Subversion Repositories uart2bus_testbench

// 
// -------------------------------------------------------------
//    Copyright 2004-2008 Synopsys, Inc.
//    Copyright 2010 Mentor Graphics Corporation
//    All Rights Reserved Worldwide
// 
//    Licensed under the Apache License, Version 2.0 (the
//    "License"); you may not use this file except in
//    compliance with the License.  You may obtain a copy of
//    the License at
// 
//        http://www.apache.org/licenses/LICENSE-2.0
// 
//    Unless required by applicable law or agreed to in
//    writing, software distributed under the License is
//    distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR
//    CONDITIONS OF ANY KIND, either express or implied.  See
//    the License for the specific language governing
//    permissions and limitations under the License.
// -------------------------------------------------------------
// 


//------------------------------------------------------------------------------
// Title: Memory Walking-Ones Test Sequences
//
// This section defines sequences for applying a "walking-ones"
// algorithm on one or more memories.
//------------------------------------------------------------------------------


//------------------------------------------------------------------------------
// Class: uvm_mem_single_walk_seq
//
// Runs the walking-ones algorithm on the memory given by the <mem> property,
// which must be assigned prior to starting this sequence.
//
// If bit-type resource named
// "NO_REG_TESTS", "NO_MEM_TESTS", or "NO_MEM_WALK_TEST"
// in the "REG::" namespace
// matches the full name of the memory,
// the memory is not tested.
//
//| uvm_resource_db#(bit)::set({"REG::",regmodel.blk.mem0.get_full_name()},
//|                            "NO_MEM_TESTS", 1, this);
//
// The walking ones algorithm is performed for each map in which the memory
// is defined.
//
//| for (k = 0 thru memsize-1)
//|   write addr=k data=~k
//|   if (k > 0) {
//|     read addr=k-1, expect data=~(k-1)
//|     write addr=k-1 data=k-1
//|   if (k == last addr)
//|     read addr=k, expect data=~k
//
//------------------------------------------------------------------------------

class uvm_mem_single_walk_seq extends uvm_reg_sequence #(uvm_sequence #(uvm_reg_item));

   `uvm_object_utils(uvm_mem_single_walk_seq)


   // Variable: mem
   //
   // The memory to test; must be assigned prior to starting sequence.

   uvm_mem mem;


   // Function: new
   //
   // Creates a new instance of the class with the given name.

   function new(string name="uvm_mem_walk_seq");
     super.new(name);
   endfunction


   // Task: body
   //
   // Performs the walking-ones algorithm on each map of the memory
   // specified in <mem>.

   virtual task body();
      uvm_reg_map maps[$];
      int n_bits;

      if (mem == null) begin
         `uvm_error("uvm_mem_walk_seq", "No memory specified to run sequence on");
         return;
      end

      // Memories with some attributes are not to be tested
      if (uvm_resource_db#(bit)::get_by_name({"REG::",mem.get_full_name()},
                                             "NO_REG_TESTS", 0) != null ||
          uvm_resource_db#(bit)::get_by_name({"REG::",mem.get_full_name()},
                                             "NO_MEM_TESTS", 0) != null ||
          uvm_resource_db#(bit)::get_by_name({"REG::",mem.get_full_name()},
                                             "NO_MEM_WALK_TEST", 0) != null )
         return;

      n_bits = mem.get_n_bits();

      // Memories may be accessible from multiple physical interfaces (maps)
      mem.get_maps(maps);
      
      // Walk the memory via each map
      foreach (maps[j]) begin
         uvm_status_e status;
         uvm_reg_data_t  val, exp, v;
         
         // Only deal with RW memories
         if (mem.get_access(maps[j]) != "RW") continue;

         `uvm_info("uvm_mem_walk_seq", $sformatf("Walking memory %s in map \"%s\"...",
                                    mem.get_full_name(), maps[j].get_full_name()), UVM_LOW);
         
         // The walking process is, for address k:
         // - Write ~k
         // - Read k-1 and expect ~(k-1) if k > 0
         // - Write k-1 at k-1
         // - Read k and expect ~k if k == last address
         for (int k = 0; k < mem.get_size(); k++) begin

            mem.write(status, k, ~k, UVM_FRONTDOOR, maps[j], this);

            if (status != UVM_IS_OK) begin
               `uvm_error("uvm_mem_walk_seq", $sformatf("Status was %s when writing \"%s[%0d]\" through map \"%s\".",
                                           status.name(), mem.get_full_name(), k, maps[j].get_full_name()));
            end
            
            if (k > 0) begin
               mem.read(status, k-1, val, UVM_FRONTDOOR, maps[j], this);
               if (status != UVM_IS_OK) begin
                  `uvm_error("uvm_mem_walk_seq", $sformatf("Status was %s when reading \"%s[%0d]\" through map \"%s\".",
                                              status.name(), mem.get_full_name(), k, maps[j].get_full_name()));
               end
               else begin
                  exp = ~(k-1) & ((1'b1<<n_bits)-1);
                  if (val !== exp) begin
                     `uvm_error("uvm_mem_walk_seq", $sformatf("\"%s[%0d-1]\" read back as 'h%h instead of 'h%h.",
                                                 mem.get_full_name(), k, val, exp));
                     
