URL
https://opencores.org/ocsvn/turbo8051/turbo8051/trunk
Subversion Repositories turbo8051
[/] [turbo8051/] [trunk/] [rtl/] [8051/] [oc8051_ports.v] - Rev 23
Go to most recent revision | Compare with Previous | Blame | View Log
////////////////////////////////////////////////////////////////////// //// //// //// 8051 port output //// //// //// //// This file is part of the 8051 cores project //// //// http://www.opencores.org/cores/8051/ //// //// //// //// Description //// //// 8051 special function registers: port 0:3 - output //// //// //// //// To Do: //// //// nothing //// //// //// //// Author(s): //// //// - Simon Teran, simont@opencores.org //// //// //// ////////////////////////////////////////////////////////////////////// //// //// //// Copyright (C) 2000 Authors and OPENCORES.ORG //// //// //// //// This source file may be used and distributed without //// //// restriction provided that this copyright statement is not //// //// removed from the file and that any derivative work contains //// //// the original copyright notice and the associated disclaimer. //// //// //// //// This source file is free software; you can redistribute it //// //// and/or modify it under the terms of the GNU Lesser General //// //// Public License as published by the Free Software Foundation; //// //// either version 2.1 of the License, or (at your option) any //// //// later version. //// //// //// //// This source is distributed in the hope that it will be //// //// useful, but WITHOUT ANY WARRANTY; without even the implied //// //// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR //// //// PURPOSE. See the GNU Lesser General Public License for more //// //// details. //// //// //// //// You should have received a copy of the GNU Lesser General //// //// Public License along with this source; if not, download it //// //// from http://www.opencores.org/lgpl.shtml //// //// //// ////////////////////////////////////////////////////////////////////// // // CVS Revision History // // $Log: not supported by cvs2svn $ // Revision 1.9 2003/04/10 12:43:19 simont // defines for pherypherals added // // Revision 1.8 2003/04/07 14:58:02 simont // change sfr's interface. // // Revision 1.7 2003/01/13 14:14:41 simont // replace some modules // // Revision 1.6 2002/09/30 17:33:59 simont // prepared header // // // synopsys translate_off `include "oc8051_timescale.v" // synopsys translate_on `include "oc8051_defines.v" module oc8051_ports (clk, rst, bit_in, data_in, wr, wr_bit, wr_addr, `ifdef OC8051_PORT0 p0_out, p0_in, p0_data, `endif `ifdef OC8051_PORT1 p1_out, p1_in, p1_data, `endif `ifdef OC8051_PORT2 p2_out, p2_in, p2_data, `endif `ifdef OC8051_PORT3 p3_out, p3_in, p3_data, `endif rmw); input clk, //clock rst, //reset wr, //write [oc8051_decoder.wr -r] wr_bit, //write bit addresable [oc8051_decoder.bit_addr -r] bit_in, //bit input [oc8051_alu.desCy] rmw; //read modify write feature [oc8051_decoder.rmw] input [7:0] wr_addr, //write address [oc8051_ram_wr_sel.out] data_in; //data input (from alu destiantion 1) [oc8051_alu.des1] `ifdef OC8051_PORT0 input [7:0] p0_in; output [7:0] p0_out, p0_data; reg [7:0] p0_out; assign p0_data = rmw ? p0_out : p0_in; `endif `ifdef OC8051_PORT1 input [7:0] p1_in; output [7:0] p1_out, p1_data; reg [7:0] p1_out; assign p1_data = rmw ? p1_out : p1_in; `endif `ifdef OC8051_PORT2 input [7:0] p2_in; output [7:0] p2_out, p2_data; reg [7:0] p2_out; assign p2_data = rmw ? p2_out : p2_in; `endif `ifdef OC8051_PORT3 input [7:0] p3_in; output [7:0] p3_out, p3_data; reg [7:0] p3_out; assign p3_data = rmw ? p3_out : p3_in; `endif // // case of writing to port always @(posedge clk or posedge rst) begin if (rst) begin `ifdef OC8051_PORT0 p0_out <= #1 `OC8051_RST_P0; `endif `ifdef OC8051_PORT1 p1_out <= #1 `OC8051_RST_P1; `endif `ifdef OC8051_PORT2 p2_out <= #1 `OC8051_RST_P2; `endif `ifdef OC8051_PORT3 p3_out <= #1 `OC8051_RST_P3; `endif end else if (wr) begin if (!wr_bit) begin case (wr_addr) /* synopsys full_case parallel_case */ // // bytaddresable `ifdef OC8051_PORT0 `OC8051_SFR_P0: begin p0_out <= #1 data_in; end `endif `ifdef OC8051_PORT1 `OC8051_SFR_P1: p1_out <= #1 data_in; `endif `ifdef OC8051_PORT2 `OC8051_SFR_P2: p2_out <= #1 data_in; `endif `ifdef OC8051_PORT3 `OC8051_SFR_P3: p3_out <= #1 data_in; `endif endcase end else begin case (wr_addr[7:3]) /* synopsys full_case parallel_case */ // // bit addressable `ifdef OC8051_PORT0 `OC8051_SFR_B_P0: p0_out[wr_addr[2:0]] <= #1 bit_in; `endif `ifdef OC8051_PORT1 `OC8051_SFR_B_P1: p1_out[wr_addr[2:0]] <= #1 bit_in; `endif `ifdef OC8051_PORT2 `OC8051_SFR_B_P2: p2_out[wr_addr[2:0]] <= #1 bit_in; `endif `ifdef OC8051_PORT3 `OC8051_SFR_B_P3: p3_out[wr_addr[2:0]] <= #1 bit_in; `endif endcase end end end endmodule
Go to most recent revision | Compare with Previous | Blame | View Log