URL
https://opencores.org/ocsvn/thor/thor/trunk
Subversion Repositories thor
[/] [thor/] [trunk/] [rtl/] [verilog/] [Thor_dcachemem_1w1r.v] - Rev 63
Go to most recent revision | Compare with Previous | Blame | View Log
// ============================================================================ // __ // \\__/ o\ (C) 2013 Robert Finch, Stratford // \ __ / All rights reserved. // \/_// robfinch<remove>@finitron.ca // || // // This source file is free software: you can redistribute it and/or modify // it under the terms of the GNU Lesser General Public License as published // by the Free Software Foundation, either version 3 of the License, or // (at your option) any later version. // // This source file is distributed in the hope that it will be useful, // but WITHOUT ANY WARRANTY; without even the implied warranty of // MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the // GNU General Public License for more details. // // You should have received a copy of the GNU General Public License // along with this program. If not, see <http://www.gnu.org/licenses/>. // // // Tri-ported data cache memory. (2 read, 1 write) // // ============================================================================ // module Thor_dcachemem_1w1r(wclk, wce, wr, sel, wa, wd, rclk, rce, ra, o); parameter DBW=64; input wclk; input wce; input wr; input [DBW/8-1:0] sel; input [DBW-1:0] wa; input [DBW-1:0] wd; input rclk; input rce; input [DBW-1:0] ra; output [DBW-1:0] o; wire [DBW-1:0] o0, o1, o2; genvar n; generate for (n = 0; n < DBW/8; n = n + 1) begin : BRAMS if (DBW==64) syncRam2kx8_1rw1r uga ( .wclk(wclk), .wce(wce), .wr(wr & sel[n]), .wa(wa[13:3]), .wd(wd[n*8+7:n*8]), .rclk(rclk), .rce(rce), .ra(ra[13:3]), .o(o[n*8+7:n*8]) ); else begin syncRam2kx8_1rw1r uga ( .wclk(wclk), .wce(wce), .wr(wr & sel[n]), .wa(wa[12:2]), .wd(wd[n*8+7:n*8]), .rclk(rclk), .rce(rce), .ra(ra[12:2]), .o(o0[n*8+7:n*8]) ); end end endgenerate assign o = o0; always @(posedge wclk) begin if (wce & wr & |sel) begin $display("*************************"); $display("*************************"); $display("Writing to DCACHE %h=%h", wa, wd); $display("*************************"); $display("*************************"); end end endmodule module syncRam2kx8_1rw1r (wclk, wce, wr, wa, wd, rclk, rce, ra, o); input wclk; input wce; input wr; input [10:0] wa; input [7:0] wd; input rclk; input rce; input [10:0] ra; output [7:0] o; reg [7:0] mem [0:2047]; reg [10:0] rra; integer n; initial begin for (n = 0; n < 2048; n = n + 1) mem[n] <= 0; end always @(posedge wclk) if (wce & wr) mem[wa] <= wd; always @(posedge rclk) if (rce) rra <= ra; assign o = mem[rra]; endmodule
Go to most recent revision | Compare with Previous | Blame | View Log