URL
https://opencores.org/ocsvn/turbo8051/turbo8051/trunk
Subversion Repositories turbo8051
[/] [turbo8051/] [trunk/] [verif/] [log/] [uart_test_1.log] - Rev 65
Go to most recent revision | Compare with Previous | Blame | View Log
Reading D:/Actel/Libero_v9.1/Model/tcl/vsim/pref.tcl# 6.6d# vsim +uart_test_1 -do run.do -c tb_top# // ModelSim ACTEL 6.6d Nov 2 2010# //# // Copyright 1991-2010 Mentor Graphics Corporation# // All Rights Reserved.# //# // THIS WORK CONTAINS TRADE SECRET AND# // PROPRIETARY INFORMATION WHICH IS THE PROPERTY# // OF MENTOR GRAPHICS CORPORATION OR ITS LICENSORS# // AND IS SUBJECT TO LICENSE TERMS.# //# Loading sv_std.std# Loading work.tb_top# Loading work.turbo8051# Loading work.clkgen# Loading work.clk_ctl# Loading work.wb_crossbar# Loading work.g_mac_top# Loading work.g_dpath_ctrl# Loading work.g_eth_parser# Loading work.g_mac_core# Loading work.g_rx_top# Loading work.g_rx_fsm# Loading work.half_dup_dble_reg# Loading work.g_rx_crc32# Loading work.g_deferral_rx# Loading work.g_md_intf# Loading work.g_tx_top# Loading work.g_deferral# Loading work.g_tx_fsm# Loading work.g_tx_crc32# Loading work.toggle_sync# Loading work.g_cfg_mgmt# Loading work.s2f_sync# Loading work.generic_register# Loading work.req_register# Loading work.stat_counter# Loading work.generic_intr_stat_reg# Loading work.g_mii_intf# Loading work.async_fifo# Loading work.wb_rd_mem2mem# Loading work.wb_wr_mem2mem# Loading work.uart_core# Loading work.uart_cfg# Loading work.stat_register# Loading work.uart_txfsm# Loading work.uart_rxfsm# Loading work.double_sync_low# Loading work.spi_core# Loading work.spi_if# Loading work.spi_ctl# Loading work.spi_cfg# Loading work.oc8051_top# Loading work.oc8051_decoder# Loading work.oc8051_alu# Loading work.oc8051_multiply# Loading work.oc8051_divide# Loading work.oc8051_ram_top# Loading work.oc8051_ram_256x8_two_bist# Loading work.oc8051_alu_src_sel# Loading work.oc8051_comp# Loading work.oc8051_rom# Loading work.oc8051_cy_select# Loading work.oc8051_indi_addr# Loading work.oc8051_memory_interface# Loading work.oc8051_sfr# Loading work.oc8051_acc# Loading work.oc8051_b_register# Loading work.oc8051_sp# Loading work.oc8051_dptr# Loading work.oc8051_psw# Loading work.oc8051_ports# Loading work.oc8051_int# Loading work.oc8051_tc# Loading work.oc8051_tc2# Loading work.oc8051_xrom# Loading work.oc8051_xram# Loading work.tb_eth_top# Loading work.tb_mii# Loading work.tb_rmii# Loading work.uart_agent# Loading work.m25p20# Loading work.memory_access# Loading work.acdc_check# Loading work.internal_logic# Loading work.AT45DB321# Loading work.tb_glbl# Loading work.bit_register# ** Warning: (vsim-WLF-5000) WLF file currently in use: vsim.wlf# File in use by: Hostname: ProcessID: 14# Attempting to use alternate WLF file "./wlft22nc1m".# ** Warning: (vsim-WLF-5001) Could not open WLF file: vsim.wlf# Using alternate file: ./wlft22nc1m# ** Warning: (vsim-3017) ../../rtl/uart/uart_core.v(211): [TFMPC] - Too few port connections. Expected 14, found 12.# Region: /tb_top/u_core/u_uart_core/u_rxfifo# ** Warning: (vsim-3722) ../../rtl/uart/uart_core.v(211): [TFMPC] - Missing connection for port 'afull'.# ** Warning: (vsim-3722) ../../rtl/uart/uart_core.v(211): [TFMPC] - Missing connection for port 'aempty'.# ** Warning: (vsim-3017) ../../rtl/uart/uart_core.v(227): [TFMPC] - Too few port connections. Expected 14, found 12.# Region: /tb_top/u_core/u_uart_core/u_txfifo# ** Warning: (vsim-3722) ../../rtl/uart/uart_core.v(227): [TFMPC] - Missing connection for port 'afull'.# ** Warning: (vsim-3722) ../../rtl/uart/uart_core.v(227): [TFMPC] - Missing connection for port 'aempty'.# do run.do# i : 00# i : 00# i : 00# i : 00# i : 00# i : 00# i : 00# i : 00# i : 00# i : 00# NOTE : Load memory with Initial delivery content# NOTE : Initial Load End# NOTE: COMMUNICATION (RE)STARTED# Config-Write: Id: 3 Addr = 0000, Cfg. Data = 00000017## ... Writing char 36 ...