Subversion Repositories tiny_aes

/*
 * Copyright 2012, Homer Hsing <homer.hsing@gmail.com>
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
 
/* one AES round for every two clock cycles */
module one_round (clk, state_in, key, state_out);
    input              clk;
    input      [127:0] state_in, key;
    output reg [127:0] state_out;
    wire       [31:0]  s0,  s1,  s2,  s3,
                       z0,  z1,  z2,  z3,
                       p00, p01, p02, p03,
                       p10, p11, p12, p13,
                       p20, p21, p22, p23,
                       p30, p31, p32, p33,
                       k0,  k1,  k2,  k3;
 
    assign {k0, k1, k2, k3} = key;
 
    assign {s0, s1, s2, s3} = state_in;
 
    table_lookup
        t0 (clk, s0, p00, p01, p02, p03),
        t1 (clk, s1, p10, p11, p12, p13),
        t2 (clk, s2, p20, p21, p22, p23),
        t3 (clk, s3, p30, p31, p32, p33);
 
    assign z0 = p00 ^ p11 ^ p22 ^ p33 ^ k0;
    assign z1 = p03 ^ p10 ^ p21 ^ p32 ^ k1;
    assign z2 = p02 ^ p13 ^ p20 ^ p31 ^ k2;
    assign z3 = p01 ^ p12 ^ p23 ^ p30 ^ k3;
 
    always @ (posedge clk)
        state_out <= {z0, z1, z2, z3};
endmodule
 
/* AES final round for every two clock cycles */
module final_round (clk, state_in, key_in, state_out);
    input              clk;
    input      [127:0] state_in;
    input      [127:0] key_in;
    output reg [127:0] state_out;
    wire [31:0] s0,  s1,  s2,  s3,
                z0,  z1,  z2,  z3,
                k0,  k1,  k2,  k3;
    wire [7:0]  p00, p01, p02, p03,
                p10, p11, p12, p13,
                p20, p21, p22, p23,
                p30, p31, p32, p33;
 
    assign {k0, k1, k2, k3} = key_in;
 
    assign {s0, s1, s2, s3} = state_in;
 
    S4
        S4_1 (clk, s0, {p00, p01, p02, p03}),
        S4_2 (clk, s1, {p10, p11, p12, p13}),
        S4_3 (clk, s2, {p20, p21, p22, p23}),
        S4_4 (clk, s3, {p30, p31, p32, p33});
 
    assign z0 = {p00, p11, p22, p33} ^ k0;
    assign z1 = {p10, p21, p32, p03} ^ k1;
    assign z2 = {p20, p31, p02, p13} ^ k2;
    assign z3 = {p30, p01, p12, p23} ^ k3;
 
    always @ (posedge clk)
        state_out <= {z0, z1, z2, z3};
endmodule