OpenCores
URL https://opencores.org/ocsvn/uart_block/uart_block/trunk

Subversion Repositories uart_block

[/] [uart_block/] [trunk/] [hdl/] [iseProject/] [_xmsgs/] [xst.xmsgs] - Rev 34

Go to most recent revision | Compare with Previous | Blame | View Log

<?xml version="1.0" encoding="UTF-8"?>
<!-- IMPORTANT: This is an internal file that has been generated
     by the Xilinx ISE software.  Any direct editing or
     changes made to this file may result in unpredictable
     behavior or data corruption.  It is strongly advised that
     users do not edit the contents of this file. -->
<messages>
<msg type="warning" file="Xst" num="753" delta="old" >&quot;<arg fmt="%s" index="1">E:/uart_block/hdl/iseProject/INTERCON_P2P.vhd</arg>&quot; line <arg fmt="%d" index="2">80</arg>: Unconnected output port &apos;<arg fmt="%s" index="3">CYC_O</arg>&apos; of component &apos;<arg fmt="%s" index="4">SERIALMASTER</arg>&apos;.
</msg>

<msg type="warning" file="Xst" num="753" delta="old" >&quot;<arg fmt="%s" index="1">E:/uart_block/hdl/iseProject/INTERCON_P2P.vhd</arg>&quot; line <arg fmt="%d" index="2">80</arg>: Unconnected output port &apos;<arg fmt="%s" index="3">SEL_O</arg>&apos; of component &apos;<arg fmt="%s" index="4">SERIALMASTER</arg>&apos;.
</msg>

<msg type="warning" file="Xst" num="753" delta="old" >&quot;<arg fmt="%s" index="1">E:/uart_block/hdl/iseProject/INTERCON_P2P.vhd</arg>&quot; line <arg fmt="%d" index="2">95</arg>: Unconnected output port &apos;<arg fmt="%s" index="3">data_Avaible</arg>&apos; of component &apos;<arg fmt="%s" index="4">uart_wishbone_slave</arg>&apos;.
</msg>

<msg type="warning" file="Xst" num="1610" delta="old" >&quot;<arg fmt="%s" index="1">E:/uart_block/hdl/iseProject/SERIALMASTER.vhd</arg>&quot; line <arg fmt="%d" index="2">46</arg>: Width mismatch. &lt;<arg fmt="%s" index="3">byteIncome</arg>&gt; has a width of <arg fmt="%d" index="4">8</arg> bits but assigned expression is <arg fmt="%d" index="5">32</arg>-bit wide.
</msg>

<msg type="warning" file="Xst" num="753" delta="old" >&quot;<arg fmt="%s" index="1">E:/uart_block/hdl/iseProject/uart_control.vhd</arg>&quot; line <arg fmt="%d" index="2">62</arg>: Unconnected output port &apos;<arg fmt="%s" index="3">reminder</arg>&apos; of component &apos;<arg fmt="%s" index="4">divisor</arg>&apos;.
</msg>

<msg type="warning" file="Xst" num="647" delta="old" >Input &lt;<arg fmt="%s" index="1">DAT_I&lt;31:8&gt;</arg>&gt; is never used. This port will be preserved and left unconnected if it belongs to a top-level block or it belongs to a sub-block and the hierarchy of this sub-block is preserved.
</msg>

<msg type="warning" file="Xst" num="1305" delta="old" >Output &lt;<arg fmt="%s" index="1">CYC_O</arg>&gt; is never assigned. Tied to value <arg fmt="%s" index="2">0</arg>.
</msg>

<msg type="warning" file="Xst" num="1305" delta="old" >Output &lt;<arg fmt="%s" index="1">SEL_O</arg>&gt; is never assigned. Tied to value <arg fmt="%s" index="2">0</arg>.
</msg>

<msg type="warning" file="Xst" num="647" delta="old" >Input &lt;<arg fmt="%s" index="1">baudClk</arg>&gt; is never used. This port will be preserved and left unconnected if it belongs to a top-level block or it belongs to a sub-block and the hierarchy of this sub-block is preserved.
</msg>

<msg type="warning" file="Xst" num="646" delta="new" >Signal &lt;<arg fmt="%s" index="1">getPoint</arg>&gt; is assigned but never used. This unconnected signal will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1306" delta="old" >Output &lt;<arg fmt="%s" index="1">data_avaible</arg>&gt; is never assigned.
</msg>

<msg type="info" file="Xst" num="2261" delta="old" >The FF/Latch &lt;<arg fmt="%s" index="1">cycle_wait_oversample_23</arg>&gt; in Unit &lt;<arg fmt="%s" index="2">uBaudGen</arg>&gt; is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4">&lt;half_cycle_25&gt; &lt;half_cycle0_22&gt; </arg>
</msg>

<msg type="info" file="Xst" num="2261" delta="old" >The FF/Latch &lt;<arg fmt="%s" index="1">cycle_wait_oversample_14</arg>&gt; in Unit &lt;<arg fmt="%s" index="2">uBaudGen</arg>&gt; is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4">&lt;half_cycle_16&gt; &lt;half_cycle0_13&gt; </arg>
</msg>

<msg type="info" file="Xst" num="2261" delta="old" >The FF/Latch &lt;<arg fmt="%s" index="1">cycle_wait_oversample_10</arg>&gt; in Unit &lt;<arg fmt="%s" index="2">uBaudGen</arg>&gt; is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4">&lt;half_cycle_12&gt; &lt;half_cycle0_9&gt; </arg>
</msg>

<msg type="info" file="Xst" num="2261" delta="old" >The FF/Latch &lt;<arg fmt="%s" index="1">cycle_wait_oversample_1</arg>&gt; in Unit &lt;<arg fmt="%s" index="2">uBaudGen</arg>&gt; is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4">&lt;half_cycle_3&gt; &lt;half_cycle0_0&gt; </arg>
</msg>

<msg type="info" file="Xst" num="2261" delta="old" >The FF/Latch &lt;<arg fmt="%s" index="1">cycle_wait_oversample_4</arg>&gt; in Unit &lt;<arg fmt="%s" index="2">uBaudGen</arg>&gt; is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4">&lt;half_cycle_6&gt; &lt;half_cycle0_3&gt; </arg>
</msg>

<msg type="info" file="Xst" num="2261" delta="old" >The FF/Latch &lt;<arg fmt="%s" index="1">cycle_wait_oversample_28</arg>&gt; in Unit &lt;<arg fmt="%s" index="2">uBaudGen</arg>&gt; is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4">&lt;half_cycle_30&gt; &lt;half_cycle0_27&gt; </arg>
</msg>

<msg type="info" file="Xst" num="2261" delta="old" >The FF/Latch &lt;<arg fmt="%s" index="1">cycle_wait_oversample_24</arg>&gt; in Unit &lt;<arg fmt="%s" index="2">uBaudGen</arg>&gt; is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4">&lt;half_cycle_26&gt; &lt;half_cycle0_23&gt; </arg>
</msg>

<msg type="info" file="Xst" num="2261" delta="old" >The FF/Latch &lt;<arg fmt="%s" index="1">cycle_wait_oversample_19</arg>&gt; in Unit &lt;<arg fmt="%s" index="2">uBaudGen</arg>&gt; is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4">&lt;half_cycle_21&gt; &lt;half_cycle0_18&gt; </arg>
</msg>

<msg type="info" file="Xst" num="2261" delta="old" >The FF/Latch &lt;<arg fmt="%s" index="1">cycle_wait_oversample_22</arg>&gt; in Unit &lt;<arg fmt="%s" index="2">uBaudGen</arg>&gt; is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4">&lt;half_cycle_24&gt; &lt;half_cycle0_21&gt; </arg>
</msg>

<msg type="info" file="Xst" num="2261" delta="old" >The FF/Latch &lt;<arg fmt="%s" index="1">cycle_wait_oversample_13</arg>&gt; in Unit &lt;<arg fmt="%s" index="2">uBaudGen</arg>&gt; is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4">&lt;half_cycle_15&gt; &lt;half_cycle0_12&gt; </arg>
</msg>

