URL
https://opencores.org/ocsvn/turbo8051/turbo8051/trunk
Subversion Repositories turbo8051
[/] [turbo8051/] [trunk/] [rtl/] [spi/] [spi_core.v] - Rev 23
Go to most recent revision | Compare with Previous | Blame | View Log
////////////////////////////////////////////////////////////////////// //// //// //// Tubo 8051 cores SPI Interface Module //// //// //// //// This file is part of the Turbo 8051 cores project //// //// http://www.opencores.org/cores/turbo8051/ //// //// //// //// Description //// //// Turbo 8051 definitions. //// //// //// //// To Do: //// //// nothing //// //// //// //// Author(s): //// //// - Dinesh Annayya, dinesha@opencores.org //// //// //// ////////////////////////////////////////////////////////////////////// //// //// //// Copyright (C) 2000 Authors and OPENCORES.ORG //// //// //// //// This source file may be used and distributed without //// //// restriction provided that this copyright statement is not //// //// removed from the file and that any derivative work contains //// //// the original copyright notice and the associated disclaimer. //// //// //// //// This source file is free software; you can redistribute it //// //// and/or modify it under the terms of the GNU Lesser General //// //// Public License as published by the Free Software Foundation; //// //// either version 2.1 of the License, or (at your option) any //// //// later version. //// //// //// //// This source is distributed in the hope that it will be //// //// useful, but WITHOUT ANY WARRANTY; without even the implied //// //// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR //// //// PURPOSE. See the GNU Lesser General Public License for more //// //// details. //// //// //// //// You should have received a copy of the GNU Lesser General //// //// Public License along with this source; if not, download it //// //// from http://www.opencores.org/lgpl.shtml //// //// //// ////////////////////////////////////////////////////////////////////// module spi_core ( clk, reset_n, // Reg Bus Interface Signal reg_cs, reg_wr, reg_addr, reg_wdata, reg_be, // Outputs reg_rdata, reg_ack, // line interface sck , so , si , cs_n ); input clk ; input reset_n ; //--------------------------------- // Reg Bus Interface Signal //--------------------------------- input reg_cs ; input reg_wr ; input [3:0] reg_addr ; input [31:0] reg_wdata ; input [3:0] reg_be ; // Outputs output [31:0] reg_rdata ; output reg_ack ; //------------------------------------------- // Line Interface //------------------------------------------- output sck ; // clock out output so ; // serial data out input si ; // serial data in output [3:0] cs_n ; // cs_n //------------------------------------ // Wires //------------------------------------ wire [7:0] byte_in ; wire [7:0] byte_out ; wire [1:0] cfg_tgt_sel ; wire cfg_op_req ; // SPI operation request wire [1:0] cfg_op_type ; // SPI operation type wire [1:0] cfg_transfer_size ; // SPI transfer size wire [5:0] cfg_sck_period ; // sck clock period wire [4:0] cfg_sck_cs_period ; // cs setup/hold period wire [7:0] cfg_cs_byte ; // cs bit information wire [31:0] cfg_datain ; // data for transfer wire [31:0] cfg_dataout ; // data for received wire hware_op_done ; // operation done spi_if u_spi_if ( . clk (clk ), . reset_n (reset_n ), // towards ctrl i/f . sck_pe (sck_pe ), . sck_int (sck_int ), . cs_int_n (cs_int_n ), . byte_in (byte_in ), . load_byte (load_byte ), . byte_out (byte_out ), . shift_out (shift_out ), . shift_in (shift_in ), . cfg_tgt_sel (cfg_tgt_sel ), . sck (sck ), . so (so ), . si (si ), . cs_n (cs_n ) ); spi_ctl u_spi_ctrl ( . clk (clk ), . reset_n (reset_n ), . cfg_op_req (cfg_op_req ), . cfg_op_type (cfg_op_type ), . cfg_transfer_size (cfg_transfer_size ), . cfg_sck_period (cfg_sck_period ), . cfg_sck_cs_period (cfg_sck_cs_period ), . cfg_cs_byte (cfg_cs_byte ), . cfg_datain (cfg_datain ), . cfg_dataout (cfg_dataout ), . op_done (hware_op_done ), . sck_int (sck_int ), . cs_int_n (cs_int_n ), . sck_pe (sck_pe ), . sck_ne (sck_ne ), . shift_out (shift_out ), . shift_in (shift_in ), . load_byte (load_byte ), . byte_out (byte_out ), . byte_in (byte_in ) ); spi_cfg u_cfg ( . mclk (clk ), . reset_n (reset_n ), // Reg Bus Interface Signal . reg_cs (reg_cs ), . reg_wr (reg_wr ), . reg_addr (reg_addr ), . reg_wdata (reg_wdata ), . reg_be (reg_be ), // Outputs . reg_rdata (reg_rdata ), . reg_ack (reg_ack ), // configuration signal . cfg_tgt_sel (cfg_tgt_sel ), . cfg_op_req (cfg_op_req ), // SPI operation request . cfg_op_type (cfg_op_type ), // SPI operation type . cfg_transfer_size (cfg_transfer_size ), // SPI transfer size . cfg_sck_period (cfg_sck_period ), // sck clock period . cfg_sck_cs_period (cfg_sck_cs_period ), // cs setup/hold period . cfg_cs_byte (cfg_cs_byte ), // cs bit information . cfg_datain (cfg_datain ), // data for transfer . cfg_dataout (cfg_dataout ), // data for received . hware_op_done (hware_op_done ) // operation done ); endmodule
Go to most recent revision | Compare with Previous | Blame | View Log