iqentry_op[head1],iqentry_fn[head1]) && !(iqentry_v[head0] && iqentry_sync[head0])) begin iqentry_issue[head1] = `TRUE; iqentry_islot[head1] = 2'b01; end else if (could_issue[head2] && !iqentry_fp[head2] && !iqentry_issue[head2] & alu1_idle && !fnIsAlu0Op(iqentry_op[head2],iqentry_fn[head2]) && !(iqentry_v[head0] && iqentry_sync[head0]) && !(iqentry_v[head1] && iqentry_sync[head1]) ) begin iqentry_issue[head2] = `TRUE; iqentry_islot[head2] = 2'b01; end else if (could_issue[head3] & !iqentry_fp[head3] && !iqentry_issue[head3] & alu1_idle && !fnIsAlu0Op(iqentry_op[head3],iqentry_fn[head3]) && !(iqentry_v[head0] && iqentry_sync[head0]) && !(iqentry_v[head1] && iqentry_sync[head1]) && !(iqentry_v[head2] && iqentry_sync[head2]) ) begin iqentry_issue[head3] = `TRUE; iqentry_islot[head3] = 2'b01; end else if (could_issue[head4] & !iqentry_fp[head4] && !iqentry_issue[head4] & alu1_idle && !fnIsAlu0Op(iqentry_op[head4],iqentry_fn[head4]) && !(iqentry_v[head0] && iqentry_sync[head0]) && !(iqentry_v[head1] && iqentry_sync[head1]) && !(iqentry_v[head2] && iqentry_sync[head2]) && !(iqentry_v[head3] && iqentry_sync[head3]) ) begin iqentry_issue[head4] = `TRUE; iqentry_islot[head4] = 2'b01; end else if (could_issue[head5] & !iqentry_fp[head5] && !iqentry_issue[head5] & alu1_idle && !fnIsAlu0Op(iqentry_op[head5],iqentry_fn[head5]) && !(iqentry_v[head0] && iqentry_sync[head0]) && !(iqentry_v[head1] && iqentry_sync[head1]) && !(iqentry_v[head2] && iqentry_sync[head2]) && !(iqentry_v[head3] && iqentry_sync[head3]) && !(iqentry_v[head4] && iqentry_sync[head4]) ) begin iqentry_issue[head5] = `TRUE; iqentry_islot[head5] = 2'b01; end else if (could_issue[head6] & !iqentry_fp[head6] && !iqentry_issue[head6] & alu1_idle && !fnIsAlu0Op(iqentry_op[head6],iqentry_fn[head6]) && !(iqentry_v[head0] && iqentry_sync[head0]) && !(iqentry_v[head1] && iqentry_sync[head1]) && !(iqentry_v[head2] && iqentry_sync[head2]) && !(iqentry_v[head3] && iqentry_sync[head3]) && !(iqentry_v[head4] && iqentry_sync[head4]) && !(iqentry_v[head5] && iqentry_sync[head5]) ) begin iqentry_issue[head6] = `TRUE; iqentry_islot[head6] = 2'b01; end else if (could_issue[head7] & !iqentry_fp[head7] && !iqentry_issue[head7] & alu1_idle && !fnIsAlu0Op(iqentry_op[head7],iqentry_fn[head7]) && !(iqentry_v[head0] && iqentry_sync[head0]) && !(iqentry_v[head1] && iqentry_sync[head1]) && !(iqentry_v[head2] && iqentry_sync[head2]) && !(iqentry_v[head3] && iqentry_sync[head3]) && !(iqentry_v[head4] && iqentry_sync[head4]) && !(iqentry_v[head5] && iqentry_sync[head5]) && !(iqentry_v[head6] && iqentry_sync[head6]) ) begin iqentry_issue[head7] = `TRUE; iqentry_islot[head7] = 2'b01; end end `ifdef FLOATING_POINT reg [3:0] fpispot; always @(could_issue or head0 or head1 or head2 or head3 or head4 or head5 or head6 or head7) begin iqentry_fpissue = 8'h00; iqentry_fpislot[0] = 2'b00; iqentry_fpislot[1] = 2'b00; iqentry_fpislot[2] = 2'b00; iqentry_fpislot[3] = 2'b00; iqentry_fpislot[4] = 2'b00; iqentry_fpislot[5] = 2'b00; iqentry_fpislot[6] = 2'b00; iqentry_fpislot[7] = 2'b00; fpispot = head0; if (could_issue[head0] & iqentry_fp[head0]) begin iqentry_fpissue[head0] = `TRUE; iqentry_fpislot[head0] = 2'b00; fpispot = head0; end else if (could_issue[head1] & iqentry_fp[head1] && !(iqentry_v[head0] && iqentry_sync[head0])) begin iqentry_fpissue[head1] = `TRUE; iqentry_fpislot[head1] = 2'b00; fpispot = head1; end else if (could_issue[head2] & iqentry_fp[head2] && !(iqentry_v[head0] && iqentry_sync[head0]) && !(iqentry_v[head1] && iqentry_sync[head1]) ) begin iqentry_fpissue[head2] = `TRUE; iqentry_fpislot[head2] = 2'b00; fpispot = head2; end else if (could_issue[head3] & iqentry_fp[head3] && !(iqentry_v[head0] && iqentry_sync[head0]) && !(iqentry_v[head1] && iqentry_sync[head1]) && !(iqentry_v[head2] && iqentry_sync[head2]) ) begin iqentry_fpissue[head3] = `TRUE; iqentry_fpislot[head3] = 2'b00; fpispot = head3; end else if (could_issue[head4] & iqentry_fp[head4] && !(iqentry_v[head0] && iqentry_sync[head0]) && !(iqentry_v[head1] && iqentry_sync[head1]) && !(iqentry_v[head2] && iqentry_sync[head2]) && !(iqentry_v[head3] && iqentry_sync[head3]) ) begin iqentry_fpissue[head4] = `TRUE; iqentry_fpislot[head4] = 2'b00; fpispot = head4; end else if (could_issue[head5] & iqentry_fp[head5] && !(iqentry_v[head0] && iqentry_sync[head0]) && !(iqentry_v[head1] && iqentry_sync[head1]) && !(iqentry_v[head2] && iqentry_sync[head2]) && !(iqentry_v[head3] && iqentry_sync[head3]) && !(iqentry_v[head4] && iqentry_sync[head4]) ) begin iqentry_fpissue[head5] = `TRUE; iqentry_fpislot[head5] = 2'b00; fpispot = head5; end else if (could_issue[head6] & iqentry_fp[head6] && !(iqentry_v[head0] && iqentry_sync[head0]) && !(iqentry_v[head1] && iqentry_sync[head1]) && !(iqentry_v[head2] && iqentry_sync[head2]) && !(iqentry_v[head3] && iqentry_sync[head3]) && !(iqentry_v[head4] && iqentry_sync[head4]) && !(iqentry_v[head5] && iqentry_sync[head5]) ) begin iqentry_fpissue[head6] = `TRUE; iqentry_fpislot[head6] = 2'b00; fpispot = head6; end else if (could_issue[head7] & iqentry_fp[head7] && !(iqentry_v[head0] && iqentry_sync[head0]) && !(iqentry_v[head1] && iqentry_sync[head1]) && !(iqentry_v[head2] && iqentry_sync[head2]) && !(iqentry_v[head3] && iqentry_sync[head3]) && !(iqentry_v[head4] && iqentry_sync[head4]) && !(iqentry_v[head5] && iqentry_sync[head5]) && !(iqentry_v[head6] && iqentry_sync[head6]) ) begin iqentry_fpissue[head7] = `TRUE; iqentry_fpislot[head7] = 2'b00; fpispot = head7; end else fpispot = 4'd8; end `endif // // additional logic for handling a branch miss (STOMP logic) // wire [QENTRIES-1:0] alu0_issue_; wire [QENTRIES-1:0] alu1_issue_; wire [QENTRIES-1:0] fp0_issue_; generate begin : stomp_logic assign iqentry_stomp[0] = branchmiss & (iqentry_v[0] && head0 != 3'd0 && ((missid == QENTRIES-1) || iqentry_stomp[QENTRIES-1])); for (g = 1; g < QENTRIES; g = g + 1) assign iqentry_stomp[g] = branchmiss & (iqentry_v[g] && head0 != g && ((missid == g-1) || iqentry_stomp[g-1])); for (g = 0; g < QENTRIES; g = g + 1) begin assign alu0_issue_[g] = (!(iqentry_v[g] && iqentry_stomp[g]) && iqentry_issue[g] && iqentry_islot[g]==2'd0); assign alu1_issue_[g] = (!(iqentry_v[g] && iqentry_stomp[g]) && iqentry_issue[g] && iqentry_islot[g]==2'd1); assign fp0_issue_[g] = (!(iqentry_v[g] && iqentry_stomp[g]) && iqentry_fpissue[g] && iqentry_islot[g]==2'd0); end end endgenerate assign alu0_issue = |alu0_issue_; assign alu1_issue = |alu1_issue_; `ifdef FLOATING_POINT assign fp0_issue = |fp0_issue_; `endif wire dcache_access_pending = dram0 == 3'd6 && (!rhit || (dram0_op==`LCL && dram0_tgt==7'd1)); // // determine if the instructions ready to issue can, in fact, issue. // "ready" means that the instruction has valid operands but has not gone yet // // Stores can only issue if there is no possibility of a change of program flow. // That means no flow control operations or instructions that can cause an // exception can be before the store. // ToDo: if debugging matches are enabled in theory any instruction could cause // a debug exception. The memory issue logic should check to see a debug address // match will occur, and avoid a store operation. It may be simpler to have stores // only occur if they are at the head of the queue if debugging matches are turned // on. assign iqentry_memissue_head0 = iqentry_memready[ head0 ] && cstate==IDLE && !dcache_access_pending && dram0==0; // first in line ... go as soon as ready assign iqentry_memissue_head1 = ~iqentry_stomp[head1] && iqentry_memready[ head1 ] // addr and data are valid // ... and no preceding instruction is ready to go && ~iqentry_memready[head0] // ... and there is no address-overlap with any preceding instruction && (!iqentry_mem[head0] || (iqentry_agen[head0] & iqentry_out[head0]) || (iqentry_a1_v[head0] && iqentry_a1[head1][DBW-1:3] != iqentry_a1[head0][DBW-1:3])) // ... and, if it is a SW, there is no chance of it being undone && (fnIsStore(iqentry_op[head1]) ? !fnIsFlowCtrl(iqentry_op[head0]) && !fnCanException(iqentry_op[head0],iqentry_fn[head0]) : `TRUE) && (!iqentry_cas[head1]) && !(iqentry_v[head0] && fnIsMem(iqentry_op[head0]) && iqentry_memdb[head0]) && !(iqentry_v[head0] && iqentry_memsb[head0]) && cstate==IDLE && !dcache_access_pending && dram0==0 ; assign iqentry_memissue_head2 = ~iqentry_stomp[head2] && iqentry_memready[ head2 ] // addr and data are valid // ... and no preceding instruction is ready to go && ~iqentry_memready[head0] && ~iqentry_memready[head1] // ... and there is no address-overlap with any preceding instruction && (!iqentry_mem[head0] || (iqentry_agen[head0] & iqentry_out[head0]) || (iqentry_a1_v[head0] && iqentry_a1[head2][DBW-1:3] != iqentry_a1[head0][DBW-1:3])) && (!iqentry_mem[head1] || (iqentry_agen[head1] & iqentry_out[head1]) || (iqentry_a1_v[head1] && iqentry_a1[head2][DBW-1:3] != iqentry_a1[head1][DBW-1:3])) // ... and, if it is a SW, there is no chance of it being undone && (fnIsStore(iqentry_op[head2]) ? !fnIsFlowCtrl(iqentry_op[head0]) && !fnCanException(iqentry_op[head0],iqentry_fn[head0]) && !fnIsFlowCtrl(iqentry_op[head1]) && !fnCanException(iqentry_op[head1],iqentry_fn[head1]) : `TRUE) && (!iqentry_cas[head2]) && !(iqentry_v[head0] && fnIsMem(iqentry_op[head0]) && iqentry_memdb[head0]) && !(iqentry_v[head1] && fnIsMem(iqentry_op[head1]) && iqentry_memdb[head1]) // ... and there is no instruction barrier && !(iqentry_v[head0] && iqentry_memsb[head0]) && !(iqentry_v[head1] && iqentry_memsb[head1]) && cstate==IDLE && !dcache_access_pending && dram0==0 ; // ( !fnIsFlowCtrl(iqentry_op[head0]) // && !fnIsFlowCtrl(iqentry_op[head1]))); assign iqentry_memissue_head3 = ~iqentry_stomp[head3] && iqentry_memready[ head3 ] // addr and data are valid // ... and no preceding instruction is ready to go && ~iqentry_memready[head0] && ~iqentry_memready[head1] && ~iqentry_memready[head2] // ... and there is no address-overlap with any preceding instruction && (!iqentry_mem[head0] || (iqentry_agen[head0] & iqentry_out[head0]) || (iqentry_a1_v[head0] && iqentry_a1[head3][DBW-1:3] != iqentry_a1[head0][DBW-1:3])) && (!iqentry_mem[head1] || (iqentry_agen[head1] & iqentry_out[head1]) || (iqentry_a1_v[head1] && iqentry_a1[head3][DBW-1:3] != iqentry_a1[head1][DBW-1:3])) && (!iqentry_mem[head2] || (iqentry_agen[head2] & iqentry_out[head2]) || (iqentry_a1_v[head2] && iqentry_a1[head3][DBW-1:3] != iqentry_a1[head2][DBW-1:3])) // ... and, if it is a SW, there is no chance of it being undone && (fnIsStore(iqentry_op[head3]) ? !fnIsFlowCtrl(iqentry_op[head0]) && !fnCanException(iqentry_op[head0],iqentry_fn[head0]) && !fnIsFlowCtrl(iqentry_op[head1]) && !fnCanException(iqentry_op[head1],iqentry_fn[head1]) && !fnIsFlowCtrl(iqentry_op[head2]) && !fnCanException(iqentry_op[head2],iqentry_fn[head2]) : `TRUE) && (!iqentry_cas[head3]) // ... and there is no memory barrier && !(iqentry_v[head0] && fnIsMem(iqentry_op[head0]) && iqentry_memdb[head0]) && !(iqentry_v[head1] && fnIsMem(iqentry_op[head1]) && iqentry_memdb[head1]) && !(iqentry_v[head2] && fnIsMem(iqentry_op[head2]) && iqentry_memdb[head2]) // ... and there is no instruction barrier && !(iqentry_v[head0] && iqentry_memsb[head0]) && !(iqentry_v[head1] && iqentry_memsb[head1]) && !(iqentry_v[head2] && iqentry_memsb[head2]) && cstate==IDLE && !dcache_access_pending && dram0==0 ; /* ( !fnIsFlowCtrl(iqentry_op[head0]) && !fnIsFlowCtrl(iqentry_op[head1]) && !fnIsFlowCtrl(iqentry_op[head2]))); */ assign iqentry_memissue_head4 = ~iqentry_stomp[head4] && iqentry_memready[ head4 ] // addr and data are valid // ... and no preceding instruction is ready to go && ~iqentry_memready[head0] && ~iqentry_memready[head1] && ~iqentry_memready[head2] && ~iqentry_memready[head3] // ... and there is no address-overlap with any preceding instruction && (!iqentry_mem[head0] || (iqentry_agen[head0] & iqentry_out[head0]) || (iqentry_a1_v[head0] && iqentry_a1[head4][DBW-1:3] != iqentry_a1[head0][DBW-1:3])) && (!iqentry_mem[head1] || (iqentry_agen[head1] & iqentry_out[head1]) || (iqentry_a1_v[head1] && iqentry_a1[head4][DBW-1:3] != iqentry_a1[head1][DBW-1:3])) && (!iqentry_mem[head2] || (iqentry_agen[head2] & iqentry_out[head2]) || (iqentry_a1_v[head2] && iqentry_a1[head4][DBW-1:3] != iqentry_a1[head2][DBW-1:3])) && (!iqentry_mem[head3] || (iqentry_agen[head3] & iqentry_out[head3]) || (iqentry_a1_v[head3] && iqentry_a1[head4][DBW-1:3] != iqentry_a1[head3][DBW-1:3])) // ... and, if it is a SW, there is no chance of it being undone && (fnIsStore(iqentry_op[head4]) ? !fnIsFlowCtrl(iqentry_op[head0]) && !fnCanException(iqentry_op[head0],iqentry_fn[head0]) && !fnIsFlowCtrl(iqentry_op[head1]) && !fnCanException(iqentry_op[head1],iqentry_fn[head1]) && !fnIsFlowCtrl(iqentry_op[head2]) && !fnCanException(iqentry_op[head2],iqentry_fn[head2]) && !fnIsFlowCtrl(iqentry_op[head3]) && !fnCanException(iqentry_op[head3],iqentry_fn[head3]) : `TRUE) && (!iqentry_cas[head4]) // ... and there is no memory barrier && !(iqentry_v[head0] && fnIsMem(iqentry_op[head0]) && iqentry_memdb[head0]) && !(iqentry_v[head1] && fnIsMem(iqentry_op[head1]) && iqentry_memdb[head1]) && !(iqentry_v[head2] && fnIsMem(iqentry_op[head2]) && iqentry_memdb[head2]) && !(iqentry_v[head3] && fnIsMem(iqentry_op[head3]) && iqentry_memdb[head3]) // ... and there is no instruction barrier && !(iqentry_v[head0] && iqentry_memsb[head0]) && !(iqentry_v[head1] && iqentry_memsb[head1]) && !(iqentry_v[head2] && iqentry_memsb[head2]) && !