# ... Write data 24 to UART done cnt : 1 ...### ... Writing char 129 ...# (tb_top.tb_uart.read_char_chk.loop_2) Data match 24# ... Read Data from UART done cnt : 1...# ... Write data 81 to UART done cnt : 2 ...### ... Writing char 9 ...# (tb_top.tb_uart.read_char_chk.loop_2) Data match 81# ... Read Data from UART done cnt : 2...# ... Write data 09 to UART done cnt : 3 ...### ... Writing char 99 ...# (tb_top.tb_uart.read_char_chk.loop_2) Data match 09# ... Read Data from UART done cnt : 3...# ... Write data 63 to UART done cnt : 4 ...### ... Writing char 13 ...# (tb_top.tb_uart.read_char_chk.loop_2) Data match 63# ... Read Data from UART done cnt : 4...# ... Write data 0d to UART done cnt : 5 ...### ... Writing char 141 ...# (tb_top.tb_uart.read_char_chk.loop_2) Data match 0d# ... Read Data from UART done cnt : 5...# ... Write data 8d to UART done cnt : 6 ...### ... Writing char 101 ...# (tb_top.tb_uart.read_char_chk.loop_2) Data match 8d# ... Read Data from UART done cnt : 6...# ... Write data 65 to UART done cnt : 7 ...### ... Writing char 18 ...# (tb_top.tb_uart.read_char_chk.loop_2) Data match 65# ... Read Data from UART done cnt : 7...# ... Write data 12 to UART done cnt : 8 ...### ... Writing char 1 ...# (tb_top.tb_uart.read_char_chk.loop_2) Data match 12# ... Read Data from UART done cnt : 8...# ... Write data 01 to UART done cnt : 9 ...### ... Writing char 13 ...# (tb_top.tb_uart.read_char_chk.loop_2) Data match 01# ... Read Data from UART done cnt : 9...# ... Write data 0d to UART done cnt : 10 ...### ... Writing char 118 ...# (tb_top.tb_uart.read_char_chk.loop_2) Data match 0d# ... Read Data from UART done cnt : 10...# ... Write data 76 to UART done cnt : 11 ...### ... Writing char 61 ...# (tb_top.tb_uart.read_char_chk.loop_2) Data match 76# ... Read Data from UART done cnt : 11...# ... Write data 3d to UART done cnt : 12 ...### ... Writing char 237 ...# (tb_top.tb_uart.read_char_chk.loop_2) Data match 3d# ... Read Data from UART done cnt : 12...# ... Write data ed to UART done cnt : 13 ...### ... Writing char 140 ...# (tb_top.tb_uart.read_char_chk.loop_2) Data match ed# ... Read Data from UART done cnt : 13...# ... Write data 8c to UART done cnt : 14 ...### ... Writing char 249 ...# (tb_top.tb_uart.read_char_chk.loop_2) Data match 8c# ... Read Data from UART done cnt : 14...# ... Write data f9 to UART done cnt : 15 ...### ... Writing char 198 ...# (tb_top.tb_uart.read_char_chk.loop_2) Data match f9# ... Read Data from UART done cnt : 15...# ... Write data c6 to UART done cnt : 16 ...### ... Writing char 197 ...# (tb_top.tb_uart.read_char_chk.loop_2) Data match c6# ... Read Data from UART done cnt : 16...# ... Write data c5 to UART done cnt : 17 ...### ... Writing char 170 ...# (tb_top.tb_uart.read_char_chk.loop_2) Data match c5# ... Read Data from UART done cnt : 17...# ... Write data aa to UART done cnt : 18 ...### ... Writing char 229 ...# (tb_top.tb_uart.read_char_chk.loop_2) Data match aa# ... Read Data from UART done cnt : 18...# ... Write data e5 to UART done cnt : 19 ...### ... Writing char 119 ...# (tb_top.tb_uart.read_char_chk.loop_2) Data match e5# ... Read Data from UART done cnt : 19...# ... Write data 77 to UART done cnt : 20 ...### ... Writing char 18 ...# (tb_top.tb_uart.read_char_chk.loop_2) Data match 77# ... Read Data from UART done cnt : 20...# ... Write data 12 to UART done cnt : 21 ...### ... Writing char 143 ...# (tb_top.tb_uart.read_char_chk.loop_2) Data match 12# ... Read Data from UART done cnt : 21...# ... Write data 8f to UART done cnt : 22 ...### ... Writing char 242 ...# (tb_top.tb_uart.read_char_chk.loop_2) Data match 8f# ... Read Data from UART done cnt : 22...# ... Write data f2 to UART done cnt : 23 ...### ... Writing char 206 ...# (tb_top.tb_uart.read_char_chk.loop_2) Data match f2# ... Read Data from UART done cnt : 23...