<msg type="info" file="Xst" num="2261" delta="old" >The FF/Latch &lt;<arg fmt="%s" index="1">cycle_wait_oversample_0</arg>&gt; in Unit &lt;<arg fmt="%s" index="2">uBaudGen</arg>&gt; is equivalent to the following <arg fmt="%s" index="3">FF/Latch</arg>, which will be removed : <arg fmt="%s" index="4">&lt;half_cycle_2&gt; </arg>
</msg>

<msg type="info" file="Xst" num="2261" delta="old" >The FF/Latch &lt;<arg fmt="%s" index="1">cycle_wait_oversample_27</arg>&gt; in Unit &lt;<arg fmt="%s" index="2">uBaudGen</arg>&gt; is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4">&lt;half_cycle_29&gt; &lt;half_cycle0_26&gt; </arg>
</msg>

<msg type="info" file="Xst" num="2261" delta="old" >The FF/Latch &lt;<arg fmt="%s" index="1">cycle_wait_oversample_2</arg>&gt; in Unit &lt;<arg fmt="%s" index="2">uBaudGen</arg>&gt; is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4">&lt;half_cycle_4&gt; &lt;half_cycle0_1&gt; </arg>
</msg>

<msg type="info" file="Xst" num="2261" delta="old" >The FF/Latch &lt;<arg fmt="%s" index="1">cycle_wait_oversample_29</arg>&gt; in Unit &lt;<arg fmt="%s" index="2">uBaudGen</arg>&gt; is equivalent to the following <arg fmt="%s" index="3">7 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4">&lt;cycle_wait_oversample_31&gt; &lt;cycle_wait_oversample_30&gt; &lt;half_cycle_31&gt; &lt;half_cycle0_31&gt; &lt;half_cycle0_30&gt; &lt;half_cycle0_29&gt; &lt;half_cycle0_28&gt; </arg>
</msg>

<msg type="info" file="Xst" num="2261" delta="old" >The FF/Latch &lt;<arg fmt="%s" index="1">cycle_wait_oversample_18</arg>&gt; in Unit &lt;<arg fmt="%s" index="2">uBaudGen</arg>&gt; is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4">&lt;half_cycle_20&gt; &lt;half_cycle0_17&gt; </arg>
</msg>

<msg type="info" file="Xst" num="2261" delta="old" >The FF/Latch &lt;<arg fmt="%s" index="1">cycle_wait_oversample_8</arg>&gt; in Unit &lt;<arg fmt="%s" index="2">uBaudGen</arg>&gt; is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4">&lt;half_cycle_10&gt; &lt;half_cycle0_7&gt; </arg>
</msg>

<msg type="info" file="Xst" num="2261" delta="old" >The FF/Latch &lt;<arg fmt="%s" index="1">cycle_wait_oversample_5</arg>&gt; in Unit &lt;<arg fmt="%s" index="2">uBaudGen</arg>&gt; is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4">&lt;half_cycle_7&gt; &lt;half_cycle0_4&gt; </arg>
</msg>

<msg type="info" file="Xst" num="2261" delta="old" >The FF/Latch &lt;<arg fmt="%s" index="1">cycle_wait_oversample_21</arg>&gt; in Unit &lt;<arg fmt="%s" index="2">uBaudGen</arg>&gt; is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4">&lt;half_cycle_23&gt; &lt;half_cycle0_20&gt; </arg>
</msg>

<msg type="info" file="Xst" num="2261" delta="old" >The FF/Latch &lt;<arg fmt="%s" index="1">cycle_wait_oversample_16</arg>&gt; in Unit &lt;<arg fmt="%s" index="2">uBaudGen</arg>&gt; is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4">&lt;half_cycle_18&gt; &lt;half_cycle0_15&gt; </arg>
</msg>

<msg type="info" file="Xst" num="2261" delta="old" >The FF/Latch &lt;<arg fmt="%s" index="1">cycle_wait_oversample_12</arg>&gt; in Unit &lt;<arg fmt="%s" index="2">uBaudGen</arg>&gt; is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4">&lt;half_cycle_14&gt; &lt;half_cycle0_11&gt; </arg>
</msg>

<msg type="info" file="Xst" num="2261" delta="old" >The FF/Latch &lt;<arg fmt="%s" index="1">cycle_wait_oversample_26</arg>&gt; in Unit &lt;<arg fmt="%s" index="2">uBaudGen</arg>&gt; is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4">&lt;half_cycle_28&gt; &lt;half_cycle0_25&gt; </arg>
</msg>

<msg type="info" file="Xst" num="2261" delta="old" >The FF/Latch &lt;<arg fmt="%s" index="1">cycle_wait_oversample_7</arg>&gt; in Unit &lt;<arg fmt="%s" index="2">uBaudGen</arg>&gt; is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4">&lt;half_cycle_9&gt; &lt;half_cycle0_6&gt; </arg>
</msg>

<msg type="info" file="Xst" num="2261" delta="old" >The FF/Latch &lt;<arg fmt="%s" index="1">cycle_wait_oversample_17</arg>&gt; in Unit &lt;<arg fmt="%s" index="2">uBaudGen</arg>&gt; is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4">&lt;half_cycle_19&gt; &lt;half_cycle0_16&gt; </arg>
</msg>

<msg type="info" file="Xst" num="2261" delta="old" >The FF/Latch &lt;<arg fmt="%s" index="1">cycle_wait_oversample_20</arg>&gt; in Unit &lt;<arg fmt="%s" index="2">uBaudGen</arg>&gt; is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4">&lt;half_cycle_22&gt; &lt;half_cycle0_19&gt; </arg>
</msg>

<msg type="info" file="Xst" num="2261" delta="old" >The FF/Latch &lt;<arg fmt="%s" index="1">cycle_wait_oversample_15</arg>&gt; in Unit &lt;<arg fmt="%s" index="2">uBaudGen</arg>&gt; is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4">&lt;half_cycle_17&gt; &lt;half_cycle0_14&gt; </arg>
</msg>

<msg type="info" file="Xst" num="2261" delta="old" >The FF/Latch &lt;<arg fmt="%s" index="1">cycle_wait_oversample_3</arg>&gt; in Unit &lt;<arg fmt="%s" index="2">uBaudGen</arg>&gt; is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4">&lt;half_cycle_5&gt; &lt;half_cycle0_2&gt; </arg>
</msg>

<msg type="info" file="Xst" num="2261" delta="old" >The FF/Latch &lt;<arg fmt="%s" index="1">cycle_wait_oversample_9</arg>&gt; in Unit &lt;<arg fmt="%s" index="2">uBaudGen</arg>&gt; is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4">&lt;half_cycle_11&gt; &lt;half_cycle0_8&gt; </arg>
</msg>

<msg type="info" file="Xst" num="2261" delta="old" >The FF/Latch &lt;<arg fmt="%s" index="1">cycle_wait_oversample_11</arg>&gt; in Unit &lt;<arg fmt="%s" index="2">uBaudGen</arg>&gt; is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4">&lt;half_cycle_13&gt; &lt;half_cycle0_10&gt; </arg>
</msg>

<msg type="info" file="Xst" num="2261" delta="old" >The FF/Latch &lt;<arg fmt="%s" index="1">cycle_wait_oversample_6</arg>&gt; in Unit &lt;<arg fmt="%s" index="2">uBaudGen</arg>&gt; is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4">&lt;half_cycle_8&gt; &lt;half_cycle0_5&gt; </arg>
</msg>

<msg type="info" file="Xst" num="2261" delta="old" >The FF/Latch &lt;<arg fmt="%s" index="1">cycle_wait_oversample_25</arg>&gt; in Unit &lt;<arg fmt="%s" index="2">uBaudGen</arg>&gt; is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4">&lt;half_cycle_27&gt; &lt;half_cycle0_24&gt; </arg>
</msg>