(iqentry_v[head3] && iqentry_memsb[head3]) && cstate==IDLE && !dcache_access_pending && dram0==0 ; /* || ( !fnIsFlowCtrl(iqentry_op[head0]) && !fnIsFlowCtrl(iqentry_op[head1]) && !fnIsFlowCtrl(iqentry_op[head2]) && !fnIsFlowCtrl(iqentry_op[head3]))); */ assign iqentry_memissue_head5 = ~iqentry_stomp[head5] && iqentry_memready[ head5 ] // addr and data are valid // ... and no preceding instruction is ready to go && ~iqentry_memready[head0] && ~iqentry_memready[head1] && ~iqentry_memready[head2] && ~iqentry_memready[head3] && ~iqentry_memready[head4] // ... and there is no address-overlap with any preceding instruction && (!iqentry_mem[head0] || (iqentry_agen[head0] & iqentry_out[head0]) || (iqentry_a1_v[head0] && iqentry_a1[head5][DBW-1:3] != iqentry_a1[head0][DBW-1:3])) && (!iqentry_mem[head1] || (iqentry_agen[head1] & iqentry_out[head1]) || (iqentry_a1_v[head1] && iqentry_a1[head5][DBW-1:3] != iqentry_a1[head1][DBW-1:3])) && (!iqentry_mem[head2] || (iqentry_agen[head2] & iqentry_out[head2]) || (iqentry_a1_v[head2] && iqentry_a1[head5][DBW-1:3] != iqentry_a1[head2][DBW-1:3])) && (!iqentry_mem[head3] || (iqentry_agen[head3] & iqentry_out[head3]) || (iqentry_a1_v[head3] && iqentry_a1[head5][DBW-1:3] != iqentry_a1[head3][DBW-1:3])) && (!iqentry_mem[head4] || (iqentry_agen[head4] & iqentry_out[head4]) || (iqentry_a1_v[head4] && iqentry_a1[head5][DBW-1:3] != iqentry_a1[head4][DBW-1:3])) // ... and, if it is a SW, there is no chance of it being undone && (fnIsStore(iqentry_op[head5]) ? !fnIsFlowCtrl(iqentry_op[head0]) && !fnCanException(iqentry_op[head0],iqentry_fn[head0]) && !fnIsFlowCtrl(iqentry_op[head1]) && !fnCanException(iqentry_op[head1],iqentry_fn[head1]) && !fnIsFlowCtrl(iqentry_op[head2]) && !fnCanException(iqentry_op[head2],iqentry_fn[head2]) && !fnIsFlowCtrl(iqentry_op[head3]) && !fnCanException(iqentry_op[head3],iqentry_fn[head3]) && !fnIsFlowCtrl(iqentry_op[head4]) && !fnCanException(iqentry_op[head4],iqentry_fn[head4]) : `TRUE) && (!iqentry_cas[head5]) // ... and there is no memory barrier && !(iqentry_v[head0] && fnIsMem(iqentry_op[head0]) && iqentry_memdb[head0]) && !(iqentry_v[head1] && fnIsMem(iqentry_op[head1]) && iqentry_memdb[head1]) && !(iqentry_v[head2] && fnIsMem(iqentry_op[head2]) && iqentry_memdb[head2]) && !(iqentry_v[head3] && fnIsMem(iqentry_op[head3]) && iqentry_memdb[head3]) && !(iqentry_v[head4] && fnIsMem(iqentry_op[head4]) && iqentry_memdb[head4]) // ... and there is no instruction barrier && !(iqentry_v[head0] && iqentry_memsb[head0]) && !(iqentry_v[head1] && iqentry_memsb[head1]) && !(iqentry_v[head2] && iqentry_memsb[head2]) && !(iqentry_v[head3] && iqentry_memsb[head3]) && !(iqentry_v[head4] && iqentry_memsb[head4]) && cstate==IDLE && !dcache_access_pending && dram0==0 ; /*|| ( !fnIsFlowCtrl(iqentry_op[head0]) && !fnIsFlowCtrl(iqentry_op[head1]) && !fnIsFlowCtrl(iqentry_op[head2]) && !fnIsFlowCtrl(iqentry_op[head3]) && !fnIsFlowCtrl(iqentry_op[head4]))); */ assign iqentry_memissue_head6 = ~iqentry_stomp[head6] && iqentry_memready[ head6 ] // addr and data are valid // ... and no preceding instruction is ready to go && ~iqentry_memready[head0] && ~iqentry_memready[head1] && ~iqentry_memready[head2] && ~iqentry_memready[head3] && ~iqentry_memready[head4] && ~iqentry_memready[head5] // ... and there is no address-overlap with any preceding instruction && (!iqentry_mem[head0] || (iqentry_agen[head0] & iqentry_out[head0]) || (iqentry_a1_v[head0] && iqentry_a1[head6][DBW-1:3] != iqentry_a1[head0][DBW-1:3])) && (!iqentry_mem[head1] || (iqentry_agen[head1] & iqentry_out[head1]) || (iqentry_a1_v[head1] && iqentry_a1[head6][DBW-1:3] != iqentry_a1[head1][DBW-1:3])) && (!iqentry_mem[head2] || (iqentry_agen[head2] & iqentry_out[head2]) || (iqentry_a1_v[head2] && iqentry_a1[head6][DBW-1:3] != iqentry_a1[head2][DBW-1:3])) && (!iqentry_mem[head3] || (iqentry_agen[head3] & iqentry_out[head3]) || (iqentry_a1_v[head3] && iqentry_a1[head6][DBW-1:3] != iqentry_a1[head3][DBW-1:3])) && (!iqentry_mem[head4] || (iqentry_agen[head4] & iqentry_out[head4]) || (iqentry_a1_v[head4] && iqentry_a1[head6][DBW-1:3] != iqentry_a1[head4][DBW-1:3])) && (!iqentry_mem[head5] || (iqentry_agen[head5] & iqentry_out[head5]) || (iqentry_a1_v[head5] && iqentry_a1[head6][DBW-1:3] != iqentry_a1[head5][DBW-1:3])) // ... and, if it is a SW, there is no chance of it being undone && (fnIsStore(iqentry_op[head6]) ? !fnIsFlowCtrl(iqentry_op[head0]) && !fnCanException(iqentry_op[head0],iqentry_fn[head0]) && !fnIsFlowCtrl(iqentry_op[head1]) && !fnCanException(iqentry_op[head1],iqentry_fn[head1]) && !fnIsFlowCtrl(iqentry_op[head2]) && !fnCanException(iqentry_op[head2],iqentry_fn[head2]) && !fnIsFlowCtrl(iqentry_op[head3]) && !fnCanException(iqentry_op[head3],iqentry_fn[head3]) && !fnIsFlowCtrl(iqentry_op[head4]) && !fnCanException(iqentry_op[head4],iqentry_fn[head4]) && !fnIsFlowCtrl(iqentry_op[head5]) && !fnCanException(iqentry_op[head5],iqentry_fn[head5]) : `TRUE) && (!iqentry_cas[head6]) // ... and there is no memory barrier && !(iqentry_v[head0] && fnIsMem(iqentry_op[head0]) && iqentry_memdb[head0]) && !(iqentry_v[head1] && fnIsMem(iqentry_op[head1]) && iqentry_memdb[head1]) && !(iqentry_v[head2] && fnIsMem(iqentry_op[head2]) && iqentry_memdb[head2]) && !(iqentry_v[head3] && fnIsMem(iqentry_op[head3]) && iqentry_memdb[head3]) && !(iqentry_v[head4] && fnIsMem(iqentry_op[head4]) && iqentry_memdb[head4]) && !(iqentry_v[head5] && fnIsMem(iqentry_op[head5]) && iqentry_memdb[head5]) // ... and there is no instruction barrier && !(iqentry_v[head0] && iqentry_memsb[head0]) && !(iqentry_v[head1] && iqentry_memsb[head1]) && !(iqentry_v[head2] && iqentry_memsb[head2]) && !(iqentry_v[head3] && iqentry_memsb[head3]) && !(iqentry_v[head4] && iqentry_memsb[head4]) && !(iqentry_v[head5] && iqentry_memsb[head5]) && cstate==IDLE && !dcache_access_pending && dram0==0 ; /*|| ( !fnIsFlowCtrl(iqentry_op[head0]) && !fnIsFlowCtrl(iqentry_op[head1]) && !fnIsFlowCtrl(iqentry_op[head2]) && !fnIsFlowCtrl(iqentry_op[head3]) && !fnIsFlowCtrl(iqentry_op[head4]) && !fnIsFlowCtrl(iqentry_op[head5]))); */ assign iqentry_memissue_head7 = ~iqentry_stomp[head7] && iqentry_memready[ head7 ] // addr and data are valid // ... and no preceding instruction is ready to go && ~iqentry_memready[head0] && ~iqentry_memready[head1] && ~iqentry_memready[head2] && ~iqentry_memready[head3] && ~iqentry_memready[head4] && ~iqentry_memready[head5] && ~iqentry_memready[head6] // ... and there is no address-overlap with any preceding instruction && (!iqentry_mem[head0] || (iqentry_agen[head0] & iqentry_out[head0]) || (iqentry_a1_v[head0] && iqentry_a1[head7][DBW-1:3] != iqentry_a1[head0][DBW-1:3])) && (!iqentry_mem[head1] || (iqentry_agen[head1] & iqentry_out[head1]) || (iqentry_a1_v[head1] && iqentry_a1[head7][DBW-1:3] != iqentry_a1[head1][DBW-1:3])) && (!iqentry_mem[head2] || (iqentry_agen[head2] & iqentry_out[head2]) || (iqentry_a1_v[head2] && iqentry_a1[head7][DBW-1:3] != iqentry_a1[head2][DBW-1:3])) && (!iqentry_mem[head3] || (iqentry_agen[head3] & iqentry_out[head3]) || (iqentry_a1_v[head3] && iqentry_a1[head7][DBW-1:3] != iqentry_a1[head3][DBW-1:3])) && (!iqentry_mem[head4] || (iqentry_agen[head4] & iqentry_out[head4]) || (iqentry_a1_v[head4] && iqentry_a1[head7][DBW-1:3] != iqentry_a1[head4][DBW-1:3])) && (!iqentry_mem[head5] || (iqentry_agen[head5] & iqentry_out[head5]) || (iqentry_a1_v[head5] && iqentry_a1[head7][DBW-1:3] != iqentry_a1[head5][DBW-1:3])) && (!iqentry_mem[head6] || (iqentry_agen[head6] & iqentry_out[head6]) || (iqentry_a1_v[head6] && iqentry_a1[head7][DBW-1:3] != iqentry_a1[head6][DBW-1:3])) // ... and, if it is a SW, there is no chance of it being undone && (fnIsStore(iqentry_op[head7]) ? !fnIsFlowCtrl(iqentry_op[head0]) && !fnCanException(iqentry_op[head0],iqentry_fn[head0]) && !fnIsFlowCtrl(iqentry_op[head1]) && !fnCanException(iqentry_op[head1],iqentry_fn[head1]) && !fnIsFlowCtrl(iqentry_op[head2]) && !fnCanException(iqentry_op[head2],iqentry_fn[head2]) && !fnIsFlowCtrl(iqentry_op[head3]) && !fnCanException(iqentry_op[head3],iqentry_fn[head3]) && !fnIsFlowCtrl(iqentry_op[head4]) && !fnCanException(iqentry_op[head4],iqentry_fn[head4]) && !fnIsFlowCtrl(iqentry_op[head5]) && !fnCanException(iqentry_op[head5],iqentry_fn[head5]) && !fnIsFlowCtrl(iqentry_op[head6]) && !fnCanException(iqentry_op[head6],iqentry_fn[head6]) : `TRUE) && (!iqentry_cas[head7]) // ... and there is no memory barrier && !(iqentry_v[head0] && fnIsMem(iqentry_op[head0]) && iqentry_memdb[head0]) && !(iqentry_v[head1] && fnIsMem(iqentry_op[head1]) && iqentry_memdb[head1]) && !(iqentry_v[head2] && fnIsMem(iqentry_op[head2]) && iqentry_memdb[head2]) && !(iqentry_v[head3] && fnIsMem(iqentry_op[head3]) && iqentry_memdb[head3]) && !(iqentry_v[head4] && fnIsMem(iqentry_op[head4]) && iqentry_memdb[head4]) && !(iqentry_v[head5] && fnIsMem(iqentry_op[head5]) && iqentry_memdb[head5]) && !(iqentry_v[head6] && fnIsMem(iqentry_op[head6]) && iqentry_memdb[head6]) // ... and there is no instruction barrier && !(iqentry_v[head0] && iqentry_memsb[head0]) && !(iqentry_v[head1] && iqentry_memsb[head1]) && !(iqentry_v[head2] && iqentry_memsb[head2]) && !(iqentry_v[head3] && iqentry_memsb[head3]) && !(iqentry_v[head4] && iqentry_memsb[head4]) && !(iqentry_v[head5] && iqentry_memsb[head5]) && !(iqentry_v[head6] && iqentry_memsb[head6]) && cstate==IDLE && !dcache_access_pending && dram0==0 ; `include "Thor_execute_combo.v" //`include "Thor_memory_combo.v" // additional DRAM-enqueue logic Thor_TLB #(DBW) utlb1 ( .rst(rst_i), .clk(clk), .km(km), .pc(spc), .ea(dram0_addr), .ppc(ppc), .pea(pea), .iuncached(iuncached), .uncached(uncached), .m1IsStore(we_o), .ASID(asid), .op(tlb_op), .state(tlb_state), .regno(tlb_regno), .dati(tlb_data), .dato(tlb_dato), .ITLBMiss(ITLBMiss), .DTLBMiss(DTLBMiss), .HTLBVirtPageo() ); assign dram_avail = (dram0 == `DRAMSLOT_AVAIL || dram1 == `DRAMSLOT_AVAIL || dram2 == `DRAMSLOT_AVAIL); generate begin : memr for (g = 0; g < QENTRIES; g = g + 1) begin assign iqentry_memopsvalid[g] = (iqentry_mem[g] & iqentry_a2_v[g] & iqentry_a3_v[g] & iqentry_agen[g] & iqentry_T_v[g]); assign iqentry_memready[g] = (iqentry_v[g] & iqentry_memopsvalid[g] & ~iqentry_memissue[g] /*& !iqentry_issue[g]*/ & ~iqentry_done[g] & ~iqentry_out[g] & ~iqentry_stomp[g]); end end endgenerate /* assign iqentry_memready[0] = (iqentry_v[0] & iqentry_memopsvalid[0] & ~iqentry_memissue[0] & ~iqentry_done[0] & ~iqentry_out[0] & ~iqentry_stomp[0]), */ assign outstanding_stores = (dram0 && fnIsStore(dram0_op)) || (dram1 && fnIsStore(dram1_op)) || (dram2 && fnIsStore(dram2_op)); // This signal needed to stave off an instruction cache access. assign mem_issue = iqentry_memissue_head0 | iqentry_memissue_head1 | iqentry_memissue_head2 | iqentry_memissue_head3 | iqentry_memissue_head4 | iqentry_memissue_head5 | iqentry_memissue_head6 | iqentry_memissue_head7 ; // Nybble slices for predicate register forwarding wire [3:0] alu0nyb[0:15]; wire [3:0] alu1nyb[0:15]; wire [3:0] cmt0nyb[0:15]; wire [3:0] cmt1nyb[0:15]; generate begin : nybs for (g = 0; g < DBW/4; g = g + 1) begin assign alu0nyb[g] = alu0_bus[g*4+3:g*4]; assign alu1nyb[g] = alu1_bus[g*4+3:g*4]; assign cmt0nyb[g] = commit0_bus[g*4+3:g*4]; assign cmt1nyb[g] = commit1_bus[g*4+3:g*4]; end end endgenerate //`include "Thor_commit_combo.v" assign commit0_v = ({iqentry_v[head0], iqentry_done[head0]} == 2'b11 && ~|panic); assign commit1_v = ({iqentry_v[head0], iqentry_done[head0]} != 2'b10 && {iqentry_v[head1], iqentry_done[head1]} == 2'b11 && ~|panic); assign commit0_id = {iqentry_mem[head0], head0}; // if a memory op, it has a DRAM-bus id assign commit1_id = {iqentry_mem[head1], head1}; // if a memory op, it has a DRAM-bus id assign commit0_tgt = iqentry_tgt[head0]; assign commit1_tgt = iqentry_tgt[head1]; assign commit0_bus = iqentry_res[head0]; assign commit1_bus = iqentry_res[head1]; // If the target register is code address register #13 or #11 (0Dh) then we really wanted a SYS not an INT. // The difference is that and INT returns to the interrupted instruction, and a SYS returns to the // next instruction. In the case of hardware determined software exceptions we want to be able to // return to the interrupted instruction, hence an INT is forced targeting code address reg #13. assign int_commit = (iqentry_op[head0]==`INT && commit0_v && iqentry_tgt[head0][3:0]==4'hE) || (commit0_v && iqentry_op[head1]==`INT && commit1_v && iqentry_tgt[head1][3:0]==4'hE); assign sys_commit = ((iqentry_op[head0]==`SYS || (iqentry_op[head0]==`INT && (iqentry_tgt[head0][3:0]==4'hD || iqentry_tgt[head0][3:0]==4'hB))) && commit0_v) || (commit0_v && (iqentry_op[head1]==`SYS || (iqentry_op[head1]==`INT && (iqentry_tgt[head1][3:0]==4'hD || iqentry_tgt[head1][3:0]==4'hB))) && commit1_v); `ifdef DEBUG_LOGIC assign dbg_commit = (((iqentry_op[head0]==`SYS && iqentry_tgt[head0][3:0]==4'hB) || (iqentry_op[head0]==`INT && (iqentry_tgt[head0][3:0]==4'hB))) && commit0_v) || (commit0_v && ((iqentry_op[head1]==`SYS && iqentry_tgt[head1][3:0]==4'hB)|| (iqentry_op[head1]==`INT && (iqentry_tgt[head1][3:0]==4'hB))) && commit1_v); `endif always @(posedge clk) if (rst_i) tick <= 64'd0; else tick <= tick + 64'd1; always @(posedge clk) if (rst_i) nmi1 <= 1'b0; else nmi1 <= nmi_i; //----------------------------------------------------------------------------- // Clock control // - reset or NMI reenables the clock // - this circuit must be under the clk_i domain //----------------------------------------------------------------------------- // reg cpu_clk_en; reg [15:0] clk_throttle; reg [15:0] clk_throttle_new; reg ld_clk_throttle; //BUFGCE u20 (.CE(cpu_clk_en), .I(clk_i), .O(clk) ); reg lct1; always @(posedge clk_i) if (rst_i) begin cpu_clk_en <= 1'b1; lct1 <= 1'b0; clk_throttle <= STARTUP_POWER; // 50% power end else begin lct1 <= ld_clk_throttle; clk_throttle <= {clk_throttle[14:0],clk_throttle[15]}; if (ld_clk_throttle && !lct1) begin clk_throttle <= clk_throttle_new; end if (nmi_i) clk_throttle <= STARTUP_POWER; cpu_clk_en <= clk_throttle[15]; end // Clock throttling bypassed for now assign clk_o = clk; assign clk = clk_i; //----------------------------------------------------------------------------- // Note that everything clocked has to be in the same always block. This is a // limitation of some toolsets. Simulation / synthesis may get confused if the // logic isn't placed in the same always block. //----------------------------------------------------------------------------- always @(posedge clk) begin if (nmi_i & !nmi1) nmi_edge <= 1'b1; ld_clk_throttle <= `FALSE; dram_v <= `INV; alu0_ld <= 1'b0; alu1_ld <= 1'b0; `ifdef FLOATING_POINT fp0_ld <= 1'b0; `endif // Interrupt enable countdown delay. if (imcd!