# ... Write data ce to UART done cnt : 24 ...### ... Writing char 232 ...# (tb_top.tb_uart.read_char_chk.loop_2) Data match ce# ... Read Data from UART done cnt : 24...# ... Write data e8 to UART done cnt : 25 ...### ... Writing char 197 ...# (tb_top.tb_uart.read_char_chk.loop_2) Data match e8# ... Read Data from UART done cnt : 25...# ... Write data c5 to UART done cnt : 26 ...### ... Writing char 92 ...# (tb_top.tb_uart.read_char_chk.loop_2) Data match c5# ... Read Data from UART done cnt : 26...# ... Write data 5c to UART done cnt : 27 ...### ... Writing char 189 ...# (tb_top.tb_uart.read_char_chk.loop_2) Data match 5c# ... Read Data from UART done cnt : 27...# ... Write data bd to UART done cnt : 28 ...### ... Writing char 45 ...# (tb_top.tb_uart.read_char_chk.loop_2) Data match bd# ... Read Data from UART done cnt : 28...# ... Write data 2d to UART done cnt : 29 ...### ... Writing char 101 ...# (tb_top.tb_uart.read_char_chk.loop_2) Data match 2d# ... Read Data from UART done cnt : 29...# ... Write data 65 to UART done cnt : 30 ...### ... Writing char 99 ...# (tb_top.tb_uart.read_char_chk.loop_2) Data match 65# ... Read Data from UART done cnt : 30...# ... Write data 63 to UART done cnt : 31 ...### ... Writing char 10 ...# (tb_top.tb_uart.read_char_chk.loop_2) Data match 63# ... Read Data from UART done cnt : 31...# ... Write data 0a to UART done cnt : 32 ...### ... Writing char 128 ...# (tb_top.tb_uart.read_char_chk.loop_2) Data match 0a# ... Read Data from UART done cnt : 32...# ... Write data 80 to UART done cnt : 33 ...### ... Writing char 32 ...# (tb_top.tb_uart.read_char_chk.loop_2) Data match 80# ... Read Data from UART done cnt : 33...# ... Write data 20 to UART done cnt : 34 ...### ... Writing char 170 ...# (tb_top.tb_uart.read_char_chk.loop_2) Data match 20# ... Read Data from UART done cnt : 34...# ... Write data aa to UART done cnt : 35 ...### ... Writing char 157 ...# (tb_top.tb_uart.read_char_chk.loop_2) Data match aa# ... Read Data from UART done cnt : 35...# ... Write data 9d to UART done cnt : 36 ...### ... Writing char 150 ...# (tb_top.tb_uart.read_char_chk.loop_2) Data match 9d# ... Read Data from UART done cnt : 36...# ... Write data 96 to UART done cnt : 37 ...### ... Writing char 19 ...# (tb_top.tb_uart.read_char_chk.loop_2) Data match 96# ... Read Data from UART done cnt : 37...# ... Write data 13 to UART done cnt : 38 ...### ... Writing char 13 ...# (tb_top.tb_uart.read_char_chk.loop_2) Data match 13# ... Read Data from UART done cnt : 38...# ... Write data 0d to UART done cnt : 39 ...### ... Writing char 83 ...# (tb_top.tb_uart.read_char_chk.loop_2) Data match 0d# ... Read Data from UART done cnt : 39...# ... Write data 53 to UART done cnt : 40 ...## (tb_top.tb_uart.read_char_chk.loop_2) Data match 53# ... Read Data from UART done cnt : 40...# -------------------- Reporting Configuration --------------------# Data bit number setting is : 8# Stop bit number setting is : 1# Divisor of Uart clock is : 3# Parity is enable# Even parity setting# FIFO mode is disable# -----------------------------------------------------------------# -------------------- Reporting Status --------------------## Number of character received is : 40# Number of character sent is : 40# Number of parity error rxd is : 0# Number of stop1 error rxd is : 0# Number of stop2 error rxd is : 0# Number of timeout error is : 0# Number of error is : 0# -----------------------------------------------------------------## -------------------------------------------------# Test Status# warnings: 0, errors: 0## -------------------------------------------------# Test Status# warnings: 0, errors: 0## =========# Test Status: TEST PASSED# =========## ** Note: $finish : ../../verif/lib/tb_glbl.v(64)# Time: 157871 ns Iteration: 0 Instance: /tb_top
Go to most recent revision | Compare with Previous | Blame | View Log