<msg type="warning" file="Xst" num="1710" delta="old" >FF/Latch &lt;<arg fmt="%s" index="1">N_24</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">uDiv</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1710" delta="old" >FF/Latch &lt;<arg fmt="%s" index="1">N_18</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">uDiv</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1710" delta="old" >FF/Latch &lt;<arg fmt="%s" index="1">N_11</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">uDiv</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1710" delta="old" >FF/Latch &lt;<arg fmt="%s" index="1">N_10</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">uDiv</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1710" delta="old" >FF/Latch &lt;<arg fmt="%s" index="1">N_8</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">uDiv</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1710" delta="old" >FF/Latch &lt;<arg fmt="%s" index="1">config_clk_8</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">uUartControl</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1710" delta="old" >FF/Latch &lt;<arg fmt="%s" index="1">config_clk_10</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">uUartControl</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1710" delta="old" >FF/Latch &lt;<arg fmt="%s" index="1">config_clk_11</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">uUartControl</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1710" delta="old" >FF/Latch &lt;<arg fmt="%s" index="1">config_clk_18</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">uUartControl</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1710" delta="old" >FF/Latch &lt;<arg fmt="%s" index="1">config_clk_24</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">uUartControl</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1710" delta="old" >FF/Latch &lt;<arg fmt="%s" index="1">config_clk_26</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">uUartControl</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1710" delta="old" >FF/Latch &lt;<arg fmt="%s" index="1">config_clk_27</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">uUartControl</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1710" delta="old" >FF/Latch &lt;<arg fmt="%s" index="1">config_clk_28</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">uUartControl</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1710" delta="old" >FF/Latch &lt;<arg fmt="%s" index="1">config_clk_29</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">uUartControl</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1710" delta="old" >FF/Latch &lt;<arg fmt="%s" index="1">config_clk_30</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">uUartControl</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1710" delta="old" >FF/Latch &lt;<arg fmt="%s" index="1">config_clk_31</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">uUartControl</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1710" delta="old" >FF/Latch &lt;<arg fmt="%s" index="1">config_baud_8</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">uUartControl</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1710" delta="old" >FF/Latch &lt;<arg fmt="%s" index="1">config_baud_10</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">uUartControl</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1710" delta="old" >FF/Latch &lt;<arg fmt="%s" index="1">config_baud_11</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">uUartControl</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1710" delta="old" >FF/Latch &lt;<arg fmt="%s" index="1">config_baud_18</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">uUartControl</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1710" delta="old" >FF/Latch &lt;<arg fmt="%s" index="1">config_baud_24</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">uUartControl</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1710" delta="old" >FF/Latch &lt;<arg fmt="%s" index="1">config_baud_26</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">uUartControl</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1710" delta="old" >FF/Latch &lt;<arg fmt="%s" index="1">config_baud_27</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">uUartControl</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1710" delta="old" >FF/Latch &lt;<arg fmt="%s" index="1">config_baud_28</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">uUartControl</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1710" delta="old" >FF/Latch &lt;<arg fmt="%s" index="1">config_baud_29</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">uUartControl</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1710" delta="old" >FF/Latch &lt;<arg fmt="%s" index="1">config_baud_30</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">uUartControl</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1710" delta="old" >FF/Latch &lt;<arg fmt="%s" index="1">config_baud_31</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">uUartControl</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1710" delta="old" >FF/Latch &lt;<arg fmt="%s" index="1">cycle_wait_oversample_29</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">uBaudGen</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1710" delta="old" >FF/Latch &lt;<arg fmt="%s" index="1">DAT_O_8</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">uMasterSerial</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1710" delta="old" >FF/Latch &lt;<arg fmt="%s" index="1">DAT_O_10</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">uMasterSerial</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1710" delta="old" >FF/Latch &lt;<arg fmt="%s" index="1">DAT_O_11</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">uMasterSerial</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1710" delta="old" >FF/Latch &lt;<arg fmt="%s" index="1">DAT_O_18</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">uMasterSerial</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1710" delta="old" >FF/Latch &lt;<arg fmt="%s" index="1">DAT_O_24</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">uMasterSerial</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1710" delta="old" >FF/Latch &lt;<arg fmt="%s" index="1">DAT_O_26</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">uMasterSerial</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1710" delta="old" >FF/Latch &lt;<arg fmt="%s" index="1">DAT_O_27</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">uMasterSerial</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1710" delta="old" >FF/Latch &lt;<arg fmt="%s" index="1">DAT_O_28</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">uMasterSerial</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1710" delta="old" >FF/Latch &lt;<arg fmt="%s" index="1">DAT_O_29</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">uMasterSerial</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1710" delta="old" >FF/Latch &lt;<arg fmt="%s" index="1">DAT_O_30</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">uMasterSerial</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1710" delta="old" >FF/Latch &lt;<arg fmt="%s" index="1">DAT_O_31</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">uMasterSerial</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1710" delta="old" >FF/Latch &lt;<arg fmt="%s" index="1">D_31</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">uDiv</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1710" delta="old" >FF/Latch &lt;<arg fmt="%s" index="1">D_28</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">uDiv</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1710" delta="old" >FF/Latch &lt;<arg fmt="%s" index="1">D_30</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">uDiv</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1710" delta="old" >FF/Latch &lt;<arg fmt="%s" index="1">N_27</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">uDiv</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1710" delta="old" >FF/Latch &lt;<arg fmt="%s" index="1">N_28</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">uDiv</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1710" delta="old" >FF/Latch &lt;<arg fmt="%s" index="1">N_26</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">uDiv</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1710" delta="old" >FF/Latch &lt;<arg fmt="%s" index="1">N_29</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">uDiv</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1710" delta="old" >FF/Latch &lt;<arg fmt="%s" index="1">N_30</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">uDiv</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1710" delta="old" >FF/Latch &lt;<arg fmt="%s" index="1">N_31</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">uDiv</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1710" delta="old" >FF/Latch &lt;<arg fmt="%s" index="1">D_8</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">uDiv</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1710" delta="old" >FF/Latch &lt;<arg fmt="%s" index="1">D_29</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">uDiv</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1710" delta="old" >FF/Latch &lt;<arg fmt="%s" index="1">D_27</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">uDiv</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1710" delta="old" >FF/Latch &lt;<arg fmt="%s" index="1">D_26</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">uDiv</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1710" delta="old" >FF/Latch &lt;<arg fmt="%s" index="1">D_10</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">uDiv</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1710" delta="old" >FF/Latch &lt;<arg fmt="%s" index="1">D_11</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">uDiv</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1710" delta="old" >FF/Latch &lt;<arg fmt="%s" index="1">D_24</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">uDiv</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1710" delta="old" >FF/Latch &lt;<arg fmt="%s" index="1">D_18</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">uDiv</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch &lt;<arg fmt="%s" index="1">sigDivDividend_31</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">uUartControl</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch &lt;<arg fmt="%s" index="1">sigDivDividend_30</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">uUartControl</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch &lt;<arg fmt="%s" index="1">sigDivDividend_29</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">uUartControl</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch &lt;<arg fmt="%s" index="1">sigDivDividend_28</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">uUartControl</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch &lt;<arg fmt="%s" index="1">sigDivDividend_27</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">uUartControl</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch &lt;<arg fmt="%s" index="1">sigDivDividend_26</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">uUartControl</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch &lt;<arg fmt="%s" index="1">sigDivDividend_24</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">uUartControl</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch &lt;<arg fmt="%s" index="1">sigDivDividend_18</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">uUartControl</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch &lt;<arg fmt="%s" index="1">sigDivDividend_11</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">uUartControl</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch &lt;<arg fmt="%s" index="1">sigDivDividend_10</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">uUartControl</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch &lt;<arg fmt="%s" index="1">sigDivDividend_8</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">uUartControl</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch &lt;<arg fmt="%s" index="1">sigDivNumerator_31</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">uUartControl</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch &lt;<arg fmt="%s" index="1">sigDivNumerator_30</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">uUartControl</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch &lt;<arg fmt="%s" index="1">sigDivNumerator_29</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">uUartControl</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch &lt;<arg fmt="%s" index="1">sigDivNumerator_28</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">uUartControl</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch &lt;<arg fmt="%s" index="1">sigDivNumerator_27</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">uUartControl</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch &lt;<arg fmt="%s" index="1">sigDivNumerator_26</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">uUartControl</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch &lt;<arg fmt="%s" index="1">sigDivNumerator_24</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">uUartControl</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch &lt;<arg fmt="%s" index="1">sigDivNumerator_18</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">uUartControl</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch &lt;<arg fmt="%s" index="1">sigDivNumerator_11</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">uUartControl</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch &lt;<arg fmt="%s" index="1">sigDivNumerator_10</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">uUartControl</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch &lt;<arg fmt="%s" index="1">sigDivNumerator_8</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">uUartControl</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1710" delta="old" >FF/Latch &lt;<arg fmt="%s" index="1">DAT_O_8</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">SERIALMASTER</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch &lt;<arg fmt="%s" index="1">DAT_O_10</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">SERIALMASTER</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch &lt;<arg fmt="%s" index="1">DAT_O_11</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">SERIALMASTER</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch &lt;<arg fmt="%s" index="1">DAT_O_18</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">SERIALMASTER</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch &lt;<arg fmt="%s" index="1">DAT_O_24</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">SERIALMASTER</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch &lt;<arg fmt="%s" index="1">DAT_O_26</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">SERIALMASTER</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch &lt;<arg fmt="%s" index="1">DAT_O_27</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">SERIALMASTER</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch &lt;<arg fmt="%s" index="1">DAT_O_28</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">SERIALMASTER</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch &lt;<arg fmt="%s" index="1">DAT_O_29</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">SERIALMASTER</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch &lt;<arg fmt="%s" index="1">DAT_O_30</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">SERIALMASTER</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch &lt;<arg fmt="%s" index="1">DAT_O_31</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">SERIALMASTER</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1710" delta="old" >FF/Latch &lt;<arg fmt="%s" index="1">cycle_wait_oversample_29</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">baud_generator</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch &lt;<arg fmt="%s" index="1">cycle_wait_oversample_31</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">baud_generator</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch &lt;<arg fmt="%s" index="1">cycle_wait_oversample_30</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">baud_generator</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch &lt;<arg fmt="%s" index="1">half_cycle_31</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">baud_generator</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch &lt;<arg fmt="%s" index="1">half_cycle0_31</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">baud_generator</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch &lt;<arg fmt="%s" index="1">half_cycle0_30</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">baud_generator</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch &lt;<arg fmt="%s" index="1">half_cycle0_29</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">baud_generator</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch &lt;<arg fmt="%s" index="1">half_cycle0_28</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">baud_generator</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="info" file="Xst" num="2261" delta="old" >The FF/Latch &lt;<arg fmt="%s" index="1">cycle_wait_oversample_23</arg>&gt; in Unit &lt;<arg fmt="%s" index="2">baud_generator</arg>&gt; is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4">&lt;half_cycle_25&gt; &lt;half_cycle0_22&gt; </arg>
</msg>