=6'h3f) imcd <= {imcd[4:0],1'b0}; if (imcd==6'd0) begin im <= 1'b0; imcd <= 6'h3f; end mem_stringmiss <= `FALSE; if (mem_stringmissx) begin mem_stringmiss <= `TRUE; // dram0_op <= `NOP; // clears string miss end ic_invalidate <= `FALSE; dc_invalidate <= `FALSE; ic_invalidate_line <= `FALSE; dc_invalidate_line <= `FALSE; alu0_dataready <= `FALSE; alu1_dataready <= `FALSE; // Reset segmentation flag once operating in non-segmented area. if (pc[ABW-1:ABW-4]==4'hF) pc[ABW] <= 1'b0; if (rst_i) cstate <= RESET1; if (rst_i||cstate==RESET1||cstate==RESET2) begin imcd <= 6'h3F; wb_nack(); `ifdef PCHIST pc_cap <= `TRUE; `endif ierr <= 1'b0; GM <= 8'hFF; nmi_edge <= 1'b0; pc <= RSTPC[ABW-1:0]; StatusHWI <= `TRUE; // disables interrupts at startup until an RTI instruction is executed. im <= 1'b1; imb <= 1'b1; ic_invalidate <= `TRUE; dc_invalidate <= `TRUE; fetchbuf <= 1'b0; fetchbufA_v <= `INV; fetchbufB_v <= `INV; fetchbufC_v <= `INV; fetchbufD_v <= `INV; fetchbufA_instr <= {8{8'h10}}; fetchbufB_instr <= {8{8'h10}}; fetchbufC_instr <= {8{8'h10}}; fetchbufD_instr <= {8{8'h10}}; fetchbufA_pc <= {{DBW-4{1'b1}},4'h0}; fetchbufB_pc <= {{DBW-4{1'b1}},4'h0}; fetchbufC_pc <= {{DBW-4{1'b1}},4'h0}; fetchbufD_pc <= {{DBW-4{1'b1}},4'h0}; for (i=0; i< QENTRIES; i=i+1) begin iqentry_v[i] <= `INV; iqentry_agen[i] <= `FALSE; iqentry_op[i] <= `NOP; iqentry_memissue[i] <= `FALSE; iqentry_a1[i] <= 64'd0; iqentry_a2[i] <= 64'd0; iqentry_a3[i] <= 64'd0; iqentry_T[i] <= 64'd0; iqentry_a1_v[i] <= `INV; iqentry_a2_v[i] <= `INV; iqentry_a3_v[i] <= `INV; iqentry_T_v[i] <= `INV; iqentry_a1_s[i] <= 4'd0; iqentry_a2_s[i] <= 4'd0; iqentry_a3_s[i] <= 4'd0; iqentry_T_s[i] <= 4'd0; end // All the register are flagged as valid on startup even though they // may not contain valid data. Otherwise the processor will stall // waiting for the registers to become valid. Ideally the registers // should be initialized with valid values before use. But who knows // what someone will do in boot code and we don't want the processor // to stall. for (n = 1; n < NREGS; n = n + 1) begin rf_v[n] = `VAL; `ifdef SIMULATION rf_source[n] <= 4'd0; `endif dbg_ctrl <= {DBW{1'b0}}; `ifdef SIMULATION dbg_adr0 <= 0; dbg_adr1 <= 0; dbg_adr2 <= 0; dbg_adr3 <= 0; `endif end if (ABW==32) sregs_lmt[7] = 20'hFFFFF; else sregs_lmt[7] = 52'hFFFFFFFFFFFFF; rf_source[0] <= 4'd0; // rf_v[0] = `VAL; // rf_v[7'h50] = `VAL; // rf_v[7'h5F] = `VAL; alu0_available <= `TRUE; alu1_available <= `TRUE; reset_tail_pointers(1); head0 <= 3'd0; head1 <= 3'd1; head2 <= 3'd2; head3 <= 3'd3; head4 <= 3'd4; head5 <= 3'd5; head6 <= 3'd6; head7 <= 3'd7; dram0 <= 3'b00; dram1 <= 3'b00; dram2 <= 3'b00; tlb_state <= 3'd0; panic <= `PANIC_NONE; string_pc <= 64'd0; // The pc wraps around to address zero while fetching the reset vector. // This causes the processor to use the code segement register so the // CS has to be defined for reset. sregs[7] <= RSTCSEG; for (i=0; i < 16; i=i+1) pregs[i] <= 4'd0; asid <= 8'h00; rrmapno <= 3'd0; dram0_id <= 0; alu1_sourceid <= 0; end // The following registers are always valid rf_v[7'h00] = `VAL; rf_v[7'h50] = `VAL; // C0 rf_v[7'h5F] = `VAL; // C15 (PC) rf_v[7'h72] = `VAL; // tick queued1 = `FALSE; queued2 = `FALSE; allowq = `TRUE; dbg_stat <= dbg_stat | dbg_stat1x; did_branchback <= take_branch; did_branchback0 <= take_branch0; did_branchback1 <= take_branch1; `include "Thor_Retarget.v" /* if (branchmiss) begin for (n = 1; n < NREGS; n = n + 1) if (rf_v[n] == `INV && ~livetarget[n]) begin $display("brmiss: rf_v[%d] <= VAL",n); rf_v[n] = `VAL; end if (|iqentry_0_latestID[NREGS:1]) rf_source[ iqentry_tgt[0] ] <= { iqentry_mem[0], 3'd0 }; if (|iqentry_1_latestID[NREGS:1]) rf_source[ iqentry_tgt[1] ] <= { iqentry_mem[1], 3'd1 }; if (|iqentry_2_latestID[NREGS:1]) rf_source[ iqentry_tgt[2] ] <= { iqentry_mem[2], 3'd2 }; if (|iqentry_3_latestID[NREGS:1]) rf_source[ iqentry_tgt[3] ] <= { iqentry_mem[3], 3'd3 }; if (|iqentry_4_latestID[NREGS:1]) rf_source[ iqentry_tgt[4] ] <= { iqentry_mem[4], 3'd4 }; if (|iqentry_5_latestID[NREGS:1]) rf_source[ iqentry_tgt[5] ] <= { iqentry_mem[5], 3'd5 }; if (|iqentry_6_latestID[NREGS:1]) rf_source[ iqentry_tgt[6] ] <= { iqentry_mem[6], 3'd6 }; if (|iqentry_7_latestID[NREGS:1]) rf_source[ iqentry_tgt[7] ] <= { iqentry_mem[7], 3'd7 }; end */ if (ihit) begin $display("\r\n"); $display("TIME %0d", $time); end // COMMIT PHASE (register-file update only ... dequeue is elsewhere) // // look at head0 and head1 and let 'em write the register file if they are ready // // why is it happening here and not in another phase? // want to emulate a pass-through register file ... i.e. if we are reading // out of r3 while writing to r3, the value read is the value written. // requires BLOCKING assignments, so that we can read from rf[i] later. // if (commit0_v) begin if (!rf_v[ commit0_tgt ]) begin rf_v[ commit0_tgt ] = (rf_source[ commit0_tgt ] == commit0_id) || ((branchmiss) && iqentry_source[ commit0_id[2:0] ]); end if (commit0_tgt != 7'd0) $display("r%d <- %h", commit0_tgt, commit0_bus); end if (commit1_v) begin if (!rf_v[ commit1_tgt ]) begin rf_v[ commit1_tgt ] = (rf_source[ commit1_tgt ] == commit1_id)|| ((branchmiss) && iqentry_source[ commit1_id[2:0] ]); end if (commit1_tgt != 7'd0) $display("r%d <- %h", commit1_tgt, commit1_bus); end // This chunk of code has to be before the enqueue stage so that the agen bit // can be reset to zero by enqueue. // put results into the appropriate instruction entries // if ((alu0_op==`RR && (alu0_fn==`MUL || alu0_fn==`MULU)) || alu0_op==`MULI || alu0_op==`MULUI) begin if (alu0_done) begin alu0_dataready <= `TRUE; end end else if ((alu0_op==`RR && (alu0_fn==`DIV || alu0_fn==`DIVU || alu0_fn==`MOD || alu0_fn==`MODU)) || alu0_op==`DIVI || alu0_op==`DIVUI || alu0_op==`MODI || alu0_op==`MODUI) begin if (alu0_done) begin alu0_dataready <= `TRUE; end end if (alu0_v) begin if (|alu0_exc) set_exception(alu0_id, alu0_exc==`EXC_PRIV ? 8'd245 : alu0_exc==`EXC_DBZ ? 8'd241 : alu0_exc==`EXC_CHK ? 8'd239 : 8'h00); else begin if (iqentry_op[alu0_id[2:0]]!=`IMM) iqentry_done[ alu0_id[2:0] ] <= (!iqentry_mem[ alu0_id[2:0] ] || !alu0_cmt); if (iqentry_jmpi[alu0_id[2:0]] && alu0_cmt) iqentry_res [alu0_id[2:0]] <= alu0_pc + alu0_insnsz; else iqentry_res [ alu0_id[2:0] ] <= alu0_bus; iqentry_out [ alu0_id[2:0] ] <= `FALSE; iqentry_cmt [ alu0_id[2:0] ] <= alu0_cmt; iqentry_agen[ alu0_id[2:0] ] <= `TRUE; end end if (((alu1_op==`RR && (alu1_fn==`MUL || alu1_fn==`MULU)) || alu1_op==`MULI || alu1_op==`MULUI) && ALU1BIG) begin if (alu1_done) begin alu1_dataready <= `TRUE; end end else if (((alu1_op==`RR && (alu1_fn==`DIV || alu1_fn==`DIVU || alu1_fn==`MOD || alu1_fn==`MODU)) || alu1_op==`DIVI || alu1_op==`DIVUI || alu1_op==`MODI || alu1_op==`MODUI) && ALU1BIG) begin if (alu1_done) begin alu1_dataready <= `TRUE; end end if (alu1_v) begin if (|alu1_exc) set_exception(alu1_id, alu1_exc==`EXC_PRIV ? 8'd245 : alu1_exc==`EXC_DBZ ? 8'd241 : alu1_exc==`EXC_CHK ? 8'd239 : 8'h00); else begin if (iqentry_op[alu1_id[2:0]]!=`IMM) iqentry_done[ alu1_id[2:0] ] <= (!iqentry_mem[ alu1_id[2:0] ] || !alu1_cmt); if (iqentry_jmpi[alu1_id[2:0]] && alu1_cmt) iqentry_res [alu1_id[2:0]] <= alu1_pc + alu1_insnsz; else iqentry_res [ alu1_id[2:0] ] <= alu1_bus; iqentry_out [ alu1_id[2:0] ] <= `FALSE; iqentry_cmt [ alu1_id[2:0] ] <= alu1_cmt; iqentry_agen[ alu1_id[2:0] ] <= `TRUE; end end `ifdef FLOATING_POINT if (fp0_v) begin $display("0results to iq[%d]=%h", fp0_id[2:0],fp0_bus); if (|fp0_exc) set_exception(fp0_id, fp0_exc); else begin iqentry_res [ fp0_id[2:0] ] <= fp0_bus; iqentry_done[ fp0_id[2:0] ] <= fp0_done || !fp0_cmt; iqentry_out [ fp0_id[2:0] ] <= `FALSE; iqentry_cmt [ fp0_id[2:0] ] <= fp0_cmt; iqentry_agen[ fp0_id[2:0] ] <= `TRUE; end end `endif //------------------------------------------------------------------------------- // ENQUEUE // // place up to three instructions from the fetch buffer into slots in the IQ. // note: they are placed in-order, and they are expected to be executed // 0, 1, or 2 of the fetch buffers may have valid data // 0, 1, or 2 slots in the instruction queue may be available. // if we notice that one of the instructions in the fetch buffer is a predicted // branch, (set branchback/backpc and delete any instructions after it in // fetchbuf) // // We place the queue logic before the fetch to allow the tools to do the work // for us. The fetch logic needs to know how many entries were queued, this is // tracked in the queue stage by variables queued1,queued2,queued3. Blocking // assignments are used for these vars. //------------------------------------------------------------------------------- // exception_set = `FALSE; queued1 = `FALSE; queued2 = `FALSE; allowq = `TRUE; qstomp = `FALSE; if (branchmiss) // don't bother doing anything if there's been a branch miss reset_tail_pointers(0); else begin case ({fetchbuf0_v, fetchbuf1_v && fnNumReadPorts(fetchbuf1_instr) <= ports_avail}) 2'b00: ; // do nothing 2'b01: enque1(tail0,1,0,1); 2'b10: enque0(tail0,1,0,1); 2'b11: begin enque0(tail0,1,1,1); if (allowq) enque1(tail1,2,0,0); validate_args(); end endcase end //------------------------------------------------------------------------------ // FETCH // // fetch at least two instructions from memory into the fetch buffer unless // either one of the buffers is still full, in which case we do nothing (kinda // like alpha approach) //------------------------------------------------------------------------------ // if (branchmiss) begin $display("pc <= %h", misspc); pc <= misspc; fetchbuf <= 1'b0; fetchbufA_v <= 1'b0; fetchbufB_v <= 1'b0; fetchbufC_v <= 1'b0; fetchbufD_v <= 1'b0; end else if (take_branch) begin if (fetchbuf == 1'b0) begin case ({fetchbufA_v,fetchbufB_v,fetchbufC_v,fetchbufD_v}) 4'b0000: begin fetchCD(); if (do_pcinc) pc[31:0] <= pc[31:0] + fnInsnLength(insn) + fnInsnLength1(insn); fetchbuf <= 1'b1; end 4'b0100: begin fetchCD(); if (do_pcinc) pc[31:0] <= pc[31:0] + fnInsnLength(insn) + fnInsnLength1(insn); fetchbufB_v <= !queued1; if (queued1) begin fetchbufB_instr <= 64'd0; fetchbuf <= 1'b1; end if (queued2|queued3) panic <= `PANIC_INVALIDIQSTATE; end 4'b0111: begin fetchbufB_v <= !queued1; if (queued1) begin fetchbuf <= 1'b1; fetchbufB_instr <= 64'd0; end if (queued2|queued3) panic <= `PANIC_INVALIDIQSTATE; end 4'b1000: begin fetchCD(); if (do_pcinc) pc[31:0] <= pc[31:0] + fnInsnLength(insn) + fnInsnLength1(insn); fetchbufA_v <= !queued1; if (queued1) begin fetchbuf <= 1'b1; fetchbufA_instr <= 64'd0; end if (queued2|queued3) panic <= `PANIC_INVALIDIQSTATE; end 4'b1011: begin fetchbufA_v <= !queued1; if (queued1) begin fetchbuf <= 1'b1; fetchbufB_instr <= 64'd0; end if (queued2|queued3) panic <= `PANIC_INVALIDIQSTATE; end 4'b1100: // Note that there is no point to loading C,D here because // there is a predicted taken branch that would stomp on the // instructions anyways. if ((fnIsBranch(opcodeA) && predict_takenBr)||opcodeA==`LOOP) begin pc <= branch_pc; fetchbufA_v <= !(queued1|queued2); fetchbufB_v <= `INV; // stomp on it // may as well stick with same fetchbuf end else begin if (did_branchback0) begin fetchCD(); if (do_pcinc) pc[31:0] <= pc[31:0] + fnInsnLength(insn) + fnInsnLength1(insn); fetchbufA_v <= !(queued1|queued2); fetchbufB_v <= !queued2; if (queued2) fetchbuf <= 1'b1; end else begin pc[ABW-1:0] <= branch_pc; fetchbufA_v <= !(queued1|queued2); fetchbufB_v <= !queued2; // may as well keep the same fetchbuffer end end 4'b1111: begin fetchbufA_v <= !(queued1|queued2); fetchbufB_v <= !queued2; if (queued2) begin fetchbuf <= 1'b1; fetchbufA_instr <= 64'd0; fetchbufB_instr <= 64'd0; end end default: panic <= `PANIC_INVALIDFBSTATE; endcase end else begin // fetchbuf==1'b1 case ({fetchbufC_v,fetchbufD_v,fetchbufA_v,fetchbufB_v}) 4'b0000: begin fetchAB(); if (do_pcinc) pc[31:0] <= pc[31:0] + fnInsnLength(insn) + fnInsnLength1(insn); fetchbuf <= 1'b0; end 4'b0100: begin fetchAB(); if (do_pcinc) pc[31:0] <= pc[31:0] + fnInsnLength(insn) + fnInsnLength1(insn); fetchbufD_v <= !queued1; if (queued1) fetchbuf <= 1'b0; if (queued2|queued3) panic <= `PANIC_INVALIDIQSTATE; end 4'b0111: begin fetchbufD_v <= !queued1; if (queued1) fetchbuf <= 1'b0; if (queued2|queued3) panic <= `PANIC_INVALIDIQSTATE; end 4'b1000: begin fetchAB(); if (do_pcinc) pc[31:0] <= pc[31:0] + fnInsnLength(insn) + fnInsnLength1(insn); fetchbufC_v <= !queued1; if (queued1) fetchbuf <= 1'b0; if (queued2|queued3) panic <= `PANIC_INVALIDIQSTATE; end 4'b1011: begin fetchbufC_v <= !queued1; if (queued1) fetchbuf <= 1'b0; if (queued2|queued3) panic <= `PANIC_INVALIDIQSTATE; end 4'b1100: if ((fnIsBranch(opcodeC) && predict_takenBr)||opcodeC==`LOOP) begin pc <= branch_pc; fetchbufC_v <= !(queued1|queued2); fetchbufD_v <= `INV; // stomp on it // may as well stick with same fetchbuf end else begin if (did_branchback1) begin fetchAB(); if (do_pcinc) pc[31:0] <= pc[31:0] + fnInsnLength(insn) + fnInsnLength1(insn); fetchbufC_v <= !(queued1|queued2); fetchbufD_v <= !queued2; if (queued2) fetchbuf <= 1'b0; end else begin pc[ABW-1:0] <= branch_pc; fetchbufC_v <= !(queued1|queued2); fetchbufD_v <= !queued2; // may as well keep the same fetchbuffer end end 4'b1111: begin fetchbufC_v <= !(queued1|queued2); fetchbufD_v <= !queued2; if (queued2) fetchbuf <= 1'b0; end default: panic <= `PANIC_INVALIDFBSTATE; endcase end end else begin if (fetchbuf == 1'b0) case ({fetchbufA_v, fetchbufB_v}) 2'b00: ; 2'b01: begin fetchbufB_v <= !(queued2|queued1); fetchbuf <= queued2|queued1; end 2'b10: begin fetchbufA_v <= !(queued2|queued1); fetchbuf <= queued2|queued1; end 2'b11: begin fetchbufA_v <= !(queued1|queued2); fetchbufB_v <= !queued2; fetchbuf <= queued2; end endcase else case ({fetchbufC_v, fetchbufD_v}) 2'b00: ; 2'b01: begin fetchbufD_v <= !(queued2|queued1); fetchbuf <= !(queued2|queued1); end 2'b10: begin fetchbufC_v <= !(queued2|queued1); fetchbuf <= !(queued2|queued1); end 2'b11: begin fetchbufC_v <= !