URL
https://opencores.org/ocsvn/uart_block/uart_block/trunk
Subversion Repositories uart_block
[/] [uart_block/] [trunk/] [hdl/] [iseProject/] [divisor.vhd] - Rev 25
Go to most recent revision | Compare with Previous | Blame | View Log
--! Unsigned division circuit, based on slow division algorithm (Restoring division) --! http://en.wikipedia.org/wiki/Division_%28digital%29 library IEEE; use IEEE.STD_LOGIC_1164.ALL; use IEEE.std_logic_arith.all; --! Use CPU Definitions package use work.pkgDefinitions.all; entity divisor is Port ( rst : in STD_LOGIC; clk : in STD_LOGIC; quotient : out STD_LOGIC_VECTOR ((nBitsLarge-1) downto 0); reminder : out STD_LOGIC_VECTOR ((nBitsLarge-1) downto 0); numerator : in STD_LOGIC_VECTOR ((nBitsLarge-1) downto 0); divident : in STD_LOGIC_VECTOR ((nBitsLarge-1) downto 0); done : out STD_LOGIC); end divisor; architecture Behavioral of divisor is begin -- Division algorithm Q=N/D process (rst, clk, numerator, divident) variable Q : unsigned(quotient'length-1 downto 0); variable R : unsigned(reminder'length-1 downto 0); variable D : unsigned(reminder'length-1 downto 0); variable N : unsigned(reminder'length-1 downto 0); variable iteractions : integer; begin if (rst = '1') then quotient <= (others => '0'); reminder <= (others => '0'); done <= '0'; -- Initialize variables iteractions := quotient'length; D := unsigned(divident); N := unsigned(numerator); -- initialize quotient and remainder to zero Q := (others => '0'); R := (others => '0'); elsif rising_edge(clk) then if iteractions > 0 then iteractions := iteractions - 1; -- left-shift R by 1 bit R := (R((R'HIGH - 1) downto 0) & '0'); --set the least-significant bit of R equal to bit i of the numerator(dividend) R(0) := N(iteractions); if (R >= D) then R := R - D; Q(iteractions) := '1'; end if; else done <= '1'; quotient <= CONV_STD_LOGIC_VECTOR(Q,32); reminder <= CONV_STD_LOGIC_VECTOR(R,32); -- Used to avoid transparent latch (Good practise) D := unsigned(divident); N := unsigned(numerator); end if; end if; end process; end Behavioral;
Go to most recent revision | Compare with Previous | Blame | View Log