<msg type="info" file="Xst" num="2261" delta="old" >The FF/Latch &lt;<arg fmt="%s" index="1">cycle_wait_oversample_14</arg>&gt; in Unit &lt;<arg fmt="%s" index="2">baud_generator</arg>&gt; is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4">&lt;half_cycle_16&gt; &lt;half_cycle0_13&gt; </arg>
</msg>

<msg type="info" file="Xst" num="2261" delta="old" >The FF/Latch &lt;<arg fmt="%s" index="1">cycle_wait_oversample_10</arg>&gt; in Unit &lt;<arg fmt="%s" index="2">baud_generator</arg>&gt; is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4">&lt;half_cycle_12&gt; &lt;half_cycle0_9&gt; </arg>
</msg>

<msg type="info" file="Xst" num="2261" delta="old" >The FF/Latch &lt;<arg fmt="%s" index="1">cycle_wait_oversample_1</arg>&gt; in Unit &lt;<arg fmt="%s" index="2">baud_generator</arg>&gt; is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4">&lt;half_cycle_3&gt; &lt;half_cycle0_0&gt; </arg>
</msg>

<msg type="info" file="Xst" num="2261" delta="old" >The FF/Latch &lt;<arg fmt="%s" index="1">cycle_wait_oversample_4</arg>&gt; in Unit &lt;<arg fmt="%s" index="2">baud_generator</arg>&gt; is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4">&lt;half_cycle_6&gt; &lt;half_cycle0_3&gt; </arg>
</msg>

<msg type="info" file="Xst" num="2261" delta="old" >The FF/Latch &lt;<arg fmt="%s" index="1">cycle_wait_oversample_28</arg>&gt; in Unit &lt;<arg fmt="%s" index="2">baud_generator</arg>&gt; is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4">&lt;half_cycle_30&gt; &lt;half_cycle0_27&gt; </arg>
</msg>

<msg type="info" file="Xst" num="2261" delta="old" >The FF/Latch &lt;<arg fmt="%s" index="1">cycle_wait_oversample_24</arg>&gt; in Unit &lt;<arg fmt="%s" index="2">baud_generator</arg>&gt; is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4">&lt;half_cycle_26&gt; &lt;half_cycle0_23&gt; </arg>
</msg>

<msg type="info" file="Xst" num="2261" delta="old" >The FF/Latch &lt;<arg fmt="%s" index="1">cycle_wait_oversample_19</arg>&gt; in Unit &lt;<arg fmt="%s" index="2">baud_generator</arg>&gt; is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4">&lt;half_cycle_21&gt; &lt;half_cycle0_18&gt; </arg>
</msg>

<msg type="info" file="Xst" num="2261" delta="old" >The FF/Latch &lt;<arg fmt="%s" index="1">cycle_wait_oversample_22</arg>&gt; in Unit &lt;<arg fmt="%s" index="2">baud_generator</arg>&gt; is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4">&lt;half_cycle_24&gt; &lt;half_cycle0_21&gt; </arg>
</msg>

<msg type="info" file="Xst" num="2261" delta="old" >The FF/Latch &lt;<arg fmt="%s" index="1">cycle_wait_oversample_13</arg>&gt; in Unit &lt;<arg fmt="%s" index="2">baud_generator</arg>&gt; is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4">&lt;half_cycle_15&gt; &lt;half_cycle0_12&gt; </arg>
</msg>

<msg type="info" file="Xst" num="2261" delta="old" >The FF/Latch &lt;<arg fmt="%s" index="1">cycle_wait_oversample_0</arg>&gt; in Unit &lt;<arg fmt="%s" index="2">baud_generator</arg>&gt; is equivalent to the following <arg fmt="%s" index="3">FF/Latch</arg>, which will be removed : <arg fmt="%s" index="4">&lt;half_cycle_2&gt; </arg>
</msg>

<msg type="info" file="Xst" num="2261" delta="old" >The FF/Latch &lt;<arg fmt="%s" index="1">cycle_wait_oversample_27</arg>&gt; in Unit &lt;<arg fmt="%s" index="2">baud_generator</arg>&gt; is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4">&lt;half_cycle_29&gt; &lt;half_cycle0_26&gt; </arg>
</msg>

<msg type="info" file="Xst" num="2261" delta="old" >The FF/Latch &lt;<arg fmt="%s" index="1">cycle_wait_oversample_2</arg>&gt; in Unit &lt;<arg fmt="%s" index="2">baud_generator</arg>&gt; is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4">&lt;half_cycle_4&gt; &lt;half_cycle0_1&gt; </arg>
</msg>