(queued2|queued1); fetchbufD_v <= !queued2; fetchbuf <= !queued2; end endcase if (fetchbufA_v == `INV && fetchbufB_v == `INV) begin fetchAB(); if (do_pcinc) pc[31:0] <= pc[31:0] + fnInsnLength(insn) + fnInsnLength1(insn); // fetchbuf steering logic correction if (fetchbufC_v==`INV && fetchbufD_v==`INV && do_pcinc) fetchbuf <= 1'b0; $display("hit %b 1pc <= %h", do_pcinc, pc[31:0] + fnInsnLength(insn) + fnInsnLength1(insn)); end else if (fetchbufC_v == `INV && fetchbufD_v == `INV) begin fetchCD(); if (do_pcinc) pc[31:0] <= pc[31:0] + fnInsnLength(insn) + fnInsnLength1(insn); $display("2pc <= %h", pc[31:0] + fnInsnLength(insn) + fnInsnLength1(insn)); end end if (ihit) begin $display("%h %h hit0=%b hit1=%b#", spc, pc, hit0, hit1); $display("insn=%h", insn); $display("%c insn0=%h insn1=%h", nmi_edge ? "*" : " ",insn0, insn1); $display("takb=%d br_pc=%h #", take_branch, branch_pc); $display("%c%c A: %d %h %h # %d", 45, fetchbuf?45:62, fetchbufA_v, fetchbufA_instr, fetchbufA_pc, fnInsnLength(fetchbufA_instr)); $display("%c%c B: %d %h %h # %d", 45, fetchbuf?45:62, fetchbufB_v, fetchbufB_instr, fetchbufB_pc, fnInsnLength(fetchbufB_instr)); $display("%c%c C: %d %h %h # %d", 45, fetchbuf?62:45, fetchbufC_v, fetchbufC_instr, fetchbufC_pc, fnInsnLength(fetchbufC_instr)); $display("%c%c D: %d %h %h # %d", 45, fetchbuf?62:45, fetchbufD_v, fetchbufD_instr, fetchbufD_pc, fnInsnLength(fetchbufD_instr)); $display("fetchbuf=%d",fetchbuf); end // if (ihit) begin for (i=0; i<QENTRIES; i=i+1) $display("%c%c %d: %c%c%c%c%c%c%c%c %d %c %c%h %d%s %h %h %h %c %o %h %c %o %h %c %o %h %c %o %h #", (i[2:0]==head0)?72:46, (i[2:0]==tail0)?84:46, i, iqentry_v[i]?"v":"-", iqentry_done[i]?"d":"-", iqentry_cmt[i]?"c":"-", iqentry_out[i]?"o":"-", iqentry_bt[i]?"b":"-", iqentry_memissue[i]?"m":"-", iqentry_agen[i]?"a":"-", iqentry_issue[i]?"i":"-", iqentry_islot[i], // ((i==0) ? iqentry_0_islot : (i==1) ? iqentry_1_islot : (i==2) ? iqentry_2_islot : (i==3) ? iqentry_3_islot : // (i==4) ? iqentry_4_islot : (i==5) ? iqentry_5_islot : (i==6) ? iqentry_6_islot : iqentry_7_islot), iqentry_stomp[i] ? "s" : "-", (fnIsFlowCtrl(iqentry_op[i]) ? 98 : fnIsMem(iqentry_op[i]) ? 109 : 97), iqentry_op[i], fnRegstr(iqentry_tgt[i]),fnRegstrGrp(iqentry_tgt[i]), iqentry_res[i], iqentry_a0[i], iqentry_a1[i], iqentry_a1_v[i]?"v":"-", iqentry_a1_s[i], iqentry_a2[i], iqentry_a2_v[i]?"v":"-", iqentry_a2_s[i], iqentry_a3[i], iqentry_a3_v[i]?"v":"-", iqentry_a3_s[i], iqentry_pred[i], iqentry_p_v[i]?"v":"-", iqentry_p_s[i], iqentry_pc[i]); $display("com0:%c%c %d r%d %h", commit0_v?"v":"-", iqentry_cmt[head0]?"c":"-", commit0_id, commit0_tgt, commit0_bus); $display("com1:%c%c %d r%d %h", commit1_v?"v":"-", iqentry_cmt[head1]?"c":"-", commit1_id, commit1_tgt, commit1_bus); // end //`include "Thor_dataincoming.v" // DATAINCOMING // // wait for operand/s to appear on alu busses and puts them into // the iqentry_a1 and iqentry_a2 slots (if appropriate) // as well as the appropriate iqentry_res slots (and setting valid bits) // // if (dram_v && iqentry_v[ dram_id[2:0] ] && iqentry_mem[ dram_id[2:0] ] ) begin // if data for stomped instruction, ignore $display("dram results to iq[%d]=%h", dram_id[2:0],dram_bus); if (!iqentry_jmpi[dram_id[2:0]]) iqentry_res [ dram_id[2:0] ] <= dram_bus; // If an exception occurred, stuff an interrupt instruction into the queue // slot. The instruction will re-issue as an ALU operation. We can change // the queued instruction because it isn't finished yet. if (|dram_exc) begin set_exception(dram_id, dram_exc==`EXC_DBE ? 8'hFB : dram_exc==`EXC_DBG ? 8'd243 : dram_exc==`EXC_SEGV ? 8'd244 : 8'hF8); // F8 = TLBMiss exception 243 = debug $stop; end else begin // Note that the predicate was already evaluated to TRUE before the // dram operation started. iqentry_cmt[dram_id[2:0]] <= `TRUE; iqentry_done[ dram_id[2:0] ] <= `TRUE; if ((iqentry_op[dram_id[2:0]]==`STS || iqentry_op[dram_id[2:0]]==`STCMP || iqentry_op[dram_id[2:0]]==`STMV || iqentry_op[dram_id[2:0]]==`STFND ) && lc==64'd0) begin string_pc <= 64'd0; end end end // What if there's a databus error during the store ? // set the IQ entry == DONE as soon as the SW is let loose to the memory system // if (dram0 == 2'd2 && fnIsStore(dram0_op) && dram0_op != `STS && dram0_op != `STMV && dram0_op != `SWCR) begin if ((alu0_v && dram0_id[2:0] == alu0_id[2:0]) || (alu1_v && dram0_id[2:0] == alu1_id[2:0])) panic <= `PANIC_MEMORYRACE; iqentry_done[ dram0_id[2:0] ] <= `TRUE; iqentry_cmt [ dram0_id[2:0]] <= `TRUE; iqentry_out[ dram0_id[2:0] ] <= `FALSE; end if (dram1 == 2'd2 && fnIsStore(dram1_op) && dram1_op != `STS && dram1_op != `STMV && dram1_op != `SWCR) begin if ((alu0_v && dram1_id[2:0] == alu0_id[2:0]) || (alu1_v && dram1_id[2:0] == alu1_id[2:0])) panic <= `PANIC_MEMORYRACE; iqentry_done[ dram1_id[2:0] ] <= `TRUE; iqentry_cmt [ dram1_id[2:0]] <= `TRUE; iqentry_out[ dram1_id[2:0] ] <= `FALSE; end if (dram2 == 2'd2 && fnIsStore(dram2_op) && dram2_op != `STS && dram2_op != `STMV && dram2_op != `SWCR) begin if ((alu0_v && dram2_id[2:0] == alu0_id[2:0]) || (alu1_v && dram2_id[2:0] == alu1_id[2:0])) panic <= `PANIC_MEMORYRACE; iqentry_done[ dram2_id[2:0] ] <= `TRUE; iqentry_cmt [ dram2_id[2:0]] <= `TRUE; iqentry_out[ dram2_id[2:0] ] <= `FALSE; end // // see if anybody else wants the results ... look at lots of buses: // - alu0_bus // - alu1_bus // - fp0_bus // - mem_bus // - commit0_bus // - commit1_bus // for (n = 0; n < QENTRIES; n = n + 1) begin if (iqentry_p_v[n] == `INV && iqentry_p_s[n]==alu0_id && iqentry_v[n] == `VAL && alu0_v == `VAL) begin iqentry_pred[n] <= alu0nyb[iqentry_preg[n]]; iqentry_p_v[n] <= `VAL; end if (iqentry_a1_v[n] == `INV && iqentry_a1_s[n] == alu0_id && iqentry_v[n] == `VAL && alu0_v == `VAL) begin iqentry_a1[n] <= alu0_bus; iqentry_a1_v[n] <= `VAL; end if (iqentry_a2_v[n] == `INV && iqentry_a2_s[n] == alu0_id && iqentry_v[n] == `VAL && alu0_v == `VAL) begin iqentry_a2[n] <= alu0_bus; iqentry_a2_v[n] <= `VAL; end if (iqentry_a3_v[n] == `INV && iqentry_a3_s[n] == alu0_id && iqentry_v[n] == `VAL && alu0_v == `VAL) begin iqentry_a3[n] <= alu0_bus; iqentry_a3_v[n] <= `VAL; end if (iqentry_T_v[n] == `INV && iqentry_T_s[n] == alu0_id && iqentry_v[n] == `VAL && alu0_v == `VAL) begin iqentry_T[n] <= alu0_bus; iqentry_T_v[n] <= `VAL; end if (iqentry_p_v[n] == `INV && iqentry_p_s[n] == alu1_id && iqentry_v[n] == `VAL && alu1_v == `VAL) begin iqentry_pred[n] <= alu1nyb[iqentry_preg[n]]; iqentry_p_v[n] <= `VAL; end if (iqentry_a1_v[n] == `INV && iqentry_a1_s[n] == alu1_id && iqentry_v[n] == `VAL && alu1_v == `VAL) begin iqentry_a1[n] <= alu1_bus; iqentry_a1_v[n] <= `VAL; end if (iqentry_a2_v[n] == `INV && iqentry_a2_s[n] == alu1_id && iqentry_v[n] == `VAL && alu1_v == `VAL) begin iqentry_a2[n] <= alu1_bus; iqentry_a2_v[n] <= `VAL; end if (iqentry_a3_v[n] == `INV && iqentry_a3_s[n] == alu1_id && iqentry_v[n] == `VAL && alu1_v == `VAL) begin iqentry_a3[n] <= alu1_bus; iqentry_a3_v[n] <= `VAL; end if (iqentry_T_v[n] == `INV && iqentry_T_s[n] == alu1_id && iqentry_v[n] == `VAL && alu1_v == `VAL) begin iqentry_T[n] <= alu1_bus; iqentry_T_v[n] <= `VAL; end `ifdef FLOATING_POINT /* if (iqentry_p_v[n] == `INV && iqentry_p_s[n] == fp0_id && iqentry_v[n] == `VAL && fp0_v == `VAL) begin iqentry_pred[n] <= fp0_bus[3:0]; iqentry_p_v[n] <= `VAL; end */ if (iqentry_a1_v[n] == `INV && iqentry_a1_s[n] == fp0_id && iqentry_v[n] == `VAL && fp0_v == `VAL) begin iqentry_a1[n] <= fp0_bus; iqentry_a1_v[n] <= `VAL; end if (iqentry_a2_v[n] == `INV && iqentry_a2_s[n] == fp0_id && iqentry_v[n] == `VAL && fp0_v == `VAL) begin iqentry_a2[n] <= fp0_bus; iqentry_a2_v[n] <= `VAL; end if (iqentry_a3_v[n] == `INV && iqentry_a3_s[n] == fp0_id && iqentry_v[n] == `VAL && fp0_v == `VAL) begin iqentry_a3[n] <= fp0_bus; iqentry_a3_v[n] <= `VAL; end if (iqentry_T_v[n] == `INV && iqentry_T_s[n] == fp0_id && iqentry_v[n] == `VAL && fp0_v == `VAL) begin iqentry_T[n] <= fp0_bus; iqentry_T_v[n] <= `VAL; end `endif // For SWCR if (iqentry_p_v[n] == `INV && iqentry_p_s[n]==dram_id && iqentry_v[n] == `VAL && dram_v == `VAL) begin iqentry_pred[n] <= dram_bus[3:0]; iqentry_p_v[n] <= `VAL; end if (iqentry_a1_v[n] == `INV && iqentry_a1_s[n] == dram_id && iqentry_v[n] == `VAL && dram_v == `VAL) begin iqentry_a1[n] <= dram_bus; iqentry_a1_v[n] <= `VAL; end if (iqentry_a2_v[n] == `INV && iqentry_a2_s[n] == dram_id && iqentry_v[n] == `VAL && dram_v == `VAL) begin iqentry_a2[n] <= dram_bus; iqentry_a2_v[n] <= `VAL; end if (iqentry_a3_v[n] == `INV && iqentry_a3_s[n] == dram_id && iqentry_v[n] == `VAL && dram_v == `VAL) begin iqentry_a3[n] <= dram_bus; iqentry_a3_v[n] <= `VAL; end if (iqentry_T_v[n] == `INV && iqentry_T_s[n] == dram_id && iqentry_v[n] == `VAL && dram_v == `VAL) begin iqentry_T[n] <= dram_bus; iqentry_T_v[n] <= `VAL; end if (iqentry_p_v[n] == `INV && iqentry_p_s[n]==commit0_id && iqentry_v[n] == `VAL && commit0_v == `VAL) begin iqentry_pred[n] <= cmt0nyb[iqentry_preg[n]]; iqentry_p_v[n] <= `VAL; end if (iqentry_a1_v[n] == `INV && iqentry_a1_s[n] == commit0_id && iqentry_v[n] == `VAL && commit0_v == `VAL) begin iqentry_a1[n] <= commit0_bus; iqentry_a1_v[n] <= `VAL; end if (iqentry_a2_v[n] == `INV && iqentry_a2_s[n] == commit0_id && iqentry_v[n] == `VAL && commit0_v == `VAL) begin iqentry_a2[n] <= commit0_bus; iqentry_a2_v[n] <= `VAL; end if (iqentry_a3_v[n] == `INV && iqentry_a3_s[n] == commit0_id && iqentry_v[n] == `VAL && commit0_v == `VAL) begin iqentry_a3[n] <= commit0_bus; iqentry_a3_v[n] <= `VAL; end if (iqentry_T_v[n] == `INV && iqentry_T_s[n] == commit0_id && iqentry_v[n] == `VAL && commit0_v == `VAL) begin iqentry_T[n] <= commit0_bus; iqentry_T_v[n] <= `VAL; end if (iqentry_p_v[n] == `INV && iqentry_p_s[n] == commit1_id && iqentry_v[n] == `VAL && commit1_v == `VAL) begin iqentry_pred[n] <= cmt1nyb[iqentry_preg[n]]; iqentry_p_v[n] <= `VAL; end if (iqentry_a1_v[n] == `INV && iqentry_a1_s[n] == commit1_id && iqentry_v[n] == `VAL && commit1_v == `VAL) begin iqentry_a1[n] <= commit1_bus; iqentry_a1_v[n] <= `VAL; end if (iqentry_a2_v[n] == `INV && iqentry_a2_s[n] == commit1_id && iqentry_v[n] == `VAL && commit1_v == `VAL) begin iqentry_a2[n] <= commit1_bus; iqentry_a2_v[n] <= `VAL; end if (iqentry_a3_v[n] == `INV && iqentry_a3_s[n] == commit1_id && iqentry_v[n] == `VAL && commit1_v == `VAL) begin iqentry_a3[n] <= commit1_bus; iqentry_a3_v[n] <= `VAL; end if (iqentry_T_v[n] == `INV && iqentry_T_s[n] == commit1_id && iqentry_v[n] == `VAL && commit1_v == `VAL) begin iqentry_T[n] <= commit1_bus; iqentry_T_v[n] <= `VAL; end end //`include "Thor_issue.v" // ISSUE // // determines what instructions are ready to go, then places them // in the various ALU queues. // also invalidates instructions following a branch-miss BEQ or any JALR (STOMP logic) // //alu0_dataready <= alu0_available && alu0_issue; /* && ((iqentry_issue[0] && iqentry_islot[0] == 4'd0 && !iqentry_stomp[0]) || (iqentry_issue[1] && iqentry_islot[1] == 4'd0 && !iqentry_stomp[1]) || (iqentry_issue[2] && iqentry_islot[2] == 4'd0 && !iqentry_stomp[2]) || (iqentry_issue[3] && iqentry_islot[3] == 4'd0 && !iqentry_stomp[3]) || (iqentry_issue[4] && iqentry_islot[4] == 4'd0 && !iqentry_stomp[4]) || (iqentry_issue[5] && iqentry_islot[5] == 4'd0 && !iqentry_stomp[5]) || (iqentry_issue[6] && iqentry_islot[6] == 4'd0 && !iqentry_stomp[6]) || (iqentry_issue[7] && iqentry_islot[7] == 4'd0 && !iqentry_stomp[7])); */ //alu1_dataready <= alu1_available && alu1_issue; /* && ((iqentry_issue[0] && iqentry_islot[0] == 4'd1 && !iqentry_stomp[0]) || (iqentry_issue[1] && iqentry_islot[1] == 4'd1 && !iqentry_stomp[1]) || (iqentry_issue[2] && iqentry_islot[2] == 4'd1 && !iqentry_stomp[2]) || (iqentry_issue[3] && iqentry_islot[3] == 4'd1 && !iqentry_stomp[3]) || (iqentry_issue[4] && iqentry_islot[4] == 4'd1 && !iqentry_stomp[4]) || (iqentry_issue[5] && iqentry_islot[5] == 4'd1 && !iqentry_stomp[5]) || (iqentry_issue[6] && iqentry_islot[6] == 4'd1 && !iqentry_stomp[6]) || (iqentry_issue[7] && iqentry_islot[7] == 4'd1 && !iqentry_stomp[7])); */ `ifdef FLOATING_POINT fp0_dataready <= 1'b1 && ((iqentry_fpissue[0] && iqentry_islot[0] == 4'd0 && !iqentry_stomp[0]) || (iqentry_fpissue[1] && iqentry_islot[1] == 4'd0 && !iqentry_stomp[1]) || (iqentry_fpissue[2] && iqentry_islot[2] == 4'd0 && !iqentry_stomp[2]) || (iqentry_fpissue[3] && iqentry_islot[3] == 4'd0 && !iqentry_stomp[3]) || (iqentry_fpissue[4] && iqentry_islot[4] == 4'd0 && !iqentry_stomp[4]) || (iqentry_fpissue[5] && iqentry_islot[5] == 4'd0 && !iqentry_stomp[5]) || (iqentry_fpissue[6] && iqentry_islot[6] == 4'd0 && !iqentry_stomp[6]) || (iqentry_fpissue[7] && iqentry_islot[7] == 4'd0 && !iqentry_stomp[7])); `endif for (n = 0; n < QENTRIES; n = n + 1) begin if (iqentry_v[n] && iqentry_stomp[n]) begin iqentry_v[n] <= `INV; if (dram0_id[2:0] == n[2:0]) dram0 <= `DRAMSLOT_AVAIL; if (dram1_id[2:0] == n[2:0]) dram1 <= `DRAMSLOT_AVAIL; if (dram2_id[2:0] == n[2:0]) dram2 <= `DRAMSLOT_AVAIL; end else if (iqentry_issue[n]) begin case (iqentry_islot[n]) 2'd0: if (alu0_available) begin alu0_ld <= 1'b1; alu0_sourceid <= n[3:0]; alu0_insnsz <= iqentry_insnsz[n]; alu0_op <= iqentry_op[n]; alu0_fn <= iqentry_fn[n]; alu0_cond <= iqentry_cond[n]; alu0_bt <= iqentry_bt[n]; alu0_pc <= iqentry_pc[n]; alu0_pred <= iqentry_p_v[n] ? iqentry_pred[n] : (iqentry_p_s[n] == alu0_id) ? alu0nyb[iqentry_preg[n]] : (iqentry_p_s[n] == alu1_id) ? alu1nyb[iqentry_preg[n]] : 4'h0; alu0_argA <= iqentry_a1_v[n] ? iqentry_a1[n] : (iqentry_a1_s[n] == alu0_id) ? alu0_bus : (iqentry_a1_s[n] == alu1_id) ? alu1_bus : 64'hDEADDEADDEADDEAD; alu0_argB <= iqentry_a2_v[n] ? iqentry_a2[n] : (iqentry_a2_s[n] == alu0_id) ? alu0_bus : (iqentry_a2_s[n] == alu1_id) ? alu1_bus : 64'hDEADDEADDEADDEAD; alu0_argC <= `ifdef SEGMENTATION ((iqentry_mem[n] && !iqentry_cmpmv[n]) || iqentry_lla[n]) ? {sregs[iqentry_fn[n][5:3]],12'h000} : `endif iqentry_a3_v[n] ? iqentry_a3[n] : (iqentry_a3_s[n] == alu0_id) ? alu0_bus : (iqentry_a3_s[n] == alu1_id) ? alu1_bus : 64'hDEADDEADDEADDEAD; alu0_argT <= iqentry_T_v[n] ? iqentry_T[n] : (iqentry_T_s[n] == alu0_id) ? alu0_bus : (iqentry_T_s[n] == alu1_id) ? alu1_bus : 64'hDEADDEADDEADDEAD; alu0_argI <= iqentry_a0[n]; alu0_dataready <= fnAluValid(iqentry_op[n],iqentry_fn[n]); iqentry_out[n] <= `TRUE; end 2'd1: if (alu1_available) begin alu1_ld <= 1'b1; alu1_sourceid <= n[3:0]; alu1_insnsz <= iqentry_insnsz[n]; alu1_op <= iqentry_op[n]; alu1_fn <= iqentry_fn[n]; alu1_cond <= iqentry_cond[n]; alu1_bt <= iqentry_bt[n]; alu1_pc <= iqentry_pc[n]; alu1_pred <= iqentry_p_v[n] ? iqentry_pred[n] : (iqentry_p_s[n] == alu0_id) ? alu0nyb[iqentry_preg[n]] : (iqentry_p_s[n] == alu1_id) ? alu1nyb[iqentry_preg[n]] : 4'h0; alu1_argA <= iqentry_a1_v[n] ? iqentry_a1[n] : (iqentry_a1_s[n] == alu0_id) ? alu0_bus : (iqentry_a1_s[n] == alu1_id) ? alu1_bus : 64'hDEADDEADDEADDEAD; alu1_argB <= iqentry_a2_v[n] ? iqentry_a2[n] : (iqentry_a2_s[n] == alu0_id) ? alu0_bus : (iqentry_a2_s[n] == alu1_id) ? alu1_bus : 64'hDEADDEADDEADDEAD; alu1_argC <= `ifdef SEGMENTATION ((iqentry_mem[n] && !iqentry_cmpmv[n]) || iqentry_lla[n]) ? {sregs[iqentry_fn[n][5:3]],12'h000} : `endif iqentry_a3_v[n] ? iqentry_a3[n] : (iqentry_a3_s[n] == alu0_id) ? alu0_bus : (iqentry_a3_s[n] == alu1_id) ? alu1_bus : 64'hDEADDEADDEADDEAD; alu1_argT <= iqentry_T_v[n] ? iqentry_T[n] : (iqentry_T_s[n] == alu0_id) ? alu0_bus : (iqentry_T_s[n] == alu1_id) ? alu1_bus : 64'hDEADDEADDEADDEAD; alu1_argI <= iqentry_a0[n]; alu1_dataready <= fnAluValid(iqentry_op[n],iqentry_fn[n]); iqentry_out[n] <= `TRUE; end default: panic <= `PANIC_INVALIDISLOT; endcase // iqentry_out[n] <= `TRUE; // if it is a memory operation, this is the address-generation step ... collect result into arg1 if (iqentry_mem[n] && !iqentry_tlb[n]) begin iqentry_a1_v[n] <= `INV; iqentry_a1_s[n] <= n[3:0]; end end end `ifdef FLOATING_POINT for (n = 0; n < QENTRIES; n = n + 1) begin if (iqentry_v[n] && iqentry_stomp[n]) ; else if (iqentry_fpissue[n]) begin case (iqentry_fpislot[n]) 2'd0: if (1'b1) begin fp0_ld <= 1'b1; fp0_sourceid <= n[3:0]; fp0_op <= iqentry_op[n]; fp0_fn <= iqentry_fn[n]; fp0_cond <= iqentry_cond[n]; fp0_pred <= iqentry_p_v[n] ? iqentry_pred[n] : (iqentry_p_s[n] == alu0_id) ? alu0nyb[iqentry_preg[n]] : (iqentry_p_s[n] == alu1_id) ? alu1nyb[iqentry_preg[n]] : 4'h0; fp0_argA <= iqentry_a1_v[n] ? iqentry_a1[n] : (iqentry_a1_s[n] == alu0_id) ? alu0_bus : (iqentry_a1_s[n] == alu1_id) ? alu1_bus : 64'hDEADDEADDEADDEAD; fp0_argB <= iqentry_a2_v[n] ? iqentry_a2[n] : (iqentry_a2_s[n] == alu0_id) ? alu0_bus : (iqentry_a2_s[n] == alu1_id) ? alu1_bus : 64'hDEADDEADDEADDEAD; fp0_argC <= iqentry_a3_v[n] ? iqentry_a3[n] : (iqentry_a3_s[n] == alu0_id) ? alu0_bus : (iqentry_a3_s[n] == alu1_id) ? alu1_bus : 64'hDEADDEADDEADDEAD; fp0_argT <= iqentry_T_v[n] ? iqentry_T[n] : (iqentry_T_s[n] == alu0_id) ? alu0_bus : (iqentry_T_s[n] == alu1_id) ? alu1_bus : 64'hDEADDEADDEADDEAD; fp0_argI <= iqentry_a0[n]; end default: panic <= `PANIC_INVALIDISLOT; endcase iqentry_out[n] <= `TRUE; end end `endif // MEMORY // // update the memory queues and put data out on bus if appropriate // Always puts data on the bus even for stores. In the case of // stores, the data is ignored. // // // dram0, dram1, dram2 are the "state machines" that keep track // of three pipelined DRAM requests. if any has the value "00", // then it can accept a request (which bumps it up to the value "01" // at the end of the cycle). once it hits the value "10" the request // and the bus is acknowledged the dram request // is finished and the dram_bus takes the value. if it is a store, the // dram_bus value is not used, but the dram_v value along with the // dram_id value signals the waiting memq entry that the store is // completed and the instruction can commit. // if (tlb_state != 3'd0 && tlb_state < 3'd3) tlb_state <= tlb_state + 3'd1; if (tlb_state==3'd3) begin dram_v <= `TRUE; dram_id <= tlb_id; dram_tgt <= tlb_tgt; dram_exc <= `EXC_NONE; dram_bus <= tlb_dato; tlb_op <= 4'h0; tlb_state <= 3'd0; end case(dram0) // The first state is to translate the virtual to physical address. // Also a good spot to check for debug match and segment limit violation. 3'd1: begin $display("0MEM %c:%h %h cycle started",fnIsStore(dram0_op)?"S" : "L", dram0_addr, dram0_data); if (dbg_lmatch|dbg_smatch) begin dram_v <= `TRUE; dram_id <= dram0_id; dram_tgt <= dram0_tgt; dram_exc <= `EXC_DBG; dram_bus <= 64'h0; dram0 <= 3'd0; end `ifdef SEGMENTATION `ifdef SEGLIMITS else if (dram0_addr[ABW-1:12] >= dram0_lmt) begin dram_v <= `TRUE; // we are finished the memory cycle dram_id <= dram0_id; dram_tgt <= dram0_tgt; dram_exc <= `EXC_SEGV; //dram0_exc; dram_bus <= 64'h0; dram0 <= 3'd0; end `endif `endif else if (!cyc_o) dram0 <= dram0 + 3'd1; end // State 2: // Check for a TLB miss on the translated address, and // Initiate a bus transfer 3'd2: if (DTLBMiss) begin dram_v <= `TRUE; // we are finished the memory cycle dram_id <= dram0_id; dram_tgt <= dram0_tgt; dram_exc <= `EXC_TLBMISS; //dram0_exc; dram_bus <= 64'h0; dram0 <= 3'd0; end else if (dram0_exc!=`EXC_NONE) begin dram_v <= `TRUE; // we are finished the memory cycle dram_id <= dram0_id; dram_tgt <= dram0_tgt; dram_exc <= dram0_exc; dram_bus <= 64'h0; dram0 <= 3'd0; end else begin if (dram0_op==`LCL) begin if (dram0_tgt==7'd0) begin ic_invalidate_line <= `TRUE; ic_lineno <= dram0_addr; end dram0 <= 3'd6; end else if (uncached || fnIsStore(dram0_op) || fnIsLoadV(dram0_op) || dram0_op==`CAS || ((dram0_op==`STMV || dram0_op==`INC) && stmv_flag)) begin if (cstate==IDLE) begin // make sure an instruction load isn't taking place dram0_owns_bus <= `TRUE; resv_o <= dram0_op==`LVWAR; cres_o <= dram0_op==`SWCR; lock_o <= dram0_op==`CAS; cyc_o <= 1'b1; stb_o <= 1'b1; we_o <= fnIsStore(dram0_op) || ((dram0_op==`STMV || dram0_op==`INC) && stmv_flag); sel_o <= fnSelect(dram0_op,dram0_fn,pea); rsel <= fnSelect(dram0_op,dram0_fn,pea); adr_o <= pea; if (dram0_op==`INC) dat_o <= fnDatao(dram0_op,dram0_fn,dram0_data) + index; else dat_o <= fnDatao(dram0_op,dram0_fn,dram0_data); dram0 <= dram0 + 3'd1; end end else begin // cached read dram0 <= 3'd6; rsel <= fnSelect(dram0_op,dram0_fn,pea); end end // State 3: // Wait for a memory ack 3'd3: if (ack_i|err_i) begin $display("MEM ack"); dram_v <= dram0_op != `CAS && dram0_op != `INC && dram0_op != `STS && dram0_op != `STMV && dram0_op != `STCMP && dram0_op != `STFND; dram_id <= dram0_id; dram_tgt <= dram0_tgt; dram_exc <= (err_i & dram0_tgt!=7'd0) ? `EXC_DBE : `EXC_NONE;//dram0_exc; if (dram0_op==`SWCR) dram_bus <= {63'd0,resv_i}; else dram_bus <= fnDatai(dram0_op,dram0_fn,dat_i[DBW-1:0],rsel); dram0_owns_bus <= `FALSE; wb_nack(); dram0 <= 3'd7; case(dram0_op) `ifdef STRINGOPS `STS: if (lc != 0 && !int_pending) begin dram0_addr <= dram0_addr + fnIndexAmt(dram0_fn); lc <= lc - 64'd1; dram0 <= 3'd1; // dram_bus <= dram0_addr + fnIndexAmt(dram0_fn) - dram0_seg; end else begin dram_bus <= dram0_addr + fnIndexAmt(dram0_fn) - dram0_seg; dram_v <= `VAL; dram0_op <= `NOP; end `STMV,`STCMP: begin dram_bus <= index; if (lc != 0 && !(int_pending && stmv_flag)) begin dram0 <= 3'd1; dram0_owns_bus <= `TRUE; if (stmv_flag) begin dram0_addr <= src_addr + index; if (dram0_op==`STCMP) begin if (dram0_data != fnDatai(dram0_op,dram0_fn,dat_i[DBW-1:0],rsel)) begin lc <= 64'd0; dram0 <= 3'd7; dram_v <= `VAL; end end end else begin dram0_addr <= dst_addr + index; dram0_data <= fnDatai(dram0_op,dram0_fn,dat_i[DBW-1:0],rsel); end if (!stmv_flag) inc_index(dram0_fn); stmv_flag <= ~stmv_flag; end else begin dram_v <= `VAL; dram0_op <= `NOP; end end `STFND: if (lc != 0 && !int_pending) begin dram0_addr <= src_addr + index; inc_index(dram0_fn); if (dram0_data == fnDatai(dram0_op,dram0_fn,dat_i[DBW-1:0],rsel)) begin lc <= 64'd0; dram_v <= `VAL; dram_bus <= index; end else dram0 <= 3'd1; end else begin dram_bus <= index; dram_v <= `VAL; dram0_op <= `NOP; end `endif `CAS: if (dram0_datacmp == dat_i[DBW-1:0]) begin $display("CAS match"); dram0_owns_bus <= `TRUE; cyc_o <= 1'b1; // hold onto cyc_o dram0 <= dram0 + 3'd1; end else begin dram_v <= `VAL; dram0 <= 3'd0; end `INC: begin if (stmv_flag) begin dram_v <= `VAL; dram0 <= 3'd0; end else begin dram0_data <= fnDatai(dram0_op,dram0_fn,dat_i[DBW-1:0],rsel); stmv_flag <= ~stmv_flag; dram0 <= 3'd1; end end `NOP: begin dram_v <= `VAL; dram0 <= 3'd0; end default: ; endcase end // State 4: // Start a second bus transaction for the CAS instruction 3'd4: begin stb_o <= 1'b1; we_o <= 1'b1; sel_o <= fnSelect(dram0_op,dram0_fn,pea); adr_o <= pea; dat_o <= fnDatao(dram0_op,dram0_fn,dram0_data); dram0 <= dram0 + 3'd1; end // State 5: // Wait for a memory ack for the second bus transaction of a CAS // 3'd5: begin dram_id <= dram0_id; dram_tgt <= dram0_tgt; if (ack_i|err_i) begin $display("MEM ack2"); dram_v <= `VAL; dram_exc <= (err_i & dram0_tgt!=7'd0) ? `EXC_DBE : `EXC_NONE; dram0_owns_bus <= `FALSE; wb_nack(); lock_o <= 1'b0; dram0 <= 3'd7; end end // State 6: // Wait for a data cache read hit 3'd6: if (rhit && dram0_op!=`LCL) begin case(dram0_op) `ifdef STRINGOPS // The read portion of the STMV was just done, go back and do // the write portion. `STMV: begin stmv_flag <= `TRUE; dram0_addr <= dst_addr + index; dram0_data <= fnDatai(dram0_op,dram0_fn,cdat,rsel); dram0 <= 3'd1; end `STCMP: begin dram_bus <= index; dram_id <= dram0_id; dram_tgt <= dram0_tgt; if (lc != 0 && !int_pending && stmv_flag) begin dram0_addr <= src_addr + index; stmv_flag <= ~stmv_flag; $display("*****************************"); $display("STCMP READ2:%H",fnDatai(dram0_op,dram0_fn,cdat,rsel)); $display("*****************************"); if (dram0_data != fnDatai(dram0_op,dram0_fn,cdat,rsel)) begin lc <= 64'd0; dram0 <= 3'd7; dram_v <= `VAL; end end else if (!stmv_flag) begin stmv_flag <= ~stmv_flag; dram0_addr <= dst_addr + index; dram0_data <= fnDatai(dram0_op,dram0_fn,cdat,rsel); $display("*****************************"); $display("STCMP READ1:%H",fnDatai(dram0_op,dram0_fn,cdat,rsel)); $display("*****************************"); dram0 <= 3'd1; inc_index(dram0_fn); end else begin dram_v <= `VAL; dram0 <= 3'd7; dram0_op <= `NOP; end end `STFND: begin dram_id <= dram0_id; dram_tgt <= dram0_tgt; dram_bus <= index; if (lc != 0 && !int_pending) begin dram0 <= 3'd1; dram0_addr <= src_addr + index; inc_index(dram0_fn); if (dram0_data == fnDatai(dram0_op,dram0_fn,cdat,rsel)) begin lc <= 64'd0; dram0 <= 3'd7; dram_v <= `VAL; end end else begin dram_v <= `VAL; dram0 <= 3'd7; dram0_op <= `NOP; end end `endif `INC: begin dram0_data <= fnDatai(dram0_op,dram0_fn,cdat,rsel); stmv_flag <= `TRUE; dram0 <= 3'd1; end // Set to NOP on a string miss `NOP: begin dram_v <= `VAL; dram0 <= 3'd0; end default: begin $display("Read hit [%h]",dram0_addr); dram_v <= `TRUE; dram_id <= dram0_id; dram_tgt <= dram0_tgt; dram_exc <= `EXC_NONE; dram_bus <= fnDatai(dram0_op,dram0_fn,cdat,rsel); dram0 <= 3'd0; end endcase end 3'd7: begin dram0 <= 3'd0; end default: dram0 <= 3'd0; endcase // // determine if the instructions ready to issue can, in fact, issue. // "ready" means that the instruction has valid operands but has not gone yet // // Stores can only issue if there is no possibility of a change of program flow. // That means no flow control operations or instructions that can cause an // exception can be before the store. iqentry_memissue[ head0 ] <= iqentry_memissue_head0; iqentry_memissue[ head1 ] <= iqentry_memissue_head1; iqentry_memissue[ head2 ] <= iqentry_memissue_head2; iqentry_memissue[ head3 ] <= iqentry_memissue_head3; iqentry_memissue[ head4 ] <= iqentry_memissue_head4; iqentry_memissue[ head5 ] <= iqentry_memissue_head5; iqentry_memissue[ head6 ] <= iqentry_memissue_head6; iqentry_memissue[ head7 ] <= iqentry_memissue_head7; /* || ( !fnIsFlowCtrl(iqentry_op[head0]) && !fnIsFlowCtrl(iqentry_op[head1]) && !fnIsFlowCtrl(iqentry_op[head2]) && !fnIsFlowCtrl(iqentry_op[head3]) && !fnIsFlowCtrl(iqentry_op[head4]) && !fnIsFlowCtrl(iqentry_op[head5]) && !fnIsFlowCtrl(iqentry_op[head6]))); */ // // take requests that are ready and put them into DRAM slots if (dram0 == `DRAMSLOT_AVAIL) dram0_exc <= `EXC_NONE; // Memory should also wait until segment registers are valid. The segment // registers are essentially static registers while a program runs. They are // setup by only the operating system. The system software must ensure the // segment registers are stable before they get used. We don't bother checking // for rf_v[]. // for (n = 0; n < QENTRIES; n = n + 1) if (!iqentry_stomp[n] && iqentry_memissue[n] && iqentry_agen[n] && iqentry_tlb[n] && !iqentry_out[n]) begin $display("TLB issue"); if (!iqentry_cmt[n]) begin iqentry_done[n] <= `TRUE; iqentry_out[n] <= `FALSE; iqentry_agen[n] <= `FALSE; iqentry_res[n] <= iqentry_T_v[n] ? iqentry_T[n] : (iqentry_T_s[n] == alu0_id) ? alu0_bus : (iqentry_T_s[n] == alu1_id) ? alu1_bus : 64'hDEADDEADDEADDEAD; end else if (tlb_state==3'd0) begin tlb_state <= 3'd1; tlb_id <= {1'b1, n[2:0]}; tlb_op <= iqentry_a0[n][3:0]; tlb_regno <= iqentry_a0[n][7:4]; tlb_tgt <= iqentry_tgt[n]; tlb_data <= iqentry_a1[n]; iqentry_out[n] <= `TRUE; end end else if (!iqentry_stomp[n] && iqentry_memissue[n] && iqentry_agen[n] && !iqentry_out[n]) begin if (!iqentry_cmt[n]) begin iqentry_done[n] <= `TRUE; iqentry_out[n] <= `FALSE; iqentry_agen[n] <= `FALSE; iqentry_res[n] <= iqentry_T_v[n] ? iqentry_T[n] : (iqentry_T_s[n] == alu0_id) ? alu0_bus : (iqentry_T_s[n] == alu1_id) ? alu1_bus : 64'hDEADDEADDEADDEAD; end else begin if (fnIsStoreString(iqentry_op[n])) string_pc <= iqentry_pc[n]; $display("issued memory cycle"); if (dram0 == `DRAMSLOT_AVAIL) begin dram0 <= 3'd1; dram0_id <= { 1'b1, n[2:0] }; dram0_misspc <= iqentry_pc[n]; dram0_op <= iqentry_op[n]; dram0_fn <= iqentry_fn[n]; dram0_tgt <= iqentry_tgt[n]; dram0_data <= (iqentry_ndx[n] || iqentry_cas[n]) ? iqentry_a3[n] : `ifdef STACKOPS iqentry_pea[n] ? iqentry_a2[n] + iqentry_a0[n] : `endif iqentry_a2[n]; dram0_datacmp <= iqentry_a2[n]; `ifdef SEGMENTATION if (iqentry_cmpmv[n]) dram0_addr <= iqentry_a1[n] + {sregs[iqentry_fn[n][5:3]],12'h000}; else dram0_addr <= iqentry_a1[n]; dram0_seg <= {sregs[iqentry_fn[n][5:3]],12'h000}; dram0_lmt <= sregs[iqentry_fn[n][5:3]] + sregs_lmt[iqentry_fn[n][5:3]]; // dram0_exc <= (iqentry_a1[n][ABW-1:12] >= sregs_lmt[iqentry_fn[n][5:3]]) ? `EXC_SEGV : `EXC_NONE; `ifdef STRINGOPS src_addr <= iqentry_a1[n] + {sregs[iqentry_fn[n][5:3]],12'h000}; dst_addr <= iqentry_a2[n] + {sregs[iqentry_fn[n][5:3]],12'h000}; `endif `else dram0_addr <= iqentry_a1[n]; `ifdef STRINGOPS src_addr <= iqentry_a1[n]; dst_addr <= iqentry_a2[n]; `endif `endif stmv_flag <= `FALSE; index <= iqentry_op[n]==`STS ? fnIndexAmt(iqentry_fn[n]) : iqentry_op[n]==`INC ? iqentry_a2[n] : iqentry_a3[n]; iqentry_out[n] <= `TRUE; end end end for (n = 0; n < QENTRIES; n = n + 1) begin if (iqentry_op[n]==`IMM && iqentry_v[(n+1)&7] && ((iqentry_pc[(n+1)&7]==iqentry_pc[n]+iqentry_insnsz[n]) || (iqentry_pc[(n+1)&7]==iqentry_pc[n]))) // address inherited due to interrupt iqentry_done[n] <= `TRUE; if (!iqentry_v[n]) iqentry_done[n] <= `FALSE; end // $display("TLB: en=%b imatch=%b pgsz=%d pcs=%h phys=%h", utlb1.TLBenabled,utlb1.IMatch,utlb1.PageSize,utlb1.pcs,utlb1.IPFN); // for (i = 0; i < 64; i = i + 1) // $display("vp=%h G=%b",utlb1.TLBVirtPage[i],utlb1.TLBG[i]); //`include "Thor_commit.v" // It didn't work in simulation when the following was declared under an // independant always clk block // commit_spr(commit0_v,commit0_tgt,commit0_bus,0); commit_spr(commit1_v,commit1_tgt,commit1_bus,1); // When the INT instruction commits set the hardware interrupt status to disable further interrupts. if (int_commit) begin $display("*********************"); $display("*********************"); $display("Interrupt committing"); $display("*********************"); $display("*********************"); StatusHWI <= `TRUE; imb <= im; im <= 1'b0; // Reset the nmi edge sense circuit but only for an NMI if ((iqentry_a0[head0][7:0]==8'hFE && commit0_v && iqentry_op[head0]==`INT) || (iqentry_a0[head1][7:0]==8'hFE && commit1_v && iqentry_op[head1]==`INT)) nmi_edge <= 1'b0; string_pc <= 64'd0; `ifdef PCHIST pc_cap <= `FALSE; `endif end if (sys_commit) begin if (StatusEXL!