URL
https://opencores.org/ocsvn/turbo8051/turbo8051/trunk
Subversion Repositories turbo8051
[/] [turbo8051/] [trunk/] [verif/] [log/] [uart_test_1.log] - Rev 74
Go to most recent revision | Compare with Previous | Blame | View Log
Reading /mtitcl/vsim/pref.tcl# 10.2b# vsim +uart_test_1 -do run.do -c tb_top# // Questa Sim-64# // Version 10.2b linux_x86_64 May 16 2013# //# // Copyright 1991-2013 Mentor Graphics Corporation# // All Rights Reserved.# //# // THIS WORK CONTAINS TRADE SECRET AND PROPRIETARY INFORMATION# // WHICH IS THE PROPERTY OF MENTOR GRAPHICS CORPORATION OR ITS# // LICENSORS AND IS SUBJECT TO LICENSE TERMS.# //# Loading sv_std.std# Loading work.tb_top(fast)# Loading work.oc8051_top(fast)# Loading work.tb_eth_top(fast)# Loading work.AT45DB321(fast)# do run.do# i : 00# i : 00# i : 00# i : 00# i : 00# i : 00# i : 00# i : 00# i : 00# i : 00# NOTE : Load memory with Initial delivery content# NOTE : Initial Load End# NOTE: COMMUNICATION (RE)STARTED# Config-Write: Id: 3 Addr = 0000, Cfg. Data = 00000017## ... Writing char 36 ...# ... Write data 24 to UART done cnt : 1 ...### ... Writing char 129 ...# (tb_top.tb_uart.read_char_chk.loop_2) Data match 24# ... Read Data from UART done cnt : 1...# ... Write data 81 to UART done cnt : 2 ...### ... Writing char 9 ...# (tb_top.tb_uart.read_char_chk.loop_2) Data match 81# ... Read Data from UART done cnt : 2...# ... Write data 09 to UART done cnt : 3 ...### ... Writing char 99 ...# (tb_top.tb_uart.read_char_chk.loop_2) Data match 09# ... Read Data from UART done cnt : 3...# ... Write data 63 to UART done cnt : 4 ...### ... Writing char 13 ...# (tb_top.tb_uart.read_char_chk.loop_2) Data match 63# ... Read Data from UART done cnt : 4...# ... Write data 0d to UART done cnt : 5 ...### ... Writing char 141 ...# (tb_top.tb_uart.read_char_chk.loop_2) Data match 0d# ... Read Data from UART done cnt : 5...# ... Write data 8d to UART done cnt : 6 ...### ... Writing char 101 ...# (tb_top.tb_uart.read_char_chk.loop_2) Data match 8d# ... Read Data from UART done cnt : 6...# ... Write data 65 to UART done cnt : 7 ...### ... Writing char 18 ...# (tb_top.tb_uart.read_char_chk.loop_2) Data match 65# ... Read Data from UART done cnt : 7...# ... Write data 12 to UART done cnt : 8 ...### ... Writing char 1 ...# (tb_top.tb_uart.read_char_chk.loop_2) Data match 12# ... Read Data from UART done cnt : 8...# ... Write data 01 to UART done cnt : 9 ...### ... Writing char 13 ...# (tb_top.tb_uart.read_char_chk.loop_2) Data match 01# ... Read Data from UART done cnt : 9...# ... Write data 0d to UART done cnt : 10 ...### ... Writing char 118 ...# (tb_top.tb_uart.read_char_chk.loop_2) Data match 0d# ... Read Data from UART done cnt : 10...# ... Write data 76 to UART done cnt : 11 ...### ... Writing char 61 ...# (tb_top.tb_uart.read_char_chk.loop_2) Data match 76# ... Read Data from UART done cnt : 11...# ... Write data 3d to UART done cnt : 12 ...### ... Writing char 237 ...# (tb_top.tb_uart.read_char_chk.loop_2) Data match 3d# ... Read Data from UART done cnt : 12...# ... Write data ed to UART done cnt : 13 ...### ... Writing char 140 ...# (tb_top.tb_uart.read_char_chk.loop_2) Data match ed# ... Read Data from UART done cnt : 13...# ... Write data 8c to UART done cnt : 14 ...### ... Writing char 249 ...# (tb_top.tb_uart.read_char_chk.loop_2) Data match 8c# ... Read Data from UART done cnt : 14...# ... Write data f9 to UART done cnt : 15 ...### ... Writing char 198 ...# (tb_top.tb_uart.read_char_chk.loop_2) Data match f9# ... Read Data from UART done cnt : 15...# ... Write data c6 to UART done cnt : 16 ...### ... Writing char 197 ...# (tb_top.tb_uart.read_char_chk.loop_2) Data match c6# ... Read Data from UART done cnt : 16...# ... Write data c5 to UART done cnt : 17 ...### ... Writing char 170 ...# (tb_top.tb_uart.read_char_chk.loop_2) Data match c5# ... Read Data from UART done cnt : 17...# ... Write data aa to UART done cnt : 18 ...### ... Writing char 229 ...# (tb_top.tb_uart.read_char_chk.loop_2) Data match aa# ... Read Data from UART done cnt : 18...# ... Write data e5 to UART done cnt : 19 ...### ... Writing char 119 ...# (tb_top.tb_uart.read_char_chk.loop_2) Data match e5# ... Read Data from UART done cnt : 19...# ... Write data 77 to UART done cnt : 20 ...### ... Writing char 18 ...# (tb_top.tb_uart.read_char_chk.loop_2) Data match 77# ... Read Data from UART done cnt : 20...