URL
https://opencores.org/ocsvn/turbo8051/turbo8051/trunk
Subversion Repositories turbo8051
[/] [turbo8051/] [trunk/] [rtl/] [8051/] [oc8051_ram_top.v] - Rev 17
Go to most recent revision | Compare with Previous | Blame | View Log
////////////////////////////////////////////////////////////////////// //// //// //// 8051 data ram //// //// //// //// This file is part of the 8051 cores project //// //// http://www.opencores.org/cores/8051/ //// //// //// //// Description //// //// data ram //// //// //// //// To Do: //// //// nothing //// //// //// //// Author(s): //// //// - Simon Teran, simont@opencores.org //// //// //// ////////////////////////////////////////////////////////////////////// //// //// //// Copyright (C) 2000 Authors and OPENCORES.ORG //// //// //// //// This source file may be used and distributed without //// //// restriction provided that this copyright statement is not //// //// removed from the file and that any derivative work contains //// //// the original copyright notice and the associated disclaimer. //// //// //// //// This source file is free software; you can redistribute it //// //// and/or modify it under the terms of the GNU Lesser General //// //// Public License as published by the Free Software Foundation; //// //// either version 2.1 of the License, or (at your option) any //// //// later version. //// //// //// //// This source is distributed in the hope that it will be //// //// useful, but WITHOUT ANY WARRANTY; without even the implied //// //// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR //// //// PURPOSE. See the GNU Lesser General Public License for more //// //// details. //// //// //// //// You should have received a copy of the GNU Lesser General //// //// Public License along with this source; if not, download it //// //// from http://www.opencores.org/lgpl.shtml //// //// //// ////////////////////////////////////////////////////////////////////// // // CVS Revision History // // $Log: not supported by cvs2svn $ // Revision 1.10 2003/06/20 13:36:37 simont // ram modules added. // // Revision 1.9 2003/06/17 14:17:22 simont // BIST signals added. // // Revision 1.8 2003/04/02 16:12:04 simont // generic_dpram used // // Revision 1.7 2003/04/02 11:26:21 simont // updating... // // Revision 1.6 2003/01/26 14:19:22 rherveille // Replaced oc8051_ram by generic_dpram. // // Revision 1.5 2003/01/13 14:14:41 simont // replace some modules // // Revision 1.4 2002/09/30 17:33:59 simont // prepared header // // // synopsys translate_off `include "oc8051_timescale.v" // synopsys translate_on `include "oc8051_defines.v" module oc8051_ram_top (clk, rst, rd_addr, rd_data, wr_addr, bit_addr, wr_data, wr, bit_data_in, bit_data_out `ifdef OC8051_BIST , scanb_rst, scanb_clk, scanb_si, scanb_so, scanb_en `endif ); // on-chip ram-size (2**ram_aw bytes) parameter ram_aw = 8; // default 256 bytes // // clk (in) clock // rd_addr (in) read addres [oc8051_ram_rd_sel.out] // rd_data (out) read data [oc8051_ram_sel.in_ram] // wr_addr (in) write addres [oc8051_ram_wr_sel.out] // bit_addr (in) bit addresable instruction [oc8051_decoder.bit_addr -r] // wr_data (in) write data [oc8051_alu.des1] // wr (in) write [oc8051_decoder.wr -r] // bit_data_in (in) bit data input [oc8051_alu.desCy] // bit_data_out (out) bit data output [oc8051_ram_sel.bit_in] // input clk, wr, bit_addr, bit_data_in, rst; input [7:0] wr_data; input [7:0] rd_addr, wr_addr; output bit_data_out; output [7:0] rd_data; `ifdef OC8051_BIST input scanb_rst; input scanb_clk; input scanb_si; output scanb_so; input scanb_en; `endif // rd_addr_m read address modified // wr_addr_m write address modified // wr_data_m write data modified reg [7:0] wr_data_m; reg [7:0] rd_addr_m, wr_addr_m; wire rd_en; reg bit_addr_r, rd_en_r; reg [7:0] wr_data_r; wire [7:0] rd_data_m; reg [2:0] bit_select; assign bit_data_out = rd_data[bit_select]; assign rd_data = rd_en_r ? wr_data_r: rd_data_m; assign rd_en = (rd_addr_m == wr_addr_m) & wr; oc8051_ram_256x8_two_bist oc8051_idata( .clk ( clk ), .rst ( rst ), .rd_addr ( rd_addr_m ), .rd_data ( rd_data_m ), .rd_en ( !rd_en ), .wr_addr ( wr_addr_m ), .wr_data ( wr_data_m ), .wr_en ( 1'b1 ), .wr ( wr ) `ifdef OC8051_BIST , .scanb_rst(scanb_rst), .scanb_clk(scanb_clk), .scanb_si(scanb_si), .scanb_so(scanb_so), .scanb_en(scanb_en) `endif ); always @(posedge clk or posedge rst) if (rst) begin bit_addr_r <= #1 1'b0; bit_select <= #1 3'b0; end else begin bit_addr_r <= #1 bit_addr; bit_select <= #1 rd_addr[2:0]; end always @(posedge clk or posedge rst) if (rst) begin rd_en_r <= #1 1'b0; wr_data_r <= #1 8'h0; end else begin rd_en_r <= #1 rd_en; wr_data_r <= #1 wr_data_m; end always @(rd_addr or bit_addr) casex ( {bit_addr, rd_addr[7]} ) // synopsys full_case parallel_case 2'b0?: rd_addr_m = rd_addr; 2'b10: rd_addr_m = {4'b0010, rd_addr[6:3]}; 2'b11: rd_addr_m = {1'b1, rd_addr[6:3], 3'b000}; endcase always @(wr_addr or bit_addr_r) casex ( {bit_addr_r, wr_addr[7]} ) // synopsys full_case parallel_case 2'b0?: wr_addr_m = wr_addr; 2'b10: wr_addr_m = {8'h00, 4'b0010, wr_addr[6:3]}; 2'b11: wr_addr_m = {8'h00, 1'b1, wr_addr[6:3], 3'b000}; endcase always @(rd_data or bit_select or bit_data_in or wr_data or bit_addr_r) casex ( {bit_addr_r, bit_select} ) // synopsys full_case parallel_case 4'b0_???: wr_data_m = wr_data; 4'b1_000: wr_data_m = {rd_data[7:1], bit_data_in}; 4'b1_001: wr_data_m = {rd_data[7:2], bit_data_in, rd_data[0]}; 4'b1_010: wr_data_m = {rd_data[7:3], bit_data_in, rd_data[1:0]}; 4'b1_011: wr_data_m = {rd_data[7:4], bit_data_in, rd_data[2:0]}; 4'b1_100: wr_data_m = {rd_data[7:5], bit_data_in, rd_data[3:0]}; 4'b1_101: wr_data_m = {rd_data[7:6], bit_data_in, rd_data[4:0]}; 4'b1_110: wr_data_m = {rd_data[7], bit_data_in, rd_data[5:0]}; 4'b1_111: wr_data_m = {bit_data_in, rd_data[6:0]}; endcase endmodule
Go to most recent revision | Compare with Previous | Blame | View Log