=8'hFF) StatusEXL <= StatusEXL + 8'd1; end // On a debug commit set status StatusDBG to prevent further single stepping. `ifdef DEBUG_LOGIC if (dbg_commit) begin StatusDBG <= `TRUE; end `endif oddball_commit(commit0_v,head0); oddball_commit(commit1_v,head1); // // COMMIT PHASE (dequeue only ... not register-file update) // // If the third instruction is invalidated or if it doesn't update the register // file then it is allowed to commit too. // The head pointer might advance by three. // if (~|panic) casex ({ iqentry_v[head0], iqentry_done[head0], iqentry_v[head1], iqentry_done[head1], iqentry_v[head2], iqentry_done[head2]}) // retire 3 6'b0x_0x_0x: if (head0 != tail0 && head1 != tail0 && head2 != tail0) begin head_inc(3); end else if (head0 != tail0 && head1 != tail0) begin head_inc(2); end else if (head0 != tail0) begin head_inc(1); end // retire 2 (wait for regfile for head2) 6'b0x_0x_10: begin head_inc(2); end // retire 2 or 3 (wait for regfile for head2) 6'b0x_0x_11: begin if (iqentry_tgt[head2]==7'd0) begin iqentry_v[head2] <= `INV; head_inc(3); end else begin head_inc(2); end end // retire 3 6'b0x_11_0x: if (head1 != tail0 && head2 != tail0) begin iqentry_v[head1] <= `INV; head_inc(3); end else begin iqentry_v[head1] <= `INV; head_inc(2); end // retire 2 (wait on head2 or wait on register file for head2) 6'b0x_11_10: begin iqentry_v[head1] <= `INV; head_inc(2); end 6'b0x_11_11: begin if (iqentry_tgt[head2]==7'd0) begin iqentry_v[head1] <= `INV; iqentry_v[head2] <= `INV; head_inc(3); end else begin iqentry_v[head1] <= `INV; head_inc(2); end end // 4'b00_00 - neither valid; skip both // 4'b00_01 - neither valid; skip both // 4'b00_10 - skip head0, wait on head1 // 4'b00_11 - skip head0, commit head1 // 4'b01_00 - neither valid; skip both // 4'b01_01 - neither valid; skip both // 4'b01_10 - skip head0, wait on head1 // 4'b01_11 - skip head0, commit head1 // 4'b10_00 - wait on head0 // 4'b10_01 - wait on head0 // 4'b10_10 - wait on head0 // 4'b10_11 - wait on head0 // 4'b11_00 - commit head0, skip head1 // 4'b11_01 - commit head0, skip head1 // 4'b11_10 - commit head0, wait on head1 // 4'b11_11 - commit head0, commit head1 // // retire 0 (stuck on head0) 6'b10_xx_xx: ; // retire 3 6'b11_0x_0x: if (head1 != tail0 && head2 != tail0) begin iqentry_v[head0] <= `INV; head_inc(3); end else if (head1 != tail0) begin iqentry_v[head0] <= `INV; head_inc(2); end else begin iqentry_v[head0] <= `INV; head_inc(1); end // retire 2 (wait for regfile for head2) 6'b11_0x_10: begin iqentry_v[head0] <= `INV; head_inc(2); end // retire 2 or 3 (wait for regfile for head2) 6'b11_0x_11: if (iqentry_tgt[head2]==7'd0) begin iqentry_v[head0] <= `INV; iqentry_v[head2] <= `INV; head_inc(3); end else begin iqentry_v[head0] <= `INV; head_inc(2); end // // retire 1 (stuck on head1) 6'b00_10_xx, 6'b01_10_xx, 6'b11_10_xx: if (iqentry_v[head0] || head0 != tail0) begin iqentry_v[head0] <= `INV; head_inc(1); end // retire 2 or 3 6'b11_11_0x: if (head2 != tail0) begin iqentry_v[head0] <= `INV; // may conflict with STOMP, but since both are setting to 0, it is okay iqentry_v[head1] <= `INV; head_inc(3); end else begin iqentry_v[head0] <= `INV; iqentry_v[head1] <= `INV; head_inc(2); end // retire 2 (wait on regfile for head2) 6'b11_11_10: begin iqentry_v[head0] <= `INV; // may conflict with STOMP, but since both are setting to 0, it is okay iqentry_v[head1] <= `INV; // may conflict with STOMP, but since both are setting to 0, it is okay head_inc(2); end 6'b11_11_11: if (iqentry_tgt[head2]==7'd0) begin iqentry_v[head0] <= `INV; // may conflict with STOMP, but since both are setting to 0, it is okay iqentry_v[head1] <= `INV; // may conflict with STOMP, but since both are setting to 0, it is okay iqentry_v[head2] <= `INV; // may conflict with STOMP, but since both are setting to 0, it is okay head_inc(3); end else begin iqentry_v[head0] <= `INV; // may conflict with STOMP, but since both are setting to 0, it is okay iqentry_v[head1] <= `INV; // may conflict with STOMP, but since both are setting to 0, it is okay head_inc(2); end endcase if (branchmiss) rrmapno <= iqentry_renmapno[missid]; case(cstate) RESET1: begin ic_ld <= `TRUE; ic_ld_cntr <= 32'd0; cstate <= RESET2; end RESET2: begin ic_ld_cntr <= ic_ld_cntr + 32'd32; if (ic_ld_cntr >= 32'd32768) begin ic_ld <= `FALSE; ic_ld_cntr <= 32'd0; cstate <= IDLE; end; end IDLE: if (dcache_access_pending) begin $display("********************"); $display("DCache access to: %h",{pea[DBW-1:5],5'b00000}); $display("********************"); derr <= 1'b0; bte_o <= 2'b00; cti_o <= 3'b001; bl_o <= DBW==32 ? 5'd7 : 5'd3; cyc_o <= 1'b1; stb_o <= 1'b1; we_o <= 1'b0; sel_o <= {DBW/8{1'b1}}; adr_o <= {pea[DBW-1:5],5'b00000}; dat_o <= {DBW{1'b0}}; cstate <= DCACHE1; end else if ((!ihit && !mem_issue && dram0==3'd0)||(dram0==3'd6 && (dram0_op==`LCL && dram0_tgt==7'd0))) begin if ((dram0!=2'd0 || dram1!=2'd0 || dram2!=2'd0) && !(dram0==3'd6 && (dram0_op==`LCL && dram0_tgt==7'd0))) $display("drams non-zero"); else begin $display("********************"); $display("ICache access to: %h", (dram0==3'd6 && (dram0_op==`LCL && dram0_tgt==7'd0)) ? {dram0_addr[ABW-1:5],5'h00} : !hit0 ? {ppc[DBW-1:5],5'b00000} : {ppcp16[DBW-1:5],5'b00000}); $display("********************"); ierr <= 1'b0; bte_o <= 2'b00; cti_o <= 3'b001; bl_o <= DBW==32 ? 5'd7 : 5'd3; cyc_o <= 1'b1; stb_o <= 1'b1; we_o <= 1'b0; sel_o <= {DBW/8{1'b1}}; adr_o <= (dram0==3'd6 && (dram0_op==`LCL && dram0_tgt==7'd0)) ? {dram0_addr[ABW-1:5],5'h00} : !hit0 ? {ppc[DBW-1:5],5'b00000} : {ppcp16[DBW-1:5],5'b00000}; dat_o <= {DBW{1'b0}}; cstate <= ICACHE1; end end ICACHE1: begin if (ack_i|err_i) begin ierr <= ierr | err_i; // cumulate an error status if (DBW==32) begin adr_o[4:2] <= adr_o[4:2] + 3'd1; if (adr_o[4:2]==3'b110) cti_o <= 3'b111; if (adr_o[4:2]==3'b111) begin wb_nack(); cstate <= IDLE; if (dram0==3'd6 && dram0_op==`LCL) begin dram0_op<=`NOP; end end end else begin adr_o[4:3] <= adr_o[4:3] + 2'd1; if (adr_o[4:3]==2'b10) cti_o <= 3'b111; if (adr_o[4:3]==2'b11) begin wb_nack(); cstate <= IDLE; if (dram0==3'd6 && dram0_op==`LCL) begin dram0_op<=`NOP; end end end end end DCACHE1: begin if (ack_i|err_i) begin derr <= derr | err_i; // cumulate an error status if (DBW==32) begin adr_o[4:2] <= adr_o[4:2] + 3'd1; if (adr_o[4:2]==3'b110) cti_o <= 3'b111; if (adr_o[4:2]==3'b111) begin wb_nack(); cstate <= IDLE; if (dram0_op==`LCL) begin dram0_op <= `NOP; dram0_tgt <= 7'd0; end end end else begin adr_o[4:3] <= adr_o[4:3] + 2'd1; if (adr_o[4:3]==2'b10) cti_o <= 3'b111; if (adr_o[4:3]==2'b11) begin wb_nack(); cstate <= IDLE; if (dram0_op==`LCL) begin dram0_op <= `NOP; dram0_tgt <= 7'd0; end end end end end default: cstate <= IDLE; endcase // for (i=0; i<8; i=i+1) // $display("%d: %h %d %o #", i, urf1.regs0[i], rf_v[i], rf_source[i]); if (ihit) begin $display("dr=%d I=%h A=%h B=%h op=%c%d bt=%d src=%o pc=%h #", alu0_dataready, alu0_argI, alu0_argA, alu0_argB, (fnIsFlowCtrl(alu0_op) ? 98 : (fnIsMem(alu0_op)) ? 109 : 97), alu0_op, alu0_bt, alu0_sourceid, alu0_pc); $display("dr=%d I=%h A=%h B=%h op=%c%d bt=%d src=%o pc=%h #", alu1_dataready, alu1_argI, alu1_argA, alu1_argB, (fnIsFlowCtrl(alu1_op) ? 98 : (fnIsMem(alu1_op)) ? 109 : 97), alu1_op, alu1_bt, alu1_sourceid, alu1_pc); $display("v=%d bus=%h id=%o 0 #", alu0_v, alu0_bus, alu0_id); $display("bmiss0=%b src=%o mpc=%h #", alu0_branchmiss, alu0_sourceid, alu0_misspc); $display("cmt=%b cnd=%d prd=%d", alu0_cmt, alu0_cond, alu0_pred); $display("bmiss1=%b src=%o mpc=%h #", alu1_branchmiss, alu1_sourceid, alu1_misspc); $display("cmt=%b cnd=%d prd=%d", alu1_cmt, alu1_cond, alu1_pred); $display("bmiss=%b mpc=%h", branchmiss, misspc); $display("0: %d %h %o 0%d #", commit0_v, commit0_bus, commit0_id, commit0_tgt); $display("1: %d %h %o 0%d #", commit1_v, commit1_bus, commit1_id, commit1_tgt); end if (|panic) begin $display(""); $display("-----------------------------------------------------------------"); $display("-----------------------------------------------------------------"); $display("--------------- PANIC:%s -----------------", message[panic]); $display("-----------------------------------------------------------------"); $display("-----------------------------------------------------------------"); $display(""); $display("instructions committed: %d", I); $display("total execution cycles: %d", $time / 10); $display(""); end if (|panic && ~outstanding_stores) begin $finish; end end task wb_nack; begin resv_o <= 1'b0; cres_o <= 1'b0; bte_o <= 2'b00; cti_o <= 3'b000; bl_o <= 5'd0; cyc_o <= 1'b0; stb_o <= 1'b0; we_o <= 1'b0; sel_o <= 8'h00; adr_o <= {DBW{1'b0}}; dat_o <= {DBW{1'b0}}; end endtask task commit_spr; input commit_v; input [6:0] commit_tgt; input [DBW-1:0] commit_bus; input which; begin if (commit_v && commit_tgt[6]) begin casex(commit_tgt[5:0]) 6'b00xxxx: begin pregs[commit_tgt[3:0]] <= which ? cmt1nyb[commit_tgt[3:0]] : cmt0nyb[commit_tgt[3:0]];//commit_bus[3:0]; $display("pregs[%d]<=%h", commit_tgt[3:0], commit_bus[3:0]); // $stop; end 6'b01xxxx: begin cregs[commit_tgt[3:0]] <= commit_bus; $display("cregs[%d]<=%h", commit_tgt[3:0], commit_bus); end `ifdef SEGMENTATION 6'b100xxx: begin sregs[commit_tgt[2:0]] <= commit_bus[DBW-1:12]; $display("sregs[%d]<=%h", commit_tgt[2:0], commit_bus); end 6'b101xxx: sregs_lmt[commit_tgt[2:0]] <= commit_bus[DBW-1:12]; `endif 6'b110000: begin pregs[0] <= commit_bus[3:0]; pregs[1] <= commit_bus[7:4]; pregs[2] <= commit_bus[11:8]; pregs[3] <= commit_bus[15:12]; pregs[4] <= commit_bus[19:16]; pregs[5] <= commit_bus[23:20]; pregs[6] <= commit_bus[27:24]; pregs[7] <= commit_bus[31:28]; if (DBW==64) begin pregs[8] <= commit_bus[35:32]; pregs[9] <= commit_bus[39:36]; pregs[10] <= commit_bus[43:40]; pregs[11] <= commit_bus[47:44]; pregs[12] <= commit_bus[51:48]; pregs[13] <= commit_bus[55:52]; pregs[14] <= commit_bus[59:56]; pregs[15] <= commit_bus[63:60]; end end `LCTR: begin lc <= commit_bus; $display("LC <= %h", commit_bus); end `ASID: asid <= commit_bus; `SR: begin GM <= commit_bus[7:0]; GMB <= commit_bus[23:16]; imb <= commit_bus[31]; im <= commit_bus[15]; fxe <= commit_bus[12]; end 6'd60: spr_bir <= commit_bus[11:0]; 6'd61: case(spr_bir[5:0]) 6'd0: dbg_adr0 <= commit_bus; 6'd1: dbg_adr1 <= commit_bus; 6'd2: dbg_adr2 <= commit_bus; 6'd3: dbg_adr3 <= commit_bus; 6'd4: dbg_ctrl <= commit_bus; 6'd5: dbg_stat <= commit_bus; `ifdef PCHIST 6'd18: pc_ndx <= commit_bus[5:0]; `endif default: ; endcase 6'b111111: begin ld_clk_throttle <= `TRUE; clk_throttle_new <= commit_bus[15:0]; end default: ; endcase end end endtask // For string memory operations. // Indexing amount, should synth to a ROM. // function [63:0] fnIndexAmt; input [5:0] fn; begin case(fn[2:0]) 3'd0: fnIndexAmt = 64'd1; 3'd1: fnIndexAmt = 64'd2; 3'd2: fnIndexAmt = 64'd4; 3'd3: fnIndexAmt = 64'd8; 3'd4: fnIndexAmt = 64'd1; 3'd5: fnIndexAmt = 64'd2; 3'd6: fnIndexAmt = 64'd4; 3'd7: fnIndexAmt = 64'd8; endcase end endfunction // For string memory operations. // task inc_index; input [5:0] fn; begin index <= index + fnIndexAmt(fn); lc <= lc - 64'd1; end endtask function [DBW-1:0] fnSpr; input [5:0] regno; input [63:0] epc; begin // Read from the special registers unless overridden by the // value on the commit bus. casex(regno) 6'b00xxxx: fnSpr = {DBW/4{pregs[regno[3:0]]}}; 6'b01xxxx: fnSpr = cregs[regno[3:0]]; `ifdef SEGMENTATION 6'b100xxx: fnSpr = {sregs[regno[2:0]],12'h000}; 6'b101xxx: fnSpr = {sregs_lmt[regno[2:0]],12'h000}; `endif 6'b110000: if (DBW==64) fnSpr = {pregs[15],pregs[14],pregs[13],pregs[12], pregs[11],pregs[10],pregs[9],pregs[8], pregs[7],pregs[6],pregs[5],pregs[4], pregs[3],pregs[2],pregs[1],pregs[0]}; else fnSpr = {pregs[7],pregs[6],pregs[5],pregs[4], pregs[3],pregs[2],pregs[1],pregs[0]}; `TICK: fnSpr = tick; `LCTR: fnSpr = lc; `ASID: fnSpr = asid; `SR: begin fnSpr[7:0] = GM; fnSpr[23:16] = GMB; fnSpr[31] = imb; fnSpr[15] = im; fnSpr[12] = fxe; end 6'd60: fnSpr = spr_bir; 6'd61: casex(spr_bir[5:0]) 6'd0: fnSpr = dbg_adr0; 6'd1: fnSpr = dbg_adr1; 6'd2: fnSpr = dbg_adr2; 6'd3: fnSpr = dbg_adr3; 6'd4: fnSpr = dbg_ctrl; 6'd5: fnSpr = dbg_stat; `ifdef PCHIST 6'd16: fnSpr = pc_histo[31:0]; 6'd17: fnSpr = pc_histo[63:31]; `endif default: fnSpr = 64'd0; endcase default: fnSpr = 64'd0; endcase // Not sure why bother read the commit bus here ? Why not the alu bus as well ? // Need bypassing for write-through register file, reg read at same time as write // Shaves a clock cycle off register updates. rf_v is being set valid on the // clock cycle of the commit. // If an spr is committing... if (commit0_v && commit0_tgt=={1'b1,regno}) begin if (regno[5:4]==2'b00) begin if (DBW==32) fnSpr = {8{cmt0nyb[regno[2:0]]}}; else fnSpr = {16{cmt0nyb[regno[3:0]]}}; end else fnSpr = commit0_bus; end if (commit1_v && commit1_tgt=={1'b1,regno}) begin if (regno[5:4]==2'b00) begin if (DBW==32) fnSpr = {8{cmt1nyb[regno[2:0]]}}; else fnSpr = {16{cmt1nyb[regno[3:0]]}}; end else fnSpr = commit1_bus; end // Special cases where the register would not be read from the commit bus case(regno) `TICK: fnSpr = tick; 6'b010000: fnSpr = 64'd0; // code address zero 6'b011111: fnSpr = epc; // current program counter from fetchbufx_pc default: ; endcase end endfunction // "oddball" instruction commit cases. // task oddball_commit; input commit_v; input [2:0] head; begin if (commit_v) case(iqentry_op[head]) `CLI: begin imcd <= IMCD; imb <= 1'b0; end `SEI: begin im <= 1'b1; imb <= 1'b1; end // When the RTI instruction commits clear the hardware interrupt status to enable interrupts. `RTI: begin StatusHWI <= `FALSE; if (imb) im <= 1'b1; else imcd <= IMCD; end `RTD: begin StatusDBG <= `FALSE; if (StatusEXL!