# ... Write data 12 to UART done cnt : 21 ...### ... Writing char 143 ...# (tb_top.tb_uart.read_char_chk.loop_2) Data match 12# ... Read Data from UART done cnt : 21...# ... Write data 8f to UART done cnt : 22 ...### ... Writing char 242 ...# (tb_top.tb_uart.read_char_chk.loop_2) Data match 8f# ... Read Data from UART done cnt : 22...# ... Write data f2 to UART done cnt : 23 ...### ... Writing char 206 ...# (tb_top.tb_uart.read_char_chk.loop_2) Data match f2# ... Read Data from UART done cnt : 23...# ... Write data ce to UART done cnt : 24 ...### ... Writing char 232 ...# (tb_top.tb_uart.read_char_chk.loop_2) Data match ce# ... Read Data from UART done cnt : 24...# ... Write data e8 to UART done cnt : 25 ...### ... Writing char 197 ...# (tb_top.tb_uart.read_char_chk.loop_2) Data match e8# ... Read Data from UART done cnt : 25...# ... Write data c5 to UART done cnt : 26 ...### ... Writing char 92 ...# (tb_top.tb_uart.read_char_chk.loop_2) Data match c5# ... Read Data from UART done cnt : 26...# ... Write data 5c to UART done cnt : 27 ...### ... Writing char 189 ...# (tb_top.tb_uart.read_char_chk.loop_2) Data match 5c# ... Read Data from UART done cnt : 27...# ... Write data bd to UART done cnt : 28 ...### ... Writing char 45 ...# (tb_top.tb_uart.read_char_chk.loop_2) Data match bd# ... Read Data from UART done cnt : 28...# ... Write data 2d to UART done cnt : 29 ...### ... Writing char 101 ...# (tb_top.tb_uart.read_char_chk.loop_2) Data match 2d# ... Read Data from UART done cnt : 29...# ... Write data 65 to UART done cnt : 30 ...### ... Writing char 99 ...# (tb_top.tb_uart.read_char_chk.loop_2) Data match 65# ... Read Data from UART done cnt : 30...# ... Write data 63 to UART done cnt : 31 ...### ... Writing char 10 ...# (tb_top.tb_uart.read_char_chk.loop_2) Data match 63# ... Read Data from UART done cnt : 31...# ... Write data 0a to UART done cnt : 32 ...### ... Writing char 128 ...# (tb_top.tb_uart.read_char_chk.loop_2) Data match 0a# ... Read Data from UART done cnt : 32...# ... Write data 80 to UART done cnt : 33 ...### ... Writing char 32 ...# (tb_top.tb_uart.read_char_chk.loop_2) Data match 80# ... Read Data from UART done cnt : 33...# ... Write data 20 to UART done cnt : 34 ...### ... Writing char 170 ...# (tb_top.tb_uart.read_char_chk.loop_2) Data match 20# ... Read Data from UART done cnt : 34...# ... Write data aa to UART done cnt : 35 ...### ... Writing char 157 ...# (tb_top.tb_uart.read_char_chk.loop_2) Data match aa# ... Read Data from UART done cnt : 35...# ... Write data 9d to UART done cnt : 36 ...### ... Writing char 150 ...# (tb_top.tb_uart.read_char_chk.loop_2) Data match 9d# ... Read Data from UART done cnt : 36...# ... Write data 96 to UART done cnt : 37 ...### ... Writing char 19 ...# (tb_top.tb_uart.read_char_chk.loop_2) Data match 96# ... Read Data from UART done cnt : 37...# ... Write data 13 to UART done cnt : 38 ...### ... Writing char 13 ...# (tb_top.tb_uart.read_char_chk.loop_2) Data match 13# ... Read Data from UART done cnt : 38...# ... Write data 0d to UART done cnt : 39 ...### ... Writing char 83 ...# (tb_top.tb_uart.read_char_chk.loop_2) Data match 0d# ... Read Data from UART done cnt : 39...# ... Write data 53 to UART done cnt : 40 ...## (tb_top.tb_uart.read_char_chk.loop_2) Data match 53# ... Read Data from UART done cnt : 40...# -------------------- Reporting Configuration --------------------# Data bit number setting is : 8# Stop bit number setting is : 1# Divisor of Uart clock is : 3# Parity is enable# Even parity setting# FIFO mode is disable# -----------------------------------------------------------------# -------------------- Reporting Status --------------------## Number of character received is : 40# Number of character sent is : 40# Number of parity error rxd is : 0# Number of stop1 error rxd is : 0# Number of stop2 error rxd is : 0# Number of timeout error is : 0# Number of error is : 0# -----------------------------------------------------------------## -------------------------------------------------# Test Status# warnings: 0, errors: 0## -------------------------------------------------# Test Status# warnings: 0, errors: 0## =========# Test Status: TEST PASSED# =========## ** Note: $finish : ../lib/tb_glbl.v(70)# Time: 157871 ns Iteration: 0 Instance: /tb_top
Go to most recent revision | Compare with Previous | Blame | View Log