<msg type="info" file="Xst" num="2261" delta="old" >The FF/Latch &lt;<arg fmt="%s" index="1">cycle_wait_oversample_18</arg>&gt; in Unit &lt;<arg fmt="%s" index="2">baud_generator</arg>&gt; is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4">&lt;half_cycle_20&gt; &lt;half_cycle0_17&gt; </arg>
</msg>

<msg type="info" file="Xst" num="2261" delta="old" >The FF/Latch &lt;<arg fmt="%s" index="1">cycle_wait_oversample_8</arg>&gt; in Unit &lt;<arg fmt="%s" index="2">baud_generator</arg>&gt; is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4">&lt;half_cycle_10&gt; &lt;half_cycle0_7&gt; </arg>
</msg>

<msg type="info" file="Xst" num="2261" delta="old" >The FF/Latch &lt;<arg fmt="%s" index="1">cycle_wait_oversample_5</arg>&gt; in Unit &lt;<arg fmt="%s" index="2">baud_generator</arg>&gt; is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4">&lt;half_cycle_7&gt; &lt;half_cycle0_4&gt; </arg>
</msg>

<msg type="info" file="Xst" num="2261" delta="old" >The FF/Latch &lt;<arg fmt="%s" index="1">cycle_wait_oversample_21</arg>&gt; in Unit &lt;<arg fmt="%s" index="2">baud_generator</arg>&gt; is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4">&lt;half_cycle_23&gt; &lt;half_cycle0_20&gt; </arg>
</msg>

<msg type="info" file="Xst" num="2261" delta="old" >The FF/Latch &lt;<arg fmt="%s" index="1">cycle_wait_oversample_16</arg>&gt; in Unit &lt;<arg fmt="%s" index="2">baud_generator</arg>&gt; is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4">&lt;half_cycle_18&gt; &lt;half_cycle0_15&gt; </arg>
</msg>

<msg type="info" file="Xst" num="2261" delta="old" >The FF/Latch &lt;<arg fmt="%s" index="1">cycle_wait_oversample_12</arg>&gt; in Unit &lt;<arg fmt="%s" index="2">baud_generator</arg>&gt; is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4">&lt;half_cycle_14&gt; &lt;half_cycle0_11&gt; </arg>
</msg>

<msg type="info" file="Xst" num="2261" delta="old" >The FF/Latch &lt;<arg fmt="%s" index="1">cycle_wait_oversample_26</arg>&gt; in Unit &lt;<arg fmt="%s" index="2">baud_generator</arg>&gt; is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4">&lt;half_cycle_28&gt; &lt;half_cycle0_25&gt; </arg>
</msg>

<msg type="info" file="Xst" num="2261" delta="old" >The FF/Latch &lt;<arg fmt="%s" index="1">cycle_wait_oversample_7</arg>&gt; in Unit &lt;<arg fmt="%s" index="2">baud_generator</arg>&gt; is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4">&lt;half_cycle_9&gt; &lt;half_cycle0_6&gt; </arg>
</msg>

<msg type="info" file="Xst" num="2261" delta="old" >The FF/Latch &lt;<arg fmt="%s" index="1">cycle_wait_oversample_17</arg>&gt; in Unit &lt;<arg fmt="%s" index="2">baud_generator</arg>&gt; is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4">&lt;half_cycle_19&gt; &lt;half_cycle0_16&gt; </arg>
</msg>

<msg type="info" file="Xst" num="2261" delta="old" >The FF/Latch &lt;<arg fmt="%s" index="1">cycle_wait_oversample_20</arg>&gt; in Unit &lt;<arg fmt="%s" index="2">baud_generator</arg>&gt; is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4">&lt;half_cycle_22&gt; &lt;half_cycle0_19&gt; </arg>
</msg>

<msg type="info" file="Xst" num="2261" delta="old" >The FF/Latch &lt;<arg fmt="%s" index="1">cycle_wait_oversample_15</arg>&gt; in Unit &lt;<arg fmt="%s" index="2">baud_generator</arg>&gt; is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4">&lt;half_cycle_17&gt; &lt;half_cycle0_14&gt; </arg>
</msg>

<msg type="info" file="Xst" num="2261" delta="old" >The FF/Latch &lt;<arg fmt="%s" index="1">cycle_wait_oversample_3</arg>&gt; in Unit &lt;<arg fmt="%s" index="2">baud_generator</arg>&gt; is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4">&lt;half_cycle_5&gt; &lt;half_cycle0_2&gt; </arg>
</msg>

<msg type="info" file="Xst" num="2261" delta="old" >The FF/Latch &lt;<arg fmt="%s" index="1">cycle_wait_oversample_9</arg>&gt; in Unit &lt;<arg fmt="%s" index="2">baud_generator</arg>&gt; is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4">&lt;half_cycle_11&gt; &lt;half_cycle0_8&gt; </arg>
</msg>

<msg type="info" file="Xst" num="2261" delta="old" >The FF/Latch &lt;<arg fmt="%s" index="1">cycle_wait_oversample_11</arg>&gt; in Unit &lt;<arg fmt="%s" index="2">baud_generator</arg>&gt; is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4">&lt;half_cycle_13&gt; &lt;half_cycle0_10&gt; </arg>
</msg>

<msg type="info" file="Xst" num="2261" delta="old" >The FF/Latch &lt;<arg fmt="%s" index="1">cycle_wait_oversample_6</arg>&gt; in Unit &lt;<arg fmt="%s" index="2">baud_generator</arg>&gt; is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4">&lt;half_cycle_8&gt; &lt;half_cycle0_5&gt; </arg>
</msg>

<msg type="info" file="Xst" num="2261" delta="old" >The FF/Latch &lt;<arg fmt="%s" index="1">cycle_wait_oversample_25</arg>&gt; in Unit &lt;<arg fmt="%s" index="2">baud_generator</arg>&gt; is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4">&lt;half_cycle_27&gt; &lt;half_cycle0_24&gt; </arg>
</msg>

<msg type="warning" file="Xst" num="1293" delta="old" >FF/Latch &lt;<arg fmt="%s" index="1">cycles2Wait_0</arg>&gt; has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">SERIALMASTER</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1896" delta="old" >Due to other FF/Latch trimming, FF/Latch &lt;<arg fmt="%s" index="1">cycles2Wait_1</arg>&gt; has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">SERIALMASTER</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1896" delta="old" >Due to other FF/Latch trimming, FF/Latch &lt;<arg fmt="%s" index="1">cycles2Wait_2</arg>&gt; has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">SERIALMASTER</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1896" delta="old" >Due to other FF/Latch trimming, FF/Latch &lt;<arg fmt="%s" index="1">cycles2Wait_3</arg>&gt; has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">SERIALMASTER</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1896" delta="old" >Due to other FF/Latch trimming, FF/Latch &lt;<arg fmt="%s" index="1">cycles2Wait_4</arg>&gt; has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">SERIALMASTER</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1896" delta="old" >Due to other FF/Latch trimming, FF/Latch &lt;<arg fmt="%s" index="1">cycles2Wait_5</arg>&gt; has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">SERIALMASTER</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1896" delta="old" >Due to other FF/Latch trimming, FF/Latch &lt;<arg fmt="%s" index="1">cycles2Wait_23</arg>&gt; has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">SERIALMASTER</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1896" delta="old" >Due to other FF/Latch trimming, FF/Latch &lt;<arg fmt="%s" index="1">nextState_1</arg>&gt; has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">SERIALMASTER</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1896" delta="old" >Due to other FF/Latch trimming, FF/Latch &lt;<arg fmt="%s" index="1">nextState_5</arg>&gt; has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">SERIALMASTER</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="info" file="Xst" num="2261" delta="old" >The FF/Latch &lt;<arg fmt="%s" index="1">current_s_FSM_FFd1</arg>&gt; in Unit &lt;<arg fmt="%s" index="2">serial_receiver</arg>&gt; is equivalent to the following <arg fmt="%s" index="3">FF/Latch</arg>, which will be removed : <arg fmt="%s" index="4">&lt;data_ready&gt; </arg>
</msg>

