URL
https://opencores.org/ocsvn/tinyvliw8/tinyvliw8/trunk
Subversion Repositories tinyvliw8
[/] [tinyvliw8/] [trunk/] [design/] [AlteraDK1/] [instMem.vhd] - Rev 4
Go to most recent revision | Compare with Previous | Blame | View Log
-- megafunction wizard: %RAM: 1-PORT% -- GENERATION: STANDARD -- VERSION: WM1.0 -- MODULE: altsyncram -- ============================================================ -- File Name: instMem.vhd -- Megafunction Name(s): -- altsyncram -- -- Simulation Library Files(s): -- altera_mf -- ============================================================ -- ************************************************************ -- THIS IS A WIZARD-GENERATED FILE. DO NOT EDIT THIS FILE! -- -- 11.0 Build 208 07/03/2011 SP 1 SJ Web Edition -- ************************************************************ --Copyright (C) 1991-2011 Altera Corporation --Your use of Altera Corporation's design tools, logic functions --and other software and tools, and its AMPP partner logic --functions, and any output files from any of the foregoing --(including device programming or simulation files), and any --associated documentation or information are expressly subject --to the terms and conditions of the Altera Program License --Subscription Agreement, Altera MegaCore Function License --Agreement, or other applicable license agreement, including, --without limitation, that your use is for the sole purpose of --programming logic devices manufactured by Altera and sold by --Altera or its authorized distributors. Please refer to the --applicable agreement for further details. LIBRARY ieee; USE ieee.std_logic_1164.all; LIBRARY altera_mf; USE altera_mf.all; ENTITY instMem IS PORT ( address : IN STD_LOGIC_VECTOR (10 DOWNTO 0); data : IN STD_LOGIC_VECTOR (31 DOWNTO 0); inclock : IN STD_LOGIC := '1'; outclock : IN STD_LOGIC ; wren : IN STD_LOGIC ; q : OUT STD_LOGIC_VECTOR (31 DOWNTO 0) ); END instMem; ARCHITECTURE SYN OF instmem IS SIGNAL sub_wire0 : STD_LOGIC_VECTOR (31 DOWNTO 0); COMPONENT altsyncram GENERIC ( clock_enable_input_a : STRING; clock_enable_output_a : STRING; intended_device_family : STRING; lpm_type : STRING; numwords_a : NATURAL; operation_mode : STRING; outdata_aclr_a : STRING; outdata_reg_a : STRING; power_up_uninitialized : STRING; widthad_a : NATURAL; width_a : NATURAL; width_byteena_a : NATURAL ); PORT ( address_a : IN STD_LOGIC_VECTOR (10 DOWNTO 0); clock0 : IN STD_LOGIC ; data_a : IN STD_LOGIC_VECTOR (31 DOWNTO 0); wren_a : IN STD_LOGIC ; clock1 : IN STD_LOGIC ; q_a : OUT STD_LOGIC_VECTOR (31 DOWNTO 0) ); END COMPONENT; BEGIN q <= sub_wire0(31 DOWNTO 0); altsyncram_component : altsyncram GENERIC MAP ( clock_enable_input_a => "BYPASS", clock_enable_output_a => "BYPASS", intended_device_family => "Cyclone II", lpm_type => "altsyncram", numwords_a => 2048, operation_mode => "SINGLE_PORT", outdata_aclr_a => "NONE", outdata_reg_a => "CLOCK1", power_up_uninitialized => "FALSE", widthad_a => 11, width_a => 32, width_byteena_a => 1 ) PORT MAP ( address_a => address, clock0 => inclock, data_a => data, wren_a => wren, clock1 => outclock, q_a => sub_wire0 ); END SYN; -- ============================================================ -- CNX file retrieval info -- ============================================================ -- Retrieval info: PRIVATE: ADDRESSSTALL_A NUMERIC "0" -- Retrieval info: PRIVATE: AclrAddr NUMERIC "0" -- Retrieval info: PRIVATE: AclrByte NUMERIC "0" -- Retrieval info: PRIVATE: AclrData NUMERIC "0" -- Retrieval info: PRIVATE: AclrOutput NUMERIC "0" -- Retrieval info: PRIVATE: BYTE_ENABLE NUMERIC "0" -- Retrieval info: PRIVATE: BYTE_SIZE NUMERIC "8" -- Retrieval info: PRIVATE: BlankMemory NUMERIC "1" -- Retrieval info: PRIVATE: CLOCK_ENABLE_INPUT_A NUMERIC "0" -- Retrieval info: PRIVATE: CLOCK_ENABLE_OUTPUT_A NUMERIC "0" -- Retrieval info: PRIVATE: Clken NUMERIC "0" -- Retrieval info: PRIVATE: DataBusSeparated NUMERIC "1" -- Retrieval info: PRIVATE: IMPLEMENT_IN_LES NUMERIC "0" -- Retrieval info: PRIVATE: INIT_FILE_LAYOUT STRING "PORT_A" -- Retrieval info: PRIVATE: INIT_TO_SIM_X NUMERIC "0" -- Retrieval info: PRIVATE: INTENDED_DEVICE_FAMILY STRING "Cyclone II" -- Retrieval info: PRIVATE: JTAG_ENABLED NUMERIC "0" -- Retrieval info: PRIVATE: JTAG_ID STRING "NONE" -- Retrieval info: PRIVATE: MAXIMUM_DEPTH NUMERIC "0" -- Retrieval info: PRIVATE: MIFfilename STRING "" -- Retrieval info: PRIVATE: NUMWORDS_A NUMERIC "2048" -- Retrieval info: PRIVATE: RAM_BLOCK_TYPE NUMERIC "0" -- Retrieval info: PRIVATE: READ_DURING_WRITE_MODE_PORT_A NUMERIC "3" -- Retrieval info: PRIVATE: RegAddr NUMERIC "1" -- Retrieval info: PRIVATE: RegData NUMERIC "1" -- Retrieval info: PRIVATE: RegOutput NUMERIC "1" -- Retrieval info: PRIVATE: SYNTH_WRAPPER_GEN_POSTFIX STRING "0" -- Retrieval info: PRIVATE: SingleClock NUMERIC "0" -- Retrieval info: PRIVATE: UseDQRAM NUMERIC "1" -- Retrieval info: PRIVATE: WRCONTROL_ACLR_A NUMERIC "0" -- Retrieval info: PRIVATE: WidthAddr NUMERIC "11" -- Retrieval info: PRIVATE: WidthData NUMERIC "32" -- Retrieval info: PRIVATE: rden NUMERIC "0" -- Retrieval info: LIBRARY: altera_mf altera_mf.altera_mf_components.all -- Retrieval info: CONSTANT: CLOCK_ENABLE_INPUT_A STRING "BYPASS" -- Retrieval info: CONSTANT: CLOCK_ENABLE_OUTPUT_A STRING "BYPASS" -- Retrieval info: CONSTANT: INTENDED_DEVICE_FAMILY STRING "Cyclone II" -- Retrieval info: CONSTANT: LPM_TYPE STRING "altsyncram" -- Retrieval info: CONSTANT: NUMWORDS_A NUMERIC "2048" -- Retrieval info: CONSTANT: OPERATION_MODE STRING "SINGLE_PORT" -- Retrieval info: CONSTANT: OUTDATA_ACLR_A STRING "NONE" -- Retrieval info: CONSTANT: OUTDATA_REG_A STRING "CLOCK1" -- Retrieval info: CONSTANT: POWER_UP_UNINITIALIZED STRING "FALSE" -- Retrieval info: CONSTANT: WIDTHAD_A NUMERIC "11" -- Retrieval info: CONSTANT: WIDTH_A NUMERIC "32" -- Retrieval info: CONSTANT: WIDTH_BYTEENA_A NUMERIC "1" -- Retrieval info: USED_PORT: address 0 0 11 0 INPUT NODEFVAL "address[10..0]" -- Retrieval info: USED_PORT: data 0 0 32 0 INPUT NODEFVAL "data[31..0]" -- Retrieval info: USED_PORT: inclock 0 0 0 0 INPUT VCC "inclock" -- Retrieval info: USED_PORT: outclock 0 0 0 0 INPUT NODEFVAL "outclock" -- Retrieval info: USED_PORT: q 0 0 32 0 OUTPUT NODEFVAL "q[31..0]" -- Retrieval info: USED_PORT: wren 0 0 0 0 INPUT NODEFVAL "wren" -- Retrieval info: CONNECT: @address_a 0 0 11 0 address 0 0 11 0 -- Retrieval info: CONNECT: @clock0 0 0 0 0 inclock 0 0 0 0 -- Retrieval info: CONNECT: @clock1 0 0 0 0 outclock 0 0 0 0 -- Retrieval info: CONNECT: @data_a 0 0 32 0 data 0 0 32 0 -- Retrieval info: CONNECT: @wren_a 0 0 0 0 wren 0 0 0 0 -- Retrieval info: CONNECT: q 0 0 32 0 @q_a 0 0 32 0 -- Retrieval info: GEN_FILE: TYPE_NORMAL instMem.vhd TRUE -- Retrieval info: GEN_FILE: TYPE_NORMAL instMem.inc FALSE -- Retrieval info: GEN_FILE: TYPE_NORMAL instMem.cmp TRUE -- Retrieval info: GEN_FILE: TYPE_NORMAL instMem.bsf FALSE -- Retrieval info: GEN_FILE: TYPE_NORMAL instMem_inst.vhd TRUE -- Retrieval info: LIB_FILE: altera_mf
Go to most recent revision | Compare with Previous | Blame | View Log