URL
https://opencores.org/ocsvn/uart_block/uart_block/trunk
Subversion Repositories uart_block
[/] [uart_block/] [trunk/] [hdl/] [iseProject/] [INTERCON_P2P.vhd] - Rev 35
Go to most recent revision | Compare with Previous | Blame | View Log
library IEEE; use IEEE.STD_LOGIC_1164.ALL; entity INTERCON_P2P is port ( -- External (non-WISHBONE) inputs EXTCLK: in std_logic; EXTRST: in std_logic; -- External signals for simulation purposes byte_out: out std_logic_vector(7 downto 0); data_avaible : out std_logic; tx: out std_logic; rx : in std_logic ); end INTERCON_P2P; architecture Behavioral of INTERCON_P2P is component SYC0001a port( -- WISHBONE Interface CLK_O: out std_logic; RST_O: out std_logic; -- NON-WISHBONE Signals EXTCLK: in std_logic; EXTRST: in std_logic ); end component SYC0001a; component SERIALMASTER is port( -- WISHBONE Signals ACK_I: in std_logic; ADR_O: out std_logic_vector( 1 downto 0 ); CLK_I: in std_logic; CYC_O: out std_logic; DAT_I: in std_logic_vector( 31 downto 0 ); DAT_O: out std_logic_vector( 31 downto 0 ); RST_I: in std_logic; SEL_O: out std_logic; STB_O: out std_logic; WE_O: out std_logic; -- NON-WISHBONE Signals byte_rec : out std_logic_vector(7 downto 0) ); end component; component uart_wishbone_slave is Port ( RST_I : in STD_LOGIC; CLK_I : in STD_LOGIC; ADR_I0 : in STD_LOGIC_VECTOR (1 downto 0); DAT_I0 : in STD_LOGIC_VECTOR (31 downto 0); DAT_O0 : out STD_LOGIC_VECTOR (31 downto 0); WE_I : in STD_LOGIC; STB_I : in STD_LOGIC; ACK_O : out STD_LOGIC; serial_in : in std_logic; data_Avaible : out std_logic; serial_out : out std_logic ); end component; signal CLK : std_logic; signal RST : std_logic; signal ACK : std_logic; signal WE : std_logic; signal STB : std_logic; signal ADR : std_logic_vector( 1 downto 0 ); signal dataI : std_logic_vector (31 downto 0); signal dataO : std_logic_vector (31 downto 0); begin uSysCon: component SYC0001a port map( CLK_O => CLK, RST_O => RST, EXTCLK => EXTCLK, EXTRST => EXTRST ); uMasterSerial : component SERIALMASTER port map( ACK_I => ACK, ADR_O => ADR, CLK_I => CLK, CYC_O => open, DAT_I => dataI, DAT_O => dataO, RST_I => RST, SEL_O => open, STB_O => STB, byte_rec => byte_out, WE_O => WE ); uUartWishboneSlave: component uart_wishbone_slave port map( RST_I => RST, CLK_I => CLK, ADR_I0 => ADR, DAT_I0 => dataO, DAT_O0 => dataI, WE_I => WE, STB_I => STB, ACK_O => ACK, serial_in => rx, data_Avaible => open, serial_out => tx ); end Behavioral;
Go to most recent revision | Compare with Previous | Blame | View Log