<msg type="warning" file="Xst" num="2042" delta="old" >Unit <arg fmt="%s" index="1">uart_control</arg>: <arg fmt="%d" index="2">32</arg> internal tristates are replaced by logic (pull-up <arg fmt="%s" index="3">yes</arg>): </msg>

<msg type="warning" file="Xst" num="1293" delta="old" >FF/Latch &lt;<arg fmt="%s" index="1">waitBestPoint_3</arg>&gt; has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">serial_receiver</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1293" delta="old" >FF/Latch &lt;<arg fmt="%s" index="1">waitBestPoint_3</arg>&gt; has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">serial_receiver</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1293" delta="old" >FF/Latch &lt;<arg fmt="%s" index="1">waitBestPoint_3</arg>&gt; has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">serial_receiver</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1710" delta="old" >FF/Latch &lt;<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/Mtridata_DAT_O_8</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">INTERCON_P2P</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch &lt;<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/Mtridata_DAT_O_10</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">INTERCON_P2P</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch &lt;<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/Mtridata_DAT_O_11</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">INTERCON_P2P</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch &lt;<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/Mtridata_DAT_O_18</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">INTERCON_P2P</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch &lt;<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/Mtridata_DAT_O_24</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">INTERCON_P2P</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch &lt;<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/Mtridata_DAT_O_26</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">INTERCON_P2P</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch &lt;<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/Mtridata_DAT_O_27</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">INTERCON_P2P</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch &lt;<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/Mtridata_DAT_O_28</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">INTERCON_P2P</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch &lt;<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/Mtridata_DAT_O_29</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">INTERCON_P2P</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch &lt;<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/Mtridata_DAT_O_30</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">INTERCON_P2P</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch &lt;<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/Mtridata_DAT_O_31</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">INTERCON_P2P</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch &lt;<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/config_baud_31</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">INTERCON_P2P</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch &lt;<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/config_baud_30</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">INTERCON_P2P</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch &lt;<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/config_baud_29</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">INTERCON_P2P</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch &lt;<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/config_baud_28</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">INTERCON_P2P</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch &lt;<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/config_baud_27</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">INTERCON_P2P</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch &lt;<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/config_clk_8</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">INTERCON_P2P</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch &lt;<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/config_clk_10</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">INTERCON_P2P</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch &lt;<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/config_clk_11</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">INTERCON_P2P</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch &lt;<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/config_clk_18</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">INTERCON_P2P</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch &lt;<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/config_clk_24</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">INTERCON_P2P</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch &lt;<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/config_clk_26</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">INTERCON_P2P</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch &lt;<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/config_clk_27</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">INTERCON_P2P</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch &lt;<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/config_clk_28</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">INTERCON_P2P</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch &lt;<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/config_clk_29</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">INTERCON_P2P</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch &lt;<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/config_clk_30</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">INTERCON_P2P</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch &lt;<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/config_clk_31</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">INTERCON_P2P</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch &lt;<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/config_baud_8</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">INTERCON_P2P</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch &lt;<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/config_baud_10</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">INTERCON_P2P</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch &lt;<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/config_baud_11</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">INTERCON_P2P</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch &lt;<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/config_baud_18</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">INTERCON_P2P</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch &lt;<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/config_baud_24</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">INTERCON_P2P</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch &lt;<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/config_baud_26</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">INTERCON_P2P</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch &lt;<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/sigDivNumerator_31</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">INTERCON_P2P</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch &lt;<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/sigDivNumerator_30</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">INTERCON_P2P</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch &lt;<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/sigDivNumerator_29</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">INTERCON_P2P</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch &lt;<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/sigDivNumerator_28</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">INTERCON_P2P</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch &lt;<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/sigDivNumerator_27</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">INTERCON_P2P</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch &lt;<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/sigDivNumerator_26</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">INTERCON_P2P</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch &lt;<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/sigDivNumerator_24</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">INTERCON_P2P</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch &lt;<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/sigDivNumerator_18</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">INTERCON_P2P</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch &lt;<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/sigDivNumerator_11</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">INTERCON_P2P</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch &lt;<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/sigDivNumerator_10</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">INTERCON_P2P</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch &lt;<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/sigDivNumerator_8</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">INTERCON_P2P</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch &lt;<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/sigDivDividend_8</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">INTERCON_P2P</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch &lt;<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/sigDivDividend_10</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">INTERCON_P2P</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch &lt;<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/sigDivDividend_11</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">INTERCON_P2P</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch &lt;<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/sigDivDividend_18</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">INTERCON_P2P</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch &lt;<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/sigDivDividend_24</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">INTERCON_P2P</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch &lt;<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/sigDivDividend_26</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">INTERCON_P2P</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch &lt;<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/sigDivDividend_27</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">INTERCON_P2P</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch &lt;<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/sigDivDividend_28</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">INTERCON_P2P</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch &lt;<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/sigDivDividend_29</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">INTERCON_P2P</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch &lt;<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/sigDivDividend_30</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">INTERCON_P2P</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch &lt;<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/sigDivDividend_31</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">INTERCON_P2P</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch &lt;<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/D_8</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">INTERCON_P2P</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch &lt;<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/D_10</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">INTERCON_P2P</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch &lt;<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/D_11</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">INTERCON_P2P</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch &lt;<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/D_18</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">INTERCON_P2P</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch &lt;<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/D_24</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">INTERCON_P2P</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch &lt;<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/D_26</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">INTERCON_P2P</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch &lt;<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/D_27</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">INTERCON_P2P</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch &lt;<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/D_28</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">INTERCON_P2P</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch &lt;<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/D_30</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">INTERCON_P2P</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch &lt;<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/D_31</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">INTERCON_P2P</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch &lt;<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/D_29</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">INTERCON_P2P</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch &lt;<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/N_31</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">INTERCON_P2P</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch &lt;<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/N_30</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">INTERCON_P2P</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch &lt;<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/N_27</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">INTERCON_P2P</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch &lt;<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/N_29</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">INTERCON_P2P</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch &lt;<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/N_28</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">INTERCON_P2P</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch &lt;<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/N_26</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">INTERCON_P2P</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch &lt;<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/N_24</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">INTERCON_P2P</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch &lt;<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/N_18</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">INTERCON_P2P</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch &lt;<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/N_10</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">INTERCON_P2P</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch &lt;<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/N_11</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">INTERCON_P2P</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch &lt;<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/N_8</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">INTERCON_P2P</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="2677" delta="old" >Node &lt;<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/R_31</arg>&gt; of sequential type is unconnected in block &lt;<arg fmt="%s" index="2">INTERCON_P2P</arg>&gt;.
</msg>

<msg type="warning" file="Xst" num="2677" delta="old" >Node &lt;<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/reminder_0</arg>&gt; of sequential type is unconnected in block &lt;<arg fmt="%s" index="2">INTERCON_P2P</arg>&gt;.
</msg>

<msg type="warning" file="Xst" num="2677" delta="old" >Node &lt;<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/reminder_1</arg>&gt; of sequential type is unconnected in block &lt;<arg fmt="%s" index="2">INTERCON_P2P</arg>&gt;.
</msg>

<msg type="warning" file="Xst" num="2677" delta="old" >Node &lt;<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/reminder_2</arg>&gt; of sequential type is unconnected in block &lt;<arg fmt="%s" index="2">INTERCON_P2P</arg>&gt;.
</msg>

<msg type="warning" file="Xst" num="2677" delta="old" >Node &lt;<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/reminder_3</arg>&gt; of sequential type is unconnected in block &lt;<arg fmt="%s" index="2">INTERCON_P2P</arg>&gt;.
</msg>