                  end
               end
               
               mem.write(status, k-1, k-1, UVM_FRONTDOOR, maps[j], this);
               if (status != UVM_IS_OK) begin
                  `uvm_error("uvm_mem_walk_seq", $sformatf("Status was %s when writing \"%s[%0d-1]\" through map \"%s\".",
                                              status.name(), mem.get_full_name(), k, maps[j].get_full_name()));
               end
            end
            
            if (k == mem.get_size() - 1) begin
               mem.read(status, k, val, UVM_FRONTDOOR, maps[j], this);
               if (status != UVM_IS_OK) begin
                  `uvm_error("uvm_mem_walk_seq", $sformatf("Status was %s when reading \"%s[%0d]\" through map \"%s\".",
                                              status.name(), mem.get_full_name(), k, maps[j].get_full_name()));
               end
               else begin
                  exp = ~(k) & ((1'b1<<n_bits)-1);
                  if (val !== exp) begin
                     `uvm_error("uvm_mem_walk_seq", $sformatf("\"%s[%0d]\" read back as 'h%h instead of 'h%h.",
                                                 mem.get_full_name(), k, val, exp));
                     
                  end
               end
            end
         end
      end
   endtask: body

endclass: uvm_mem_single_walk_seq



//------------------------------------------------------------------------------
// Class: uvm_mem_walk_seq
//
// Verifies the all memories in a block
// by executing the <uvm_mem_single_walk_seq> sequence on
// every memory within it.
//
// If bit-type resource named
// "NO_REG_TESTS", "NO_MEM_TESTS", or "NO_MEM_WALK_TEST"
// in the "REG::" namespace
// matches the full name of the block,
// the block is not tested.
//
//| uvm_resource_db#(bit)::set({"REG::",regmodel.blk.get_full_name(),".*"},
//|                            "NO_MEM_TESTS", 1, this);
//
//------------------------------------------------------------------------------

class uvm_mem_walk_seq extends uvm_reg_sequence #(uvm_sequence #(uvm_reg_item));

   // Variable: model
   //
   // The block to be tested. Declared in the base class.
   //
   //| uvm_reg_block model; 


   // Variable: mem_seq
   //
   // The sequence used to test one memory
   //
   protected uvm_mem_single_walk_seq mem_seq;

   `uvm_object_utils(uvm_mem_walk_seq)

   function new(string name="uvm_mem_walk_seq");
     super.new(name);
   endfunction


   // Task: body
   //
   // Executes the mem walk sequence, one block at a time.
   // Do not call directly. Use seq.start() instead.
   //
   virtual task body();

      if (model == null) begin
         `uvm_error("uvm_mem_walk_seq", "No register model specified to run sequence on");
         return;
      end

      uvm_report_info("STARTING_SEQ",{"\n\nStarting ",get_name()," sequence...\n"},UVM_LOW);

      mem_seq = uvm_mem_single_walk_seq::type_id::create("single_mem_walk_seq");

      this.reset_blk(model);
      model.reset();

      do_block(model);
   endtask: body


   // Task: do_block
   //
   // Test all of the memories in a given ~block~
   //
   protected virtual task do_block(uvm_reg_block blk);
      uvm_mem mems[$];
      
      if (uvm_resource_db#(bit)::get_by_name({"REG::",blk.get_full_name()},
                                             "NO_REG_TESTS", 0) != null ||
          uvm_resource_db#(bit)::get_by_name({"REG::",blk.get_full_name()},
                                             "NO_MEM_TESTS", 0) != null ||
          uvm_resource_db#(bit)::get_by_name({"REG::",blk.get_full_name()},
                                             "NO_MEM_ACCESS_TEST", 0) != null )
         return;
      
      // Iterate over all memories, checking accesses
      blk.get_memories(mems, UVM_NO_HIER);
      foreach (mems[i]) begin
         // Memories with some attributes are not to be tested
         if (uvm_resource_db#(bit)::get_by_name({"REG::",mems[i].get_full_name()},
                                                "NO_REG_TESTS", 0) != null ||
             uvm_resource_db#(bit)::get_by_name({"REG::",mems[i].get_full_name()},
                                                "NO_MEM_TESTS", 0) != null ||
             uvm_resource_db#(bit)::get_by_name({"REG::",mems[i].get_full_name()},
                                                "NO_MEM_WALK_TEST", 0) != null )
           continue;
         
         mem_seq.mem = mems[i];
         mem_seq.start(null, this);
      end

      begin
         uvm_reg_block blks[$];
         
         blk.get_blocks(blks);
         foreach (blks[i]) begin
            do_block(blks[i]);
         end
      end
   endtask: do_block


   // Task: reset_blk
   //
   // Reset the DUT that corresponds to the specified block abstraction class.
   //
   // Currently empty.
   // Will rollback the environment's phase to the ~reset~
   // phase once the new phasing is available.
   //
   // In the meantime, the DUT should be reset before executing this
   // test sequence or this method should be implemented
   // in an extension to reset the DUT.
   //
   virtual task reset_blk(uvm_reg_block blk);
   endtask

endclass: uvm_mem_walk_seq