Subversion Repositories uart_block

--! Test serial_transmitter module
LIBRARY ieee;
USE ieee.std_logic_1164.ALL;
 
--! Use CPU Definitions package
use work.pkgDefinitions.all;
 
ENTITY testSerial_transmitter IS
END testSerial_transmitter;
 
ARCHITECTURE behavior OF testSerial_transmitter IS 
 
    -- Component Declaration for the Unit Under Test (UUT)
 
    COMPONENT serial_transmitter
    Port ( rst : in  STD_LOGIC;												--! Reset input
           baudClk : in  STD_LOGIC;											--! Baud rate clock input
           data_byte : in  STD_LOGIC_VECTOR ((nBits-1) downto 0);	--! Byte to be sent
			  data_sent : out STD_LOGIC;										--! Indicate that byte has been sent
           serial_out : out  STD_LOGIC);									--! Uart serial output
    END COMPONENT;
 
 
   --Inputs
   signal rst : std_logic := '0';													--! Signal to connect with UUT
   signal baudClk : std_logic := '0';												--! Signal to connect with UUT
   signal data_byte : std_logic_vector(7 downto 0) := (others => '0');	--! Signal to connect with UUT
 
 	--Outputs
   signal data_sent : std_logic;														--! Signal to connect with UUT
   signal serial_out : std_logic;													--! Signal to connect with UUT
 
   -- Clock period definitions
   constant baudClk_period : time := 10 ns;
 
BEGIN
 
	--! Instantiate the Unit Under Test (UUT)
   uut: serial_transmitter PORT MAP (
          rst => rst,
          baudClk => baudClk,
          data_byte => data_byte,
          data_sent => data_sent,
          serial_out => serial_out
        );
 
   -- Clock process definitions
   baudClk_process :process
   begin
		baudClk <= '0';
		wait for baudClk_period/2;
		baudClk <= '1';
		wait for baudClk_period/2;
   end process;
 
 
   -- Stimulus process
   stim_proc: process
   begin		
      -- Prepare the data to be sent 0x55
		rst <= '1';
		data_byte <= "01010101";
      wait for 50 ns;	
		rst <= '0';
 
      wait until data_sent = '1';
		wait for baudClk_period*3;
 
		-- Prepare the data to be sent
		rst <= '1';
		data_byte <= "11000100";
      wait for 50 ns;	
		rst <= '0';
 
      wait until data_sent = '1';
		wait for baudClk_period*3;
 
		-- Stop Simulation
		assert false report "NONE. End of simulation." severity failure;
 
      wait;
   end process;
 
END;