<msg type="warning" file="Xst" num="2677" delta="old" >Node &lt;<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/reminder_4</arg>&gt; of sequential type is unconnected in block &lt;<arg fmt="%s" index="2">INTERCON_P2P</arg>&gt;.
</msg>

<msg type="warning" file="Xst" num="2677" delta="old" >Node &lt;<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/reminder_5</arg>&gt; of sequential type is unconnected in block &lt;<arg fmt="%s" index="2">INTERCON_P2P</arg>&gt;.
</msg>

<msg type="warning" file="Xst" num="2677" delta="old" >Node &lt;<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/reminder_6</arg>&gt; of sequential type is unconnected in block &lt;<arg fmt="%s" index="2">INTERCON_P2P</arg>&gt;.
</msg>

<msg type="warning" file="Xst" num="2677" delta="old" >Node &lt;<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/reminder_7</arg>&gt; of sequential type is unconnected in block &lt;<arg fmt="%s" index="2">INTERCON_P2P</arg>&gt;.
</msg>

<msg type="warning" file="Xst" num="2677" delta="old" >Node &lt;<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/reminder_8</arg>&gt; of sequential type is unconnected in block &lt;<arg fmt="%s" index="2">INTERCON_P2P</arg>&gt;.
</msg>

<msg type="warning" file="Xst" num="2677" delta="old" >Node &lt;<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/reminder_9</arg>&gt; of sequential type is unconnected in block &lt;<arg fmt="%s" index="2">INTERCON_P2P</arg>&gt;.
</msg>

<msg type="warning" file="Xst" num="2677" delta="old" >Node &lt;<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/reminder_10</arg>&gt; of sequential type is unconnected in block &lt;<arg fmt="%s" index="2">INTERCON_P2P</arg>&gt;.
</msg>

<msg type="warning" file="Xst" num="2677" delta="old" >Node &lt;<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/reminder_11</arg>&gt; of sequential type is unconnected in block &lt;<arg fmt="%s" index="2">INTERCON_P2P</arg>&gt;.
</msg>

<msg type="warning" file="Xst" num="2677" delta="old" >Node &lt;<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/reminder_12</arg>&gt; of sequential type is unconnected in block &lt;<arg fmt="%s" index="2">INTERCON_P2P</arg>&gt;.
</msg>

<msg type="warning" file="Xst" num="2677" delta="old" >Node &lt;<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/reminder_13</arg>&gt; of sequential type is unconnected in block &lt;<arg fmt="%s" index="2">INTERCON_P2P</arg>&gt;.
</msg>

<msg type="warning" file="Xst" num="2677" delta="old" >Node &lt;<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/reminder_14</arg>&gt; of sequential type is unconnected in block &lt;<arg fmt="%s" index="2">INTERCON_P2P</arg>&gt;.
</msg>

<msg type="warning" file="Xst" num="2677" delta="old" >Node &lt;<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/reminder_15</arg>&gt; of sequential type is unconnected in block &lt;<arg fmt="%s" index="2">INTERCON_P2P</arg>&gt;.
</msg>

<msg type="warning" file="Xst" num="2677" delta="old" >Node &lt;<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/reminder_16</arg>&gt; of sequential type is unconnected in block &lt;<arg fmt="%s" index="2">INTERCON_P2P</arg>&gt;.
</msg>

<msg type="warning" file="Xst" num="2677" delta="old" >Node &lt;<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/reminder_17</arg>&gt; of sequential type is unconnected in block &lt;<arg fmt="%s" index="2">INTERCON_P2P</arg>&gt;.
</msg>

<msg type="warning" file="Xst" num="2677" delta="old" >Node &lt;<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/reminder_18</arg>&gt; of sequential type is unconnected in block &lt;<arg fmt="%s" index="2">INTERCON_P2P</arg>&gt;.
</msg>

<msg type="warning" file="Xst" num="2677" delta="old" >Node &lt;<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/reminder_19</arg>&gt; of sequential type is unconnected in block &lt;<arg fmt="%s" index="2">INTERCON_P2P</arg>&gt;.
</msg>

<msg type="warning" file="Xst" num="2677" delta="old" >Node &lt;<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/reminder_20</arg>&gt; of sequential type is unconnected in block &lt;<arg fmt="%s" index="2">INTERCON_P2P</arg>&gt;.
</msg>

<msg type="warning" file="Xst" num="2677" delta="old" >Node &lt;<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/reminder_21</arg>&gt; of sequential type is unconnected in block &lt;<arg fmt="%s" index="2">INTERCON_P2P</arg>&gt;.
</msg>

<msg type="warning" file="Xst" num="2677" delta="old" >Node &lt;<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/reminder_22</arg>&gt; of sequential type is unconnected in block &lt;<arg fmt="%s" index="2">INTERCON_P2P</arg>&gt;.
</msg>

<msg type="warning" file="Xst" num="2677" delta="old" >Node &lt;<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/reminder_23</arg>&gt; of sequential type is unconnected in block &lt;<arg fmt="%s" index="2">INTERCON_P2P</arg>&gt;.
</msg>

<msg type="warning" file="Xst" num="2677" delta="old" >Node &lt;<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/reminder_24</arg>&gt; of sequential type is unconnected in block &lt;<arg fmt="%s" index="2">INTERCON_P2P</arg>&gt;.
</msg>

<msg type="warning" file="Xst" num="2677" delta="old" >Node &lt;<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/reminder_25</arg>&gt; of sequential type is unconnected in block &lt;<arg fmt="%s" index="2">INTERCON_P2P</arg>&gt;.
</msg>

<msg type="warning" file="Xst" num="2677" delta="old" >Node &lt;<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/reminder_26</arg>&gt; of sequential type is unconnected in block &lt;<arg fmt="%s" index="2">INTERCON_P2P</arg>&gt;.
</msg>

<msg type="warning" file="Xst" num="2677" delta="old" >Node &lt;<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/reminder_27</arg>&gt; of sequential type is unconnected in block &lt;<arg fmt="%s" index="2">INTERCON_P2P</arg>&gt;.
</msg>

<msg type="warning" file="Xst" num="2677" delta="old" >Node &lt;<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/reminder_28</arg>&gt; of sequential type is unconnected in block &lt;<arg fmt="%s" index="2">INTERCON_P2P</arg>&gt;.
</msg>

<msg type="warning" file="Xst" num="2677" delta="old" >Node &lt;<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/reminder_29</arg>&gt; of sequential type is unconnected in block &lt;<arg fmt="%s" index="2">INTERCON_P2P</arg>&gt;.
</msg>

<msg type="warning" file="Xst" num="2677" delta="old" >Node &lt;<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/reminder_30</arg>&gt; of sequential type is unconnected in block &lt;<arg fmt="%s" index="2">INTERCON_P2P</arg>&gt;.
</msg>

<msg type="warning" file="Xst" num="2677" delta="old" >Node &lt;<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/reminder_31</arg>&gt; of sequential type is unconnected in block &lt;<arg fmt="%s" index="2">INTERCON_P2P</arg>&gt;.
</msg>