=8'h00) StatusEXL <= StatusEXL - 8'd1; end `RTE: begin if (StatusEXL!=8'h00) StatusEXL <= StatusEXL - 8'd1; end `CACHE: begin case(iqentry_fn[head]) 6'd0: ic_invalidate <= `TRUE; 6'd1: begin ic_invalidate_line <= `TRUE; ic_lineno <= iqentry_a1[head] + {sregs[3'd7],12'h000}; end 6'd32: dc_invalidate <= `TRUE; 6'd33: begin dc_invalidate_line <= `TRUE; dc_lineno <= iqentry_a1[head] + {sregs[iqentry_fn[head][5:3]],12'h000}; end default: ; // do nothing endcase end default: ; endcase end endtask // The exception_set var is used to reduce the number of logic levels. Rather // than having an if/elseif tree for all the exceptional conditions that are // trapped. The exception_set var tracks these excaptions and reduces the // tree to a single if. task enque0a; input [2:0] tail; input [2:0] inc; input unlink; begin if (fetchbuf0_pc==32'h0) $stop; if (fetchbuf0_pc==32'hF44) $stop; if (fetchbuf0_pc==32'hFFFC275A) $stop; `ifdef SEGMENTATION `ifdef SEGLIMITS // If segment limit exceeded and not in the non-segmented area. if (fetchbuf0_pc >= {sregs_lmt[3'd7],12'h000} && fetchbuf0_pc[ABW-1:ABW-4]!=4'hF) set_exception(tail,8'd244); `endif `endif // If targeting a kernel mode register and not in kernel mode. // But okay if it is an SYS or INT instruction. if (fnIsKMOnlyReg(Rt0) && !km && !(opcode0==`SYS || opcode0==`INT)) set_exception(tail,8'd245); // If attempting to use an undefined instruction `ifdef TRAP_ILLEGALOPS if (fnIsIllegal(opcode0,opcode0==`MLO ? rfoc0[5:0] : fnFunc(fetchbuf0_instr))) set_exception(tail,8'd250); `endif `ifdef DEBUG_LOGIC if (dbg_ctrl[0] && dbg_ctrl[17:16]==2'b00 && fetchbuf0_pc==dbg_adr0) dbg_imatchA0 = `TRUE; if (dbg_ctrl[1] && dbg_ctrl[21:20]==2'b00 && fetchbuf0_pc==dbg_adr1) dbg_imatchA1 = `TRUE; if (dbg_ctrl[2] && dbg_ctrl[25:24]==2'b00 && fetchbuf0_pc==dbg_adr2) dbg_imatchA2 = `TRUE; if (dbg_ctrl[3] && dbg_ctrl[29:28]==2'b00 && fetchbuf0_pc==dbg_adr3) dbg_imatchA3 = `TRUE; if (dbg_imatchA0|dbg_imatchA1|dbg_imatchA2|dbg_imatchA3) dbg_imatchA = `TRUE; if (dbg_imatchA) set_exception(tail,8'd243); // Debug exception `endif if (!exception_set) begin interrupt_pc = // If the previous instruction was an interrupt, then inherit the address (iqentry_op[(tail-3'd1)&7]==`INT && iqentry_v[(tail-3'd1)&7]==`VAL && iqentry_tgt[(tail-3'd1)&7][3:0]==4'hE) ? (string_pc != 0 ? string_pc : iqentry_pc[(tail-3'd1)&7]) : // Otherwise inherit the address of any preceding immediate prefix. (iqentry_op[(tail-3'd1)&7]==`IMM && iqentry_v[(tail-3'd1)&7]==`VAL) ? (string_pc != 0 ? string_pc : iqentry_pc[(tail-3'd1)&7]) : // Otherwise use the address of the interrupted instruction (string_pc != 0 ? string_pc : fetchbuf0_pc); iqentry_v [tail] <= `VAL; iqentry_done [tail] <= `INV; iqentry_cmt [tail] <= `TRUE; iqentry_out [tail] <= `INV; iqentry_res [tail] <= `ZERO; iqentry_insnsz[tail] <= fnInsnLength(fetchbuf0_instr); iqentry_op [tail] <= opcode0; iqentry_fn [tail] <= opcode0==`MLO ? rfoc0[5:0] : fnFunc(fetchbuf0_instr); iqentry_cond [tail] <= cond0; iqentry_bt [tail] <= fnIsFlowCtrl(opcode0) && predict_taken0; iqentry_br [tail] <= opcode0[7:4]==`BR; iqentry_agen [tail] <= `INV; iqentry_pc [tail] <= (opcode0==`INT && Rt0[3:0]==4'hE) ? interrupt_pc : fetchbuf0_pc; iqentry_mem [tail] <= fetchbuf0_mem; iqentry_ndx [tail] <= fnIsIndexed(opcode0); iqentry_cas [tail] <= opcode0==`CAS; iqentry_pushpop[tail] <= opcode0==`PUSH || opcode0==`POP; iqentry_pea [tail] <= opcode0==`PEA; iqentry_cmpmv[tail] <= opcode0==`STCMP || opcode0==`STMV; iqentry_lla [tail] <= opcode0==`LLA || opcode0==`LLAX; iqentry_tlb [tail] <= opcode0==`TLB; iqentry_jmp [tail] <= fetchbuf0_jmp; iqentry_jmpi [tail] <= opcode0==`JMPI || opcode0==`JMPIX; iqentry_sync [tail] <= opcode0==`SYNC; iqentry_memsb[tail] <= opcode0==`MEMSB; iqentry_memdb[tail] <= opcode0==`MEMDB; iqentry_fp [tail] <= fetchbuf0_fp; iqentry_rfw [tail] <= fetchbuf0_rfw; iqentry_tgt [tail] <= Rt0; iqentry_preg [tail] <= Pn0; // Need the bypassing on the preg file for write-through register effect. iqentry_pred [tail] <= fnSpr({2'h0,Pn0},fetchbuf0_pc);//pregs[Pn0]; // Look at the previous queue slot to see if an immediate prefix is enqueued iqentry_a0[tail] <= (opcode0==`INT || opcode0==`SYS) ? fnImm(fetchbuf0_instr) : fnIsBranch(opcode0) ? {{DBW-12{fetchbuf0_instr[11]}},fetchbuf0_instr[11:8],fetchbuf0_instr[23:16]} : (iqentry_op[(tail-3'd1)&7]==`IMM && iqentry_v[tail-3'd1]) ? {iqentry_a0[(tail-3'd1)&7][DBW-1:8],fnImm8(fetchbuf0_instr)}: opcode0==`IMM ? fnImmImm(fetchbuf0_instr) : fnImm(fetchbuf0_instr); // These register recordings for simulation debug. They should be stripped // out of synthesis because they don't drive any signals. `ifdef SIMULATION iqentry_r1 [tail] <= Ra0; iqentry_r2 [tail] <= Rb0; iqentry_r3 [tail] <= Rc0; iqentry_rt [tail] <= Rt0; `endif iqentry_a1 [tail] <= fnOpa(opcode0,Ra0,fetchbuf0_instr,rfoa0,fetchbuf0_pc); iqentry_a2 [tail] <= fnOpb(opcode0,Rb0,fetchbuf0_instr,rfob0,fetchbuf0_pc); iqentry_a3 [tail] <= rfoc0; iqentry_T [tail] <= fnOpt(Rt0,rfot0,fetchbuf0_pc); // The source is set even though the arg might be automatically valid (less logic). // This is harmless to do. Note there is no source for the 'I' argument. iqentry_p_s [tail] <= rf_source[{1'b1,2'h0,Pn0}]; iqentry_a1_s [tail] <= //unlink ? {1'b0, (tail-1)&7} : rf_source[Ra0]; iqentry_a2_s [tail] <= rf_source[Rb0]; iqentry_a3_s [tail] <= rf_source[Rc0]; iqentry_T_s [tail] <= rf_source[Rt0]; // Always do this because it's the first queue slot. validate_args10(tail); end tail0 <= tail0 + inc; tail1 <= tail1 + inc; tail2 <= tail2 + inc; queued1 = `TRUE; rrmapno <= rrmapno + 3'd1; end endtask task enquePushpopAdd; input [2:0] tail; input pushpop; input link; input unlink; input which; begin $display("Pushpop add"); iqentry_v [tail] <= `VAL; iqentry_done [tail] <= `INV; iqentry_cmt [tail] <= `TRUE; iqentry_out [tail] <= `INV; iqentry_res [tail] <= 64'd0; iqentry_insnsz[tail] <= 4'd0; iqentry_op [tail] <= `ADDUI; iqentry_fn [tail] <= 6'b0; iqentry_cond [tail] <= which ? cond1 :cond0; iqentry_bt [tail] <= 1'b0; iqentry_agen [tail] <= `INV; iqentry_pc [tail] <= which ? fetchbuf1_pc : fetchbuf0_pc; iqentry_mem [tail] <= 1'b0; iqentry_ndx [tail] <= 1'b0; iqentry_cas [tail] <= 1'b0; iqentry_pushpop[tail] <= 1'b0; iqentry_pea [tail] <= 1'b0; iqentry_cmpmv[tail] <= 1'b0; iqentry_lla [tail] <= 1'b0; iqentry_tlb [tail] <= 1'b0; iqentry_jmp [tail] <= 1'b0; iqentry_jmpi [tail] <= 1'b0; iqentry_sync [tail] <= 1'b0; iqentry_memsb[tail] <= 1'b0; iqentry_memdb[tail] <= 1'b0; iqentry_fp [tail] <= 1'b0; iqentry_rfw [tail] <= 1'b1; iqentry_tgt [tail] <= 7'd27; iqentry_pred [tail] <= pregs[which ? Pn1 : Pn0]; // Look at the previous queue slot to see if an immediate prefix is enqueued iqentry_a0 [tail] <= link ? (which ? {{46{fetchbuf1_instr[39]}},fetchbuf1_instr[21:16],fetchbuf1_instr[39:28],3'b000} : {{46{fetchbuf0_instr[39]}},fetchbuf0_instr[21:16],fetchbuf0_instr[39:28],3'b000}) : (pushpop|unlink) ? 64'd8 : -64'd8; iqentry_a1 [tail] <= which ? rfoa1 : rfoa0; iqentry_a2 [tail] <= 64'd0; iqentry_a3 [tail] <= 64'd0; iqentry_T [tail] <= //unlink ? (which ? rfot1 : rfot0) : (which ? rfoa1 : rfoa0); // The source is set even though the arg might be automatically valid (less logic). // This is harmless to do. Note there is no source for the 'I' argument. iqentry_p_s [tail] <= rf_source[{1'b1,2'h0,which ? Pn1 : Pn0}]; iqentry_a1_s [tail] <= rf_source[Ra0]; iqentry_a2_s [tail] <= rf_source[Rb0]; iqentry_a3_s [tail] <= rf_source[Rc0]; iqentry_T_s [tail] <= rf_source[Ra0]; // Always do this because it's the first queue slot. iqentry_p_v [tail] <= rf_v [{1'b1,2'h0,which ? Pn1:Pn0}] || ((which ? cond1 : cond0) < 4'h2); iqentry_a1_v [tail] <= rf_v[ which ? Ra1 : Ra0 ]; iqentry_a2_v [tail] <= 1'b1; iqentry_a3_v [tail] <= 1'b1; iqentry_T_v [tail] <= //unlink ? rf_v[which ? Rt1 : Rt0] : rf_v[ which ? Ra1 : Ra0 ]; rf_v[ 7'd27 ] = `INV; rf_source[ 7'd27 ] <= { 1'b0, tail }; // top bit indicates ALU/MEM bus end endtask // enque 0 on tail0 or tail1 task enque0; input [2:0] tail; input [2:0] inc; input test_stomp; input validate_args; begin if (opcode0==`NOP) queued1 = `TRUE; // to update fetch buffers `ifdef DEBUG_LOGIC else if (dbg_ctrl[7] && !StatusDBG) begin if (iqentry_v[tail]==`INV && iqentry_v[(tail+1)&7]==`INV) begin enque0a(tail,3'd2,1'b0); set_exception((tail+1)&7,8'd243); allowq = `FALSE; end end `endif `ifdef STACKOPS // A pop instruction takes 2 queue entries. else if (fnIsPop(fetchbuf0_instr)|fnIsPush(fetchbuf0_instr)|opcode0==`LINK) begin $display("0 found push/pop"); if (iqentry_v[tail]==`INV && iqentry_v[(tail+1)&7]==`INV) begin $display("enqueing2"); enque0a(tail,3'd2,1'b0); enquePushpopAdd((tail+1)&7,fnIsPop(fetchbuf0_instr),opcode0==`LINK,0,0); allowq = `FALSE; end end `ifdef UNLINKOP else if (opcode0==`UNLINK) begin if (iqentry_v[tail]==`INV && iqentry_v[(tail+1)&7]==`INV) begin enquePushpopAdd(tail,1'b0,1'b0,1'b1,0); enque0a((tail+1)&7,3'd2,1'b1); allowq = `FALSE; end end `endif `endif else if (iqentry_v[tail] == `INV) begin if ((({fnIsBranch(opcode0), predict_taken0} == {`TRUE, `TRUE})||(opcode0==`LOOP)) && test_stomp) qstomp = `TRUE; enque0a(tail,inc,0); end end endtask task enque1a; input [2:0] tail; input [2:0] inc; input validate_args; input unlink; begin if (fetchbuf1_pc==32'h0) $stop; if (fetchbuf1_pc==32'hF44) $stop; if (fetchbuf1_pc==32'hFFFC275A) $stop; `ifdef SEGMENTATION `ifdef SEGLIMITS if (fetchbuf1_pc >= {sregs_lmt[3'd7],12'h000} && fetchbuf1_pc[ABW-1:ABW-4]!=4'hF) set_exception(tail,8'd244); `endif `endif if (fnIsKMOnlyReg(Rt1) && !km && !(opcode1==`SYS || opcode1==`INT)) set_exception(tail,8'd245); `ifdef TRAP_ILLEGALOPS if (fnIsIllegal(opcode1,opcode1==`MLO ? rfoc1[5:0] : fnFunc(fetchbuf1_instr))) set_exception(tail,8'd250); `endif `ifdef DEBUG_LOGIC if (dbg_ctrl[0] && dbg_ctrl[17:16]==2'b00 && fetchbuf1_pc==dbg_adr0) dbg_imatchB0 = `TRUE; if (dbg_ctrl[1] && dbg_ctrl[21:20]==2'b00 && fetchbuf1_pc==dbg_adr1) dbg_imatchB1 = `TRUE; if (dbg_ctrl[2] && dbg_ctrl[25:24]==2'b00 && fetchbuf1_pc==dbg_adr2) dbg_imatchB2 = `TRUE; if (dbg_ctrl[3] && dbg_ctrl[29:28]==2'b00 && fetchbuf1_pc==dbg_adr3) dbg_imatchB3 = `TRUE; if (dbg_imatchB0|dbg_imatchB1|dbg_imatchB2|dbg_imatchB3) dbg_imatchB = `TRUE; if (dbg_imatchB) set_exception(tail,8'd243); // debug excpetion `endif if (!exception_set) begin // If an instruction wasn't enqueued or it wasn't an interrupt instruction then // the interrupt pc will need to be set. Othersise this enqueue will inherit // from the previous one. if (!queued1 || !(opcode0==`INT && Rt0[3:0]==4'hE)) interrupt_pc = (iqentry_op[(tail-3'd1)&7]==`INT && iqentry_v[(tail-3'd1)&7]==`VAL && iqentry_tgt[(tail-3'd1)&7][3:0]==4'hE) ? (string_pc != 0 ? string_pc : iqentry_pc[(tail-3'd1)&7]) : (iqentry_op[(tail-3'd1)&7]==`IMM && iqentry_v[(tail-3'd1)&7]==`VAL) ? (string_pc != 0 ? string_pc : iqentry_pc[(tail-3'd1)&7]) : (string_pc != 0 ? string_pc : fetchbuf1_pc); iqentry_v [tail] <= `VAL; iqentry_done [tail] <= `INV; iqentry_cmt [tail] <= `TRUE; iqentry_out [tail] <= `INV; iqentry_res [tail] <= `ZERO; iqentry_insnsz[tail] <= fnInsnLength(fetchbuf1_instr); iqentry_op [tail] <= opcode1; iqentry_fn [tail] <= opcode1==`MLO ? rfoc1[5:0] : fnFunc(fetchbuf1_instr); iqentry_cond [tail] <= cond1; iqentry_bt [tail] <= fnIsFlowCtrl(opcode1) && predict_taken1; iqentry_br [tail] <= opcode1[7:4]==`BR; iqentry_agen [tail] <= `INV; // If an interrupt is being enqueued and the previous instruction was an immediate prefix, then // inherit the address of the previous instruction, so that the prefix will be executed on return // from interrupt. // If a string operation was in progress then inherit the address of the string operation so that // it can be continued. iqentry_pc [tail] <= (opcode1==`INT && Rt1[3:0]==4'hE) ? interrupt_pc : fetchbuf1_pc; iqentry_mem [tail] <= fetchbuf1_mem; iqentry_ndx [tail] <= fnIsIndexed(opcode1); iqentry_cas [tail] <= opcode1==`CAS; iqentry_pushpop[tail] <= opcode1==`PUSH || opcode1==`POP; iqentry_pea [tail] <= opcode1==`PEA; iqentry_cmpmv[tail] <= opcode1==`STCMP || opcode1==`STMV; iqentry_lla [tail] <= opcode1==`LLA || opcode1==`LLAX; iqentry_tlb [tail] <= opcode1==`TLB; iqentry_jmp [tail] <= fetchbuf1_jmp; iqentry_jmpi [tail] <= opcode1==`JMPI || opcode1==`JMPIX; iqentry_sync [tail] <= opcode1==`SYNC; iqentry_memsb[tail] <= opcode1==`MEMSB; iqentry_memdb[tail] <= opcode1==`MEMDB; iqentry_fp [tail] <= fetchbuf1_fp; iqentry_rfw [tail] <= fetchbuf1_rfw; iqentry_tgt [tail] <= Rt1; iqentry_preg [tail] <= Pn1; iqentry_pred [tail] <= fnSpr({2'h0,Pn1},fetchbuf1_pc);//pregs[Pn1]; // Look at the previous queue slot to see if an immediate prefix is enqueued // But don't allow it for a branch iqentry_a0[tail] <= (opcode1==`INT || opcode1==`SYS) ? fnImm(fetchbuf1_instr) : fnIsBranch(opcode1) ? {{DBW-12{fetchbuf1_instr[11]}},fetchbuf1_instr[11:8],fetchbuf1_instr[23:16]} : (queued1 && opcode0==`IMM) ? {fnImmImm(fetchbuf0_instr)|fnImm8(fetchbuf1_instr)} : (!queued1 && iqentry_op[(tail-3'd1)&7]==`IMM) && iqentry_v[(tail-3'd1)&7] ? {iqentry_a0[(tail-3'd1)&7][DBW-1:8],fnImm8(fetchbuf1_instr)} : opcode1==`IMM ? fnImmImm(fetchbuf1_instr) : fnImm(fetchbuf1_instr); iqentry_a1 [tail] <= fnOpa(opcode1,Ra1,fetchbuf1_instr,rfoa1,fetchbuf1_pc); iqentry_a2 [tail] <= fnOpb(opcode1,Rb1,fetchbuf1_instr,rfob1,fetchbuf1_pc); iqentry_a3 [tail] <= rfoc1; iqentry_T [tail] <= fnOpt(Rt1,rfot1,fetchbuf1_pc); `ifdef SIMULATION iqentry_r1 [tail] <= Ra1; iqentry_r2 [tail] <= Rb1; iqentry_r3 [tail] <= Rc1; iqentry_rt [tail] <= Rt1; `endif // The source is set even though the arg might be automatically valid (less logic). If // queueing two entries the source settings may be overridden in the argument valudation. iqentry_p_s [tail] <= rf_source[{1'b1,2'h0,Pn1}]; iqentry_a1_s [tail] <= //unlink ? {1'b0, (tail-3'd1)&7} : rf_source[Ra1]; iqentry_a2_s [tail] <= rf_source[Rb1]; iqentry_a3_s [tail] <= rf_source[Rc1]; iqentry_T_s [tail] <= rf_source[Rt1]; if (validate_args) validate_args11(tail); end tail0 <= tail0 + inc; tail1 <= tail1 + inc; tail2 <= tail2 + inc; end endtask // enque 1 on tail0 or tail1 task enque1; input [2:0] tail; input [2:0] inc; input test_stomp; input validate_args; begin if (opcode1==`NOP) begin if (queued1==`TRUE) queued2 = `TRUE; queued1 = `TRUE; end `ifdef DEBUG_LOGIC else if (dbg_ctrl[7] && !StatusDBG) begin if (iqentry_v[tail]==`INV && iqentry_v[(tail+1)&7]==`INV) begin enque1a(tail,3'd2,1,0); set_exception((tail+1)&7,8'd243); allowq = `FALSE; end end `endif `ifdef STACKOPS else if (fnIsPop(fetchbuf1_instr)|fnIsPush(fetchbuf1_instr)|opcode1==`LINK) begin $display("1 found push/pop"); $display("iqv[%d]:%d", tail,iqentry_v[tail]); $display("iqv[%d+1]:%d", tail, iqentry_v[tail+1]); $display("valargs:%d", validate_args); $display("qd1:%d", queued1); if (iqentry_v[tail]==`INV && iqentry_v[(tail+1)&7]==`INV && validate_args && !queued1) begin $display("1 enq 2 "); enque1a(tail,3'd2,1,0); enquePushpopAdd((tail+1)&7,fnIsPop(fetchbuf1_instr),opcode1==`LINK,0,1); allowq = `FALSE; end end `ifdef UNLINKOP else if (opcode1==`UNLINK) begin if (iqentry_v[tail]==`INV && iqentry_v[(tail+1)&7]==`INV) begin enquePushpopAdd(tail,1'b0,1'b0,1'b1,1); enque1a((tail+1)&7,3'd2,1,1); allowq = `FALSE; end end `endif `endif else if (iqentry_v[tail] == `INV && !qstomp) begin if ((({fnIsBranch(opcode1), predict_taken1} == {`TRUE, `TRUE})||(opcode1==`LOOP)) && test_stomp) qstomp = `TRUE; enque1a(tail,inc,validate_args,0); if (queued1==`TRUE) queued2 = `TRUE; else queued1 = `TRUE; end end endtask task validate_args10; input [2:0] tail; begin iqentry_p_v [tail] <= rf_v [{1'b1,2'h0,Pn0}] || cond0 < 4'h2; iqentry_a1_v [tail] <= fnSource1_v( opcode0 ) | rf_v[ Ra0 ]; iqentry_a2_v [tail] <= fnSource2_v( opcode0, fnFunc(fetchbuf0_instr)) | rf_v[Rb0]; iqentry_a3_v [tail] <= fnSource3_v( opcode0, fnFunc(fetchbuf0_instr)) | rf_v[ Rc0 ]; iqentry_T_v [tail] <= fnSourceT_v( opcode0, fnFunc(fetchbuf0_instr)) | rf_v[ Rt0 ]; if (fetchbuf0_rfw|fetchbuf0_pfw) begin $display("regv[%d] = %d", Rt0,rf_v[ Rt0 ]); rf_v[ Rt0 ] = fnRegIsAutoValid(Rt0); $display("reg[%d] <= INV",Rt0); rf_source[ Rt0 ] <= { fetchbuf0_mem, tail }; // top bit indicates ALU/MEM bus $display("10:rf_src[%d] <= %d, insn=%h", Rt0, tail,fetchbuf0_instr); invalidate_pregs(tail, Rt0, fetchbuf0_mem); end end endtask task validate_args11; input [2:0] tail; begin // The predicate is automatically valid for condiitions 0 and 1 (always false or always true). iqentry_p_v [tail] <= rf_v [{1'b1,2'h0,Pn1}] || cond1 < 4'h2; iqentry_a1_v [tail] <= fnSource1_v( opcode1 ) | rf_v[ Ra1 ]; iqentry_a2_v [tail] <= fnSource2_v( opcode1, fnFunc(fetchbuf1_instr)) | rf_v[ Rb1 ]; iqentry_a3_v [tail] <= fnSource3_v( opcode1, fnFunc(fetchbuf1_instr)) | rf_v[ Rc1 ]; iqentry_T_v [tail] <= fnSourceT_v( opcode1, fnFunc(fetchbuf1_instr)) | rf_v[ Rt1 ]; if (fetchbuf1_rfw|fetchbuf1_pfw) begin $display("1:regv[%d] = %d", Rt1,rf_v[ Rt1 ]); rf_v[ Rt1 ] = fnRegIsAutoValid(Rt1); $display("reg[%d] <= INV",Rt1); rf_source[ Rt1 ] <= { fetchbuf1_mem, tail }; // top bit indicates ALU/MEM bus invalidate_pregs(tail, Rt1, fetchbuf1_mem); $display("11:rf_src[%d] <= %d, insn=%h", Rt1, tail,fetchbuf0_instr); end end endtask // If two entries were queued then validate the arguments for the second entry. // task validate_args; begin if (queued2) begin // SOURCE 1 ... this is relatively straightforward, because all instructions // that have a source (i.e. every instruction but LUI) read from RB // // if the argument is an immediate or not needed, we're done if (fnSource1_v( opcode1 ) == `VAL) begin $display("fnSource1_v=1 iq[%d]", tail1); iqentry_a1_v [tail1] <= `VAL; iqentry_a1_s [tail1] <= 4'hF; // iqentry_a1_s [tail1] <= 4'd0; end // if previous instruction writes nothing to RF, then get info from rf_v and rf_source else if (!fetchbuf0_rfw) begin iqentry_a1_v [tail1] <= rf_v [Ra1]; iqentry_a1_s [tail1] <= rf_source [Ra1]; end // otherwise, previous instruction does write to RF ... see if overlap else if (Rt0 != 7'd0 && Ra1 == Rt0) begin // if the previous instruction is a LW, then grab result from memq, not the iq $display("invalidating iqentry_a1_v[%d]", tail1); iqentry_a1_v [tail1] <= `INV; iqentry_a1_s [tail1] <= {fetchbuf0_mem, tail0}; end // if no overlap, get info from rf_v and rf_source else begin iqentry_a1_v [tail1] <= rf_v [Ra1]; iqentry_a1_s [tail1] <= rf_source [Ra1]; $display("2:iqentry_a1_s[%d] <= %d", tail1, rf_source [Ra1]); end if (!fetchbuf0_pfw) begin iqentry_p_v [tail1] <= rf_v [{1'b1,2'h0,Pn1}] || cond1 < 4'h2; iqentry_p_s [tail1] <= rf_source [{1'b1,2'h0,Pn1}]; end else if ((Rt0 != 7'd0 && (Pn1==Rt0[3:0] || Rt0==7'h70)) && ((Rt0 & 7'h70)==7'h40)||Rt0==7'h70) begin iqentry_p_v [tail1] <= cond1 < 4'h2; iqentry_p_s [tail1] <= {fetchbuf0_mem, tail0}; end else begin iqentry_p_v [tail1] <= rf_v[{1'b1,2'h0,Pn1}] || cond1 < 4'h2; iqentry_p_s [tail1] <= rf_source[{1'b1,2'h0,Pn1}]; end // // SOURCE 2 ... this is more contorted than the logic for SOURCE 1 because // some instructions (NAND and ADD) read from RC and others (SW, BEQ) read from RA // // if the argument is an immediate or not needed, we're done if (fnSource2_v( opcode1,fnFunc(fetchbuf1_instr) ) == `VAL) begin iqentry_a2_v [tail1] <= `VAL; iqentry_a2_s [tail1] <= 4'hF; end // if previous instruction writes nothing to RF, then get info from rf_v and rf_source else if (!fetchbuf0_rfw) begin iqentry_a2_v [tail1] <= rf_v[ Rb1 ]; iqentry_a2_s [tail1] <= rf_source[Rb1]; end // otherwise, previous instruction does write to RF ... see if overlap else if (Rt0 != 7'd0 && Rb1 == Rt0) begin // if the previous instruction is a LW, then grab result from memq, not the iq iqentry_a2_v [tail1] <= `INV; iqentry_a2_s [tail1] <= {fetchbuf0_mem,tail0}; end // if no overlap, get info from rf_v and rf_source else begin iqentry_a2_v [tail1] <= rf_v[ Rb1 ]; iqentry_a2_s [tail1] <= rf_source[Rb1]; end // // SOURCE 3 ... this is relatively straightforward, because all instructions // that have a source (i.e. every instruction but LUI) read from RC // // if the argument is an immediate or not needed, we're done if (fnSource3_v( opcode1,fnFunc(fetchbuf1_instr) ) == `VAL) begin iqentry_a3_v [tail1] <= `VAL; iqentry_a3_v [tail1] <= 4'hF; // iqentry_a1_s [tail1] <= 4'd0; end // if previous instruction writes nothing to RF, then get info from rf_v and rf_source else if (!fetchbuf0_rfw) begin iqentry_a3_v [tail1] <= rf_v [Rc1]; iqentry_a3_s [tail1] <= rf_source [Rc1]; end // otherwise, previous instruction does write to RF ... see if overlap else if (Rt0 != 7'd0 && Rc1 == Rt0) begin // if the previous instruction is a LW, then grab result from memq, not the iq iqentry_a3_v [tail1] <= `INV; iqentry_a3_s [tail1] <= {fetchbuf0_mem,tail0}; end // if no overlap, get info from rf_v and rf_source else begin iqentry_a3_v [tail1] <= rf_v [Rc1]; iqentry_a3_s [tail1] <= rf_source [Rc1]; end // // Target 3 ... this is relatively straightforward, because all instructions // that have a source (i.e. every instruction but LUI) read from RC // // if the argument is an immediate or not needed, we're done if (fnSourceT_v( opcode1,fnFunc(fetchbuf1_instr) ) == `VAL) begin iqentry_T_v [tail1] <= `VAL; iqentry_T_v [tail1] <= 4'hF; end // if previous instruction writes nothing to RF, then get info from rf_v and rf_source else if (!fetchbuf0_rfw) begin iqentry_T_v [tail1] <= rf_v [Rt1]; iqentry_T_s [tail1] <= rf_source [Rt1]; end // otherwise, previous instruction does write to RF ... see if overlap else if (Rt0 != 7'd0 && Rt1 == Rt0) begin // if the previous instruction is a LW, then grab result from memq, not the iq iqentry_T_v [tail1] <= `INV; iqentry_T_s [tail1] <= {fetchbuf0_mem,tail0}; end // if no overlap, get info from rf_v and rf_source else begin iqentry_T_v [tail1] <= rf_v [Rt1]; iqentry_T_s [tail1] <= rf_source [Rt1]; end end if (queued1|queued2) begin if (fetchbuf0_rfw|fetchbuf0_pfw) begin $display("regv[%d] = %d", Rt0,rf_v[ Rt0 ]); rf_v[ Rt0 ] = fnRegIsAutoValid(Rt0); $display("reg[%d] <= INV",Rt0); rf_source[ Rt0 ] <= { fetchbuf0_mem, tail0 }; // top bit indicates ALU/MEM bus $display("12:rf_src[%d] <= %d, insn=%h", Rt0, tail0,fetchbuf0_instr); invalidate_pregs(tail0, Rt0, fetchbuf0_mem); end end if (queued2) begin if (fetchbuf1_rfw|fetchbuf1_pfw) begin $display("1:regv[%d] = %d", Rt1,rf_v[ Rt1 ]); rf_v[ Rt1 ] = fnRegIsAutoValid(Rt1); $display("reg[%d] <= INV",Rt1); rf_source[ Rt1 ] <= { fetchbuf1_mem, tail1 }; // top bit indicates ALU/MEM bus invalidate_pregs(tail1, Rt1, fetchbuf1_mem); end end end endtask task fetchAB; begin fetchbufA_instr <= insn0; fetchbufA_pc <= pc; fetchbufA_v <= ld_fetchbuf; fetchbufB_instr <= insn1; fetchbufB_pc <= pc + fnInsnLength(insn); fetchbufB_v <= ld_fetchbuf; end endtask task fetchCD; begin fetchbufC_instr <= insn0; fetchbufC_pc <= pc; fetchbufC_v <= ld_fetchbuf; fetchbufD_instr <= insn1; fetchbufD_pc <= pc + fnInsnLength(insn); fetchbufD_v <= ld_fetchbuf; end endtask // Reset the tail pointers. // Used by the enqueue logic // task reset_tail_pointers; input first; begin if ((iqentry_stomp[0] & ~iqentry_stomp[7]) | first) begin tail0 <= 0; tail1 <= 1; end else if (iqentry_stomp[1] & ~iqentry_stomp[0]) begin tail0 <= 1; tail1 <= 2; end else if (iqentry_stomp[2] & ~iqentry_stomp[1]) begin tail0 <= 2; tail1 <= 3; end else if (iqentry_stomp[3] & ~iqentry_stomp[2]) begin tail0 <= 3; tail1 <= 4; end else if (iqentry_stomp[4] & ~iqentry_stomp[3]) begin tail0 <= 4; tail1 <= 5; end else if (iqentry_stomp[5] & ~iqentry_stomp[4]) begin tail0 <= 5; tail1 <= 6; end else if (iqentry_stomp[6] & ~iqentry_stomp[5]) begin tail0 <= 6; tail1 <= 7; end else if (iqentry_stomp[7] & ~iqentry_stomp[6]) begin tail0 <= 7; tail1 <= 0; end // otherwise, it is the last instruction in the queue that has been mispredicted ... do nothing end endtask // Increment the head pointers // Also increments the instruction counter // Used when instructions are committed. // Also clear any outstanding state bits that foul things up. // task head_inc; input [2:0] amt; begin head0 <= head0 + amt; head1 <= head1 + amt; head2 <= head2 + amt; head3 <= head3 + amt; head4 <= head4 + amt; head5 <= head5 + amt; head6 <= head6 + amt; head7 <= head7 + amt; I <= I + amt; if (amt==3'd3) begin iqentry_agen[head0] <= `INV; iqentry_agen[head1] <= `INV; iqentry_agen[head2] <= `INV; end else if (amt==3'd2) begin iqentry_agen[head0] <= `INV; iqentry_agen[head1] <= `INV; end else if (amt==3'd1) iqentry_agen[head0] <= `INV; end endtask // set_exception: // Used to requeue the instruction as an exception if an exception occurs. task set_exception; input [2:0] id; // instruction queue id input [7:0] exc; // exception number begin iqentry_op [id[2:0] ] <= `INT; iqentry_cond [id[2:0]] <= 4'd1; // always execute iqentry_mem[id[2:0]] <= `FALSE; iqentry_rfw[id[2:0]] <= `TRUE; // writes to IPC iqentry_a0 [id[2:0]] <= exc; iqentry_p_v [id[2:0]] <= `TRUE; iqentry_a1 [id[2:0]] <= cregs[4'hC]; // *** assumes BR12 is static iqentry_a1_v [id[2:0]] <= `TRUE; // Flag arguments as valid iqentry_a2_v [id[2:0]] <= `TRUE; iqentry_a3_v [id[2:0]] <= `TRUE; iqentry_T_v [id[2:0]] <= `TRUE; iqentry_out [id[2:0]] <= `FALSE; iqentry_agen [id[2:0]] <= `FALSE; iqentry_tgt[id[2:0]] <= {1'b1,2'h1,(exc==8'd243)?4'hB:4'hD}; // Target EPC exception_set = `TRUE; end endtask // The core should really invalidate all the predicate registers when the // sideways slice of all the pregs is manipulated. But then the problem is // reading the result register into all the predicate registers at once. // The source for each register would be a bit field of the result register // and the core does not support this sort of thing. // So. After manipulating the sideways slice of predicate registers the // instruction should be followed with a SYNC instruction to ensure that // the results are picked up. // To be fixed one day. task invalidate_pregs; input [2:0] tail; input [6:0] Rt; input mem; begin if (Rt==7'h70) begin rf_v[7'h40] = `INV; rf_v[7'h41] = `INV; rf_v[7'h42] = `INV; rf_v[7'h43] = `INV; rf_v[7'h44] = `INV; rf_v[7'h45] = `INV; rf_v[7'h46] = `INV; rf_v[7'h47] = `INV; rf_v[7'h48] = `INV; rf_v[7'h49] = `INV; rf_v[7'h4A] = `INV; rf_v[7'h4B] = `INV; rf_v[7'h4C] = `INV; rf_v[7'h4D] = `INV; rf_v[7'h4E] = `INV; rf_v[7'h4F] = `INV; rf_source[7'h40] <= { mem, tail }; rf_source[7'h41] <= { mem, tail }; rf_source[7'h42] <= { mem, tail }; rf_source[7'h43] <= { mem, tail }; rf_source[7'h44] <= { mem, tail }; rf_source[7'h45] <= { mem, tail }; rf_source[7'h46] <= { mem, tail }; rf_source[7'h47] <= { mem, tail }; rf_source[7'h48] <= { mem, tail }; rf_source[7'h49] <= { mem, tail }; rf_source[7'h4A] <= { mem, tail }; rf_source[7'h4B] <= { mem, tail }; rf_source[7'h4C] <= { mem, tail }; rf_source[7'h4D] <= { mem, tail }; rf_source[7'h4E] <= { mem, tail }; rf_source[7'h4F] <= { mem, tail }; end end endtask endmodule
Go to most recent revision | Compare with Previous | Blame | View Log