<msg type="warning" file="Xst" num="1710" delta="old" >FF/Latch &lt;<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/Mtridata_DAT_O_31</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">INTERCON_P2P</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch &lt;<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/Mtridata_DAT_O_30</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">INTERCON_P2P</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch &lt;<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/Mtridata_DAT_O_29</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">INTERCON_P2P</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch &lt;<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/Mtridata_DAT_O_28</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">INTERCON_P2P</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch &lt;<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/Mtridata_DAT_O_27</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">INTERCON_P2P</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch &lt;<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/Mtridata_DAT_O_26</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">INTERCON_P2P</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch &lt;<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/Mtridata_DAT_O_24</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">INTERCON_P2P</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch &lt;<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/Mtridata_DAT_O_18</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">INTERCON_P2P</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch &lt;<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/Mtridata_DAT_O_11</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">INTERCON_P2P</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch &lt;<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/Mtridata_DAT_O_10</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">INTERCON_P2P</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch &lt;<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/Mtridata_DAT_O_8</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">INTERCON_P2P</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1710" delta="old" >FF/Latch &lt;<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/Mtridata_DAT_O_31</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">INTERCON_P2P</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1710" delta="old" >FF/Latch &lt;<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/Mtridata_DAT_O_30</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">INTERCON_P2P</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1710" delta="old" >FF/Latch &lt;<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/Mtridata_DAT_O_29</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">INTERCON_P2P</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1710" delta="old" >FF/Latch &lt;<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/Mtridata_DAT_O_28</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">INTERCON_P2P</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1710" delta="old" >FF/Latch &lt;<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/Mtridata_DAT_O_27</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">INTERCON_P2P</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1710" delta="old" >FF/Latch &lt;<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/Mtridata_DAT_O_26</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">INTERCON_P2P</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1710" delta="old" >FF/Latch &lt;<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/Mtridata_DAT_O_24</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">INTERCON_P2P</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1710" delta="old" >FF/Latch &lt;<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/Mtridata_DAT_O_18</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">INTERCON_P2P</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1710" delta="old" >FF/Latch &lt;<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/Mtridata_DAT_O_11</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">INTERCON_P2P</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1710" delta="old" >FF/Latch &lt;<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/Mtridata_DAT_O_10</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">INTERCON_P2P</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1710" delta="old" >FF/Latch &lt;<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/Mtridata_DAT_O_8</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">INTERCON_P2P</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="638" delta="old" >in unit <arg fmt="%s" index="1">INTERCON_P2P</arg> Conflict on KEEP property on signal <arg fmt="%s" index="2">uUartWishboneSlave/uUartControl/Mtridata_DAT_O&lt;11&gt;</arg> and <arg fmt="%s" index="3">uUartWishboneSlave/uUartControl/Mtridata_DAT_O&lt;10&gt;</arg> <arg fmt="%s" index="4">uUartWishboneSlave/uUartControl/Mtridata_DAT_O&lt;10&gt;</arg> signal will be lost.
</msg>

<msg type="warning" file="Xst" num="638" delta="old" >in unit <arg fmt="%s" index="1">INTERCON_P2P</arg> Conflict on KEEP property on signal <arg fmt="%s" index="2">uUartWishboneSlave/uUartControl/Mtridata_DAT_O&lt;18&gt;</arg> and <arg fmt="%s" index="3">uUartWishboneSlave/uUartControl/Mtridata_DAT_O&lt;10&gt;</arg> <arg fmt="%s" index="4">uUartWishboneSlave/uUartControl/Mtridata_DAT_O&lt;10&gt;</arg> signal will be lost.
</msg>

<msg type="warning" file="Xst" num="638" delta="old" >in unit <arg fmt="%s" index="1">INTERCON_P2P</arg> Conflict on KEEP property on signal <arg fmt="%s" index="2">uUartWishboneSlave/uUartControl/Mtridata_DAT_O&lt;24&gt;</arg> and <arg fmt="%s" index="3">uUartWishboneSlave/uUartControl/Mtridata_DAT_O&lt;10&gt;</arg> <arg fmt="%s" index="4">uUartWishboneSlave/uUartControl/Mtridata_DAT_O&lt;10&gt;</arg> signal will be lost.
</msg>

<msg type="warning" file="Xst" num="638" delta="old" >in unit <arg fmt="%s" index="1">INTERCON_P2P</arg> Conflict on KEEP property on signal <arg fmt="%s" index="2">uUartWishboneSlave/uUartControl/Mtridata_DAT_O&lt;26&gt;</arg> and <arg fmt="%s" index="3">uUartWishboneSlave/uUartControl/Mtridata_DAT_O&lt;10&gt;</arg> <arg fmt="%s" index="4">uUartWishboneSlave/uUartControl/Mtridata_DAT_O&lt;10&gt;</arg> signal will be lost.
</msg>

<msg type="warning" file="Xst" num="638" delta="old" >in unit <arg fmt="%s" index="1">INTERCON_P2P</arg> Conflict on KEEP property on signal <arg fmt="%s" index="2">uUartWishboneSlave/uUartControl/Mtridata_DAT_O&lt;27&gt;</arg> and <arg fmt="%s" index="3">uUartWishboneSlave/uUartControl/Mtridata_DAT_O&lt;10&gt;</arg> <arg fmt="%s" index="4">uUartWishboneSlave/uUartControl/Mtridata_DAT_O&lt;10&gt;</arg> signal will be lost.
</msg>

<msg type="warning" file="Xst" num="638" delta="old" >in unit <arg fmt="%s" index="1">INTERCON_P2P</arg> Conflict on KEEP property on signal <arg fmt="%s" index="2">uUartWishboneSlave/uUartControl/Mtridata_DAT_O&lt;28&gt;</arg> and <arg fmt="%s" index="3">uUartWishboneSlave/uUartControl/Mtridata_DAT_O&lt;10&gt;</arg> <arg fmt="%s" index="4">uUartWishboneSlave/uUartControl/Mtridata_DAT_O&lt;10&gt;</arg> signal will be lost.
</msg>

<msg type="warning" file="Xst" num="638" delta="old" >in unit <arg fmt="%s" index="1">INTERCON_P2P</arg> Conflict on KEEP property on signal <arg fmt="%s" index="2">uUartWishboneSlave/uUartControl/Mtridata_DAT_O&lt;29&gt;</arg> and <arg fmt="%s" index="3">uUartWishboneSlave/uUartControl/Mtridata_DAT_O&lt;10&gt;</arg> <arg fmt="%s" index="4">uUartWishboneSlave/uUartControl/Mtridata_DAT_O&lt;10&gt;</arg> signal will be lost.
</msg>

<msg type="warning" file="Xst" num="638" delta="old" >in unit <arg fmt="%s" index="1">INTERCON_P2P</arg> Conflict on KEEP property on signal <arg fmt="%s" index="2">uUartWishboneSlave/uUartControl/Mtridata_DAT_O&lt;30&gt;</arg> and <arg fmt="%s" index="3">uUartWishboneSlave/uUartControl/Mtridata_DAT_O&lt;10&gt;</arg> <arg fmt="%s" index="4">uUartWishboneSlave/uUartControl/Mtridata_DAT_O&lt;10&gt;</arg> signal will be lost.
</msg>

<msg type="warning" file="Xst" num="638" delta="old" >in unit <arg fmt="%s" index="1">INTERCON_P2P</arg> Conflict on KEEP property on signal <arg fmt="%s" index="2">uUartWishboneSlave/uUartControl/Mtridata_DAT_O&lt;31&gt;</arg> and <arg fmt="%s" index="3">uUartWishboneSlave/uUartControl/Mtridata_DAT_O&lt;10&gt;</arg> <arg fmt="%s" index="4">uUartWishboneSlave/uUartControl/Mtridata_DAT_O&lt;10&gt;</arg> signal will be lost.
</msg>

<msg type="warning" file="Xst" num="638" delta="old" >in unit <arg fmt="%s" index="1">INTERCON_P2P</arg> Conflict on KEEP property on signal <arg fmt="%s" index="2">uUartWishboneSlave/uUartControl/Mtridata_DAT_O&lt;8&gt;</arg> and <arg fmt="%s" index="3">uUartWishboneSlave/uUartControl/Mtridata_DAT_O&lt;10&gt;</arg> <arg fmt="%s" index="4">uUartWishboneSlave/uUartControl/Mtridata_DAT_O&lt;10&gt;</arg> signal will be lost.
</msg>

<msg type="info" file="Xst" num="2169" delta="old" >HDL ADVISOR - Some clock signals were not automatically buffered by XST with BUFG/BUFR resources. Please use the buffer_type constraint in order to insert these buffers to the clock signals to help prevent skew problems.
</msg>

</messages>

Go to most recent revision | Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.